TY - JOUR ID - 5079 TI - Numerical investigation of effective parameters on the behavior of concrete-filled steel tubular gusset plate connections JO - Amirkabir Journal of Civil Engineering JA - CEEJ LA - en SN - 2588-297X AU - Ebrahimnejad, Milad AU - Razi, Ali AU - Arezoomand Langarudi, Pouya AD - Department of Civil Engineering, Faculty of Technology and Engineering, University of Guilan AD - Civil Engineering Department, Faculty of Engineering, University of Science and Culture, Rasht, Iran AD - Department of Civil Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran Y1 - 2023 PY - 2023 VL - 55 IS - 3 SP - 701 EP - 722 KW - Concrete-filled steel tube (CFST) KW - Gusset Plate KW - finite element method KW - failure DO - 10.22060/ceej.2023.20837.7545 N2 - Concrete-filled steel tubular (CFST) gusset plate connection is a commonly used method in which the plates are welded directly to the columns. Due to the importance of stress distribution and energy absorption capacity on the behavior of the mentioned connections, in the present study, numerical analysis of the behavior of these connections under different loadings has been investigated. The studied variables include the thickness of the gusset plate, the compressive strength of the concrete, the D/t (diameter to thickness) ratio of CFST, and the type of loading. The results show that although filling hollow tubular sections with concrete prevents the local buckling of the steel wall, the use of concrete with higher compressive strength does not always lead to increased load capacity and energy absorption, so in many of the studied models, the energy absorption capacity decreases by 18% to 30%. On the other hand, the results showed that the diameter-to-thickness ratio has a significant effect on the energy absorption capacity of the simulated connections so by increasing this ratio, the energy absorption capacity has decreased in the range of 76% to 91%. Also, the loading condition is effective in the load-bearing capacity and the energy absorption of the structure. So that in the case of eccentric tension and in-plane bending, the energy absorption capacity is reduced by 53% and 86%, respectively, compared to axial tension loading. UR - https://ceej.aut.ac.ir/article_5079.html L1 - https://ceej.aut.ac.ir/article_5079_4d491f23796cc749aa9c468e563db651.pdf ER -