[1] S. Kheradmandi, “Seismic Vulnerability Assessment of Curved RC Box-Girder Bridges and Retrofitted with probabilistic methods”, A Thesis Submitted in Partial Fulfillment of the Requirement for the Degree of Master of Science in Civil Engineering, Iran University of Science and Technology, School of Civil Engineering, (2014).
[2] J. Mozer, C. Culver, Horizontally Curved Highway Bridges–Stability of Curved Plate Girders, Report No. P2, Report Submitted to the Department of Transportation, Federal Highway Administration, Department of Civil Engineering, Carnegie-Mellon University, Pittsburgh, Pennsylvania, (1970).
[3] C. Culver, Design recommendations for curved highway bridges (Final report for research project 68–32), Harrisburg: Pennsylvania Department of Transportation, USA, (1972).
[4] P.J. Brennan, Horizontally Curved Highway Bridges: Analysis and Structural Testing of a Multiple Configuration Small Scale Horizontally Curved Highway Bridge, Department of Civil Engineering, Syracuse University, 1974.
[5] A. Zureick, R. Naqib, J. Yadlosky, Curved steel bridge research project. Interim report I: Synthesis, HDR Engineering, Pittsburgh. Publication Number FHWA-RD-93-129, 1994.
[6] A. Zureick, D. Linzell, R. Leon, J. Burrell, Curved steel I-girder bridges: Experimental and analytical studies, Engineering Structures, 22(2) (2000) 180-190.
[7] C.H. Yoo, R.L. Carbine, Experimental investigation of horizontally curved steel wide flange beams analysis, Proceedings structural stability research council annual technical session: stability aspects of industrial buildings, (1985) 183-191.
[8] A.R. Khaloo, M. Kafimosavi, Enhancement of flexural design of horizontally curved prestressed bridges, Journal of bridge engineering, 12(5) (2007) 585-590.
[9] D.H. Tavares, J.E. Padgett, P. Paultre, Fragility curves of typical as-built highway bridges in eastern Canada, Engineering Structures, 40 (2012) 107-118.
[10] M. Mohseni, Dynamic Vulnerability Assessment of Highway and Railway Bridges, Ph.D. Dissertation, The College of Engineering at the University of Nebraska-Lincoln, (2012).
[11] N. Tondini, B. Stojadinovic, Probabilistic seismic demand model for curved reinforced concrete bridges, Bulletin of Earthquake Engineering, 10(5) (2012) 1455-1479.
[12] J. Jara, J. Reynoso, B. Olmos, M. Jara, Expected seismic performance of irregular medium-span simply supported bridges on soft and hard soils, Engineering Structures, 98 (2015) 174-185.
[13] M. Abbasi, B. Zakeri, G.G. Amiri, Probabilistic seismic assessment of multiframe concrete box-girder bridges with unequal-height piers, Journal of Performance of Constructed Facilities, 30(2) (2015) 04015016.
[14] H. Pahlavan, B. Zakeri, G.G. Amiri, M. Shaianfar, Probabilistic vulnerability assessment of horizontally curved multiframe RC box-girder highway bridges, Journal of Performance of Constructed Facilities, 30(3) (2015) 04015038.
[15] H.Pahlavan, “Probabilistic Seismic Assessment and Retrofitting of RC Bridges Using OpenSEES”, Azadeh Publishing, (2015).
[16] H.Pahlavan, Gh. Ghodrati Amiri, Mshaianfar, B. Zakeri, “Seismic Fragility Curve Development for Curved RC Box-Girder Bridges”, A Thesis Submitted in Partial Fulfillment of the Requirement for the Degree of Doctor of Philosophy in Earthquake Engineering, Iran University of Science and Technology, School of Civil Engineering, (2015).
[17] K.N. Ramanathan, Next generation seismic fragility curves for California bridges incorporating the evolution in seismic design philosophy, Georgia Institute of Technology, 2012.
[18] M. Yashinsky, M. Karshenas, Fundamentals of seismic protection for bridges, National Information Centre of Earthquake Engineering, 2003.
[19] G. Taylor, The propagation and decay of blast waves, The Scientific Papers of Sir Geoffrey Ingram Taylor, 3 (1939) 221-235.
[20] R.V. Nutt, Improved seismic design criteria for California bridges: Provisional recommendations, 1996.
[21] L. Duan, F. Li, Seismic design philosophies and performance-based design criteria, in: Bridge Engineering, CRC Press, 2003, pp. 155-189.
[22] J.B. Mander, Fragility curve development for assessing the seismic vulnerability of highway bridges, Research Progress and, 89 (1999).
[23] J.B. Mander, M.J. Priestley, R. Park, Theoretical stress-strain model for confined concrete, Journal of structural engineering, 114(8) (1988) 1804-1826.
[24] L. Scharge, Anchoring of bearings by friction, joint sealing and bearing systems for concrete structures, in: World congress on joints and bearings, 1981.
[25] S. Megalley, P. Silva, F. Seible, Seismic Response of Sacrificial Exterior Keys in Bridge Abutments, in, La Jolla, CA: Department of Structural Engineering, University of California, San Diego, 2002.
[26] M. Shinozuka, M.Q. Feng, X. Dong, T. Uzawa, T. Ueda, Damage assessment of a highway network under scenario earthquakes for emergency response decision support, in: Smart Structures and Materials 2000: Smart Systems for Bridges, Structures, and Highways, International Society for Optics and Photonics, 2000, pp. 264-276.
[27] J. Zhang, N. Makris, Seismic response analysis of highway overcrossings including soil–structure interaction, Earthquake engineering & structural dynamics, 31(11) (2002) 1967-1991.
[28] Standard No. 2800-05. Iranian code of practice for seismic resistant design of building. Third ed., Building and Housing Research Center, BHRC publication, Tehran, (2005).
[29] J.-S. Jeon, R. DesRoches, T. Kim, E. Choi, Geometric parameters affecting seismic fragilities of curved multi-frame concrete box-girder bridges with integral abutments, Engineering Structures, 122 (2016) 121-143.
[30] A. Mirza Goltabar Roshan, A. Naseri, Y. Mahmoodi Pati, Probabilistic evaluation of seismic vulnerability of multi-span bridges in northern of Iran, Journal of Structural and Construction Engineering, 5(1) (2018) 36-54.
[31] H. Pahlavan, B. Zakeri, G. Ghodrati Amiri, Probabilistic Performance Assessment of Retrofitted Horizontally Curved Multi-Frame RC Box-Girder Bridges, Journal of Earthquake and Tsunami, 11(04) (2017) 1750010.
)