<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Amirkabir University of Technology</PublisherName>
				<JournalTitle>Amirkabir Journal of Civil Engineering</JournalTitle>
				<Issn>2588-297X</Issn>
				<Volume>52</Volume>
				<Issue>8</Issue>
				<PubDate PubStatus="epublish">
					<Year>2020</Year>
					<Month>10</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>The Effect of Semi-active Control on Nonlinear Response of Structures through Incremental Dynamic Analysis</ArticleTitle>
<VernacularTitle>The Effect of Semi-active Control on Nonlinear Response of Structures through Incremental Dynamic Analysis</VernacularTitle>
			<FirstPage>1935</FirstPage>
			<LastPage>1952</LastPage>
			<ELocationID EIdType="pii">3410</ELocationID>
			
<ELocationID EIdType="doi">10.22060/ceej.2019.15710.6017</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Hassan</FirstName>
					<LastName>Bahar</LastName>
<Affiliation>Civil Engineering Group, Faculty of Engineering, University of Guilan, Rasht, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-6525-7873</Identifier>

</Author>
<Author>
					<FirstName>Arash</FirstName>
					<LastName>Bahar</LastName>
<Affiliation>Civil Engineering Group, Faculty of Engineering, University of Guilan, Rasht, Iran</Affiliation>
<Identifier Source="ORCID">0000-0003-4341-1566</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>02</Month>
					<Day>01</Day>
				</PubDate>
			</History>
		<Abstract>It this paper, incremental dynamic analysis (IDA) of the controlled structures is presented. Nonlinear dynamic analyses for controlled structures are performed through Force Analogy Method (FAM) and State-space. IDA curves are demonstrated for un-controlled structures, under optimal control and under semi-active control. Therefore, the influence of control system for structures and changes in its behavior could be observed. Introductions for IDA, structural control, Semi-active Hydraulic Damper (SHD) and Force Analogy Method (FAM) are explained in the article. Full Static Condensation Model (FSCM) is introduced as a recent method that could consider non-linear behavior (through FAM and State-Space), static condensation and full Rayleigh damping matrix. In this article, FSCM is extended for the structures which are protected by optimal or semi-active control system. Therefore nonlinear behavior of controlled structures was considered. Numerical examples for a 5-story frame under scaled earthquakes were presented. The structure, for both controlled and un-controlled conditions, was modeled by the way that it could consider non-linear behavior. Control algorithms that have been used in the program were optimal control and SHD semi-active control. MATLAB codes were developed and IDA curves for no-control, optimal control and SHD control (with different arrangements of SHD control tools) are calculated and illustrated. At the end of the numerical section, some results and interpretations were extracted from IDA curves of controlled and un-controlled frames. They are explained in details and could give better understanding for dynamic behavior of the structures.</Abstract>
			<OtherAbstract Language="FA">It this paper, incremental dynamic analysis (IDA) of the controlled structures is presented. Nonlinear dynamic analyses for controlled structures are performed through Force Analogy Method (FAM) and State-space. IDA curves are demonstrated for un-controlled structures, under optimal control and under semi-active control. Therefore, the influence of control system for structures and changes in its behavior could be observed. Introductions for IDA, structural control, Semi-active Hydraulic Damper (SHD) and Force Analogy Method (FAM) are explained in the article. Full Static Condensation Model (FSCM) is introduced as a recent method that could consider non-linear behavior (through FAM and State-Space), static condensation and full Rayleigh damping matrix. In this article, FSCM is extended for the structures which are protected by optimal or semi-active control system. Therefore nonlinear behavior of controlled structures was considered. Numerical examples for a 5-story frame under scaled earthquakes were presented. The structure, for both controlled and un-controlled conditions, was modeled by the way that it could consider non-linear behavior. Control algorithms that have been used in the program were optimal control and SHD semi-active control. MATLAB codes were developed and IDA curves for no-control, optimal control and SHD control (with different arrangements of SHD control tools) are calculated and illustrated. At the end of the numerical section, some results and interpretations were extracted from IDA curves of controlled and un-controlled frames. They are explained in details and could give better understanding for dynamic behavior of the structures.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">incremental dynamic analysis (IDA)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Force Analogy Method (FAM)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Structural Control in Nonlinear Domains</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Full Static Condensation Model (FSCM)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Semi-active ControlControl</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ceej.aut.ac.ir/article_3410_c6f798b844366ccd65d99bc7f31e0e02.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
