Design and Development of Cyclic Pullout Test Apparatus

Document Type : Research Article

Authors

Abstract

This paper presents a recently developed automated pullout apparatus for soil-geogrid strength and deformation behavior investigation. The new apparatus is capable of applying load/displacement controlled monotonic/cyclic loads at different rates/frequencies, different wave shapes and loading patterns, through a computer closed-loop system. An extruded uniaxial geogrid and silica sand are used throughout the experiments. The effects of normal pressure (surcharge) and relative density are investigated on displacement distributions and pullout capacity of the geogrid in both monotonic and cyclic tests.
In monotonic tests, it is observed that with increase in relative density and surcharge, pullout resistance has increased. In cyclic tests, despite some minor observations of post-cyclic strength increased, no specific comment can be made at this stage on the post-cyclic strength.  

Keywords


[1] شیخ علی، وحید ( 1386 )، رفتار بیرونکشش ژئوگریدهای مدفون در ماسه، پروژه کارشناسی ارشد،دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر.
[2]ASTM D 6706-01, 2001. Standard test method for measuring geosynthetic pullout resistance in soil.ASTM, Philadelphia, PA, USA.
[3]Christopher, B.R., Gill, S.A., Giround, J.P., Juran, I., Mitchell, J.K., Schlosser, F., Dunnicliff, J., 1990.Design and construction guidelines for reinforced soil structures. vol. 1. Federal Highways Administration, U.S. Department of Transportation,Report No. FHWA RD-89-043.
[4]Min, Y., Leshchinky, D., Ling, H.I., Kaliakin, V.N., 1995. Effect of sustained and repeated tensile loads on geogrid embedded in sand. Geotechnical Testing journal, GTJODJ, vol. 18 (2), pp. 204-225.
[5]Moraci, N., Recalcati, P., 2006. Factors affecting the pullout behavior of extruded geogrids embedded in a compacted granular soil. Geotextiles and Geomembranes 24, 220-242.
[6]Nernheim, A. Meyer, N., 2004. Cyclic pull-out tests on geogrids. International Conference on Geotechnical Engineering (ICGE) in sharjah,United Arab Emirates, S. 339-346.
[7]Raju, D.M., 1995. Monotonic and cyclic pullout resistance of geosynthetics. Ph.D. Thesis. The University of British Columbia, Vancouver,Canada.
[8]Raju, D.M., Fannin, R.J., 1998. Load-strain- displacement response of geosynthetics in monotonic and cyclic pullout. Canadian
Geotechnical Journal 35, 183-193.
[9]Yasuda, S., Nagase, H., Mauri, H., 1992. Cyclic pull-out tests of geogrids in soils. International proceeding of earth reinforcement practice,Kyushu, Japan. Edited by H. Ochiai, S. Hayashi,and J. Otani. A.A. Balkema, Rotterdam, the Netherlands, pp. 185-190.