[
1] J.M. Kelly, R. Skinner, A. Heine, Mechanisms of energy absorption in special devices for use in earthquake resistant structures, Bulletin of NZ Society for Earthquake Engineering, 5(3) (1972) 63-88.
[
2] K. Uetani, M. Tsuji, I. Takewaki, Application of an optimum design method to practical building frames with viscous dampers and hysteretic dampers, Engineering Structures, 25(5) (2003) 579-592.
[
3] M. Martinez-Rodrigo, M. Romero, An optimum retrofit strategy for moment resisting frames with nonlinear viscous dampers for seismic applications, Engineering Structures, 25(7) (2003) 913-925.
[
4] J.-S. Hwang, C.-H. Tsai, S.-J. Wang, Y.-N. Huang, Experimental study of RC building structures with supplemental viscous dampers and lightly reinforced walls, Engineering structures, 28(13) (2006) 1816-1824.
[
5] J.-S. Hwang, Y. Huang, Seismic design of structures with viscous dampers, International Training Programs for Seismic Design of Building Structures, 1112 (2002).
[
6] K. Miyamoto, A.S. Gilani, A. Wada, Collapse Hazard and Design Process of Essential Buildings with Dampers, in: China/USA Symp. for the Advancement of Earthquake Sciences and Hazard Mitigation Practices, 2008.
[
7] H. Roh, A.M. Reinhorn, Modeling and seismic response of structures with concrete rocking columns and viscous dampers, Engineering Structures, 32(8) (2010) 2096-2107.
[
8] B. Silwal, R.J. Michael, O.E. Ozbulut, A superelastic viscous damper for enhanced seismic performance of steel moment frames, Engineering Structures, 105 (2015) 152-164.
[
9] B. Silwal, O.E. Ozbulut, R.J. Michael, Seismic collapse evaluation of steel moment resisting frames with superelastic viscous damper, Journal of Constructional Steel Research, 126 (2016) 26-36.
[
10] J.-L. Lin, T.-H. Liu, K.-C. Tsai, Real-valued modal response history analysis for asymmetric-plan buildings with nonlinear viscous dampers, Soil Dynamics and Earthquake Engineering, 77 (2015) 97-110.
[
11] J. Kim, J. Lee, H. Kang, Seismic retrofit of special truss moment frames using viscous dampers, Journal of Constructional Steel Research, 123 (2016) 53-67.
[
12] A.S.o.C. Engineers, Minimum Design Loads for Buildings and Other Structures (ASCE/SEI 7-10), in, American Society of Civil Engineers, 2013.
[
13] A. AISC, Seismic provisions for structural steel buildings, in, Chicago, 2010.
[
14] J.-S. Hwang, Y.-N. Huang, S.-L. Yi, S.-Y. Ho, Design formulations for supplemental viscous dampers to building structures, Journal of structural engineering, 134(1) (2008) 22-31.
[
15] Y.X. Lu, Y.Q. Cai, Q.F. Qu, Q.H. Zhan, Study on the effect of supporting stiffness on energy dissipation efficiency of viscous dampers, in: Applied Mechanics and Materials, Trans Tech Publ, 2012, pp. 96-101.
[
16] D. Lignos, Sidesway collapse of deteriorating structural systems under seismic excitations, Stanford university, 2008.
[
17] D. Vamvatsikos, C.A. Cornell, Incremental dynamic analysis, Earthquake engineering & structural dynamics, 31(3) (2002) 491-514.
[
18] P. FEMA, Quantification of building seismic performance factors, in, Washington, DC, 2009.
[
19] S.J.V.G.D. Committee, S.J. Venture, S.E.A.o. California, A.T. Council, C.U.f.R.i.E. Engineering, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-frame Buildings, Federal Emergency Management Agency, 2000.
[
20] A. Constantinou, A. Whittaker, Y. Kalpakidis, D. Fenz, G. Warn, Performance of Seismic Isolation Hardware under Service and Seismic Loading (MCEER-07-0012), University at Buffalo, State University of New York, (2007).
[
21] K. Porter, R. Kennedy, R. Bachman, Developing fragility functions for building components for ATC-58, A Report to ATC-58. Applied Technology Council, Redwood City, CA, US, (2006).
[
15] Y.X. Lu, Y.Q. Cai, Q.F. Qu, Q.H. Zhan, Study on the effect of supporting stiffness on energy dissipation efficiency of viscous dampers, in: Applied Mechanics and Materials, Trans Tech Publ, 2012, pp. 96-101.
[
16] D. Lignos, Sidesway collapse of deteriorating structural systems under seismic excitations, Stanford university, 2008.
[
17] D. Vamvatsikos, C.A. Cornell, Incremental dynamic analysis, Earthquake engineering & structural dynamics, 31(3) (2002) 491-514.
[
18] P. FEMA, Quantification of building seismic performance factors, in, Washington, DC, 2009.
[
19] S.J.V.G.D. Committee, S.J. Venture, S.E.A.o. California, A.T. Council, C.U.f.R.i.E. Engineering, Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-frame Buildings, Federal Emergency Management Agency, 2000.
[
20] A. Constantinou, A. Whittaker, Y. Kalpakidis, D. Fenz, G. Warn, Performance of Seismic Isolation Hardware under Service and Seismic Loading (MCEER-07-0012), University at Buffalo, State University of New York, (2007).
[
21] K. Porter, R. Kennedy, R. Bachman, Developing fragility functions for building components for ATC-58, A Report to ATC-58. Applied Technology Council, Redwood City, CA, US, (2006).
[
22] R.O. Hamburger, D.A. Foutch, C. Cornell, Performance basis of guidelines for evaluation, upgrade and design of moment-resisting steel frames, in: Proc. of the Twelfth World Conference on Earthquake Engineering, Auckland, New Zealand, Paper, 2000.
[
23] D. Vamvatsikos, C.A. Cornell, The incremental dynamic analysis and its application to performance-based earthquake engineering, in: Proceedings of the 12th European conference on earthquake engineering, 2002.
[
24] N.I.o. Standards, Technology, Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors, in, FEMA Gaithersburg, MD, 2010.
[
25] F.E.M. Agency, FEMA 350 NEHRP Recommended Seismic Design Criteria for New Steel Moment‐Frame Buildings, (2000).
[
26] L.F. Ibarra, R.A. Medina, H. Krawinkler, Hysteretic models that incorporate strength and stiffness deterioration, Earthquake engineering & structural dynamics, 34(12) (2005) 1489-1511.
[
27] F. Zareian, H. Krawinkler, Assessment of probability of collapse and design for collapse safety, Earthquake Engineering & Structural Dynamics, 36(13) (2007) 1901-1914.
[
28] D.G. Lignos, H. Krawinkler, Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading, Journal of Structural Engineering, 137(11) (2011) 1291-1302.
[
29] M. Banazadeh, A. Ghanbari, Seismic performance assessment of steel moment-resisting frames equipped with linear and nonlinear fluid viscous dampers with the same damping ratio, Journal of Constructional Steel Research, 136 (2017) 215-228.
[
30] K. Kariniotakis, T.L. Karavasilis, Limits for the interstorey drift sensitivity coefficient θ of steel MRFs with viscous dampers designed according to Eurocode 8, Soil Dynamics and Earthquake Engineering, 117 (2019) 203-215.
[
31] N.D.K.R. Chukka, M. Krishnamurthy, Comparison of X-shaped metallic dampers with fluid viscous dampers and influence of their placement on seismic response of the building, Asian Journal of Civil Engineering, 20(6) (2019) 869-882.
[
32] J.-S. Hwang, W.-C. Lin, N.-J. Wu, Comparison of distribution methods for viscous damping coefficients to buildings, Structure and Infrastructure Engineering, 9(1) (2013) 28-41.
[
33] D.G. Lignos, H. Krawinkler, A database in support of modeling of component deterioration for collapse prediction of steel frame structures, in: Structural Engineering Research Frontiers, 2007, pp. 1-12.
[
34] A.K. Chopra, R.K. Goel, A modal pushover analysis procedure for estimating seismic demands for buildings, Earthquake engineering & structural dynamics, 31(3) (2002) 561-582.
)