[1] Maulana, T. I., & Syamsi, M. I. (2023). Seismic performance improvement of reinforced concrete frame with vertical irregularity using buckling-restrained braces. AIP Conference Proceedings, 2846(1). AIP Publishing.
[2] Ghamari, M., Shooshtari, M., & Naeimi, S. (2022). Fragility Curves in Regular and Irregular Steel Structures Equipped with Buckling Restrained Braces. 4th International Conference on Steel & Structure, 14-15 December 2022, Olympic Hotel, Tehran, Iran.
[3] Niyonyungu, F., & Noroozinejad Farsangi, E. (2020). Application of buckling restrained braces to upgrade vertical stiffness of existing RC frames. Civil and Environmental Engineering Reports, 68-93.
https://doi.org/10.2478/ceer-2020-0034
[4] Orellana, G. M., Ramos, B. C., Velásquez, F., Casas Rius, J. R., & Delgadillo, R. M. (2024). Spectral Dynamic Analysis of Buckling Restrained Brace (BRB) Configurations in an Irregular Building. In Proceedings of the 9th International Conference on Civil Structural and Transportation Engineering (ICCSTE 2024) (pp. 1-6). University of Toronto Press.
[5] Vaziri, S. J., Vahdani, R., & Souri, O. (2024). Seismic evaluation of BRBF steel structures with L-shaped irregular plan considering soil-structure interaction. Bulletin of Earthquake Engineering, 22: 5347–5377.
https://doi.org/10.1007/s10518-024-01963-4
[6] Hoveidae, N., & Radpour, S. (2021). Performance evaluation of buckling-restrained braced frames under repeated earthquakes. Bulletin of Earthquake Engineering, 19(1): 241–262.
https://doi.org/10.1007/s10518-020-00983-0
[7] Wang, F., Shi, Q. X., & Wang, P. (2021, April). Seismic behaviour of reinforced concrete frame structures with all steel assembled Q195 low yield buckling restrained braces. Structures, 30: 756-773.
https://doi.org/10.1016/j.istruc.2021.01.051
[8] Li, B., Wang, J., Duan, M., Guo, L., & Wang, B. (2021). Cyclic experimental and numerical analytical investigation of precast concrete frames with buckling-restrained braces considering various assembling connections. Structures, 34: 1135-1153.
https://doi.org/10.1016/j.istruc.2021.08.022
[9] Bai, J., Chen, H., Zhao, J., Liu, M., & Jin, S. (2021). Seismic design and subassemblage tests of buckling-restrained braced RC frames with shear connector gusset connections. Engineering Structures, 234: 112018.
https://doi.org/10.1016/j.engstruct.2021.112018
[10] Zhao, J., Zhang, J., Song, J., Zhou, Y., Bai, J., & Yu, H. (2023). Sliding gusset connections for improved seismic performance of BRB-RC frame: Damage-control design and subassemblage tests. Engineering Structures, 282: 115828.
https://doi.org/10.1016/j.engstruct.2023.115828
[11] Zhao, J., Zhang, J., Song, J., Zhou, Y., Bai, J., & Yu, H. (2023). Sliding gusset connections for improved seismic performance of BRB-RC frame: Damage-control design and sub-assemblage tests. Engineering Structures, 282: 115828.
https://doi.org/10.1016/j.engstruct.2023.115828
[12] Kong, S., Shi, F., Zhou, Y., Ma, Y., & Xie, L. (2022). Influence of BRBs deformation capacity on the seismic performance of RC building frames. Soil Dynamics and Earthquake Engineering, 161: 107442.
https://doi.org/10.1016/j.soildyn.2022.107442
[13] Velasco, L., Hospitaler, A., & Guerrero, H. (2022). Optimal design of the seismic retrofitting of reinforced concrete framed structures using BRBs. Bulletin of Earthquake Engineering, 20(10): 5135-5160.
https://doi.org/10.1007/s10518-022-01394-z
[14] Bai, J., Chen, H., Jin, S., & You, T. (2022). Development of dual-parameter loading protocols for buckling-restrained braced RC frames considering variable axial loads. Engineering Structures, 262: 114388.
https://doi.org/10.1016/j.engstruct.2022.114388
[15] Ouyang, X., Zhang, Y., Ou, X., Shi, Y., Liu, S., & Fan, J. (2022). Seismic fragility analysis of buckling-restrained brace-strengthened reinforced concrete frames using a performance-based plastic design method. Structures, 43: 338-350.
https://doi.org/10.1016/j.istruc.2022.06.032
[16] Farahani, S., & Akhaveissy, A. H. (2022). Direct displacement-based seismic design of buckling-restrained braced RC frames. Bulletin of Earthquake Engineering, 20(3): 1767-1839.
https://doi.org/10.1007/s10518-021-01290-y
[17] Chen, H., & Bai, J. (2022). Loading protocols for seismic performance evaluation of buckling-restrained braces in RC frames. Journal of Building Engineering, 45: 103522.
https://doi.org/10.1016/j.jobe.2021.103522
[18] Bai, J., Chen, H., & Jin, S. (2021). Investigation on the interaction between BRBs and the RC frame in BRB-RCF systems. Engineering Structures, 243: 112685.
https://doi.org/10.1016/j.engstruct.2021.112685
[19] Rajabi, E., & Ghodrati Amiri, G. (2020). Generation of critical aftershocks using stochastic neural networks and wavelet packet transform. Journal of Vibration and Control, 26(5-6): 331-351.
https://doi.org/10.1177/1077546319879536
[20] Amiri, G. G., & Dana, F. M. (2005). Introduction of the most suitable parameter for selection of critical earthquake. Computers & structures, 83(8-9): 613-626.
https://doi.org/10.1016/j.compstruc.2004.10.010
[21] Abdollahzadeh, G., Mohammadgholipour, A., & Omranian, E. (2019). Seismic evaluation of steel moment frames under Mainshock–aftershock sequence designed by elastic design and PBPD methods. Journal of Earthquake Engineering, 23(10): 1605-1628.
https://doi.org/10.1080/13632469.2017.1387198
[22] Park, Y. J., Ang, A. H. S., & Wen, Y. K. (1985). Seismic damage analysis of reinforced concrete buildings. Journal of Structural Engineering, 111(4): 740-757.
https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(740)
[23] American Society of Civil Engineers. (2017). ASCE standard, ASCE/SEI, 41-17, seismic evaluation and retrofit of existing buildings.
