<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Developing the plastic analysis theory for braced frames and its optimization using genetic algorithm to predict the collapse of steel braced frames</ArticleTitle>
<VernacularTitle>Developing the plastic analysis theory for braced frames and its optimization using genetic algorithm to predict the collapse of steel braced frames</VernacularTitle>
			<FirstPage>421</FirstPage>
			<LastPage>438</LastPage>
			<ELocationID EIdType="pii">3177</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2018.15001.5819</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Amir</FirstName>
					<LastName>Saedi Daryan</LastName>
<Affiliation></Affiliation>

</Author>
<Author>
					<FirstName>Soheil</FirstName>
					<LastName>Palizi</LastName>
<Affiliation>M.Sc. of Earthquake Engineering, Faculty of Civil Engineering, Shahid Beheshti University, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>09</Month>
					<Day>28</Day>
				</PubDate>
			</History>
		    <Abstract>The plastic analysis method is one of the most effective and most used methods in this field. Analysis of moment frames has been carried out with the aid of simple plastic analysis by many researchers. However, the analysis of braced frames due to the buckling of braces and the presence of axial and shear forces simultaneously in the frame members is very complex, and therefore, little research has been done in this area. In this research, a special theory based on a combination of mechanisms method for the plastic analysis of steel braced frames has been presented. Using the genetic algorithm, a program has been proposed to determine the failure mechanism and collapse load of the steel braced frames based on this methodology. The comparison of the results shows that the proposed formula is very accurate and can accurately determine the failure mode and its corresponding load. According to this, three arbitrary frames with differences in the number of stories are investigated. The collapse mechanism corresponding to the critical load factor is obtained using of the Genetic optimization algorithm and the virtual work theory. For Verification, a pushover analysis is performed for the determination of the collapse mode of each frame. In examples one and two which the frames are low-rise, the solution is the same, while in the third example, a slight difference is observed in the location of hinge formations. However, this error had been observed in moment frames due to the difference of the principals in the two applied analysis.</Abstract>
			<OtherAbstract Language="FA">The plastic analysis method is one of the most effective and most used methods in this field. Analysis of moment frames has been carried out with the aid of simple plastic analysis by many researchers. However, the analysis of braced frames due to the buckling of braces and the presence of axial and shear forces simultaneously in the frame members is very complex, and therefore, little research has been done in this area. In this research, a special theory based on a combination of mechanisms method for the plastic analysis of steel braced frames has been presented. Using the genetic algorithm, a program has been proposed to determine the failure mechanism and collapse load of the steel braced frames based on this methodology. The comparison of the results shows that the proposed formula is very accurate and can accurately determine the failure mode and its corresponding load. According to this, three arbitrary frames with differences in the number of stories are investigated. The collapse mechanism corresponding to the critical load factor is obtained using of the Genetic optimization algorithm and the virtual work theory. For Verification, a pushover analysis is performed for the determination of the collapse mode of each frame. In examples one and two which the frames are low-rise, the solution is the same, while in the third example, a slight difference is observed in the location of hinge formations. However, this error had been observed in moment frames due to the difference of the principals in the two applied analysis.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Plastic Analysis</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Kinematic Theory</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Braced frame</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">optimization</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">genetic algorithm</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3177_d3630410c51e60941a9001a46871070e.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Sulfate Removal from Water Using Activated Red Mud: Kinetic, Isotherm and Thermodynamic Studies</ArticleTitle>
<VernacularTitle>Sulfate Removal from Water Using Activated Red Mud: Kinetic, Isotherm and Thermodynamic Studies</VernacularTitle>
			<FirstPage>439</FirstPage>
			<LastPage>456</LastPage>
			<ELocationID EIdType="pii">3266</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.15356.5894</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Alireza Arhami</FirstName>
					<LastName>Dolat Abad</LastName>
<Affiliation>Tarbiat Modares University, Civil and Environmental Engineering Faculty, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Hossein</FirstName>
					<LastName>Ganjidoust</LastName>
<Affiliation></Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>11</Month>
					<Day>28</Day>
				</PubDate>
			</History>
		    <Abstract>In this study, the absorption of sulfates on activated aluminum industry waste (red mud) has been investigated in a batch system by the OFAT method. The properties of the absorbent were analyzed using a scanning electron microscope (SEM), BET surface area, X-ray diffraction (XRD), XRF. The process of sulfate absorption was done in a volume of 200 mL and a mixer speed of 150 rpm. The optimum absorption conditions were derived in an equilibrium time of 90 minutes, initial concentration of 100 ppm, pH=4, the temperature of 65 ◦C, and 7.5 g/L doses of the absorbent. The efficiency of sulfate removal was 73.1 percent at the optimum conditions. Thermodynamic analysis of absorption showed that the absorption process at all analyzed temperatures had occurred spontaneously. Sulfate absorption kinetics on composite surfaces followed a pseudo second-order equation and absorption isotherm had high conformity with Langmuir isotherm (r=0.994) and the maximum absorption capacity of it according to Langmuir isotherm is 13.07 mg of sulfate per gram of the absorbent.</Abstract>
			<OtherAbstract Language="FA">In this study, the absorption of sulfates on activated aluminum industry waste (red mud) has been investigated in a batch system by the OFAT method. The properties of the absorbent were analyzed using a scanning electron microscope (SEM), BET surface area, X-ray diffraction (XRD), XRF. The process of sulfate absorption was done in a volume of 200 mL and a mixer speed of 150 rpm. The optimum absorption conditions were derived in an equilibrium time of 90 minutes, initial concentration of 100 ppm, pH=4, the temperature of 65 ◦C, and 7.5 g/L doses of the absorbent. The efficiency of sulfate removal was 73.1 percent at the optimum conditions. Thermodynamic analysis of absorption showed that the absorption process at all analyzed temperatures had occurred spontaneously. Sulfate absorption kinetics on composite surfaces followed a pseudo second-order equation and absorption isotherm had high conformity with Langmuir isotherm (r=0.994) and the maximum absorption capacity of it according to Langmuir isotherm is 13.07 mg of sulfate per gram of the absorbent.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Adsorption</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Red mud</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Activated red mud</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Sulfate</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Thermodynamics</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3266_ac73001b1d44f4925449ce09d9f5d5ca.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Probabilistic Seismic Assessment of RC Buildings Considering Soft and Extreme Soft Story irregularities Subjected to Main Shock-Aftershock Sequences</ArticleTitle>
<VernacularTitle>Probabilistic Seismic Assessment of RC Buildings Considering Soft and Extreme Soft Story irregularities Subjected to Main Shock-Aftershock Sequences</VernacularTitle>
			<FirstPage>457</FirstPage>
			<LastPage>478</LastPage>
			<ELocationID EIdType="pii">3305</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.15385.5906</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Hamed</FirstName>
					<LastName>Kouhestanian</LastName>
<Affiliation>Faculty of civil engineering, SHahrood university of technology</Affiliation>

</Author>
<Author>
					<FirstName>Hossein</FirstName>
					<LastName>Pahlavan</LastName>
<Affiliation>faculty of civil engineering, Shahrood university of technology,</Affiliation>
<Identifier Source="ORCID">0000-0002-7016-9683</Identifier>

</Author>
<Author>
					<FirstName>Jalil</FirstName>
					<LastName>Shafaei</LastName>
<Affiliation>Faculty of Civil engineering, Shahrood University of Technology, Shahrood, Semnan, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-7590-4042</Identifier>

</Author>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Shamekhi Amiri</LastName>
<Affiliation>Assistant Professor of Civil Engineering; Shahrood University of Technology</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>12</Month>
					<Day>04</Day>
				</PubDate>
			</History>
		    <Abstract>Recent Iranian earthquake damages like the damages caused by the Kermanshah earthquake revealed that RC buildings having soft-story irregularities experienced more seismic vulnerability. Moreover, earthquake aftershocks increased the seismic failures in past earthquake events. But they are not included in recent seismic design codes. In this article, for assessing the effects of soft-story irregularities and also the earthquake aftershocks, 3,5 and 8 story RC models having intermediate sway frames are designed and then modeled in OPENSEES and then IDA analysis is performed in order to produce the seismic fragility curves consistent with HAZUS definitions. The resulting seismic fragility curves revealed the influence of soft-story irregularities and also main shock-aftershock sequences on the vulnerability of considered RC models. By increasing the height of the RC structures, the effects of soft-story irregularities and the aftershocks decreased in the seismic vulnerability of the considered buildings.</Abstract>
			<OtherAbstract Language="FA">Recent Iranian earthquake damages like the damages caused by the Kermanshah earthquake revealed that RC buildings having soft-story irregularities experienced more seismic vulnerability. Moreover, earthquake aftershocks increased the seismic failures in past earthquake events. But they are not included in recent seismic design codes. In this article, for assessing the effects of soft-story irregularities and also the earthquake aftershocks, 3,5 and 8 story RC models having intermediate sway frames are designed and then modeled in OPENSEES and then IDA analysis is performed in order to produce the seismic fragility curves consistent with HAZUS definitions. The resulting seismic fragility curves revealed the influence of soft-story irregularities and also main shock-aftershock sequences on the vulnerability of considered RC models. By increasing the height of the RC structures, the effects of soft-story irregularities and the aftershocks decreased in the seismic vulnerability of the considered buildings.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Probabilistic Assessment</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Reinforced Concrete Moment-Resisting Frame</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Soft Story</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fragility Curves</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">incremental dynamic analysis (IDA)</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3305_b848edae25876384476f8970b8491160.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigation of circular concrete-filled double-skin steel tubular (CFDST) columns under Axial Compressive Load</ArticleTitle>
<VernacularTitle>Investigation of circular concrete-filled double-skin steel tubular (CFDST) columns under Axial Compressive Load</VernacularTitle>
			<FirstPage>479</FirstPage>
			<LastPage>494</LastPage>
			<ELocationID EIdType="pii">3307</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.15430.5918</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Amir</FirstName>
					<LastName>Mokhtari</LastName>
<Affiliation>MSc Student in Structural Engineering of, Faculty of Civil Engineering, University of Eyvanakey</Affiliation>

</Author>
<Author>
					<FirstName>Hamid</FirstName>
					<LastName>Saberi</LastName>
<Affiliation>civil engineering faculty, eyvanekey university,semnan.iran</Affiliation>

</Author>
<Author>
					<FirstName>Vesam</FirstName>
					<LastName>Kolmi Zadeh</LastName>
<Affiliation>MSc Student in Structural Engineering of, Faculty of Civil Engineering, University of Eyvanakey</Affiliation>

</Author>
<Author>
					<FirstName>Vahid</FirstName>
					<LastName>Saberi</LastName>
<Affiliation>Assistant Professor, Faculty of Civil Engineering, University of Eyvanakey</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>12</Month>
					<Day>11</Day>
				</PubDate>
			</History>
		    <Abstract>Two-layer composite columns are a family of single-layer composite columns consisting of two circular steel tubes, which are assembled in a center and are filled with concrete. In this type of column, the important effect of concrete is that it delays local buckling of the steel skin and that the concrete in its confined state can tolerate higher strains and tensions than the non-confined state. The advantages of two-layer composite columns, in comparison to single-layer columns, can be attributed to the lower weight of two-layer composite columns, more ductility, and greater axial force strengthening. The behavior of these columns under pure axial load is of interest. Therefore, the study of the behavior of two-layer composite columns under the influence of axial load is of particular importance due to the behavior close to the reality in these columns. In this paper, the capacity of double-skin steel columns filled with concrete has been investigated using ABAQUS finite element, under the influence of axial stress. in this paper, sections were compared with changing the thickness of the layers and the diameter of the inner core, and the existence and absence of concrete core. the results showed that the diameter of the tube increases with increasing the core diameter and the effective parameter in this issue is the ratio of thickness to diameter (D/t). In the discussion of the existence and absence of concrete in the core, the confinement effect has an important result and has increased the load strength capacity of the columns.</Abstract>
			<OtherAbstract Language="FA">Two-layer composite columns are a family of single-layer composite columns consisting of two circular steel tubes, which are assembled in a center and are filled with concrete. In this type of column, the important effect of concrete is that it delays local buckling of the steel skin and that the concrete in its confined state can tolerate higher strains and tensions than the non-confined state. The advantages of two-layer composite columns, in comparison to single-layer columns, can be attributed to the lower weight of two-layer composite columns, more ductility, and greater axial force strengthening. The behavior of these columns under pure axial load is of interest. Therefore, the study of the behavior of two-layer composite columns under the influence of axial load is of particular importance due to the behavior close to the reality in these columns. In this paper, the capacity of double-skin steel columns filled with concrete has been investigated using ABAQUS finite element, under the influence of axial stress. in this paper, sections were compared with changing the thickness of the layers and the diameter of the inner core, and the existence and absence of concrete core. the results showed that the diameter of the tube increases with increasing the core diameter and the effective parameter in this issue is the ratio of thickness to diameter (D/t). In the discussion of the existence and absence of concrete in the core, the confinement effect has an important result and has increased the load strength capacity of the columns.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Concrete-filled double-skin steel tubular</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">CFDST</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Axial load</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">circular columns</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">finite element method</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Abaqus</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3307_d7aab42e6b85c49c0f1d3a115e939c74.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Site Layout Optimization and its Impact on the Cost of Construction Projects</ArticleTitle>
<VernacularTitle>Site Layout Optimization and its Impact on the Cost of Construction Projects</VernacularTitle>
			<FirstPage>495</FirstPage>
			<LastPage>514</LastPage>
			<ELocationID EIdType="pii">4135</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.15506.5945</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Mohammad Javad</FirstName>
					<LastName>Taheri Amiri</LastName>
<Affiliation>Assistant Professor, Department of civil engineering, Higher Education Institute of Pardisan</Affiliation>

</Author>
<Author>
					<FirstName>Milad</FirstName>
					<LastName>Hematian</LastName>
<Affiliation>PhD student in industrial engineering, Mazandaran University of Science and Technology</Affiliation>

</Author>
<Author>
					<FirstName>Farshidreza</FirstName>
					<LastName>Haghighi</LastName>
<Affiliation></Affiliation>

</Author>
<Author>
					<FirstName>Maedeh</FirstName>
					<LastName>Javaheri Barforooshi</LastName>
<Affiliation>PhD student in construction engineering and management, Islamic Azad University, Arak Branch</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>12</Month>
					<Day>30</Day>
				</PubDate>
			</History>
		    <Abstract>The dynamic site layout is identifying the optimum location for temporary equipment, materials, and other available tools and offices at construction sites. The Site layout is classified as a dynamic problem because the necessary equipment is changed continuously during the project lifetime. Some research investigated this issue in recent years and tried to develop various algorithms to solve such problems due to its complexity. In this study, a linear programming model is proposed to minimize total transportation cost among different parts, relocation cost for the moveable facility, and transportation cost between the warehouse and other parts. An invasive weed optimization algorithm is developed to solve large-scale problems. Computational results show that different layout is obtained based on priorities considered for each part so that their layout can be changed if priority is varied. To validate the proposed algorithm, its results for the small-scale problem are compared with results obtained from solving it in GAMS software. Results obtained from the proposed algorithm for small problems reveal that they are so close to obtained from the exact method. Furthermore, scenario analysis indicates that the proposed metaheuristic algorithm is outperformed, thus the proposed IWO algorithm can be applied for solving the large-scale problem in the real world.</Abstract>
			<OtherAbstract Language="FA">The dynamic site layout is identifying the optimum location for temporary equipment, materials, and other available tools and offices at construction sites. The Site layout is classified as a dynamic problem because the necessary equipment is changed continuously during the project lifetime. Some research investigated this issue in recent years and tried to develop various algorithms to solve such problems due to its complexity. In this study, a linear programming model is proposed to minimize total transportation cost among different parts, relocation cost for the moveable facility, and transportation cost between the warehouse and other parts. An invasive weed optimization algorithm is developed to solve large-scale problems. Computational results show that different layout is obtained based on priorities considered for each part so that their layout can be changed if priority is varied. To validate the proposed algorithm, its results for the small-scale problem are compared with results obtained from solving it in GAMS software. Results obtained from the proposed algorithm for small problems reveal that they are so close to obtained from the exact method. Furthermore, scenario analysis indicates that the proposed metaheuristic algorithm is outperformed, thus the proposed IWO algorithm can be applied for solving the large-scale problem in the real world.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Dynamic site layout</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">IWO algorithm</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Layout cost reduction</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Construction Project</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">facility location</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_4135_46fc943ecd56441056a560ba37d0b9e8.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Performance Based Plastic Design of Steel Moment Frame and Comparing It with Force Based Design</ArticleTitle>
<VernacularTitle>Performance Based Plastic Design of Steel Moment Frame and Comparing It with Force Based Design</VernacularTitle>
			<FirstPage>515</FirstPage>
			<LastPage>534</LastPage>
			<ELocationID EIdType="pii">3424</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.15827.6044</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Fatemeh</FirstName>
					<LastName>Mousavinejad</LastName>
<Affiliation>Civil engineering department, faculty of engineering, University of Kashan</Affiliation>

</Author>
<Author>
					<FirstName>Hassan</FirstName>
					<LastName>Ostad-Hossein</LastName>
<Affiliation>Civil engineering department, Faculty of engineering, University of Kashan, Kashan, Iran.</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>02</Month>
					<Day>14</Day>
				</PubDate>
			</History>
		    <Abstract>In conventional seismic design methods the performance of structure has not been considered in base shear estimation and structural drift, as a measure of damage, will be checked at the end of design stages. This weakness of force-based design (FBD) methods causes special attention to performance-based design. Performance-based plastic design (PBPD) is of performance-based design (PBD) in which the desired damage level and plastic mechanism of the structure are predefined at the beginning of the design procedure, to estimate internal forces. It is expected that applying PBPD ends to a structural behavior with more compliance with the desired mechanism. In this paper, the priority of PBPD over FBD has been investigated. The PBPD and FBD methods are applied to the design of four special steel moment frames of 4, 8, 12, and 16 stories. The nonlinear behavior of designed structures has been evaluated by push-over and nonlinear time history analysis. Analysis results show that the PBPD frame has mechanism mode closer to assumed mechanism mode in the design procedure. Another conclusion is that the PBPD frame mechanism in the push-over analysis is more ductile than the FBD frame. Also, it concluded that in the PBPD frame, plastic hinges are approximately distributed uniformly all over the structure. The general reason for PBPD ductility improvement, versus FBD, is the strength of columns which prevent undesirable mechanism.</Abstract>
			<OtherAbstract Language="FA">In conventional seismic design methods the performance of structure has not been considered in base shear estimation and structural drift, as a measure of damage, will be checked at the end of design stages. This weakness of force-based design (FBD) methods causes special attention to performance-based design. Performance-based plastic design (PBPD) is of performance-based design (PBD) in which the desired damage level and plastic mechanism of the structure are predefined at the beginning of the design procedure, to estimate internal forces. It is expected that applying PBPD ends to a structural behavior with more compliance with the desired mechanism. In this paper, the priority of PBPD over FBD has been investigated. The PBPD and FBD methods are applied to the design of four special steel moment frames of 4, 8, 12, and 16 stories. The nonlinear behavior of designed structures has been evaluated by push-over and nonlinear time history analysis. Analysis results show that the PBPD frame has mechanism mode closer to assumed mechanism mode in the design procedure. Another conclusion is that the PBPD frame mechanism in the push-over analysis is more ductile than the FBD frame. Also, it concluded that in the PBPD frame, plastic hinges are approximately distributed uniformly all over the structure. The general reason for PBPD ductility improvement, versus FBD, is the strength of columns which prevent undesirable mechanism.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Performance based plastic design</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">force based design</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Push over Analysis</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">time history analysis</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">performance objectives</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3424_71a5c0514ab83382d98154e5a5f9d813.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Using pre-splitting controlled blasting method and comparing it with non-control method in Chehel Kooreh copper mine</ArticleTitle>
<VernacularTitle>Using pre-splitting controlled blasting method and comparing it with non-control method in Chehel Kooreh copper mine</VernacularTitle>
			<FirstPage>535</FirstPage>
			<LastPage>554</LastPage>
			<ELocationID EIdType="pii">3520</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.15931.6081</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Milad</FirstName>
					<LastName>Ghasemvand</LastName>
<Affiliation>Imam Khomeini International university</Affiliation>

</Author>
<Author>
					<FirstName>Mehdi</FirstName>
					<LastName>Hosseini</LastName>
<Affiliation>Imam Khomeini international university</Affiliation>

</Author>
<Author>
					<FirstName>Mohammad Reza</FirstName>
					<LastName>Hemmati</LastName>
<Affiliation>Kavoshgaran Consulting Engineers</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>03</Month>
					<Day>06</Day>
				</PubDate>
			</History>
		    <Abstract>In blasting operations in tunnels, the occurrence of back breaks caused by the high energy content of explosives leads to many problems. This project, it is tried to solve the problems caused by non-controlling blasting by controlled blasting in a pre-splitting method in one of the march tunnels of the Chehel Kooreh mine in Zahedan. To design the blasting pattern in the tunnel section, the &quot;theory of energy transfer&quot; and &quot;nitronobel (Swedish) methods&quot; were investigated with parallel and angular holes, which ultimately led to a blast pattern based on the &quot;energy transfer theory&quot; with parallel holes as the final design of the selection And the control hole pattern was also designed in a &quot;pre-splitting&quot; manner. Finally, the proposed design was implemented in the march tunnel of the Chehel Kooreh mine. Finding the results of the blasting based on the proposed design showed that the face and the roof and walls were much smoother than the blasting based operation according to the current design, which would result in more and better matching of the units with the walls and roof And preventing increased stress concentration on them. To evaluate the pre-splitting controlled blasting performance, the QCB factor is used quantitatively, after which the factor was used, the controlled blasting performance of the Chehel Kooreh mine march tunnel was excellent based on the proposed design.</Abstract>
			<OtherAbstract Language="FA">In blasting operations in tunnels, the occurrence of back breaks caused by the high energy content of explosives leads to many problems. This project, it is tried to solve the problems caused by non-controlling blasting by controlled blasting in a pre-splitting method in one of the march tunnels of the Chehel Kooreh mine in Zahedan. To design the blasting pattern in the tunnel section, the &quot;theory of energy transfer&quot; and &quot;nitronobel (Swedish) methods&quot; were investigated with parallel and angular holes, which ultimately led to a blast pattern based on the &quot;energy transfer theory&quot; with parallel holes as the final design of the selection And the control hole pattern was also designed in a &quot;pre-splitting&quot; manner. Finally, the proposed design was implemented in the march tunnel of the Chehel Kooreh mine. Finding the results of the blasting based on the proposed design showed that the face and the roof and walls were much smoother than the blasting based operation according to the current design, which would result in more and better matching of the units with the walls and roof And preventing increased stress concentration on them. To evaluate the pre-splitting controlled blasting performance, the QCB factor is used quantitatively, after which the factor was used, the controlled blasting performance of the Chehel Kooreh mine march tunnel was excellent based on the proposed design.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">controlled blasting</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">pre-splitting</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">tunneling</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">mine</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Chehel kooreh copper</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3520_6c0958d82a830a02c0718147b1b565c1.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Life cycle cost analysis (LCCA) of railway tracks maintenance decisions using the Markov forecast model based on the track recording machine data</ArticleTitle>
<VernacularTitle>Life cycle cost analysis (LCCA) of railway tracks maintenance decisions using the Markov forecast model based on the track recording machine data</VernacularTitle>
			<FirstPage>555</FirstPage>
			<LastPage>574</LastPage>
			<ELocationID EIdType="pii">4118</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.15952.6122</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Seyed Elyas</FirstName>
					<LastName>Hashemian</LastName>
<Affiliation>Dept of Civil Engineering, Transportation &amp;amp;amp; Highway group,PhD
.Amirkabir University of Technology - Tehran Polytechnic</Affiliation>

</Author>
<Author>
					<FirstName>Yousef</FirstName>
					<LastName>Shafahi</LastName>
<Affiliation>Department of Civil Engineering, Sharif University of Technology</Affiliation>

</Author>
<Author>
					<FirstName>Fereydoon</FirstName>
					<LastName>Moghaddasnezhad</LastName>
<Affiliation>Department of Civil Engineering, Amirkabir University of Technology</Affiliation>
<Identifier Source="ORCID">0000-0003-3830-4555</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>04</Month>
					<Day>07</Day>
				</PubDate>
			</History>
		    <Abstract>Rail transportation system plays an important role in the development of the economies of the countries. This system will be worn over time by operation and weather conditions and will require maintenance. One of the goals of this operation is to keep the tracks in an acceptable condition and prevent their excessive deviation from the optimal situation. Railways maintenance and repair management system has been studied and implemented to optimize activities and reduce related costs. Such systems have used various techniques to predict the future state of failure. Choosing the best maintenance policy is the goal of these systems. For policymaking, the best and most cost-effective option, life-cycle cost analysis is required. In the following, with help of the Markov prediction model, the life cycle cost (LCC) model is suggested for rail and ballast. In the end, it was found that the main costs in the ballast part are renewal costs and the track unavailability costs. The effect of renewal tonnage on these two costs is far higher than other costs. As you can see, the lowest ballast life cycle cost in the range of 100 to 150 million gross tons. In this study, assuming annual tonnage (16 million gross tonnages) as previously mentioned, it results in a renewal life of about 6 to 10 years. This value for the rails is from 500 to 540 million gross tons, which is equivalent to 30 to 35 years.</Abstract>
			<OtherAbstract Language="FA">Rail transportation system plays an important role in the development of the economies of the countries. This system will be worn over time by operation and weather conditions and will require maintenance. One of the goals of this operation is to keep the tracks in an acceptable condition and prevent their excessive deviation from the optimal situation. Railways maintenance and repair management system has been studied and implemented to optimize activities and reduce related costs. Such systems have used various techniques to predict the future state of failure. Choosing the best maintenance policy is the goal of these systems. For policymaking, the best and most cost-effective option, life-cycle cost analysis is required. In the following, with help of the Markov prediction model, the life cycle cost (LCC) model is suggested for rail and ballast. In the end, it was found that the main costs in the ballast part are renewal costs and the track unavailability costs. The effect of renewal tonnage on these two costs is far higher than other costs. As you can see, the lowest ballast life cycle cost in the range of 100 to 150 million gross tons. In this study, assuming annual tonnage (16 million gross tonnages) as previously mentioned, it results in a renewal life of about 6 to 10 years. This value for the rails is from 500 to 540 million gross tons, which is equivalent to 30 to 35 years.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Life Cycle Cost</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Quality index</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Rail and ballast</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Markov Predication Model</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Railway Infrastructure</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_4118_de3c1a733c9c51de130bc7ae775fd930.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Effect of Lead Nitrate on the Behavior and Shear Strength Parameters of clayey sand</ArticleTitle>
<VernacularTitle>Effect of Lead Nitrate on the Behavior and Shear Strength Parameters of clayey sand</VernacularTitle>
			<FirstPage>575</FirstPage>
			<LastPage>588</LastPage>
			<ELocationID EIdType="pii">3497</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.16146.6142</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Mahmoud</FirstName>
					<LastName>Hassanlourad</LastName>
<Affiliation></Affiliation>

</Author>
<Author>
					<FirstName>Mohmmad</FirstName>
					<LastName>Hossein Zade</LastName>
<Affiliation>Civil Engineering Department, Imam Khomeini International University, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>Seyed Abolhassan</FirstName>
					<LastName>Naeini</LastName>
<Affiliation>Civil Engineering department, Imam Khomeini International University, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>04</Month>
					<Day>16</Day>
				</PubDate>
			</History>
		    <Abstract>By the expansion of the industrial zones, heavy metals enter the environment, which contaminates the soil and groundwater. The leakage of heavy metals such as lead, zinc, copper, etc. is not only an environmental crisis but also causes changes in soil shear resistance parameters. In this research, with triaxial tests, the behavior of sandy soils with different percentages of kaolinite in two cases of non-contaminated and contaminated with lead is investigated. It was seen that by increasing the lead concentration, the hydrogen bonding between kaolinite particles and the resistance of contaminated soils reduces. Then, to investigate the effect of clay minerals on contaminated soils, the shear resistance parameters of soil with kaolinite and bentonite clay were compared. The results showed, clay minerals in contaminated soils, resulted in different shear behavior and resistance parameters, so that, increasing the lead concentration in bentonite causes the shear strength to increase.</Abstract>
			<OtherAbstract Language="FA">By the expansion of the industrial zones, heavy metals enter the environment, which contaminates the soil and groundwater. The leakage of heavy metals such as lead, zinc, copper, etc. is not only an environmental crisis but also causes changes in soil shear resistance parameters. In this research, with triaxial tests, the behavior of sandy soils with different percentages of kaolinite in two cases of non-contaminated and contaminated with lead is investigated. It was seen that by increasing the lead concentration, the hydrogen bonding between kaolinite particles and the resistance of contaminated soils reduces. Then, to investigate the effect of clay minerals on contaminated soils, the shear resistance parameters of soil with kaolinite and bentonite clay were compared. The results showed, clay minerals in contaminated soils, resulted in different shear behavior and resistance parameters, so that, increasing the lead concentration in bentonite causes the shear strength to increase.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Lead nitrate</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Kaolinite</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Bentonite</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Triaxial Test</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Shear Strength Parameters</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3497_7535bbb91c8fde347ad861f293126633.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Damage detection in continuous deck bridges using statistical cross-correlation function method</ArticleTitle>
<VernacularTitle>Damage detection in continuous deck bridges using statistical cross-correlation function method</VernacularTitle>
			<FirstPage>589</FirstPage>
			<LastPage>606</LastPage>
			<ELocationID EIdType="pii">3812</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.16248.6173</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Mohammad Javad</FirstName>
					<LastName>Khosraviani</LastName>
<Affiliation>Department of Civil Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Omid</FirstName>
					<LastName>Bahar</LastName>
<Affiliation>Faculty/International Institute of Earthquake Engineering &amp;amp; Seismology (IIEES)</Affiliation>

</Author>
<Author>
					<FirstName>Seyed Hooman</FirstName>
					<LastName>Ghasemi</LastName>
<Affiliation>Department of Civil Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>05</Month>
					<Day>04</Day>
				</PubDate>
			</History>
		    <Abstract>The damage detection (DD) of the bridge has always been a major concern for engineers. This paper attempts to detect damage in the continuous deck bridges by providing a new method based on acceleration responses and their instantaneous amplitudes. The DD in this paper has two steps: firstly, determining the vicinity of damage in global DD. Secondly, determining the location of damage in local DD. Then by acceleration signals, the instantaneous amplitude values of healthy and damaged structural responses are extracted via HHT. Further, for the accurate evaluation of the proposed method, damage locations are determined by the cross-correlation damage index (DICC). To assess the feasibility and reliability of proposed methods, several analytical models of concrete bridges of one to three spans, as well as as experimental model of a simply supported steel beam, have been used. In order to consider noise pollution during data acquisition, a certain amount of noise is added to the response. The results in the analytical and experimental models showed that the proposed methods can determine the damage locations with appropriate accuracy for different damage scenarios and it could provide more exact results with a rapid estimation.  </Abstract>
			<OtherAbstract Language="FA">The damage detection (DD) of the bridge has always been a major concern for engineers. This paper attempts to detect damage in the continuous deck bridges by providing a new method based on acceleration responses and their instantaneous amplitudes. The DD in this paper has two steps: firstly, determining the vicinity of damage in global DD. Secondly, determining the location of damage in local DD. Then by acceleration signals, the instantaneous amplitude values of healthy and damaged structural responses are extracted via HHT. Further, for the accurate evaluation of the proposed method, damage locations are determined by the cross-correlation damage index (DICC). To assess the feasibility and reliability of proposed methods, several analytical models of concrete bridges of one to three spans, as well as as experimental model of a simply supported steel beam, have been used. In order to consider noise pollution during data acquisition, a certain amount of noise is added to the response. The results in the analytical and experimental models showed that the proposed methods can determine the damage locations with appropriate accuracy for different damage scenarios and it could provide more exact results with a rapid estimation.  </OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">damage detection</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Structural health monitoring</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Instantaneous amplitude</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Cross-correlation</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3812_40dba662fae60cd3bcceaa76a82d2873.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Evaluating the Economic and Environmental Impacts of Smart Management Systems for Cooling and Heating Systems in Building: Case study of Office Building in Tehran</ArticleTitle>
<VernacularTitle>Evaluating the Economic and Environmental Impacts of Smart Management Systems for Cooling and Heating Systems in Building: Case study of Office Building in Tehran</VernacularTitle>
			<FirstPage>607</FirstPage>
			<LastPage>626</LastPage>
			<ELocationID EIdType="pii">4007</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.16361.6200</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Gholamreza</FirstName>
					<LastName>Heravi</LastName>
<Affiliation>University of Tehran</Affiliation>
<Identifier Source="ORCID">0000-0002-2727-4920</Identifier>

</Author>
<Author>
					<FirstName>Milad</FirstName>
					<LastName>Rostami</LastName>
<Affiliation>School of Civil Engineering, College of Engineering, University of Tehran</Affiliation>

</Author>
<Author>
					<FirstName>Maryam</FirstName>
					<LastName>Shekari</LastName>
<Affiliation>Monitoring Manager, Pishrun energy Company, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>05</Month>
					<Day>18</Day>
				</PubDate>
			</History>
		    <Abstract>Considering the increasing rate of energy consumption and its environmental detrimental effects, as well as considering the use of non-renewable energy sources such as fossil fuels, energy management issues have become more important. Given the 40% share of the building industry&#039;s total energy consumption, as well as the 80% share of energy consumed during the operation period, attention to the areas of energy management and optimization during the operation period of the buildings can have a major impact on buildings’ energy performance. In this research, through identifying building energy management tools and studying previous studies, and assessing the effects of building energy management systems, the economic and environmental impacts of using building energy management systems on the annual energy consumption in an office building in Tehran as a case study has been investigated. The results indicate a 32 percent reduction in energy consumption and a significant reduction in the release of the environmental pollutants in smart mode compared to the base mode. Moreover, considering the social costs associated with the emitted pollutants as well as the return period, it has been attempted to identify the factors contributing to the economic justification of using smart heating and cooling systems. According to the results, the use of smart energy management systems can be considered an effective step in optimizing and managing energy consumption in the construction sector.</Abstract>
			<OtherAbstract Language="FA">Considering the increasing rate of energy consumption and its environmental detrimental effects, as well as considering the use of non-renewable energy sources such as fossil fuels, energy management issues have become more important. Given the 40% share of the building industry&#039;s total energy consumption, as well as the 80% share of energy consumed during the operation period, attention to the areas of energy management and optimization during the operation period of the buildings can have a major impact on buildings’ energy performance. In this research, through identifying building energy management tools and studying previous studies, and assessing the effects of building energy management systems, the economic and environmental impacts of using building energy management systems on the annual energy consumption in an office building in Tehran as a case study has been investigated. The results indicate a 32 percent reduction in energy consumption and a significant reduction in the release of the environmental pollutants in smart mode compared to the base mode. Moreover, considering the social costs associated with the emitted pollutants as well as the return period, it has been attempted to identify the factors contributing to the economic justification of using smart heating and cooling systems. According to the results, the use of smart energy management systems can be considered an effective step in optimizing and managing energy consumption in the construction sector.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Building management system</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Smart building</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Energy consumption management</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Demand response management</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Energy consumption optimization</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_4007_ab8df9f7733db5611fd53748f1db282e.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Effect of arch height on wind load in shape dome structure</ArticleTitle>
<VernacularTitle>Effect of arch height on wind load in shape dome structure</VernacularTitle>
			<FirstPage>627</FirstPage>
			<LastPage>638</LastPage>
			<ELocationID EIdType="pii">3857</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.16424.6220</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Saeed</FirstName>
					<LastName>Khosrowjerdi</LastName>
<Affiliation>M.Sc. Student of Civil Engineering, Hakim Sabzevari University</Affiliation>

</Author>
<Author>
					<FirstName>Hamed</FirstName>
					<LastName>Sarkardeh</LastName>
<Affiliation>Assistant Professor, Department of Civil Engineering, Hakim Sabzevari University</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>05</Month>
					<Day>26</Day>
				</PubDate>
			</History>
		    <Abstract>In an optimal design of a dome building, the outer shell with a curved shape, plays an important role in the architectural approach, bearing capacity, and the structural strength in vertical and lateral loads. In this research, the effect of the arch in domes against the wind is studied, numerically. For this purpose, domes with fixed height–diameter proportion in Type C ground and with the speed and turbulence intensity matching ASCE7 regulations are numerically simulated and the amounts of pressure coefficients (Cp &lt; /sub&gt;) are represented on the central line corresponding to the wind direction and the rings around the dome with different heights including 0, 25h, 0.5h, 0.75h, and h. Results indicated the great effect of arch height on Cp &lt; /sub&gt; and the percent of under pressure surfaces.</Abstract>
			<OtherAbstract Language="FA">In an optimal design of a dome building, the outer shell with a curved shape, plays an important role in the architectural approach, bearing capacity, and the structural strength in vertical and lateral loads. In this research, the effect of the arch in domes against the wind is studied, numerically. For this purpose, domes with fixed height–diameter proportion in Type C ground and with the speed and turbulence intensity matching ASCE7 regulations are numerically simulated and the amounts of pressure coefficients (Cp &lt; /sub&gt;) are represented on the central line corresponding to the wind direction and the rings around the dome with different heights including 0, 25h, 0.5h, 0.75h, and h. Results indicated the great effect of arch height on Cp &lt; /sub&gt; and the percent of under pressure surfaces.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Dome</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">CFD</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Wind load</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Spatial structure</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Arch</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3857_f269cb7796c3319c9aa4d146b52139e6.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Performance Assessment of the Roll-N-Cage (RNC) Isolators impacts on Progressive Collapse Behavior in Cable-Stayed Bridges</ArticleTitle>
<VernacularTitle>Performance Assessment of the Roll-N-Cage (RNC) Isolators impacts on Progressive Collapse Behavior in Cable-Stayed Bridges</VernacularTitle>
			<FirstPage>639</FirstPage>
			<LastPage>658</LastPage>
			<ELocationID EIdType="pii">4052</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.16458.6236</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Esmaeilnia Omran</LastName>
<Affiliation>Civil Engineering Department, Kurdistan University, Kurdistan, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Abbas</FirstName>
					<LastName>Hoseini Karani</LastName>
<Affiliation>Civil Engineering Department, Kurdistan University, Kurdistan, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>05</Month>
					<Day>31</Day>
				</PubDate>
			</History>
		    <Abstract>Structural safety can be threatened by the failure of one member of the structure if it fails other members of the structure. This phenomenon, which has recently attracted the attention of designers and engineers, is known as progressive collapse. Progressive collapse, especially during a severe earthquake, could threaten the general stability of structures and lead to their collapse. This research has been aimed to investigate the performance of the isolated cable-stayed bridges with modern Rolled-N-Cage (RNC) isolators under near-fault seismic loads and after losing a cable. In this regard, Bill Emerson isolated Cable-Stayed Bridge is implemented under three near-fault seismic events and assessed the results of the cable loss. Then, the buffer mechanism of the RNC isolator and its effects against preventing the progressive collapse is evaluated on preventing progressive collapse of the bridge. The results indicate that the RNC isolator with an activated buffer mechanism appropriately decreases the permanent displacement under near-fault seismic loads. While, not using the RNC isolator and buffer mechanism, causes the damage propagation and progressive collapse of the bridge.</Abstract>
			<OtherAbstract Language="FA">Structural safety can be threatened by the failure of one member of the structure if it fails other members of the structure. This phenomenon, which has recently attracted the attention of designers and engineers, is known as progressive collapse. Progressive collapse, especially during a severe earthquake, could threaten the general stability of structures and lead to their collapse. This research has been aimed to investigate the performance of the isolated cable-stayed bridges with modern Rolled-N-Cage (RNC) isolators under near-fault seismic loads and after losing a cable. In this regard, Bill Emerson isolated Cable-Stayed Bridge is implemented under three near-fault seismic events and assessed the results of the cable loss. Then, the buffer mechanism of the RNC isolator and its effects against preventing the progressive collapse is evaluated on preventing progressive collapse of the bridge. The results indicate that the RNC isolator with an activated buffer mechanism appropriately decreases the permanent displacement under near-fault seismic loads. While, not using the RNC isolator and buffer mechanism, causes the damage propagation and progressive collapse of the bridge.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Cable-Stayed Bridge</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Roll-N-Cage (RNC) isolator</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">near-fault earthquake</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Progressive Collapse</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Cable loss</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_4052_90525e70b7842930586545c6f1c9310c.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Evaluation of a by-product and enviromental-friendly chemical additives for clay soils with different mixing and curing methods</ArticleTitle>
<VernacularTitle>Evaluation of a by-product and enviromental-friendly chemical additives for clay soils with different mixing and curing methods</VernacularTitle>
			<FirstPage>659</FirstPage>
			<LastPage>674</LastPage>
			<ELocationID EIdType="pii">3904</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.16461.6238</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Amirsaeed</FirstName>
					<LastName>Giahi</LastName>
<Affiliation>MS student, civil engineering group, qom university of technology, qom, iran</Affiliation>

</Author>
<Author>
					<FirstName>Morteza</FirstName>
					<LastName>Jiryaei Sharahi</LastName>
<Affiliation>Assistance prof., Civil Engineering Group, Qom University of technology</Affiliation>
<Identifier Source="ORCID">0000-0003-3775-6066</Identifier>

</Author>
<Author>
					<FirstName>Bayramali</FirstName>
					<LastName>Mohammadnezhad</LastName>
<Affiliation>Civil Engineering Group, Qom University of Technology</Affiliation>
<Identifier Source="ORCID">0000-0003-3074-007X</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</History>
		    <Abstract>Soil stabilization is one of the most important methods of improving the soil in geotechnical engineering.Traditional stabilizers such as cement and lime have long been used and investigated, however, the use of these materials has environmental problems. Calcium lignosulphonate is a natural polymer produced from waste from the paper and timber industry.In this study, the effect of adding different percentages of ligno on Atterberg limits, compressive properties, and uniaxial clay strength is investigated, the effect of ligno addition by different mixing methods on soil strength and soil morphology is also investigated.The results of experiments showed that adding ligno generally improves soil mechanical properties, decreases soil plasticity index (PI), and increases soil strength and ductility.For the soil used in this study, the optimum percentage of calcium lignosulfonate additive was determined 1% soil by dry weight, which was able to increase the soil resistance from 322 to 828 kPa (2.5 times increase) after 28 days.</Abstract>
			<OtherAbstract Language="FA">Soil stabilization is one of the most important methods of improving the soil in geotechnical engineering.Traditional stabilizers such as cement and lime have long been used and investigated, however, the use of these materials has environmental problems. Calcium lignosulphonate is a natural polymer produced from waste from the paper and timber industry.In this study, the effect of adding different percentages of ligno on Atterberg limits, compressive properties, and uniaxial clay strength is investigated, the effect of ligno addition by different mixing methods on soil strength and soil morphology is also investigated.The results of experiments showed that adding ligno generally improves soil mechanical properties, decreases soil plasticity index (PI), and increases soil strength and ductility.For the soil used in this study, the optimum percentage of calcium lignosulfonate additive was determined 1% soil by dry weight, which was able to increase the soil resistance from 322 to 828 kPa (2.5 times increase) after 28 days.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Soil Stabilization</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">calcium lignosulfonate</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Clay</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">eco-friend</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">mixing method</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3904_c09f9caf5e08836d4673ccdd69bb041e.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>A Macro/Micro Structural Study of the Seawater Effect on the Process of Stabilizing Clay Soils with Lime and Nano-SiO2</ArticleTitle>
<VernacularTitle>A Macro/Micro Structural Study of the Seawater Effect on the Process of Stabilizing Clay Soils with Lime and Nano-SiO2</VernacularTitle>
			<FirstPage>675</FirstPage>
			<LastPage>686</LastPage>
			<ELocationID EIdType="pii">3889</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.16500.6256</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>ADEL</FirstName>
					<LastName>ASAKEREH</LastName>
<Affiliation>Department of Civil Engineering, Faculty of Engineering, University of Hormozgan, Bandar Abbas, Iran.</Affiliation>
<Identifier Source="ORCID">0000-0003-4706-2957</Identifier>

</Author>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Amiri</LastName>
<Affiliation>Assistant Prof., Faculty of Engineering., Hormozgan University</Affiliation>

</Author>
<Author>
					<FirstName>Reyhaneh Alsadat</FirstName>
					<LastName>Bahreini</LastName>
<Affiliation>M.Sc. of Geotechnical Engineering, Faculty of Engineering., University of Hormozgan, Bandar Abbas, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>07</Day>
				</PubDate>
			</History>
		    <Abstract>There is a large number of restrictions in the application of soil consolidation processes in many coastal areas due to the lack of fresh water. Besides, further studies are required on the effects of using saline water on soil improvement due to the widespread of saline water at the land surface. Therefore, in this paper, several macro/microstructural experiments were carried out to study the effect of ions in the seawater on the chemical stabilization process of clay soils with lime and nano-silica to stabilize kaolinite clay from varying amounts of lime, nano-silica, distilled water, and Persian Gulf water. A kaolinite clayey sample was cured with different amounts of lime and nano-silica. Accordingly, grain tests, Atterberg limits, pH changes, and changes in the uniaxial compressive strength over time were taken into account to evaluate the microstructures of X-ray diffraction analysis and to scan the electron microscopy images. Uniaxial compressive strength results indicated improvement in the samples without additives made with the seawater compared to the samples made with the distilled water. Additionally, the resistance of the samples mixed with the seawater increased by 4% compared to the samples mixed with the distilled water with 28-day curing, while the samples were modified with 6% lime.</Abstract>
			<OtherAbstract Language="FA">There is a large number of restrictions in the application of soil consolidation processes in many coastal areas due to the lack of fresh water. Besides, further studies are required on the effects of using saline water on soil improvement due to the widespread of saline water at the land surface. Therefore, in this paper, several macro/microstructural experiments were carried out to study the effect of ions in the seawater on the chemical stabilization process of clay soils with lime and nano-silica to stabilize kaolinite clay from varying amounts of lime, nano-silica, distilled water, and Persian Gulf water. A kaolinite clayey sample was cured with different amounts of lime and nano-silica. Accordingly, grain tests, Atterberg limits, pH changes, and changes in the uniaxial compressive strength over time were taken into account to evaluate the microstructures of X-ray diffraction analysis and to scan the electron microscopy images. Uniaxial compressive strength results indicated improvement in the samples without additives made with the seawater compared to the samples made with the distilled water. Additionally, the resistance of the samples mixed with the seawater increased by 4% compared to the samples mixed with the distilled water with 28-day curing, while the samples were modified with 6% lime.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Soil Stabilization</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Pore Water</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Kaolinite</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Lime</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Nano-silica</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3889_86098ef82c97fa789a47a8d2e8800794.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Numerical study of arch corner brace segments in simple steel frames to provide seismic resisting system</ArticleTitle>
<VernacularTitle>Numerical study of arch corner brace segments in simple steel frames to provide seismic resisting system</VernacularTitle>
			<FirstPage>687</FirstPage>
			<LastPage>706</LastPage>
			<ELocationID EIdType="pii">4276</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2021.16557.6267</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Nima</FirstName>
					<LastName>Abbasmaram</LastName>
<Affiliation>Graduate student, School of Civil Engineering, The University of Tehran, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>S. Mehdi</FirstName>
					<LastName>Zahrai</LastName>
<Affiliation>School of Civil Engineering, the University of Tehran</Affiliation>
<Identifier Source="ORCID">0000-0003-2759-2424</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>15</Day>
				</PubDate>
			</History>
		    <Abstract>Braced and rigid frames are the most typical systems that are used to resist lateral loads. Typical braced frames, in comparison with rigid frames, have higher stiffness they have low ductility. On the other hand, rigid frames have high ductility but due to their low lateral stiffness, they maintain large displacements throughout the earthquake, which is not favorable. Furthermore, in rigid frames, the beam to column connection is a critical area that often experiences damage during the earthquake. In this research, the objective is to create a lateral load-carrying system and improve the seismic performance of steel frames using the placement of arch segments cut of steel plates at the corner of simple steel frames and they are yielding. Due to the eccentricity, these components are subjected to an interaction of axial and flexural forces and like yielding dampers absorb the major part of the input energy. In this study, first, the hysteresis curve of arch segments made by ST37 steel was achieved using finite element software, ABAQUS.  Then this damper was modeled in SAP software to create the same hysteresis curve. Then, 3, 6, and 9-story bare rigid frames and simple frames with arch segments were modeled and subjected to time-history analysis of 12 different earthquakes. Based on achieved results, maximum roof displacement and maximum story drifts of frames, in simple frames with arch segments compared to bare rigid frames in average reduced 22 and 8%, respectively. Also in simple frames with arch segments on average 46% of input energy was absorbed by arch segments that indicate the relatively good performance of this system.</Abstract>
			<OtherAbstract Language="FA">Braced and rigid frames are the most typical systems that are used to resist lateral loads. Typical braced frames, in comparison with rigid frames, have higher stiffness they have low ductility. On the other hand, rigid frames have high ductility but due to their low lateral stiffness, they maintain large displacements throughout the earthquake, which is not favorable. Furthermore, in rigid frames, the beam to column connection is a critical area that often experiences damage during the earthquake. In this research, the objective is to create a lateral load-carrying system and improve the seismic performance of steel frames using the placement of arch segments cut of steel plates at the corner of simple steel frames and they are yielding. Due to the eccentricity, these components are subjected to an interaction of axial and flexural forces and like yielding dampers absorb the major part of the input energy. In this study, first, the hysteresis curve of arch segments made by ST37 steel was achieved using finite element software, ABAQUS.  Then this damper was modeled in SAP software to create the same hysteresis curve. Then, 3, 6, and 9-story bare rigid frames and simple frames with arch segments were modeled and subjected to time-history analysis of 12 different earthquakes. Based on achieved results, maximum roof displacement and maximum story drifts of frames, in simple frames with arch segments compared to bare rigid frames in average reduced 22 and 8%, respectively. Also in simple frames with arch segments on average 46% of input energy was absorbed by arch segments that indicate the relatively good performance of this system.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Lateral load-carrying system</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">arch segments</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">rigid frame</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">time-history analysis</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">energy dissipation</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_4276_9fe4e15b3924b1a78221734d0c063ae7.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Evaluation of Shadow Stress between Hydraulic Fractures</ArticleTitle>
<VernacularTitle>Evaluation of Shadow Stress between Hydraulic Fractures</VernacularTitle>
			<FirstPage>707</FirstPage>
			<LastPage>722</LastPage>
			<ELocationID EIdType="pii">4063</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.16566.6277</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Ali</FirstName>
					<LastName>Asgari</LastName>
<Affiliation>Assistant Professor of Geotechnical Engineering, Faculty of Engineering and Technology, University of Mazandaran, Babolsar, Iran.</Affiliation>
<Identifier Source="ORCID">0000-0002-2359-8696</Identifier>

</Author>
<Author>
					<FirstName>Aliakbar</FirstName>
					<LastName>Golshani</LastName>
<Affiliation>Department of Civil and Environmental Engineering, Tarbiat Modares University, Tehran, Iran.</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		    <Abstract>In order to increase the productivity of extraction of hydrocarbons reservoirs, the well is usually drilled in the direction of the minimum horizontal in situ stress, and hydraulic fractures simultaneously initiate and propagate perpendicular/transverse to the wellbore. In the last decade, more than 10,000 horizontal wells per year have been bored and hydraulically fractured, with up to a hundred hydraulic fractures placed in the horizontal segment of the well. In order to reduce operational cost, it is usual to create several hydraulic fractures at once. The well is there for stimulated in stages, with one stage consisting of a single pumping operation aimed at initiating and propagating simultaneously typically between 3-8 cracks spaced about 10–30 m apart. When the fluid pressure is applied on the surface of the fracture, the crack can propagate in the medium, but the pressure, induced from the fluid injection, may have a negative influence on the extension of adjacent cracks which is stated as shadow or interaction stress.  Certainly, an accurate estimation of interaction/shadow stress between the cracks leads to a more optimal design. In this research, the effect of the interaction between the hydraulic cracks with respect to the spacing and the number of cracks on each other and considering the position of the fractures are evaluated using the pseudo traction method. The results are shown that inner-fractures are further affected by shadow stress compared to outer-fractures. On the other hand as the distance of hydraulic fractures increases, shadow stresses decrease. In the last, the results can be useful in determining the optimum number and spacing of cracks in the design of hydraulic fractures.</Abstract>
			<OtherAbstract Language="FA">In order to increase the productivity of extraction of hydrocarbons reservoirs, the well is usually drilled in the direction of the minimum horizontal in situ stress, and hydraulic fractures simultaneously initiate and propagate perpendicular/transverse to the wellbore. In the last decade, more than 10,000 horizontal wells per year have been bored and hydraulically fractured, with up to a hundred hydraulic fractures placed in the horizontal segment of the well. In order to reduce operational cost, it is usual to create several hydraulic fractures at once. The well is there for stimulated in stages, with one stage consisting of a single pumping operation aimed at initiating and propagating simultaneously typically between 3-8 cracks spaced about 10–30 m apart. When the fluid pressure is applied on the surface of the fracture, the crack can propagate in the medium, but the pressure, induced from the fluid injection, may have a negative influence on the extension of adjacent cracks which is stated as shadow or interaction stress.  Certainly, an accurate estimation of interaction/shadow stress between the cracks leads to a more optimal design. In this research, the effect of the interaction between the hydraulic cracks with respect to the spacing and the number of cracks on each other and considering the position of the fractures are evaluated using the pseudo traction method. The results are shown that inner-fractures are further affected by shadow stress compared to outer-fractures. On the other hand as the distance of hydraulic fractures increases, shadow stresses decrease. In the last, the results can be useful in determining the optimum number and spacing of cracks in the design of hydraulic fractures.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Multiple hydraulic fractures</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Shadow stress</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Simultaneous propagation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Pseudo traction technique</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Analytical method</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_4063_7d97667a3e056acab9aaf653807b4a03.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Removal efficiency of penicillin G in horizontal subsurface flow wetlands</ArticleTitle>
<VernacularTitle>Removal efficiency of penicillin G in horizontal subsurface flow wetlands</VernacularTitle>
			<FirstPage>723</FirstPage>
			<LastPage>732</LastPage>
			<ELocationID EIdType="pii">3684</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.16625.6284</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Mohamad Javad</FirstName>
					<LastName>Zoqi</LastName>
<Affiliation>Department of Civil Engineering, Faculty of Engineering, University of Birjand, Birjand, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-6999-4221</Identifier>

</Author>
<Author>
					<FirstName>Mohamad Reza</FirstName>
					<LastName>Doosti</LastName>
<Affiliation>Department of Civil Engineering, Faculty of Engineering, University of Birjand, Birjand, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Vahid</FirstName>
					<LastName>Golkari</LastName>
<Affiliation>Department of Civil ENG, University of Birjand, Birjand, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>23</Day>
				</PubDate>
			</History>
		    <Abstract>Antibiotics are potential pollutants that represent an important environmental problem because of their toxic effects on the food chain and aqueous streams. The goal of this study was to determine the efficiency of a horizontal subsurface flow constructed wetland for a pharmaceutical pollutants antibiotic penicillin G. This study used constructed wetland pilot system for removal of penicillin G in artificial wastewater. in this study, the effects of initial concentration of wastewater, hydraulic retention time, and reed on the pollutant removal efficiency were investigated. The data was analyzed using the central composite design which is the most commonly used response surface methodology design. 30 Samples of wastewater were taken from the output of constructed wetlands subsurface and tested in the laboratory-based on the standard reference method for experiments in water and wastewater. The results showed that reed, and retention time, have a direct relationship, and enhance them to increase efficiency. The initial concentration of wastewater is inversely related to removal efficiency. In the constructed wetland, the removal efficiency for 72 hours and different input concentrations was between 94.17% and 73.61%. Based on the study results, it can be stated that subsurface constructed wetland can remove the maximum concentration of hospital wastewater and even double this concentration with efficiency up to 90 percent, and it can be used as a proper treatment system for removal of penicillin G.</Abstract>
			<OtherAbstract Language="FA">Antibiotics are potential pollutants that represent an important environmental problem because of their toxic effects on the food chain and aqueous streams. The goal of this study was to determine the efficiency of a horizontal subsurface flow constructed wetland for a pharmaceutical pollutants antibiotic penicillin G. This study used constructed wetland pilot system for removal of penicillin G in artificial wastewater. in this study, the effects of initial concentration of wastewater, hydraulic retention time, and reed on the pollutant removal efficiency were investigated. The data was analyzed using the central composite design which is the most commonly used response surface methodology design. 30 Samples of wastewater were taken from the output of constructed wetlands subsurface and tested in the laboratory-based on the standard reference method for experiments in water and wastewater. The results showed that reed, and retention time, have a direct relationship, and enhance them to increase efficiency. The initial concentration of wastewater is inversely related to removal efficiency. In the constructed wetland, the removal efficiency for 72 hours and different input concentrations was between 94.17% and 73.61%. Based on the study results, it can be stated that subsurface constructed wetland can remove the maximum concentration of hospital wastewater and even double this concentration with efficiency up to 90 percent, and it can be used as a proper treatment system for removal of penicillin G.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Constructed wetland</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Penicillin G</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Response surface methodology</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Phragmites australis</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Hospital Wastewater</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3684_c90e274d55309db944076afb3ff9c391.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Laboratory Investigation of the Effect of “NICOFLOK” Polymer on the Compressive and Tensile Strength of Desert and Coastal Sand at the pavement Layers</ArticleTitle>
<VernacularTitle>Laboratory Investigation of the Effect of “NICOFLOK” Polymer on the Compressive and Tensile Strength of Desert and Coastal Sand at the pavement Layers</VernacularTitle>
			<FirstPage>733</FirstPage>
			<LastPage>748</LastPage>
			<ELocationID EIdType="pii">3788</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2020.16612.6288</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Farzad</FirstName>
					<LastName>Rezaie Moghaddam</LastName>
<Affiliation>Department of Civil Engineering, Faculty of Engineering, ardebil, iran</Affiliation>

</Author>
<Author>
					<FirstName>Bahman</FirstName>
					<LastName>Jafari Nader</LastName>
<Affiliation>Civil Engineering - ardebil - iran</Affiliation>

</Author>
<Author>
					<FirstName>Taghi</FirstName>
					<LastName>Rezaie Moghaddam</LastName>
<Affiliation>ardabil, iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>25</Day>
				</PubDate>
			</History>
		    <Abstract>Dune sand can be easily found on beaches and deserts. In this study samples from beaches of the Caspian Sea in Astara and Mazandaran and also from deserts around Kerman were recognized and collected. The effect of adding Nikoflok polymer with cement to samples after stabilization was investigated. This study aims to improve the compressive and tensile strength of samples made of dune sand from beaches and deserts to assess the possibility of using them with cement in the subgrade, sub-base and base. 200 samples with 3, 6, and 12 percent of cement, 0.3, 0.6, and 1.2 percent of Nikoflok and dune sand were made and underwent 7, and 28 day compressive and indirect tensile tests. Also, the strength degradation of samples under 45 cycles of freeze-thaw was investigated. The results showed that by stabilizing dune sand with cement and Nikoflok, its compressive and tensile strength increases and it can be used in pavement layers.  </Abstract>
			<OtherAbstract Language="FA">Dune sand can be easily found on beaches and deserts. In this study samples from beaches of the Caspian Sea in Astara and Mazandaran and also from deserts around Kerman were recognized and collected. The effect of adding Nikoflok polymer with cement to samples after stabilization was investigated. This study aims to improve the compressive and tensile strength of samples made of dune sand from beaches and deserts to assess the possibility of using them with cement in the subgrade, sub-base and base. 200 samples with 3, 6, and 12 percent of cement, 0.3, 0.6, and 1.2 percent of Nikoflok and dune sand were made and underwent 7, and 28 day compressive and indirect tensile tests. Also, the strength degradation of samples under 45 cycles of freeze-thaw was investigated. The results showed that by stabilizing dune sand with cement and Nikoflok, its compressive and tensile strength increases and it can be used in pavement layers.  </OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Dune sand</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Nikoflok</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Cement</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Compressive and Tensile Strength</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Stabilization</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3788_deb74a85a4a68465b75c721d45db5d3b.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Optimal design of groynes with hydraulic, technical and economic criteria</ArticleTitle>
<VernacularTitle>Optimal design of groynes with hydraulic, technical and economic criteria</VernacularTitle>
			<FirstPage>749</FirstPage>
			<LastPage>766</LastPage>
			<ELocationID EIdType="pii">3700</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.16646.6289</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Nasrin</FirstName>
					<LastName>Abouzari</LastName>
<Affiliation>Faculty of Civil Engineering, Water and Environment, Shahid Beheshti, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mohammad Reza</FirstName>
					<LastName>Majdzadeh Tabatabai</LastName>
<Affiliation>Civil Engineering</Affiliation>

</Author>
<Author>
					<FirstName>Jafar</FirstName>
					<LastName>Yazdi</LastName>
<Affiliation>Faculty of Civil, Water , Shahid Beheshti Universityand Environmental Engineering</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>25</Day>
				</PubDate>
			</History>
		    <Abstract>Groynes are one of the most important protective structures for river regulation and are constructed to prevent erosion in the river. A multi-objective optimization model has been used to provide a technically and economically optimal design. In the present study, the hydraulic design as well as the design of the groyne structures were formulated in the form of an optimization problem using the NSGA-II algorithm. The objective functions of the optimization model include simultaneously minimizing costs and maximizing sediment load transport. The first objective function is to economize the design and the second objective function is based on the definitions of river stability in order to keep the riverstable.  Model calibration was performed using Zanjanrood River information of bed load and scour equation. The model was investigated for sensitivity to change inlet flow parameters and longitudinal slope and its effect on output parameters and model validation with case study structural information. The optimization problem pareto front was derived based on cost and bed load functions. By comparing the five optimal  possible designs (5 different design scenarios) from the pareto front with the existing design and the ideal design, the results show that the design selected among five scenarios has the closest approximation to Utopia point. The selected design suggests that the length of the groynes and the distance between them are reduced compared to the existing design and the slope of the side of the groynes is also lower than the groyne&#039;s root. The selected design has 64.95%  less cost and  39.96% more sediment transport than those of the current condition.</Abstract>
			<OtherAbstract Language="FA">Groynes are one of the most important protective structures for river regulation and are constructed to prevent erosion in the river. A multi-objective optimization model has been used to provide a technically and economically optimal design. In the present study, the hydraulic design as well as the design of the groyne structures were formulated in the form of an optimization problem using the NSGA-II algorithm. The objective functions of the optimization model include simultaneously minimizing costs and maximizing sediment load transport. The first objective function is to economize the design and the second objective function is based on the definitions of river stability in order to keep the riverstable.  Model calibration was performed using Zanjanrood River information of bed load and scour equation. The model was investigated for sensitivity to change inlet flow parameters and longitudinal slope and its effect on output parameters and model validation with case study structural information. The optimization problem pareto front was derived based on cost and bed load functions. By comparing the five optimal  possible designs (5 different design scenarios) from the pareto front with the existing design and the ideal design, the results show that the design selected among five scenarios has the closest approximation to Utopia point. The selected design suggests that the length of the groynes and the distance between them are reduced compared to the existing design and the slope of the side of the groynes is also lower than the groyne&#039;s root. The selected design has 64.95%  less cost and  39.96% more sediment transport than those of the current condition.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Groyne</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">River training</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">optimization</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">NSGA-II</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Cost</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3700_f92586a25bb3145facd64ab20fd554ff.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>53</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Evaluation of the Effect of Macro-Synthetic Fibers on Thickness and Cost Index of Jointed Concrete Pavements Considering the Impact of Post-Cracking Flexural Strength</ArticleTitle>
<VernacularTitle>Evaluation of the Effect of Macro-Synthetic Fibers on Thickness and Cost Index of Jointed Concrete Pavements Considering the Impact of Post-Cracking Flexural Strength</VernacularTitle>
			<FirstPage>767</FirstPage>
			<LastPage>784</LastPage>
			<ELocationID EIdType="pii">4241</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2021.19050.7048</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Abolfazl</FirstName>
					<LastName>Hassani</LastName>
<Affiliation>Department of Roads and Transportation, Faculty of Civil and Environmental Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Seyed Javad</FirstName>
					<LastName>Vaziri Kang Oleyaei</LastName>
<Affiliation>Highway Engineering and Transportation, school of civil engineering, Iran University Of science and Technology, Tehran,Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mohammad Reza</FirstName>
					<LastName>Hajizadeh</LastName>
<Affiliation>Department of Civil and Environmental Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>09</Month>
					<Day>24</Day>
				</PubDate>
			</History>
		    <Abstract>Considering the effect of post-cracking strength and the cost of pavement construction in designing the thickness of jointed concrete pavements lead to more effective and economical pavement design. Therefore, this study evaluates the effect of the addition of macro-synthetic fibers on the thickness and construction cost of jointed concrete pavements, considering the impact of post-cracking flexural strength. The effect of polypropylene macro fibers in the amounts of 0, 1, 2, and 3 kg/m3 on changes of thickness and construction cost index of jointed concrete pavements was studied considering the modulus of rupture and equivalent flexural strength ratio of each mix design in pavement thickness design. It was observed that the addition of macro fibers reduced the thickness of jointed concrete pavement up to 25%. The highest pavement thickness reduction occurred in fiber consumption from 0 to 1 kg/m3. With the addition of more fibers, no more significant decrease in thickness occurred. The addition of fibers increased the cost index of pavement construction up to 57%. Using macro-synthetic fibers up to 1 kg/m3 caused the lowest pavement cost index&#039;s growth rate compared to other consumption contents. It was concluded that the optimal amount of macro-synthetic fibers could be determined for economic reduction of the pavement thickness by considering the growth rate of the pavement cost index, which in this study was obtained at the content of 1 kg/m3.</Abstract>
			<OtherAbstract Language="FA">Considering the effect of post-cracking strength and the cost of pavement construction in designing the thickness of jointed concrete pavements lead to more effective and economical pavement design. Therefore, this study evaluates the effect of the addition of macro-synthetic fibers on the thickness and construction cost of jointed concrete pavements, considering the impact of post-cracking flexural strength. The effect of polypropylene macro fibers in the amounts of 0, 1, 2, and 3 kg/m3 on changes of thickness and construction cost index of jointed concrete pavements was studied considering the modulus of rupture and equivalent flexural strength ratio of each mix design in pavement thickness design. It was observed that the addition of macro fibers reduced the thickness of jointed concrete pavement up to 25%. The highest pavement thickness reduction occurred in fiber consumption from 0 to 1 kg/m3. With the addition of more fibers, no more significant decrease in thickness occurred. The addition of fibers increased the cost index of pavement construction up to 57%. Using macro-synthetic fibers up to 1 kg/m3 caused the lowest pavement cost index&#039;s growth rate compared to other consumption contents. It was concluded that the optimal amount of macro-synthetic fibers could be determined for economic reduction of the pavement thickness by considering the growth rate of the pavement cost index, which in this study was obtained at the content of 1 kg/m3.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Jointed concrete pavements</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Macro-synthetic fibers</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Pavement thickness</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Construction cost index</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Post-cracking flexural strength</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_4241_28f7241796510e838db4a1384ae1279d.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
