رابطه مقاومت سطحی و عمق نفوذ آب در بتن با بکارگیری آزمون های کشیدن از سطح و محفظه استوانه ای و بسط یک تئوری نوین

نوع مقاله : مقاله پژوهشی

نویسندگان

1 استاد، دانشگاه بین‎المللی امام خمینی (ره)، قزوین، ایران

2 دکترای سازه، دانشگاه بین‌المللی امام خمینی (ره)، قزوین، ایران

3 گروه عمران سازه، دانشکده فنی مهندسی، دانشگاه بین المللی امام خمینی (ره) قزوین، ایران

چکیده

برای اندازه‌گیری نفوذپذیری بتن از مقدار عمق نفوذ آب در بتن استفاده می‌شود. در استانداردهای معتبر جهانی برای انجام این کار ابتدا آب تحت فشار وارد بتن شده و سپس با شکستن نمونه‌ی بتنی، مقدار عمق نفوذ آب به بتن اندازه‌گیری می‌شود. این درحالی است که اگر نیاز به ارزیابی دوام یک سازه‌ی بتنی یا منبع آب بتنی در محل باشد، هیچ آزمون درجای دقیقی جهت انجام این کار وجود ندارد. لذا در این مقاله ایتدا با استفاده از آزمون درجا و نوین محفظه استوانه‌ای مقدار عمق نفوذ آب در بتن اندازه‌گیری شده است. سپس با استفاده از ویژگی‌های ساختاری منافذ میکروسکوپی بتن که با استفاده از آزمون جیوه بدست می‌آید، مدل تئوری جدیدی ارائه شده است که با بکارگیری مدل مذکور می‌توان با دقت بالا مقدار عمق نفوذ آب در بتن را اندازه‌گیری نمود. ضمن مقایسه عمق نفوذ حاصل از آزمون محفظه استوانه‌ای و مدل تئوری جدید، مقدار مقاومت سطحی بتن با استفاده از آزمون کشیدن از سطح تعیین گردیده است. نتایج حاصله بیانگر رابطه معکوس بین مقاومت و عمق نفوذ آب در بتن می‌باشد. همچنین مشخص گردید که آزمون محفظه استوانه‌ای قابلیت اندازه‌گیری عمق نفوذ آب در بتن را بدون شکستن نمونه و با اطمینان بالای 93درصد دارا می‌باشد. معادلات نوین استخراج شده نیز دارای دقت بسیار بالایی جهت ارزیابی عمق نفوذ آب به بتن را نشان دادند.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

The relationship between strength and depth of water penetration in concrete by using pull-off and cylindrical chamber tests and developing a new theory

نویسندگان [English]

  • Mahmood Naderi 1
  • Ali Saberi Vaezaneh 2
  • Sardar Wali Din 3
1 Professor, Imam Khomeini International university, Qazvin, Iran.
2 Ph.D, Imam Khomeini International University, Qazvin, Iran.
3 Civil Engineering, Engineering Faculty, Imam Khomeini international University. (IKIU) Quzvin, Iran
چکیده [English]

The depth of water penetration in concrete is used to measure the permeability of concrete. In the valid international standards, to do this, first water under pressure enters the concrete, and then by breaking the concrete sample, the depth of water penetration into the concrete is measured. Meanwhile, if there is a need to evaluate the durability of a concrete structure or a concrete water source on site, there is no accurate on-site test to do this. Therefore, in this article, the depth of water penetration in concrete has been measured by using the in-situ and modern cylindrical chamber test. Then, using the structural characteristics of the microscopic pores of concrete, which is obtained by mercury test, a new theoretical model has been presented, which can be used to measure the water penetration depth in concrete with high accuracy. . While comparing the penetration depth obtained from the cylindrical chamber test and the new theoretical model, the surface resistance of concrete has been determined using the surface pull test. The obtained results show an inverse relationship between strength and water penetration depth in concrete. It was also found that the cylindrical chamber test has the ability to measure the depth of water penetration in concrete without breaking the sample and with a high confidence of 93%. The extracted new equations also showed very high accuracy to evaluate the depth of water penetration into concrete.

کلیدواژه‌ها [English]

  • Pull-off test
  • depth of penetration
  • concrete
  • new equations
  • permeability