ORIGINAL_ARTICLE
بررسی اثر مقایسهای الیاف ماکرو و میکرو پلیپروپیلن بر کنترل یا کاهش ترکخوردگیهای ناشی از جمعشدگی خمیری در روسازیهای بتنی در شرایط دمایی بالا
ترکخوردگی ناشی از جمعشدگی خمیری در روسازی بتنی، محلی برای ورود آب و مواد خورنده به داخل روسازی بوده و باعث کاهش دوام و در نهایت شکست دال روسازی میگردد. استفاده از الیاف، یکی از راههای کنترل و کاهش این ترکها است. این پژوهش، به بررسی اثر افزودن الیاف پلیمری ماکرو در مقایسه با الیاف پلیمری میکرو بر ترکخوردگی ناشی از جمعشدگی خمیری بتن، میپردازد. بدین منظور از یک نوع الیاف میکرو پلیپروپیلن و دو نوع الیاف ماکرو پلیپروپیلن در درصد حجمی 1.0 %در ساخت نمونهها استفاده شد. آزمایشهای مکانیکی شامل مقاومت فشاری و خمشی و آزمایش ارزیابی ترکخوردگی ناشی از جمعشدگی خمیری بر اساس 1579 C ASTM در شرایط محیطی شامل رطوبت نسبی هوا 20 ،%سرعت جریان باد 30 کیلومتر بر ساعت و در دو دمای 35 و 40 درجه سانتیگراد انجام شد. نتایج نشان داد نمونههای بتن حاوی هر دو نوع الیاف ماکرو و میکرو در کنترل ترکخوردگیها عملکرد مناسب تری نسبت به نمونههای شاهد داشتند. در این میان، الیاف میکرو در کنترل عرض ترکخوردگی در هر دو دمای آزمایش شده، عملکرد بهتری داشتند. در مقابل، الیاف ماکرو در کاهش طول ترکخوردگی، به ویژه در دماهای بالاتر، اثر بهتری از خود نشان دادند. استفاده از الیاف ماکرو میتواند تا حد قابل توجهی منجر به کاهش ابعاد و مساحت ترکخوردگی ناشی از جمعشدگی خمیری در روسازیهای بتنی گردد.
https://ceej.aut.ac.ir/article_4153_d4597d13fb34c95e2f1e64dfdf68d8e6.pdf
2021-03-21
3
20
10.22060/ceej.2020.18767.6957
روسازی بتنی
ترکخوردگی ناشی از جمعشدگی خمیری
شرایط دمایی بالا
الیاف ماکرو پلیپروپیلن
الیاف میکرو پلیپروپیلن
سید جواد
وزیری کنگ علیائی
javad_vaziri@alumni.iust.ac.ir
1
گروه راه و ترابری، دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران، تهران، ایران
AUTHOR
حسن
فضایلی
fazaeli@iau-tnb.ac.ir
2
گروه مهندسی عمران، دانشگاه آزاد اسلامی واحد تهرات- شمال، تهران، ایران
LEAD_AUTHOR
[1] Design, Construction and Maintenance Manual for Highways Concrete Pavements No.731in, The Ministry of Road & Urban Development. Deputy of Technical, Infrastructure and Production Affairs 2017.
1
[2] N.J. Delatte, Concrete pavement design, construction, and performance, Crc Press, 2014.
2
[3] F. Faisal, B. Nitin, Effects of steel fibers and Silica fume on Compressive and flexural Strength of pavement Concrete, Lovely Professional University, 2017.
3
[4] P.-m. Zhan, Z.-h. He, Application of shrinkage reducing admixture in concrete: A review, Constr. Build. Mater., 201 (2019) 676-690.
4
[5] S. Ghourchian, M. Wyrzykowski, M. Plamondon, P. Lura, On the mechanism of plastic shrinkage cracking in fresh cementitious materials, Cem. Concr. Res., 115 (2019) 251-263.
5
[6] P. Ghoddousi, A.A.S. Javid, M.A. Etebari, Investigation of the effect of capillary pore pressure on paste shrinkage of concrete mixtures containing microsilica and metakaolin and its relationship with tensile strength of early ages., New Approaches in Civil Engineering, 3(2) (2019).
6
[7] R. Combrinck, M. Kayondo, B. le Roux, W. de Villiers, W. Boshoff, Effect of various liquid admixtures on cracking of plastic concrete, Constr. Build. Mater., 202 (2019) 139-153.
7
[8] R. Combrinck, W.P. Boshoff, Tensile properties of plastic concrete and the influence of temperature and cyclic loading, Cem. Concr. Compos., 97 (2019) 300-311.
8
[9] P. Zhao, A.M. Zsaki, M.R. Nokken, Using digital image correlation to evaluate plastic shrinkage cracking in cement-based materials, Constr. Build. Mater., 182 (2018) 108-117.
9
[10] A.A.S. Javid, Mechanisms and strategies to increase the durability of concrete against plastic settelement, plastic shrinkage and drying cracking, in: First National Conference on Concrete Durability, Tehran,iran, 2018.
10
[11] G. Moelich, R. Combrinck, A weather data analysis method to mitigate and prevent plastic shrinkage cracking, Constr. Build. Mater., 253 (2020) 119066.
11
[12] D. Meyer, W.P. Boshoff, R. Combrinck, Utilising super absorbent polymers as alternative method to test plastic shrinkage cracks in concrete, Constr. Build. Mater., 248 (2020) 118666.
12
[13] E. Booya, K. Gorospe, H. Ghaednia, S. Das, Free and restrained plastic shrinkage of cementitious materials made of engineered kraft pulp fibres, Constr. Build. Mater., 212 (2019) 236-246.
13
[14] S. Ghourchian, M. Wyrzykowski, L. Baquerizo, P. Lura, Susceptibility of Portland cement and blended cement concretes to plastic shrinkage cracking, Cem. Concr. Compos., 85 (2018) 44-55.
14
[15] A.Z. Bendimerad, E. Rozière, A. Loukili, Plastic shrinkage and cracking risk of recycled aggregates concrete, Constr. Build. Mater., 121 (2016) 733-745.
15
[16] M. Wyrzykowski, P. Trtik, B. Münch, J. Weiss, P. Vontobel, P. Lura, Plastic shrinkage of mortars with shrinkage reducing admixture and lightweight aggregates studied by neutron tomography, Cement and Concrete Research, 73 (2015) 238-245.
16
[17] H.-G. Kwak, S. Ha, W.J. Weiss, Experimental and numerical quantification of plastic settlement in fresh cementitious systems, Journal of materials in Civil Engineering, 22(10) (2010) 951-966.
17
[18] R. Combrinck, Cracking of Plastic Concrete in Slab-Like Elements, Stellenbosch: Stellenbosch University, 2016.
18
[19] I. Bertelsen, L. Ottosen, G. Fischer, Influence of fibre characteristics on plastic shrinkage cracking in cement-based materials: A review, Constr. Build. Mater., 230 (2020) 116769.
19
[20] ASTM D7508 / D7508M-20, Standard Specification for Polyolefin Chopped Strands for Use in Concrete, ASTM International, West Conshohocken, PA, 2020, in.
20
[21] M. Kayondo, R. Combrinck, W. Boshoff, State-of-the-art review on plastic cracking of concrete, Constr. Build. Mater., 225 (2019) 886-899.
21
[22] H. Rooholamini, A. Hassani, M. Aliha, Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology, Construction and Building Materials, 159 (2018) 517-529.
22
[23] A. Shafiepour, S. Shabani, F. Faezi, Effects of Dimensions and Amount of Polymer Fibers on the Strength and Durability of Roller-Compacted Concrete under Freeze-Thaw cycling, Amirkabir Journal of Civil Engineering, (2019).
23
[24] J. LaHucik, S. Dahal, J. Roesler, A.N. Amirkhanian, Mechanical properties of roller-compacted concrete with macro-fibers, Construction and Building Materials, 135 (2017) 440-446.
24
[25] S.A. Altoubat, J.R. Roesler, D.A. Lange, K.-A. Rieder, Simplified method for concrete pavement design with discrete structural fibers, Construction and Building Materials, 22(3) (2008) 384-393.
25
[26] G.S. Islam, S.D. Gupta, Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete, Int. J. Sustainable Built Environ., 5(2) (2016) 345-354.
26
[27] P. Soroushian, F. Mirza, A. Alhozajiny, Plastic shrinkage cracking of polypropylene fiber reinforced concrete, Materials Journal, 92(5) (1993) 553-560.
27
[28] Z. Bayasi, M. McIntyre, Application of fibrillated polypropylene fibers for restraint of plastic shrinkage cracking in silica fume concrete, Materials Journal, 99(4) (2002) 337-344.
28
[29] R. Gupta, N. Banthia, Correlating plastic shrinkage cracking potential of fiber reinforced cement composites with its early-age constitutive response in tension, Materials and structures, 49(4) (2016) 1499-1509.
29
[30] J.-H.J. Kim, C.-G. Park, S.-W. Lee, S.-W. Lee, J.-P. Won, Effects of the geometry of recycled PET fiber reinforcement on shrinkage cracking of cement-based composites, Composites Part B: Engineering, 39(3) (2008) 442-450.
30
[31] R.P. Borg, O. Baldacchino, L. Ferrara, Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete, Construction and Building Materials, 108 (2016) 29-47.
31
[32] S.-J. Lee, J.-P. Won, Shrinkage characteristics of structural nano-synthetic fibre-reinforced cementitious composites, Composite Structures, 157 (2016) 236-243.
32
[33] A. Mazzoli, S. Monosi, E.S. Plescia, Evaluation of the early-age-shrinkage of Fiber Reinforced Concrete (FRC) using image analysis methods, Construction and Building Materials, 101 (2015) 596-601.
33
[34] Chemical and Physical properties of Cement Type 1-425, in, Shargh Cement Co.https://www.sharghcement.ir/index.php?pgrec=produce_type1_425.
34
[35] G. Olivier, R. Combrinck, M. Kayondo, W.P. Boshoff, Combined effect of nano-silica, super absorbent polymers, and synthetic fibres on plastic shrinkage cracking in concrete, Construction and Building Materials, 192 (2018) 85-98.
35
[36] J. Branston, S. Das, S.Y. Kenno, C. Taylor, Influence of basalt fibres on free and restrained plastic shrinkage, Cement and Concrete Composites, 74 (2016) 182-190.
36
[37] Image Analysing Software, Digimizer, in, MedCalc Software's VAT registration number is BE 0809 344 640. https://www.digimizer.com/index.php.
37
[38] T. Merhej, L.L. Cheng, D.C. Feng, Polypropylene fiber reinforced concrete for rigid airfield pavement, in: Advanced Materials Research, Trans Tech Publ, 2011, pp. 627-633.
38
[39] S. Wtaife, A. Alsabbagh, T. Eissa, E. Alshammari, A. Shaban, N. Suksawang, Analysis of Flexural Capacity of Fiber Reinforced Concrete Pavements, International Journal of Technology and Engineering Studies, 4(6) (2018) 203-210.
39
[40] J.R. Roesler, S.A. Altoubat, D.A. Lange, K.-A. Rieder, G.R. Ulreich, Effect of synthetic fibers on structural behavior of concrete slabs-on-ground, ACI materials journal, 103(1) (2006) 3.
40
[41] L.G. Sorelli, A. Meda, G.A. Plizzari, Steel fiber concrete slabs on ground: a structural matter, ACI Structural Journal, 103(4) (2006) 551.
41
ORIGINAL_ARTICLE
میراگر فلزی پوستهای تودرتو با رویکرد بهبود در رفتار هیسترزیس
با بهرهگیری از ایدهی مهار سازهها با استفاده از ابزارهای میراکنندهی انرژی زلزله، میراگر نوینی به نام میراگر پوستهای تودرتوی ناهمراستا توسط نگارندگان این پژوهش پیشنهاد شده است. ساختمان این میراگر از یک پوستهی استوانهای بزرگ فلزی که سه پوستهی استوانهای کوچک را در برگرفته است، ساخته شده است. برای ساخت این میراگر از روشهای جوشکاری یا ریختهگری فلز میتوان بهره برد. چیدمان عضوهای پوستهای این میراگر در فرایند بارگذاری لرزهای میتوانند بهسان فنرهای فرابازگشتی با ترکیب سری و موازی سبب بالارفتن عملکرد دستگاه شوند. برای ارزیابی عملکرد دستگاه، مدلهایی از این میراگر به روش آنالیز عددی (اجزا محدود) آنالیز و دادههای بدست آمده با دو نمونهی آزمایشگاهی همسنجی شده است. نمودارهای چرخهای بدست آمده از آزمایش در همسنجی نتایج عددی به کارگرفته شده است تا دادههای مهم مکانیکی مانند میرایی، سختی مؤثر و نیروی تسلیم که برای استفاده از میراگرها در سازهها مورد نیاز است از آنالیز عددی معتبر بدست آید. دراین پژوهش برای ارتقا در عملکرد دستگاه و اندرکنش بیشتر عضوهای داخلی این میراگر، نسبتی برای ضخامت پوستهها پیشنهاد شده است و با تحلیلهای عددی، سودمندی درنظر گرفتن این نسبت در ضخامت عضوهای داخلی میراگر با ارزیابی داده های مکانیکی بدست آمده و مقایسه آنها با نمونههای ابتدایی به اثبات رسیده است. همچنین در نمودارهای چرخهای بارگذاری که از تحلیل های عددی بر روی این میراگر ارتقا یافته حاصل شده است، نتایج مناسبتری در میرایی انرژی و سایر ویژگیهای مکانیکی برای این میراگر به دست آمده است.
https://ceej.aut.ac.ir/article_4223_9c3945146e50d80574e45d0323e9fdbd.pdf
2021-03-21
21
34
10.22060/ceej.2020.18975.7013
کنترل کنشگیر
میراگر هیسترزیس
میرایی انرژی
روش اجزا محدود
آزمون بارگذاری
علیرضا
رئیسی
alireza_reisi@yahoo.com
1
دانش آموخته دکتری سازه، گروه مهندسی عمران، دانشگاه آزاد اسلامی، واحد اصفهان، اصفهان، ایران
LEAD_AUTHOR
حمیدرضا
میردامادی
hrmirdamadi@cc.iut.ac.ir
2
دانشیار دانشکده مهندسی مکانیک، دانشگاه صنعتی اصفهان، اصفهان، ایران
AUTHOR
محمد علی
رهگذر
rahgozar@eng.ui.ac.ir
3
دانشیار دانشکده مهندسی عمران و حمل ونقل، دانشگاه اصفهان، اصفهان، ایران
AUTHOR
[1] Calvi, G., M. Priestley, and M. Kowalsky, Displacement–based seismic design of structures. Earthquake spectra, 2007. 24(2): p. 1-24.
1
[2] Plevris, V., G. Kremmyda, and Y. Fahjan, Performance-Based Seismic Design of Concrete Structures and Infrastructures. 2017: IGI Global.
2
[3] Soong, T.T. and M.C. Costantinou, Passive and active structural vibration control in civil engineering. Vol. 345. 2014: Springer.
3
[4] Soong, T.T. and G.F. Dargush, * Passive Energy Dissipation Systems in Structural Engineering. 1997: Wiley.
4
[5] Soong, T. and B. Spencer Jr, Supplemental energy dissipation: state-of-the-art and state-of-the-practice. Engineering structures, 2002. 24(3): p. 243-259.
5
[6] Bergman, D.M. and S.C. Goel, Evaluation of cyclic testing of steel-plate devices for added damping and stiffness. 1987: Department of Civil Engineering, University of Michigan.
6
[7] Tsai, K.-C., et al., Design of steel triangular plate energy absorbers for seismic-resistant construction. Earthquake spectra, 1993. 9(3): p. 505-528.
7
[8] Suzuki, K. and A. Watanabe. Experimental Study of U-shaped Steel Damper [J]. in Summary of Technical Papers of Annual Meeting, Architectural Institute of Japan, B-2. 2000.
8
[9] Chan, R.W. and F. Albermani, Experimental study of steel slit damper for passive energy dissipation. Engineering Structures, 2008. 30(4): p. 1058-1066.
9
[10] Garivani, S., A. Aghakouchak, and S. Shahbeyk, Numerical and experimental study of comb-teeth metallic yielding dampers. International Journal of Steel Structures, 2016. 16(1): p. 177-196.
10
[11] Motamedi, M. and F. Nateghi-A, Study on mechanical characteristics of accordion metallic damper. Journal of Constructional Steel Research, 2018. 142: p. 68-77.
11
[12] Amiri, H.A., E.P. Najafabadi, and H.E. Estekanchi, Experimental and analytical study of block slit damper. Journal of Constructional Steel Research, 2018. 141: p. 167-178.
12
[13] Iwata, M., T. Kato, and A. Wada, Buckling-restrained braces as hysteretic dampers. Behavior of steel structures in seismic areas, 2000: p. 33-38.
13
[14] Jahangir, H., Daneshvar Khorram, M.H., Ghalehnovi, M., , Influence of Geometric Parameters on Perforated Core Buckling Restrained Braces Behavior (In Persian). Journal of Structural and Construction Engineering, 2018. 6.
14
[15] Asgarian, B. and S. Moradi, Seismic response of steel braced frames with shape memory alloy braces. Journal of Constructional Steel Research, 2011. 67(1): p. 65-74.
15
[16] Jahangir, H. and M. Bagheri, Evaluation of Seismic Response of Concrete Structures Reinforced by Shape Memory Alloys. International Journal of Engineering, 2020. 33(3): p. 410-418.
16
[17] Maleki, S. and S. Bagheri, Pipe damper, Part I: Experimental and analytical study. Journal of Constructional Steel Research, 2010. 66(8-9): p. 1088-1095.
17
[18] Maleki, S. and S. Mahjoubi, Dual-pipe damper. Journal of Constructional Steel Research, 2013. 85: p. 81-91.
18
[19] Mahjoubi, S. and S. Maleki, Seismic performance evaluation and design of steel structures equipped with dual-pipe dampers. Journal of Constructional Steel Research, 2016. 122: p. 25-39.
19
[20] Cheraghi, A. and S.M. Zahrai, Innovative multi-level control with concentric pipes along brace to reduce seismic response of steel frames. Journal of Constructional Steel Research, 2016. 127: p. 120-135.
20
[21] Reisi, A., H.R. Mirdamadi, and M.A. Rahgozar, Numerical and experimental study of the nested-eccentric-cylindrical shells damper. Earthquakes and Structures, 2020. 18(5): p. 637-648.
21
[22] Specification, A., 5L. 2004. Specification for Line Pipe, 43rd Edition. Washington DC: American Petroleum Institute, 2004.
22
[23] ABAQUS Finite Element Analysis Program 2013.
23
[24] Abbasnia, R., et al., Experimental and analytical investigation on the steel ring ductility. Sharif J. Sci. Technol, 2008. 52: p. 41-48.
24
[25] GOST (ГОСТ) 8733, Seamless cold and warm deformed pipes. 1976. GOST Standards of the Russian Federation, Russia
25
[26] FEMA, FEMA 461: Interim protocols for determining seismic performance characteristics of structural and nonstructural components through laboratory testing. 2006, Applied Technology Council Redwood City, CA.
26
[27] Whidden, W.R. Buried flexible steel pipe: Design and structural analysis. 2009. American Society of Civil Engineers.
27
[28] Krawinkler, H., ATC-24: Guidelines for Cyclic Seismic Testing of Components of Steel Structures. Redwood City, Report prepared for the Applied Technology Council, 1992.
28
[29] Chopra, A.K., Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall. Inc., Upper Saddle River, NJ, 1995.
29
ORIGINAL_ARTICLE
مطالعه عددی و آزمایشگاهی گسیختگی بتن تقویت شده با ورق CFRP تحت بارگذاری کششی و برشی
در این مقاله مقاومت چسبندگی و نحوه گسیختگی بتن تقویت شده با ورق CFRP تحت تنشهای کششی و برشی با استفاده از روش المان محدود غیرخطی و روش آزمایشگاهی بررسی میگردد. با توجه به اینکه در بررسی رفتار مکانیکی بتن تقویت شده با ورق CFRP فرض همگن بودن بتن منجر به نتایج غیرواقعی میشود، لذا در مقاله حاضر از مدل میانمقیاس برای مدلسازی بتن استفاده شده است. در مدل میانمقیاس بتن به عنوان یک ماده غیرهمگن سه فازه مشتمل بر سه فاز سنگدانه، ملات و ناحیه انتقال (ITZ) در نظر گرفته میشود. در مدل عددی برای شبیهسازی چسب در ناحیه اتصال ورق CFRP به بتن از مدل ناحیه چسبنده (CZM) موجود در نرمافزار آباکوس استفاده شده و نتایج بدست آمده از روش المان محدود با نتایج آزمایشگاهی مقایسه شده است. آزمایشهای انجام شده شامل آزمایش "کشش از سطح" و "پیچش" میباشد. نتایج ارائه شده نشان میدهد مقاومت چسبندگی کششی و برشی در مدل المان محدود به ترتیب 18% و 13% بیشتر از نتایج مربوط به آزمایش "کشش از سطح" و "پیچش" بدست آمده است. همچنین مقاومت چسبندگی کششی حاصل از مدل عددی و آزمایشگاهی به ترتیب 34% و 33% کمتر از مقاومت چسبندگی برشی بدست آمده است. مطابق نتایج بدست آمده، جداشدگی در نمونه بتنی تقویت شده با ورق CFRP از بتن بستر بوده است. نتایج حاکی از آن است که ریزترکها و به دنبال آن گسیختگی در فازهای ملات و ITZ بتن به دلیل تخلخل بالا و مقاومت کمتر نسبت به فاز سنگدانه، به راحتی گسترش مییابد.
https://ceej.aut.ac.ir/article_4257_21a88dd2a742d0e33d683b63ca564265.pdf
2021-03-21
35
56
10.22060/ceej.2021.19027.7033
بتن تقویت شده با CFRP
میانمقیاس
ناحیه چسبنده
کشش از سطح
پیچش
رزا
رهبری
r.rahbari@edu.ikiu.ac.ir
1
دانشکدة فنی و مهندسی، دانشگاه بین المللی امام خمینی (ره)
AUTHOR
محمود
نادری
profmahmoodnaderi@eng.ikiu.ac.ir
2
دانشگاه بینالمللی امام خمینی (ره)، قزوین، ایران
LEAD_AUTHOR
[1] A. Di Tommaso, U. Neubauer, A. Pantuso, F.S. Rostasy, Behavior of adhesively bonded concrete-CFRP joints at low and high temperatures, Mechanics of Composite Materials, 37(4) (2001) 327-338 %@ 0191-5665.
1
[2] J. Yao, J.G. Teng, J.F. Chen, Experimental study on FRP-to-concrete bonded joints, Composites Part B: Engineering, 36(2) (2005) 99-113 %@ 1359-8368.
2
[3] J.G. Teng, J.-F. Chen, S.T. Smith, L. Lam, FRP: strengthened RC structures, 2002.
3
[4] B. Mohammadi, K.S. Asl, A. Farrokhabadi, Matrix cracking and induced delamination in symmetrically laminated composites subjected to static loading by using multi scale damage mechanics, (2017).
4
[5] V. Palmieri, L. De Lorenzis, Multiscale modeling of concrete and of the FRP–concrete interface, Engineering Fracture Mechanics, 131 (2014) 150-175 %@ 0013-7944.
5
[6] Y.B. Zaitsev, F.H. Wittmann, Simulation of crack propagation and failure of concrete, Matériaux et Construction, 14(5) (1981) 357-365 %@ 0025-5432.
6
[7] G.I. Barenblatt, The mathematical theory of equilibrium cracks in brittle fracture, Advances in applied mechanics, 7(1) (1962) 55-129.
7
[8] J. Wang, Cohesive-bridging zone model of FRP–concrete interface debonding, Engineering fracture mechanics, 74(17) (2007) 2643-2658 %@ 0013-7944.
8
[9] F. Chen, P. Qiao, Debonding analysis of FRP–concrete interface between two balanced adjacent flexural cracks in plated beams, International journal of solids and structures, 46(13) (2009) 2618-2628 %@ 0020-7683.
9
[10] R. Xu, C. Liu, CZM-based debonding simulation of cracked beams strengthened by FRP sheets, Journal of engineering mechanics, 138(2) (2012) 210-220 %@ 0733-9399.
10
[11] C. Carloni, T. D’Antino, L.H. Sneed, C. Pellegrino, Three-dimensional numerical modeling of single-lap direct shear tests of FRCM-concrete joints using a cohesive damaged contact approach, Journal of Composites for Construction, 22(1) (2018) 04017048 %@ 04011090-04010268.
11
[12] B.S. En, 480-11. Admixtures for concrete, mortar and grout-test methods-part 11: determination of air void characteristics in hardened concrete, London: British Standards Institution, (2005).
12
[13] A.I. Astm, D7522, D7522M,“Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate, (2015).
13
[14] D. Astm, 4541, Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers, Annual Book of ASTM Standards, (2002) 1-13.
14
[15] M. Naderi, New twist-off method for the evaluation of in-situ strength of concrete, Journal of Testing and Evaluation, 35(6) (2007) 602-608 %@ 0090-3973.
15
[16] A.J. Wagner, A practical introduction to the lattice Boltzmann method, Adt. notes for Statistical Mechanics, 463 (2008) 663.
16
[17] Q. Xiong, X. Wang, A.P. Jivkov, A 3D multi-phase meso-scale model for modelling coupling of damage and transport properties in concrete, Cement and Concrete Composites, 109 (2020) 103545 %@ 100958-109465.
17
[18] F. Javidrad, M. Mashayekhy, A Cohesive zone model for crack growth simulation in AISI 304 Steel, Journal of Solid Mechanics, 6(4) (2014) 378-388 %@ 2008-3505.
18
[19] X.Z. Lu, J.G. Teng, L.P. Ye, J.J. Jiang, Bond–slip models for FRP sheets/plates bonded to concrete, Engineering structures, 27(6) (2005) 920-937 %@ 0141-0296.
19
[20] M.L. Benzeggagh, M. Kenane, Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus, Composites science and technology, 56(4) (1996) 439-449 %@ 0266-3538.
20
[21] X. Liu, J. Jiang, G. Wang, J. Wang, R. Xu, Debonding analysis of curved RC beams externally bonded with FRP plates using CZM, Engineering Structures, 205 (2020) 110103 %@ 110141-110296.
21
[22] L.N. Lowes, Finite element modeling of reinforced concrete beam-column bridge connections, University of California, Berkeley, 1999.
22
[23] I.M. Nikbin, M.H.A. Beygi, M.T. Kazemi, J.V. Amiri, E. Rahmani, S. Rabbanifar, M. Eslami, A comprehensive investigation into the effect of aging and coarse aggregate size and volume on mechanical properties of self-compacting concrete, Materials & Design, 59 (2014) 199-210 %@ 0261-3069.
23
[24] O. Buyukozturk, O. Gunes, E. Karaca, Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites, Construction and Building Materials, 18(1) (2004) 9-19 %@ 0950-0618.
24
[25] R. Chendes, S. Dan, L. Courard, Comparison of shear and pull-off tests for testing adhesion of different content limestone fillers mortars used as repair system, Construction sustainability: efficient solution for design, execution and rehabilitation of the building %@ 6065546623, (2013).
25
ORIGINAL_ARTICLE
تأثیر کاهش پارامتر آسیب کششی در تحلیل غیرخطی سازههای بتن مسلح به روش آسیب پلاستیک بتن
عموماً یکی از قسمتهای مهم در مدلسازی سازههای بتن مسلح، معرفی رفتار مصالح بتن و فولاد در نرمافزارهای اجزای محدود می باشد. در نرمافزار آباکوس برای تحلیل غیرخطی بتن مسلح روشهای مختلفی وجود دارد، که یکی از این روشها استفاده از مدل آسیب پلاستیک بتن است. در این روش، معرفی مشخصات مکانیکی بتن در قسمتهای آسیب فشاری و کششی بتن از اهمیت ویژهای برخوردار است، بطوری که وارد نمودن تعداد نقاط زیاد پارامترهای آسیب فشاری و کششی بتن، باعث افزایش زمان تحلیل نرمافزار و گاهی سبب عدم همگرایی حل مسأله میگردد. در مدلسازی عددی در نرمافزار آباکوس به روش آسیب پلاستیک بتن دو شرط وجود دارد که بایستی رعایت گردند. اولاً کرنشهای پلاستیک بتن مثبت باشند و ثانیاً با افزایش مقدار کرنش بتن، مقدار کرنشهای پلاستیک بتن نیز صعودی باشند. به همین دلیل این دو شرط موجب حذف و کاهش برخی نقاط در اطلاعات ورودی مصالح بتن در روش آسیب پلاستیک بتن میگردند. در این تحقیق برای تحلیل یک سازه بتن مسلح با نرمافزار آباکوس در قسمت آسیب فشاری بتن، ابتدا تعداد نقاط پارامترهای تنش فشاری بتن، کرنش فشاری بتن و آسیب فشاری (dc) بطور کامل وارد میشوند. بعد در قسمت آسیب کششی بتن، تعداد نقاط پارامتر خسارت کششی بتن (dt) نیز بطور کامل وارد میگردند. سپس تعداد نقاط تنش کششی بتن و کرنش ترکخوردگی بتن کاهش داده میشوند تا تأثیر کاهش این نقاط بر ظرفیت سازه بتن مسلح مشخص شود. نتایج تحلیل غیرخطی سازه بتن مسلح در اثر کاهش تعداد نقاط پارامترهای مذکور به صورت منحنیهای نیرو - جابهجایی مشخص گردیدهاند و نتایج نشان میدهند که با کاهش تعداد این نقاط، با خطای کمی، زمان اجرای تحلیل سازه بطور چشم گیری کاهش مییابد.
https://ceej.aut.ac.ir/article_4298_7fae2d3a46d80f8a4dd8120b09ef0434.pdf
2021-03-21
57
70
10.22060/ceej.2021.19021.7031
آسیب پلاستیک بتن
تحلیل غیرخطی
پارامتر خسارت کششی بتن
آباکوس
بتن مسلح
احسان
عراقی زاده
ehsanaraghi2000@yahoo.com
1
دانشگاه آزاد اسلامی واحد سیرجان. گروه سازه
AUTHOR
رامین
طباطبائی میرحسینی
tabatabaei@iauk.ac.ir
2
گروه مهندسی عمران دانشگاه آزاد اسلامی، واحد کرمان، کرمان، ایران
LEAD_AUTHOR
[1] J. Lubliner, J. Oliver, S. Oller, E. Oñate, A plastic-damage model for concrete, International Journal of solids and structures, 25 (1989) 299-326.
1
[2] J. Faleiro, S. Oller, A.H. Barbat, Plastic‐damage analysis of reinforced concrete frames, Engineering Computations, (2010).
2
[3] A.C.T. Chen, W.-F. Chen, Constitutive relations for concrete, Journal of Engineering Mechanics, 101 (1975).
3
[4] F.B. Lin, Z.P. Bažant, J.C. Chern, A.H. Marchertas, Concrete model with normality and sequential identification, Computers & structures, 26 (1987) 1011-1025.
4
[5] P. Grassl, M. Jirásek, Damage-plastic model for concrete failure, International journal of solids and structures, 43 (2006) 7166-7196.
5
[6] J. Mazars, G. Pijaudier-Cabot, Continuum damage theory—application to concrete, Journal of engineering mechanics, 115 (1989) 345-365.
6
[7] S. Fichant, C. La Borderie, G. Pijaudier‐Cabot, Isotropic and anisotropic descriptions of damage in concrete structures, Mechanics of Cohesive‐frictional Materials: An International Journal on Experiments, Modelling and Computation of Materials and Structures, 4 (1999) 339-359.
7
[8] J. Lee, G.L. Fenves, Plastic-damage model for cyclic loading of concrete structures, Journal of engineering mechanics, 124 (1998) 892-900.
8
[9] R. Faria, J. Oliver, M. Cervera, A strain-based plastic viscous-damage model for massive concrete structures, International journal of solids and structures, 35 (1998) 1533-1558.
9
[10] P. Grassl, M. Jirásek, Plastic model with non‐local damage applied to concrete, International Journal for Numerical and Analytical Methods in Geomechanics, 30 (2006) 71-90.
10
[11] M. Ortiz, A constitutive theory for the inelastic behavior of concrete, Mechanics of materials, 4 (1985) 67-93.
11
[12] J.C. Simo, J.W. Ju, Strain-and stress-based continuum damage models—I. Formulation, International journal of solids and structures, 23 (1987) 821-840.
12
[13] R.K.A. Al-Rub, S.-M. Kim, Computational applications of a coupled plasticity-damage constitutive model for simulating plain concrete fracture, Engineering Fracture Mechanics, 77 (2010) 1577-1603.
13
[14] U. Häussler-Combe, J. Hartig, Formulation and numerical implementation of a constitutive law for concrete with strain-based damage and plasticity, International Journal of Non-Linear Mechanics, 43 (2008) 399-415.
14
[15] M. Sun, D. Xin, C. Zou, Damage evolution and plasticity development of concrete materials subjected to freeze-thaw during the load process, Mechanics of Materials, 139 (2019) 103192.
15
[16] L. Qingfu, G. Wei, K. Yihang, Parameter calculation and verification of concrete plastic damage model of ABAQUS, in: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2020, pp. 12036.
16
[17] K. Hibbitt, ABAQUS: User’s Manual; Hibbitt, Karlsson, and Sorensen, Inc.: Pawtucket, RI, USA, (2013).
17
[18] S. Oller, A continuous damage model for frictional materials, Technical University of Catalonia, Barcelona, Spain, (1988).
18
[19] S. Oller, Nonlinear dynamics of structures, (2014).
19
[20] M. Poliotti, J.-M. Bairán, A new concrete plastic-damage model with an evolutive dilatancy parameter, Engineering structures, 189 (2019) 541-549.
20
[21] F. Lopez-Almansa, B. Alfarah, S. Oller, Numerical simulation of RC frame testing with damaged plasticity model. Comparison with simplified models, in: Second European conference on Earthquake Engineering and Seismology, Istanbul, Turkey, 2014.
21
[22] D.A. Hordijk, Tensile and tensile fatigue behaviour of concrete; experiments, modelling and analyses, Heron, 37 (1992).
22
[23] F.J. Vecchio, M.B. Emara, Shear deformations in reinforced concrete frames, ACI Structural journal, 89 (1992) 46-56.
23
[24] M.B. Emara, Shear deformations in reinforced concrete frames., (1992).
24
[25] B. Alfarah, F. López-Almansa, S. Oller, New methodology for calculating damage variables evolution in Plastic Damage Model for RC structures, Engineering Structures, 132 (2017) 70-86.
25
ORIGINAL_ARTICLE
توسعه منحنیهای شکنندگی لرزهای مخازن بتنی استوانهای با استفاده از تحلیل غیرخطی
مطالعه گزارشات خرابی لرزهای مخازن در زلزلههای گذشته نشان میدهد که یکی از آسیبهای عمده در مخازن بتنی که معمولا برای ذخیره آب استفاده میشوند، ترکخوردگی و نشت مایع درون آن میباشد.از این رو، در مقاله حاضر، تحلیل و ارزیابی مخازن بتنی روزمینی، به منظور توسعه منحنی آسیبپذیری برای این مخازن تحت بررسی قرار گرفته است.بدین منظور، تحلیلهای عددی غیرخطی با لحاظ کردن ترکخوردگی بتن، برای سه تیپ مخزن استوانهای بتنی با نسبت ارتفاع به قطر متغیر انجام شده است.سپس، منحنیهای شکنندگی مخازن برای عرض ترک بحرانی بر اساس توصیه نشریه 123 استخراج گردیده است. این منحنیها با نتایج تحقیقات قبلی که در حالت خطی و بدون لحاظ کردن ترک بدنه مخزن انجام شده است، مقایسه شده و در خصوص اثرات اعمال عرض ترک در آنالیزها بحث شده است. نتایج حاکی از لزوم اعمال شرایط ترکخوردگی مخزن در انجام آنالیزهای دینامیکی فزاینده و استخراج منحنیهای شکنندگی دارد. در مخازن بلند در نظر گرفتن رفتار غیرخطی بتن در تحلیلها حیاتی بوده و منحنیهای شکنندگی بدست آمده با تحلیل خطی از اعتبار کمی برخوردار است. به طور کلی با افزایش نسبت ارتفاع به قطر مخازن مورد بررسی پژوهش از مخزن کوتاه به متوسط 25% و از مخزن متوسط به بلند 50% احتمال آسیبپذیری مخازن بر اساس منحنی شکنندگی افزایش مییابد.
https://ceej.aut.ac.ir/article_4302_6261c080cd36abd4c1ef400adc59b883.pdf
2021-03-21
71
88
10.22060/ceej.2021.19121.7079
مخازن بتنی استوانهای
تحلیل دینامیکی فزاینده غیرخطی
منحنی شکنندگی (آسیبپذیری) لرزهای
مدلسازی عددی
شایان
خسروی
shayan.khosravi@stu.iiees.ac.ir
1
کارشناسی ارشد مهندسی عمران، پژوهشکده سازه، پژوهشگاه بین المللی مهندسی زلزله و زلزله شناسی، تهران، ایران
AUTHOR
محمد مهدی
یوسفی
mmy101112@gmail.com
2
دانشجوی دکتری ، گرایش سازه، دانشکده عمران، دانشگاه نوشیروانی بابل
AUTHOR
محمد علی
گودرزی
m.a.goodarzi@iiees.ac.ir
3
دانشیار پژوهشکده مهندسی سازه پژوهشگاه بین المللی مهندسی زلزله و زلزله شناسی تهران ایران
LEAD_AUTHOR
[1] SYNER-G. "D8.10 - Guidelines for deriving seismic fragility functions of elements at risk: Buildings, lifelines, transportation networks and critical facilities." (2013).
1
[2] MR, HAZUS-MH. "Multi-hazard loss estimation methodology: Earthquake model." Department of Homeland Security, FEMA, Washington, DC (2003).Porter, Keith. "Beginner’s guide to fragility, vulnerability, and risk." Encyclopedia of earthquake engineering (2015): 235-260.
2
[3] Bhargava, Kapilesh, A. K. Ghosh, and S. Ramanujam. "Seismic response and fragility analysis of a water storage structure." Nuclear engineering and design 235.14 (2005): 1481-1501.
3
[4] Razzaghi, M. S., and S. Eshghi. "Development of analytical fragility curves for cylindrical steel oil tanks." Proccedings of the 14 Th World Conference on Earthquake Engineering. (2008).
4
[5] Berahman, Farshad, and Farhad Behnamfar. "Probabilistic seismic demand model and fragility estimates for critical failure modes of un-anchored steel storage tanks in petroleum complexes." Probabilistic Engineering Mechanics 24.4 (2009): 527-536.
5
[6] Razzaghi, Mehran S., and Alireza Mohebbi. "Predicting the seismic performance of cylindrical steel tanks using artificial neural networks (ann)." Acta Polytechnica Hungarica 8.2 (2011).
6
[7] Colombo, J. I., and J. L. Almazán. "Seismic fragility curves for legged wine storage tanks with a novel isolation device." Procedia engineering 199 (2017): 564-569.
7
[8] Yazdabad, Mohammad, Farhad Behnamfar, and Abdolreza K. Samani. "Seismic behavioral fragility curves of concrete cylindrical water tanks for sloshing, cracking, and wall bending." Earthquakes and Structures 14.2 (2018): 95-102.
8
[9] Hajimehrabi, Hossein, et al. "Fragility curves for baffled concrete cylindrical liquid-storage tanks." Soil Dynamics and Earthquake Engineering 119 (2019): 187-195.
9
[10] ACI Committee 350.3-06, "Seismic Design of Liquid-Containing Concrete Structures and Commentary" , Farmington Hills (MI,USA), American Concrete Institute, 2006.
10
[11] Technical Assistant, Office of Research and Technical Criteria, Planning and Budget Organization, "Criteria and Criteria for Designing and Calculating Groundwater Reservoirs", Review 123, 2015
11
[12] Munshi, J.A., "Design of Liquid-Containing Concrete Structures for Earthquake
12
Forces. " Portland Cement, USA, )2002(.
13
[13] Ru-deng, L. U. O. "Values of shear transfer coefficients of concrete element Solid65 in Ansys [J]." Journal of Jiangsu University (Natural Science Edition) 2 (2008): 018.
14
[14] Vasudevan, G., S. Kothandaraman, and S. Azhagarsamy. "Study on non-linear flexural behavior of reinforced concrete beams using ANSYS by discrete reinforcement modeling." Strength of materials 45.2 (2013): 231-241.
15
[15] Eads, Laura, et al. "An efficient method for estimating the collapse risk of structures in seismic regions." Earthquake Engineering & Structural Dynamics 42.1 (2013): 25-41.
16
[16] Wells, Donald L., and Kevin J. Coppersmith. "New empirical relationships among magnitude, rupture length, rupture width, rupture area, and surface displacement." Bulletin of the seismological Society of America 84.4 (1994): 974-1002.
17
[17] Tehran Engineering and Engineering Consulting Organization Geotechnical and Resistance Materials Research Center, Department of Surface and Subsurface Studies, "Tehran Geotechnical Zoning Report" (2017).
18
[18] Vamvatsikos, Dimitrios, and C. Allin Cornell. Seismic performance, capacity and reliability of structures as seen through incremental dynamic analysis. Diss. Stanford University, 2002.
19
[19] Moslemi, M., and M. R. Kianoush. "Parametric study on dynamic behavior of cylindrical ground-supported tanks." Engineering Structures 42 (2012): 214-230.
20
[20] Baker, Jack W. "Efficient analytical fragility function fitting using dynamic structural analysis." Earthquake Spectra 31.1 (2015): 579-599.
21
ORIGINAL_ARTICLE
بررسی اثر ویژگیهای راننده و وسیله نقلیه بر ریسک تصادفات عبور از چراغ قرمز
عبور از چراغ قرمز یکی از شایعترین انواع تخلفات در تقاطعات چراغدار است که در آن وسایل نقلیه بدون توجه به چراغ از تقاطع عبور می کنند و ایمنی خود و سایر کاربران را در معرض خطر قرار می دهند. پژوهش حاضر به بررسی ویژگی های راننده و وسیله نقلیه که در ریسک وقوع تصادفات عبور از چراغ در کشور ایران مؤثر است می پردازد. روش مطالعه بر اساس مفهوم مواجهه شبه القایی و مدل رگرسیون لوجستیک برای 10 متغیر مستقل و یک متغیر وابسته ی دوگانه ی "وضعیت تقصیر راننده" در تصادف می باشد. جامعه ی آماری مورد استفاده شامل 12445 تصادف عبور از چراغ قرمز طی سالهای 1390 تا 1395 می باشد. نتایج نشان داد عوامل نوع وسیله نقلیه، بومی بودن، نوع گواهینامه و تحصیلات راننده بر ریسک مقصر بودن رانندگان در این نوع تصادفات تأثیر می گذارند. بر اساس مدل رگرسیون لوجستیک، وسایلنقلیه کامیون و امدادی، غیربومی بودن رانندگان و گواهی نامه ی پایه 2 موجب افزایش ریسک مقصر بودن می شود، اما تحصیلات دانشگاهی رانندگان ریسک مقصر بودن آنان را کاهش می دهد. در انتها نیز بر اساس نتایج بدست آمده از مطالعه برخی اقدامات پیش گیرانه به منظور کاهش ریسک تصادفات عبور از چراغ پیشنهاد شده است.
https://ceej.aut.ac.ir/article_4299_4d36190170acff06a57bb2b43f074b31.pdf
2021-03-21
89
106
10.22060/ceej.2021.19246.7113
عبور از چراغ قرمز
مواجههی شبهالقایی
رگرسیون لوجستیک
ریسک نسبی
تقاطعات چراغدار
علی
توکلی کاشانی
alitavakoli@iust.ac.ir
1
دانشیار، دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران
LEAD_AUTHOR
سعیده
امیری فر
saeideh1992@gmail.com
2
دانشجوی دکترا، دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران
AUTHOR
علی
میرهاشمی
ali_mir@civileng.iust.ac.ir
3
کارشناس ارشد، دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران
AUTHOR
[1] I.R.a.T.A. Database", International Road and Traffic Accident Database (IRTAD), Road safety annual report, 2018.
1
[2] Road Traffic Injuries in Iran and their Prevention, A Worrying Picture, in.
2
[3] FHWA, in, federal highway administration, 2017.
3
[4] G. Zhang, Y. Tan, R.-C. Jou, Factors influencing traffic signal violations by car drivers, cyclists, and pedestrians: A case study from Guangdong, China, Transportation research part F: traffic psychology and behaviour, 42 (2016) 205-216.
4
[5] A. Jensupakarn, K. Kanitpong, Influences of motorcycle rider and driver characteristics and road environment on red light running behavior at signalized intersection, Accident Analysis and Prevention, (2018).
5
[6] J. Wang, H. Huang, P. Xu, S. Xie, S. Wong, Random parameter probit models to analyze pedestrian red-light violations and injury severity in pedestrian–motor vehicle crashes at signalized crossings, Journal of Transportation Safety & Security, (2019) 1-20.
6
[7] N. Elmitiny, X. Yan, E. Radwan, C. Russo, D. Nashar, Classification analysis of driver’s stop/go decision and red-light running violation, Accident Analysis and Prevention, (2009).
7
[8] M. Li, X. Chen, X. Lin, D. Xu, Y. Wang, Connected vehicle-based red-light running prediction for adaptive signalized intersections, Journal of Intelligent Transportation Systems, 22(3) (2018) 229-243.
8
[9] H. Park, N. Pugh, Generalized Estimating Equation Model Based Recursive Partitioning: Application to Distracted Driving, Journal of Advanced Transportation, 2018 (2018).
9
[10] Y. Zhang, X. Yan, X. Li, J.W. 3, V.V. Dixit, Red-Light-Running Crashes’ Classification, Comparison, and Risk Analysis Based on General Estimates System (GES) Crash Databas, Invironmental research and public health, (2018).
10
[11] V. Sharifianjazi, H. Nassiri, Adverse effect of red light violation (RLV) in urban signalized intersections in Iran, International Journal of Civil Engineering, 15(8) (2017) 1107-1116.
11
[12] A.C. Wolfe, The concept of exposure to the risk of a road traffic accident and an overview of exposure data collection methods, Accident Analysis & Prevention, 14(5) (1982).
12
[13] D.J.T.R.R. Lord, Application of accident prediction models for computation of accident risk on transportation networks, 1784(1) (2002) 17-26.
13
[14] N. Stamatiadis, J. Deacon, Quasi induced exposure:Methodology and insight, Accident Analysis and Prevention 29 (1996).
14
[15] N. Stamatiadis, J.A. Deacon, Trends in highway safety: effects of an aging population on accident propensity, Accident Analysis & Prevention, 27(4) (1995) 443-459.
15
[16] H. Huang, H.C. Chin, Disaggregate Propensity Study on Red Light Running Crashes Using Quasi-Induced Exposure Method, Journal of transportation engineering (2009).
16
[17] S. Liew, R. Hamidun, N.F.M. Soid, Differences of driving experience and gender on traffic offences among Malaysian motorists, in: MATEC Web of Conferences, EDP Sciences, 2017, pp. 08016.
17
[18] B.H. Al-Omari, H.R. Al-Masaeid, Red light violations at rural and suburban signalized intersections in Jordan, Traffic injury prevention, 4(2) (2003) 169-172.
18
[19] Z.R. Doerzaph, R. Bhagavathula, Identification of factors related to violation propensity: mining the data of the Franklin intersections, Virginia Tech Transportation Institute: Blacksburg, (2011).
19
[20] S.S. Washburn, K.G. Courage, Investigation of Red Light Running Factors, Southeast Transportation Center The University of Tennessee Knoxville, Tennessee, Department of Civil and Coastal Engineering University of Florida, 2004.
20
[21] P. Intini, P. Colonna, E.O. Ryeng, Route familiarity in road safety: A literature review and an identification proposal, Transportation research part F: traffic psychology and behaviour, 62 (2019) 651-671.
21
[22] P. Intini, N. Berloco, P. Colonna, V. Ranieri, E. Ryeng, Exploring the relationships between drivers’ familiarity and two-lane rural road accidents. A multi-level study, Accident Analysis & Prevention, 111 (2018) 280-296.
22
[23] J. Wu, H. Xu, The influence of road familiarity on distracted driving activities and driving operation using naturalistic driving study data, Transportation research part F: traffic psychology and behaviour, 52 (2018) 75-85.
23
[24] C. Liu, T.J. Ye, Run-off-road crashes: An on-scene perspective, 2011.
24
[25] G. Yannis, J. Golias, E. Papadimitriou, Accident risk of foreign drivers in various road environments, Journal of safety research, 38(4) (2007) 471-480.
25
[26] K. Yoh, T. Okamoto, H. Inoi, K. Doi, Comparative study on foreign drivers' characteristics using traffic violation and accident statistics in Japan, IATSS research, 41(2) (2017) 94-105.
26
[27] A.H. Young, A.K. Mackenzie, R.L. Davies, D. Crundall, Familiarity breeds contempt for the road ahead: The real-world effects of route repetition on visual attention in an expert driver, Transportation research part F: traffic psychology and behaviour, 57 (2018) 4-9.
27
[28] W. Jin, Y. Deng, H. Jiang, Q. Xie, W. Shen, W. Han, Latent class analysis of accident risks in usage-based insurance: Evidence from Beijing, Accident Analysis & Prevention, 115 (2018) 79-88.
28
[29] X. Yan, E. Radwan, E. Birriel, Analysis of Red Light Running Crashes Based on Quasi-Induced Exposure and Multiple Logistic Regression Method, Transportation Research Board, (2005).
29
[30] V. Martínez-Ruiza, P. Lardelli-Clareta, E. Jiménez-Mejíasa, C. Amezcua-Prietoa, J.J. Jiménez-Moleóna, J.d.D.L.d. Castillo, Risk factors for causing road crashes involving cyclists: An application of a quasi-induced exposure method, Accident Analysis and Prevention, (2012).
30
[31] M. Vujanić, D. Pešić, B. Antić, N. Marković, selection and assessment of the relevant data for reducing the number of red-light running, (2016).
31
[32] H. heydari, M. khosravi, Investigating the relationship between socioeconomic status and respect for traffic rules, Rahvar, 13(35) (1395) 129-155.
32
[33] Global status report on road safety, world health organization, World Health Organization, 2018.
33
ORIGINAL_ARTICLE
جایگزینی سیمان با پودر نخالههای بتنی در بتنهای حاوی سنگدانههای بازیافتی (بررسی خصوصیات مکانیکی، اقتصادی و محیط زیستی)
در این تحقیق خصوصیات روانی، مکانیکی (مقاومت فشاری، کششی و خمشی)، اقتصادی و محیط زیستی نمونههای ساخته شده از 28 طرح اختلاط مختلف بررسی شد. در این طرحهای اختلاط 0، 15 و 30 درصد سیمان پرتلند معمولی (OPC) با پودر بازیافتی از نخالههای بتنی (RCP) و میکروسیلیس (SF) و 0، 50 و 100 درصد سنگدانههای طبیعی (NA) با سنگدانههای بازیافتی از نخالههای بتنی (RCA) جایگزین شدند. نخالههای بتنی با مقاومتهای اولیه 20، 40 و 80 مگاپاسکال در تهیه RCA مورد استفاده قرار گرفت. نتایج نشان داد که استفاده از RCA بعنوان جایگزین NA و RCP بعنوان جایگزین OPC بر خصوصیات روانی و مکانیکی تأثیر منفی و بر خصوصیات محیط زیستی و اقتصادی تأثیر مثبت دارد. بررسی نتایج نشان داد که تأثیر منفی ناشی از RCA با افزایش مقاومت اولیه نخالههای بتنی مورد استفاه در تولید آن و تأثیر منفی ناشی از RCP با استفاده از SF برطرف میگردد. در نهایت، با انجام بهینهیابی چند متغیره بین طرحهای اختلاط این نتیجه حاصل شد که جایگزینی50 درصد از NA با RCA با مقاومت اولیه 40 و 80 مگاپاسکال و جایگزینی 30 درصد از OPC با RCP و SF از لحاظ خصوصیات روانی، مکانیکی، اقتصادی و محیط زیستی توجیه دارد.
https://ceej.aut.ac.ir/article_4309_659589b8db6675724d9506152d3ac1ec.pdf
2021-03-21
107
126
10.22060/ceej.2021.19255.7114
سنگدانههای بازیافتی
پودر بازیافتی
خصوصیات مکانیکی
محیط زیست
بهینهیابی
مهدی
ابدالی
mehdiabdaki@gmail.com
1
کارشناس ارشد مهندسی عمران، دانشگاه لرستان، خرم آباد، ایران
AUTHOR
فریدون
امیدی نسب
omidinasab.f@lu.ac.ir
2
گروه عمران، دانشکده فنی و مهندسی، دانشگاه لرستان
LEAD_AUTHOR
امیرحسین
صحرایی مقدم
ah.sahraei73@gmail.com
3
دانشجوی دکتری مهندسی عمران، دانشگاه صنعتی نوشیروانی، بابل، ایران
AUTHOR
[1] J. De Brito, N. Saikia., Recycled aggregate in concrete: use of industrial, construction and demolition waste, Springer Science & Business Media. (2012).
1
[2] US Geological Survey (2011) USGS mineral program cement report, United States Geological Survey.
2
[3] H. Shima, H. Tateyashiki, R. Matsuhashi, Y. Yoshida., An advanced concrete recycling technology and its applicability assessment through input-output analysis, Journal of advanced concrete technology. 3(1) (2005) 53-67.
3
[4] C. Xue, A. Shen, Y. Guo, T. He., Utilization of Construction Waste Composite Powder Materials as Cementitious Materials in Small-Scale Prefabricated Concrete, Advances in Materials Science and Engineering. (2016).
4
[5] E. Kwon, J. Ahn, B. Cho, D. Park., A study on development of recycled cement made from waste cementitious powder, Construction and Building Materials. 83 (2015) 174-180.
5
[6] Q. Liu, T. Tong, S. Liu, D. Yang, Q. Yu., Investigation of using hybrid recycled powder from demolished concrete solids and clay bricks as a pozzolanic supplement for cement, Construction and Building Materials. 73 (2014) 754-763.
6
[7] S. Ahmari, X. Ren, V. Toufigh, L. Zhang., Production of geopolymeric binder from blended waste concrete powder and fly ash, Construction and Building Materials. 35 (2012) 718-729.
7
[8] X. Ma, Z. Wang., Effect of ground waste concrete powder on cement properties, Advances in Materials Science and Engineering. (2013).
8
[9] Y. J. Kim, Y. W. Choi., Utilization of waste concrete powder as a substitution material for cement, Construction and building materials. 30 (2012) 500-504.
9
[10] M. Ahmadi, A. Hasani, M. Soleymani., Role of Recycled Steel Fibers from Tires on Concrete Containing Recycled Aggregate from Building Waste, Concrete research journal. 7 (2) (2014) 57-68. (In Persian)
10
[11] N. D. Oikonomou., Recycled concrete aggregates, Cem Concr Compos. 27 (2) (2005) 315-318.
11
[12] C.A. Carneiro, P.R.L. Lima, M.B. Leite, R.D.T. Filho., Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concrete, Cement and Concrete Composites. 46 (2017) 886-893.
12
[13] R. Chan, X. Liu, I. Galobardes., Parametric study of functionally graded concretes incorporating steel fibres and recycled aggregates, Construction and Building Materials. 242 (2020) 118186.
13
[14] A. Sahraei Moghadam, F. Omidinasab, S. Moazami Goodarzi., Assessment of mechanical properties of environmentally friendly concrete with emphasis on selection of optimal mix designs in terms of resistance and economy, Amirkabir journal of civil engineering. (2020) 17920-6712. (In Persian)
14
[15] V. Afroughsabet, L. Biolzi, T. Ozbakkaloglu., Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete, Composite Structures. 181 (2017) 273-284.
15
[16] ASTM C 39/C 39M-03 (2003). “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.”
16
[17] M. D. J. Sanchez, P.A. Gutierrez., Study on the influence of attached mortar content on the properties of recycled concrete aggregate, Construction and building materials. 23 (2009) 872-877.
17
[18] M. Pepe, R. D. Toledo Filho, E. A. Koenders, E. Martinelli., Alternative processing procedures for recycled aggregates in structural concrete, Construction and Building Materials. 69 (2014) 124-132.
18
[19] ASTM C125-19, Standard Terminology Relating to Concrete and Concrete Aggregates, ASTM International, West Conshohocken, PA, 2019.
19
[20] ASTM C131 / C131M-14 (2006). “Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.”
20
[21] ASTM C150 (2012). “Standard Specification for Portland Cement.”
21
[22] ASTM C 143/C 143M-15a (2015). “Standard Test Method for Slump of Hydraulic-Cement Concrete.”
22
[23] K. Akhavan Kazemi, O. Eren, A. R. Rezaei., Some mechanical properties of normal and recycled aggregate concretes, Scientia Iranica A. 22 (6) (2015) 1972-1980.
23
[24] M. Benaicha, X. Roguiez, O. Jalbaud, Y. Burtschell, A. Hafidi Alaoui., Influence of silica fume and viscosity modifying agent on the mechanical and rheological behavior of self-compacting concrete, J. Constr. Build. Mater. 84 (2015) 103-110.
24
[25] X. Y. Lv, L. S. Wang, X. Chen, Q. Y. Li., Experimental study on the activity of concrete recycled powder, Journal of Qingdao Technological University. 30 (2009) 137-139.
25
[26] S.W. Tabsh, A.S. Abdelfatah., Influence of recycled concrete aggregates on strength properties of concrete, Constr Build Mater. 23 (2009) 1163-1167.
26
[27] F.T. Olorunsogo, N. Padayachee., Performance of recycled aggregate concrete monitored by durability indexes, Cem Concr Res. 32 (2002) 179-185.
27
[28] A. Ajdukiewicz, A. Kliszczewicz., Influence of recycled aggregates on mechanical properties of HS/HPC, Cement Concrete Compos. 24 (2002) 269-279.
28
[29] D. J. Moon, Y. B. Kim, J. S. Ryou., An approach for the recycling of waste concrete powder as cementitious materials, Journal of Ceramic Processing Research. 9(3) (2008) 278-281.
29
[30] ASTM C 496/C 496M-11 (2011). “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens.”
30
[31] Y.J. Kim, Quality properties of self-consolidating concrete mixed with waste concrete powder, Construct. Build. Mater. 135 (2017) 177-185.
31
[21] M. Mastali, A. Dalvand, Use of silica fume and recycled steel fibers in self-compacting concrete (SCC), Construction and Building Materials. 125 (2016) 196-209.
32
[33] A.M. Wagih, H.Z. El-Karmoty, M. Ebid, S.H. Okba., Recycled construction and demolition concrete waste as aggregate for structural concrete, Housing and Building National Research Center. 9 (2013) 193-200.
33
[34] ASTM C78 (2010). “Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading).”
34
[35] P. Zhu, X. Maoa, W. Qu, Z. Li, Z. Mac., Investigation of using recycled powder from waste of clay bricks and cement solids in reactive powder concrete, Construction and Building Materials. 113 (2016) 246-254.
35
[36] M. Mastali, A. Dalvand, The impact resistance and mechanical properties of fiber reinforced self-compacting concrete (SCC) containing nano-SiO2 and silica fume, Journal of Environmental and Civil Engineering. 22(1) (2018) 1-27.
36
[37] Y. Hua, Z. Tang, W. Li, Y. Li, V. W. Y. Tamd., Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates, Construction and Building Materials. 226 (2019) 139-151.
37
[38] M. Mastali, Z. Abdollahnejad, F. Pacheco-Torgal., Carbon dioxide sequestration on fly ash/waste glassalkali-based mortars with recycled aggregates: compressive strength, hydration products, carbon footprint, and cost analysis, Woodhead Publishing Series in Civil and Structural Engineering. (2018) 299-348.
38
[39] M. Mastali, A. Dalvand, A.R. Sattarifard, Z. Abdollahnejad, M. Illikainena., Characterization and optimization of hardened properties of selfconsolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers, Composites Part B. 151 (2018) 186-200.
39
[40] Ecoinvent, The Life Cycle Inventory Data Version 2.0, 2008.
40
[41] P. Van den Heede, M. Maes, E. Gruyaert, N. De Belie., Full probabilistic service life prediction and life cycle assessment of concrete with fly ash and blast-furnace slag in a submerged marine environment: a parameter study, Int J Environ Sust Dev. 11 (2012) 32-49.
41
[42] P.Van den Heede, N. De Belie., Environmental impact and life cycle assessment (LCA) of traditional and ‘green’concretes: literature review and theoretical calculations, Cement Concr. Compos. 34 (2012) 431-442.
42
[43] A. Akbar, K.M. Liew, Assessing recycling potential of carbon fiber reinforced plastic waste in production of eco-efficient cement-based materials, Journal of Cleaner Production. 274 (2020) 123001.
43
[44] A. Hajimohammadi, T. Ngo, P. Mendis, T. Nguyen, A. Kashani, J.S.J. van Deventer., Pore characteristics in one-part mix geopolymers foamed by H2O2: the impact of mix design, Mater. Des. 130 (2017) 381-391.
44
[45] F. Bayramov, C. Tasdemir, M. A. Tasdemir., Optimization of fibre reinforced concretes by means of statistical response surface method, Cement Concr Compos. 26 (2004) 665-675.
45
[46] W.F. Smith., Experimental design for formulation, American Statistical Association. (2005).
46
[47] O. Sengul, M.A. Tasdemir., Compressive strength and rapid chloride permeability of concretes with ground fly ash and slag, Mater Civ Eng. 21 (2009) 494-501.
47
[48] O. Sengul., Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires, Construct Build Mater. 122 (2016) 649-58.
48
ORIGINAL_ARTICLE
رتبهبندی دلایل دوبارهکاری در پروژههای ساختوساز ایران و بررسی اثر تکنیکهای ساختوساز ناب
دوبارهکاری یکی از مشکلات مهم در صنعت ساختوساز میباشد. با وجود مطالعات فراوانی که در حیطة دوبارهکاری در جهان صورت گرفته است، فقدان بررسی جامع عوامل ایجاد دوبارهکاری در ایران، احساس میشود. علاوه بر این، روشی کارآمد و اثرگذار برای بهبود اساسی مسائل مربوط به دوبارهکاری، نه تنها در ایران بلکه در سایر کشورها نیز مورد نیاز است. بنابراین، در این پژوهش سعی شد با استفاده از روش پیمایش از طریق پرسشنامه، عوامل اصلی ایجاد دوبارهکاری در ایران شناسایی شده و بر اساس معیارهای هزینه، زمان، کیفیت، ایمنی و رضایت تیم پروژه با روش فازی-تاپسیس رتبهبندی شوند. سپس، تکنیکهای ساختوساز ناب به عنوان راهکاری برای پیشگیری از رخداد دوبارهکاری مورد بررسی قرار گرفتند و اثرگذاری این تکنیکها بر اهمیت عوامل دوبارهکاری مورد آزمایش قرارگرفت. نتایج حاصل از 52 پرسشنامه نشان دادند که عوامل مربوط به کارفرما، فاز ساخت و فاز طراحی به ترتیب سه عاملِ اصلیِ دوبارهکاری در ایران هستند. عوامل تخصیص ناکارآمد منابع، تغییر سفارشات کارفرما، تأخیر در تأمین مالی و ارائة تحویل دادنیهای قرارداد، سطح مهارت ناکافی، و مدیریت ناکارآمد نیز به ترتیب با اهمیتترین عوامل جزئیِ دوبارهکاری میباشند. از طرفی، میزان نابسازی پروژهها از طریق سیستم نمرهدهیِ ناب و با 14 فاکتور بررسی شد. نتایج نشان دادند که با وجود اینکه تکنیکهای ناب بصورت تخصصی در پروژهها اجرا نمیشوند، برخی فاکتورهای ساختوساز ناب مورد بررسی در این پژوهش (از جمله تمرکز بر وضعیت ارتباطات و همکاری، استفاده از IT و RFI،) بصورت معناداری دوبارهکاری و اهمیت دلایل ایجاد آن را تحت تأثیر قرار میدهند.
https://ceej.aut.ac.ir/article_3225_9f2b3fd4fc659d2e2ac15af1e6e84073.pdf
2021-03-21
127
148
10.22060/ceej.2019.14975.5801
دوبارهکاری
ساخت و ساز ناب
تحویل یکپارچة پروژه
فازی-تاپسیس
تغییر سفارشات
سهیلا
معاونی
smoaveni@mail.um.ac.ir
1
گروه عمران، دانشکده مهندسی، دانشگاه فردوسی مشهد، مشهد، ایران
AUTHOR
هاشم
شریعتمدار
shariatmadar@um.ac.ir
2
گروه عمران، دانشکده مهندسی، دانشگاه فردوسی مشهد، مشهد، ایران
LEAD_AUTHOR
[1] H. Abdul-Rahman, The Cost of Non-Conformance During a Highway Project: A Case Study, Construction Management and Economics, 13(1) (1995) 23-32.
1
[2] B.-G. Hwang, S.R. Thomas, C.T. Haas, C.H. Caldas, Measuring the Impact of Rework on Construction Cost Performance, Journal of Construction Engineering and Management, 135(3) (2009) 187-198.
2
[3] P.E. Love, Influence of Project Type and Procurement Method on Rework Costs in Building Construction Projects, Journal of Construction Engineering and Management, 128(1) (2002) 18-29.
3
[4] P.E. Love, D.J. Edwards, Determinants of Rework in Building Construction Projects, Engineering, Construction and Architectural Management, 11(4) (2004) 259-274.
4
[5] P.E. Love, D.J. Edwards, H. Watson, P. Davis, Rework in Civil Infrastructure Projects: Determination of Cost Predictors, Journal of Construction Engineering and Management, 136(3) (2010) 275-282.
5
[6] G. Ye, Z. Jin, B. Xia, M. Skitmore, Analyzing Causes for Reworks in Construction Projects in China, Journal of Management in Engineering, 31(6) (2014).
6
[7] J.L. Burati Jr, J.J. Farrington, W.B. Ledbetter, Causes of Quality Deviations in Design and Construction, Journal of Construction Engineering and Management, 118(1) (1992) 34-49.
7
[8] P.-E. Josephson, Y. Hammarlund, The Causes and Costs of Defects in Construction: A Study of Seven Building Projects, Automation in Construction, 8(6) (1999) 681-687.
8
[9] P. Barber, A. Graves, M. Hall, D. Sheath, C. Tomkins, Quality Failure Costs in Civil Engineering Projects, International Journal of Quality & Reliability Management, 17(4/5) (2000) 479-492.
9
[10] J.L. Ashford, The Management of Quality in Construction, E&F Spon, London, 1992.
10
[11] Construction-Industry-Development-Agency(CIDA), Measuring up or Muddling through: Best Practice in the Australian Non-Residential Construction Industry, Sydney, Australia, 1995.
11
[12] P.E. Love, H. Li, Quantifying the Causes and Costs of Rework in Construction, Construction Management & Economics, 18(4) (2000) 479-490.
12
[13] Construction-Industry-Institute(CII), The Field Rework Index: Early Warning for Field Rework and Cost Growth, The Univ. of Texas at Austin, 2001.
13
[14] A.R. Fayek, M. Dissanayake, O. Campero, Measuring and Classifying Construction Field Rework: A Pilot Study, Department of Civil and Environmental Engineering University of Alberta, Construction Owners Association of Alberta (COAA) Field Rework Committee, 2003.
14
[15] The-Australian-Procurement-and-Construction-Council, Construct Australia: Building a Better Construction Industry in Australia, Deakin West, ACT, Australia, 1997.
15
[16] H. Abdul-Rahman, The Management and Cost of Quality for Civil Engineering Projects, Univ. of Manchester Institute of Science and Technology (UMIST), Manchester, U.K., 1993.
16
[17] G. Burroughs, Concrete Quality Assurance: The Contractors Role, Concrete Institute of Australia, Melbourne, Australia, 1993.
17
[18] P.E. Love, J. Smith, Benchmarking, Benchaction, and Benchlearning: Rework Mitigation in Projects, Journal of Management in Engineering, 19(4) (2003) 147-159.
18
[19] J. Gardiner, Management of Design Documentation: Where Do We Go from Here?, in: Proceedings of the National Construction and Management Conference, Institution of Engineers, Australia, Sydney, Australia, 1994, pp. 441.
19
[20] F.A. Stasiowski, D. Burstein, Total Quality Project Management for the Design Firm: How to Improve Quality, Increase Sales, and Reduce Costs, John Wiley & Sons, 1994.
20
[21] B. Richardson, Marketing for Architects and Engineers: A New Approach, Taylor & Francis, 2003.
21
[22] H. Li, P.E. Love, Visualization of Building Interior Design to Reduce Rework, in: Information Visualization, IEEE, 1998, pp. 187-191.
22
[23] P. Love, A. Wyatt, Communication and Rework: Case Studies of Construction Projects, CSIRO, DBCE DOC, 97 (1997) 38.
23
[24] D. Walker, Investigation into Factors that Determine Building Construction Time Performance, Royal Melbourne University of Technology, Melbourne, Australia., 1994.
24
[25] C.T. Jahren, A.M. Ashe, Predictors of Cost-Overrun Rates, Journal of Construction Engineering and Management, 116(3) (1990) 548-552.
25
[26] N. Forcada, A.P. Alvarez, P.E. Love, D.J. Edwards, Rework in Urban Renewal Projects in Colombia, Journal of Infrastructure Systems, 23(2) (2016) 04016034.
26
[27] H. Katayama, D. Bennett, Lean Production in a Changing Competitive World: A Japanese Perspective, International Journal of Operations & Production Management, 16(2) (1996) 8-23.
27
[28] J.P. Womack, D.T. Jones, Lean Thinking—Banish Waste and Create Wealth in Your Corporation, Simon and Schuster, 1996.
28
[29] T. Ohno, Toyota Production System: Beyond Large-Scale Production, crc Press, 1988.
29
[30] C.M. Eastman, C. Eastman, P. Teicholz, R. Sacks, BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors, John Wiley & Sons, 2011.
30
[31] L. Koskela, Application of the New Production Philosophy to Construction, Stanford university Stanford, CA, 1992.
31
[32] L. Koskela, An Exploration Towards a Production Theory and Its Application to Construction, VTT Technical Research Centre of Finland, 2000.
32
[33] L. Koskela, G. Howell, The Theory of Project Management: Explanation to Novel Methods, in: Proceedings IGLC, 2002, pp. 1-11.
33
[34] Construction-Industry-Institute(CII), Lean Principles in Construction Project Team, in, www.construction-institute.org, 2018-March.
34
[35] Lean-Construction-Institute(LCI), in, https://www.leanconstruction.org/, 2018-March.
35
[36] M.E. Hassan, Assessing the Impact of Lean/Integrated Project Delivery System on Final Project Success, George Mason University, 2013.
36
[37] O. Salem, J. Solomon, A. Genaidy, I. Minkarah, Lean construction: From theory to implementation, Journal of management in engineering, 22(4) (2006) 168-175.
37
[38] I. Nahmens, L.H. Ikuma, D. Khot, Kaizen and Job Satisfaction-A Case Study in Industrialized Homebuilding, Lean Construction Journal, (2012).
38
[39] D. Kung, D.P. Alex, M. Al-Hussein, S. Fernando, Application of lean thinking to improve the productivity of water and sewer service installations, Canadian journal of civil engineering, 35(4) (2008) 418-430.
39
[40] J.E. Diekmann, M. Krewedl, J. Balonick, T. Stewart, S. Won, Application of lean manufacturing principles to construction, Boulder, CO, Construction Industry Institute, 191 (2004).
40
[41] S. Cho, G. Ballard, Last Planner and Integrated Project Delivery, Lean Construction Journal, (2011).
41
[42] G. Ballard, The last planner system of production control, University of Birmingham, 2000.
42
[43] D. Leonard, Building quality at veridian homes, Quality progress, 39(10) (2006) 49.
43
[44] G. Ballard, Lean Project Delivery System, White Paper No. 8, Lean Construction Institute, California., (2000).
44
[45] O. Matthews, G.A. Howell, Integrated Project Delivery an Example of Relational Contracting, Lean Construction Journal, 2(1) (2005) 46-61.
45
[46] M. Kenig, M. Allison, B. Black, L. Burdi, C. Colella, H. Davis, M. Williams, Integrated Project Delivery for Public and Private Owners, National Association of State Facilities Administrators (NASFA), Construction Owners Association of America (COAA), The Association of Higher Education Facilities Officers (APPA), Associated General Contractors of America (AGC) and American Institute of Architects (AIA), 2010.
46
[47] C. Thomsen, J. Darrington, D. Dunne, W. Lichtig, Managing Integrated Project Delivery, Construction Management Association of America (CMAA), McLean, VA, 105 (2009).
47
[48] J.C. Cheng, J. Won, M. Das, Construction and Demolition Waste Management Using BIM Technology, in: International Group for Lean Construction Conference (IGLC), Perth, Australia, 2015.
48
[49] M. Shahparvari, D. Fong, The Review of Rework Causes and Costs in Housing Construction Supply Chain, in: 26th Annual Conference of the International Group for Lean Construction, Chennai, India, 2018, pp. 1375-1384.
49
[50] C.-T. Chen, Extensions of the TOPSIS for Group Decision-Making under Fuzzy Environment, Fuzzy sets and systems, 114(1) (2000) 1-9.
50
[51] M.J. Salganik, D.D. Heckathorn, Sampling and Estimation in Hidden Populations Using Respondent‐Driven Sampling, Sociological Methodology, 34(1) (2004) 193-240.
51
[52] E. Naderi, M. Seifnaraghi, Research Methods and How to Evaluate It in the Humanities, Badr Press, 1375. in Persian.
52
[53] P.L. Alreck, R.B. Settle, The Survey Research Handbook, McGraw-Hill, 1994.
53
[54] S.A. Afshani, Z. Hoseiniramshe, M. Nurian, M. Mahdavizafarghandi, SPSS20 Application Reference, Bishe Press, 1393. in Persian.
54
[55] L.J. Cronbach, Coefficient Alpha and the Internal Structure of Tests, Psychometrika, 16(3) (1951) 297-334.
55
[56] A. Oppenheim, Questionnaire Design, Interviewing and Attitude Measurement, London, 1992.
56
[57] M. Sabzehparvar, Project Management and Control, Terme Press, 1393. in Persian.
57
[58] P.E. Love, P. Teo, F. Ackermann, J. Smith, J. Alexander, E. Palaneeswaran, J. Morrison, Reduce Rework, Improve Safety: An Empirical Inquiry into the Precursors to Error in Construction, Production Planning & Control, 29(5) (2018) 353-366.
58
[59] R. Mendelsohn, The Constructibility Review Process: A Constructor's Perspective, Journal of Management in Engineering, 13(3) (1997) 17-19.
59
[60] J.K. Wong, J.X. Zhou, A.P. Chan, Exploring The Linkages Between The Adoption Of BIM And Design Error Reduction, Building Information Systems in the Construction Industry, (2018) 113.
60
[61] M.H. Thyssen, S. Emmitt, S. Bonke, A. Kirk-Christoffersen, Facilitating Client Value Creation in the Conceptual Design Phase of Construction Projects: A Workshop Approach, Architectural Engineering and Design Management, 6(1) (2010) 18-30.
61
[62] B.-G. Hwang, X. Zhao, K.J. Goh, Investigating the Client-Related Rework in Building Projects: The Case of Singapore, International Journal of Project Management, 32(4) (2014) 698-708.
62
[63] A.C. Sidwell, A Critical Study of Project Team Organisational Forms within the Building Process, Aston University, 1982.
63
[64] M.D. Martínez-Aires, M. López-Alonso, M. Martínez-Rojas, Building Information Modeling and Safety Management: A Systematic Review, Safety Science, 101(2018) (2018) 11-18.
64
[65] A. Mossman, What is Lean Project Delivery, The Change Business Ldt. UK, 2008.
65
ORIGINAL_ARTICLE
مطالعه آزمایشگاهی راهکارهای اصلاحی جهت کاهش اثر تورم خاک بر لاینینگ بتنی کانالهای انتقال آب
آسیب دیدگی پوشش بتنی کانالهای انتقال آب یکی از مشکلات رایج در پروژه های شبکههای آبیاری و زهکشی میباشد. بررسیهای انجام شده حاکی از این واقعیت میباشد که تورم خاکهای رسی غیراشباع واقع در بستر کانالها علت اصلی این آسیبها میباشد. در مقاله حاضر به مدلسازی فیزیکی این پدیده جهت بررسی رفتار اندرکنشی رویه بتنی و خاک بستر به منظور ارائه روشهای اجرایی برای کاهش آسیبها پرداخته شده است. در مدلسازیهای انجام شده دو راهکار برای کاهش اثر تورم بر روی رویه بررسی شده است: بهینه کردن تعداد و آرایش درزها و اثر شیب دیواره بر رفتار اندرکنشی خاک و رویه. بدین منظور مشخصات هندسی کانال انتقال آب دشت تبریز به عنوان مبنا انتخاب گردیده و از مقیاس 1:10 در مدلسازیها استفاده شده است. در آزمایشات انجام شده از دو روش سرعتسنجی تصویری (PIV) و سیستم ابزار دقیق برای ارزیابی رفتار استفاده گردیده است. به کمک نتایج حاصله از آزمایشات، بردارها، کنتورهای جابهجایی و همچنین کرنشهای حجمی رسم گردیده است. از طرفی نتایج مربوط به قرائت کرنشسنجها، توزیع لنگر خمشی ایجاد شده در طول رویه در اثر فشار تورم را نشان میدهد. بر اساس نتایج با قرار دادن ردیف درزها در محلهای مناسب در مقطع کانال که شامل محل تمرکز جابهجاییها میباشد، میتوان به نحو بسیار چشمگیری از جابهجایی نسبی پانلها ممانعت کرده و لنگرهای مخرب ایجاد شده در رویه را کاهش داد. همچنین نتایج نشان میدهند که تغییر شیب دیواره کانال نمیتواند به عنوان راهکار مؤثر در کنترل آسیب دیدگی رویه ها مطرح باشد.
https://ceej.aut.ac.ir/article_3174_b0e83cdc5c044eef646169a11e0b80a2.pdf
2021-03-21
149
170
10.22060/ceej.2018.14816.5751
مدلسازی فیزیکی
کانال
رویه بتنی
تورم
درز
فریبا
بهروزسرند
sarand@iaut.ac.ir
1
استادیار-گروه عمران- دانشکده فنی- دانشگاه آزاد اسلامی تبریز
LEAD_AUTHOR
مسعود
حاجی علیلوی بناب
hajialilue@tabrizu.ac.ir
2
استاد، دانشکده عمران، دانشگاه تبریز، تبریز، ایران
AUTHOR
F.H.Chen, “Foundations on Expansive Soils”, Elsevier Scientific Publishing Co., Amsterdam, (1988).
1
L.D.Johnson and D.R.Snethen, “Prediction of potential heave of swelling soil”, Geotechnical Testing Journal, Vol. 1, No. 3, (1978), pp.117–124.
2
R.S.Sharma, “Constitutive modeling of unsaturated soils: stress variables and strain increment parameters”, Proceedings, 10th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG), Tucson, Arizona. A.A. Balkema, Vol. 1, (2001), pp. 395–400.
3
W.G.Holtz and H.J.Gibbs, “Engineering properties of expansive clays”, Transactions, ASCE, Vol. 121, (1956), pp. 641–677.
4
A.S.Rao, B.R.Phanikumar and R.S.Sharma, “Prediction of swelling characteristics of remoulded and compacted expansive soils using free swell index”, The Quarterly Journal of Engineering Geology and Hydrogeology, Vol. 37, No. 3, (2004), pp. 217–226.
5
W.M.Schafer, M.J. Singer, “Influence of physical and mineralogical properties on swellingof soils in Yolo County, California”, Soil Science Society of America Journal 40, (1976), pp.557–562.
6
J.C.Parker, D.F.Amos and L.W. Zelazny, “Water adsorption and swelling of clay minerals insoil systems”, Soil Science Society of America Journal 46, (1982), pp.450–456.
7
A.J.Puppala, B.Katha and L.R. Hoyos, “Volumetric shrinkage strain measurements in expansive soils using digital imaging technology”, Geotech Testing Journal, ASTM, Vol. 27(2004), No. 6
8
H.Rahimi, N. Abbasi, “Failure of concrete canal lining on fine sandy soils: a case study for the saveh project”, Irrigation and Drainage, John Wiley & Sons, Ltd., 57(2008), pp.83-92.
9
10. FG.Bell, “Stabilization and treatment of clay soils with lime”, Part – 1: basic principles. Ground engineering, 21(2), (1988), pp.10–15.
10
11. J.D.Nelson, D.J Miller, “Expansive Soils – Problems and Practice in Foundation and Pavement Engineering”, John Wiley and Sons. (1992), USA.
11
12. A. Seco, F. Ramírez, L. Miqueleiz, B. García, “Stabilization of expansive soils for use in construction”, Applied Clay Science, 51 (2011) 348–352.
12
13. C. Urena, J.M. Azanon, F. Corpas, F. Nieto d, C. Leon, L. Pérez, “Magnesium hydroxide, seawater and olive mill wastewater to reduce swelling potential and plasticity of bentonite soil”, Construction and Building Materials, 45(2013) 289–297.
13
14. Dina A. Emarah, Safwat A. Seleem, “Swelling soils treatment using lime and sea water for roads construction”, Alexandria Engineering Journal, (2017) Article in press.
14
15. D.E.Sheeran, R.J.Krizek, “Preparation of homogeneous soil samples by slurry consolidation”, Journal of Materials, 6 (2): (1971) pp. 356–373.
15
16. R.J. Mair, “Centrifugal modelling of tunnel construction in soft clay”, Ph.D Thesis, (1979) Cambridge University, UK.
16
17. C.M.Martin, “Physical and numerical modelling of offshore foundation under combined loads”, Ph.D.Thesis, (1994), Oxford University, UK.
17
18. S.H.Kim, “Interaction between closely spaced tunnels in clay”, Ph.DThesis, (1996), Oxford University, UK.
18
19. D.N.Chapman, A.H.C.Chan and D.V.L.Hunt, “Model tests for investigating ground movements caused by multiple tunnelling in soft ground”. In proceedings of the 6th conferece on Physical Modelling in Geotechnics, London, Taylor& Francis Group, (2006), pp.1133-1137.
19
20. W.A. Take, “The influence of seasonal moisture cycles on clay slopes”, Ph.D Thesis, (2003), University of Cambridge, UK.
20
21. D.J.White, W.A. Take, W.A. and M.D. Bolton, “Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry”, Geotechnique 53, No.7, (2003) pp.619-63.
21
ORIGINAL_ARTICLE
بهرهگیری از تابع شکل سینوسی در تحلیل پلهای بتنی سه دهانه پیوسته در جهت عرضی
با توجه به اهمیت پلهای سه دهانه و پیچیدگیهای تحلیل سازههای چند درجه آزادی به روش دستی، بکارگیری روشهای دقیق عددی در تخمین نیروهای این گروه از پلها بسیار حائز اهمیت میباشد. در این مطالعه روشی تحلیلی معرفی خواهد شد که برای ارزیابی پلهای سه دهانه پیوسته با پایههای جداسازی نشده و عرشه با مقطع ثابت و گشتاور ماند نسبتاً بالا در جهت عرضی میتواند کارآمد باشد. روش معرفی شده در این مطالعه براساس به کارگیری تابع شکل سینوسی برای تغییرشکل عرشه پل و همچنین نیروهای وارده متناظر با آن تغییرشکل خواهد بود. این روش با فرض مدل ساده تیر بر روی تکیه گاههای الاستیک میسر شده است و با تشکیل و به حداقل رساندن تابع پتانسیل ناشی از کلیه پارامترهای محرک و مقاوم در شکلگیری تغییرشکل، ایجاد شده است. با توجه به اینکه روش پیشنهادی آشتو در محاسبه نیروهای پلها با بیش از دو دهانه روشی سهبعدی و نیازمند به کارگیری نرمافزارهای خاص در این رابطه میباشد، طرح روش دستی مناسب و دقیق برای ارزیابی نیروهای عرضی پلهای سه دهانه میتواند ایده مقایسهای بسیار مناسبی محسوب گردد. در نظر گرفتن 5 نمونه حالت مختلف برای یک نمونه مثال و تحلیل آنها، و بدست آوردن نتایج حاصل از روش پیشنهادی با اختلاف کمتر از 10% نسبت به روش دقیق، نشان از دقت بالای روش پیشنهادی و کارآمدی آن در کنترل محاسبات برای گروه پلهای مذکور خواهد بود.
https://ceej.aut.ac.ir/article_3102_bdaa910b22090f78fc7316501372f2ea.pdf
2021-03-21
171
184
10.22060/ceej.2018.14637.5702
انرژی درونی سازه
نیروهای برشی عرضی
تابع شکل سینوسی
تابع پتانسیل
مود اول تغییرشکل
فرشاد
غفاری
dr.ghaffari.f@gmail.com
1
دانشجوی دکترای سازه دانشگاه قم
LEAD_AUTHOR
محمد
قاسم وتر
2
استادیار، دپارتمان پژوهشکاه بین اللمللی زلزله و زلزله شناسی، تهران، ایران
AUTHOR
محمد رضا
عدل پرور
mr.adlparvar@gmail.com
3
دانشیار، دپارتمان مهندسی عمران-سازه، دانشگاه قم، قم، ایران
AUTHOR
1. AASHTO, 2012 AASHTO LRFD Bridge Design Specifications, Customary U.S. Units (6th Edition), American Association of State Highway and Transportation Officials, 4th Edition, Washington, D.C.
1
2. Barker, R. M. & Puckett, J. A. 2013 Design of Highway Bridges: A LRFD Approach, 3rd Edition, John Wiley & Sons, Inc., New York, NY.
2
3. Clough, R.W. & Penzein, J. 1993 Dynamics of Structures, McGraw Hill, New York.
3
4. Chopra AK, Chopra AK. Dynamics of structures: theory and applications to earthquake engineering. Upper Saddle River, NJ: Pearson/Prentice Hall; 2007 May 1.
4
5. chen, W.F. & Lui, E.M. 1987 Structural Stability, Elsevier, New York.
5
6. Caltrans, 2014a California Amendments to AASHTO LRFD Bridge Design Specifications – 6th Edition, California Department of Transportation, Sacramento, CA.
6
7. Najm H, Vasconez R. Assessment of AASHTO LRFD guidelines for analysis of regular bridges subjected to transverse earthquake ground motions. Bridge Structures. 2015 Jan 1; 11(1, 2):3-18.
7
8. Calvi GM. Recent experience and innovative approaches in design and assessment of bridges. Proceedings of 13th World Conference on Earthquake Engineering, Vancouver, Canada, 2004.
8
9. Tubaldi E, Barbato M, Dall’Asta A. Transverse seismic response of continuous steel-concrete composite bridges exhibiting dual load path. Earthquake and Structures 2010; 1(1):21–41.
9
10. Tsai MH. Transverse earthquake response analysis of a seismically isolated regular bridge with partial restraint.Engineering Structures 2008; 30(2):393–403.
10
11. Makris N, Kampas G, Angelopoulou D. The eigenvalues of isolated bridges with transverse restraints at the end-abutments. Earthquake Engineering and Structural Dynamics 2010; 39(8):869–886.
11
12. Tubaldi E, Dall'Asta A. Transverse free vibrations of continuous bridges with abutment restraint. Earthquake Engineering & Structural Dynamics. 2012 Jul 25; 41(9):1319-40.
12
13. Buckle, I.G., Mayes, R.L. & Button, M.R., 1987 Seismic design and retrofit manual for highway bridge, Report No. FHWA-IP-6, Final Report, National Technical Information Service, Springfield, Verginia. 130-136.
13
ORIGINAL_ARTICLE
بررسی عددی و آزمایشگاهی تأثیر المانهای گوهای شکل بر پارامترهای هیدرولیکی و استهلاک انرژی روی سرریز پلکانی در جریان رویهای
سرریز پلکانی یک طرح هیدرولیکی مقرون بصرفه جهت مستهلک نمودن انرژی جریان آب عبوری از روی سرریز است. بدلیل وجود برخی محدودیتها در سرریزهای پلکانی، در این تحقیق برای افزایش و بهبود اثربخشی استهلاک انرژی طرحی در نظر گرفته شده است. بدین منظور تأثیر وجود المانهای گوهای شکل بر تغییرات سرعت و فشار روی پله، ارتفاع آب پاییندست سرریز و در نتیجه استهلاک انرژی روی سرریز پلکانی مورد بررسی قرار گرفته است. در این راستا ابتدا با استفاده از مدل عددی Flow-3D چندین شکل از المانهای گوهای شکل با تغییر در چیدمان گوهها و تغییر در میزان دبی مورد بررسی قرار گرفته و مدل مناسب از جنبه بیشترین استهلاک انرژی در آزمایشگاه ساخته و مورد مطالعه قرار گرفته است. در آزمایشگاه 25 آزمایش بر روی 5 مدل فیزیکی، با تغییر در چیدمان گوهها و دبیهای متفاوت انجام گردید و با سرریز پلکانی ساده (بدون المان گوهای) مورد مقایسه قرار گرفت. نتایج عددی و آزمایشگاهی نشان میدهد که افزودن المانهای گوهای بر روی سرریز پلکانی موجب کاهش سرعت و کاهش ارتفاع آب در پایین دست سرریز به ترتیب تا حدود 80% و 30% و استهلاک انرژی روی سرریز پلکانی تا حدود 7/2 برابر افزایش یافته است. با ترسیم پروفیلهای توزیع فشار در لبه قائم پله و روی کف پله ملاحظه شد که فشار منفی روی کف پله به فشار مثبت تبدیل شده و فشار منفی در مقطع قائم تا حدود 96% کاهش و فشار مثبت در مقطع قائم تا حدود 2 برابر افزایش مییابد. همچنین با افزایش تراکم المانها نتایجی که موجب افزایش استهلاک انرژی میشود چشمگیرتر است.
https://ceej.aut.ac.ir/article_3016_87677d3ca96f563aa7a4288586de7931.pdf
2021-03-21
185
200
10.22060/ceej.2018.14587.5689
سرریز پلکانی
المانهای گوهای
تغییرات سرعت و فشار
استهلاک انرژی
Flow-3D
کیومرث
روشنگر
kroshangar@yahoo.com
1
گروه مهندسی آب، دانشگاه تبریز، ایران
LEAD_AUTHOR
سمیرا
اخگر
samira.akhgar66@yahoo.com
2
گروه مهندسی آّب، دانشکده فنی مهندسی عمران، دانشگاه تبریز، تبریز
AUTHOR
[1] N. RAJARATNAM. Skimming flow in stepped spillways. Journal of Hydraulic Engineering, 116.1990, 587-591.
1
[2] H. CHANSON. Comparison of energy dissipation between nappe and skimming flow regimes on stepped chutes. Journal of hydraulic research, 32.1994, 213-218.
2
[3] M. R. CHAMANI & N. RAJARATNAM. Jet flow on stepped spillways. Journal of Hydraulic Engineering, 120.1994, 254-259.
3
[4] J.A. KELLS. Comparison of energy dissipation between nappe and skimming flow regimes on stepped chutes discussion. IAHR Journal of Hydraulic Research 33.1995, 128-133.
4
[5] M. TABBARA, J. CHATILA & R. AWWAD. Computational simulation of flow over stepped spillways. Computers & structures, 83.2005, 2215-2224 .
5
[6] M. AZHDARY MOGHADDAM 1997. The hydraulics of flow on stepped ogee-profile spillways, University of Ottawa (Canada).
6
[7] A. KABIRI-SAMANI & M. R. NAZARZADEH. Evaluation of the principles governing on hydraulic flow and design of the stepped spillway. Journal of Technical School, 38.2004, 339-347(in Persian).
7
[8] M. S´ NCHEZ-JUNY, E. BLADE & J. DOLZ. Pressures on a stepped spillway. Journal of Hydraulic Research, 45.2007, 505-511.
8
[9] R. M. BOES & W. H. HAGER. Two-phase flow characteristics of stepped spillways. Journal of Hydraulic Engineering, 129.2003, 661-670.
9
[10] F. SALMASI. Hydraulic of nappe Flow regime over stepped spillway. Journal of Shahid Chamran University of Ahvaz, 2004, 32-56 (in persion).
10
[11] I. N. RAD & M. TEIMOURI. An investigation of flow energy dissipation in simple stepped spillways by numerical model. European Journal of Scientific Research, 47.2010
11
[12] N. SOURI & A. MOJTAHEDI. 2014. Investigation of the flow pattern on stepped spillway using numerical study and physical model. Tabriz University (in Persian).
12
[13] S. RAZI, F. SALMASI & A. H. DALIR. Laboratory Study of the Effects of Step Number, Slope and Particle Size on Energy Dissipation in Gabion Stepped Spillways. Amir Kabir Civil Engineering Journal, 2018.
13
ORIGINAL_ARTICLE
بررسی تأثیر اولویتدهی فعال غیرمشروط به حملونقل همگانی در زمانبندی چراغ راهنمایی با شبیه سازی
گرایش مسافران به حملونقل عمومی می تواند باعث کاهش استفاده از خودرو در شهرها شود و کاهش ترافیک، کاهش مصرف سوخت و کاهش آلودگی هوا را به دنبال داشته باشد. اولویتدهی به حملونقل همگانی در تقاطع های چراغدار شلوغ به کاهش تأخیر ناشی از ترافیک و برخورد با چراغ قرمز در این تقاطعها کمک می کند و باعث افزایش اطمینان پذیری این سامانه می شود. در این مقاله، روشی برای اولویت دهی فعال به حملونقل همگانی در یک تقاطع شامل اتوبوس های عادی و خط ویژه اتوبوس های تندرو (BRT) ارائه شده است. اهداف مورد توجه شامل کاهش تأخیر مسافران اتوبوس، افزایش قابلیت اعتماد سامانه حملونقل همگانی و کاهش تأثیر منفی بر خودروهای شخصی است. امکان اجرای TSP در یک تقاطع برای هر رویکرد در هر لحظه، بر اساس میزان تأخیر مسافران اتوبوس عبورکننده از تقاطع تعیین شد و با استفاده از ضرایب جداگانه برای وزندهی به اتوبوسهای عادی، اتوبوسهای تندرو و خودروهای شخصی، تأثیر حضور اتوبوس و حجم تردد خودرو در هر رویکرد بصورت کمّی در نظر گرفته شد. برای افزایش مزایای مسافرین، یازده حالت مختلف از رسیدن اتوبوس به تقاطع بررسی شد. با نوشتن الگوریتم متناسب، تقاطع سهروردی در شهر اصفهان در نرمافزار VISSIM شبیه سازی شد. نتایج نشان میدهد تأخیر مسافران سامانه تندرو حدود 65 درصد و مسافران اتوبوس عادی حدود 7 درصد کاهش یافته است. همچنین زمان سفر اتوبوس تندرو در این تقاطع 37 درصد و این مقدار برای اتوبوس عادی 11 درصد کاهش می یابد.
https://ceej.aut.ac.ir/article_3460_65659d7f41e75c77ec700ccaa0857b56.pdf
2021-03-21
201
212
10.22060/ceej.2019.14571.5687
VISSIM
TSP
حملونقل همگانی
سامانه اتوبوس تندرو
شبیهسازی
علیرضا
غفاری
a.r.ghafari.f@gmail.com
1
دانشگاه صنعتی اصفهان،اصفهان،ایران
AUTHOR
میثم
اکبرزاده
makbarzadeh@cc.iut.ac.ir
2
دانشکده مهندسی حمل و نقل، دانشگاه صنعتی اصفهان، اصفهان، ایران
LEAD_AUTHOR
[1] Y. Lin, X. Yang, N. Zou, M. Franz, Transit signal priority control at signalized intersections: a comprehensive review, Transportation letters, 7(3) (2015) 168-180.
1
[2] F. Dion, H. Rakha, Y. Zhang, Evaluation of potential transit signal priority benefits along a fixed-time signalized arterial, Journal of transportation engineering, 130(3) (2004) 294-303.
2
[3] Y. Ji, B. Hu, J. Han, D. Tang, An improved algebraic method for transit signal priority scheme and its impact on traffic emission, Mathematical Problems in Engineering, 2014 (2014).
3
[4] V. Ngan, T. Sayed, A. Abdelfatah, Impacts of various parameters on transit signal priority effectiveness, Journal of Public Transportation, 7(3) (2004) 4.
4
[5] L. Zhou, Y. Wang, Y. Liu, Active signal priority control method for bus rapid transit based on Vehicle Infrastructure Integration, International Journal of Transportation Science and Technology, 6(2) (2017) 99-109.
5
[6] W. Smith, W. Airbrake, Study of evolutionary urban transportation, US Department of Housing and Urban Development, 1 (1968).
6
[7] L. Head, D. Gettman, Z. Wei, Decision model for priority control of traffic signals, Transportation Research Record: Journal of the Transportation Research Board, (1978) (2006) 169-177.
7
[8] J. Ding, M. Yang, W. Wang, C. Xu, Y. Bao, Strategy for multiobjective transit signal priority with prediction of bus dwell time at stops, Transportation Research Record: Journal of the Transportation Research Board, (2488) (2015) 10-19.
8
[9] R. Li, C. Zheng, W. Li, Optimization Model of Transit Signal Priority Control for Intersection and Downstream Bus Stop, Mathematical Problems in Engineering, 2016 (2016).
9
[10] E. Christofa, I. Papamichail, A. Skabardonis, Person-based traffic responsive signal control optimization, IEEE Transactions on Intelligent Transportation Systems, 14(3) (2013) 1278-1289.
10
[11] J. Hu, B.B. Park, Y.-J. Lee, Coordinated transit signal priority supporting transit progression under connected vehicle technology, Transportation Research Part C: Emerging Technologies, 55 (2015) 393-408.
11
[12] E. Christofa, K. Ampountolas, A. Skabardonis, Arterial traffic signal optimization: A person-based approach, Transportation Research Part C: Emerging Technologies, 66 (2016) 27-47.
12
[13] Y. Wadjas, P. Furth, Transit signal priority along arterials using advanced detection, Transportation Research Record: Journal of the Transportation Research Board, (1856) (2003) 220-230.
13
ORIGINAL_ARTICLE
حذف کبالت از آب آلوده با استفاده از نانوذرات مغناطیسی اکسید آهن
در تحقیق حاضر به بررسی حذف فلزات سنگین (به صورت موردی حذف کبالت) از آب آلوده با استفاده از نانوذرات مغناطیسی Fe3O4 و بررسی تأثیر فاکتورهای pH، زمان ماند، غلظت اولیه کبالت و دما بر روی حذف کبالت پرداخته شده و برای توصیف دادههای حاصل از آزمایشات جذب از ایزوترمهای تعادلی لانگمویر و فروندلیچ استفاده شده است. آزمایشها با روش تاگوچی در نرمافزار کوآلیتک که از روش فاکتوریل جزئی استفاده میکند، طراحی گردید. نانوذرات با روش همرسوبی در آزمایشگاه سنتز شده و سپس آزمایشها برای چهار سطح از هر فاکتور بر روی محلول شبیهسازی شده حاوی کبالت انجام میگردد و نتایج با کمک نرمافزار کوآلیتک به روش تحلیل استاندارد تاگوچی مورد آنالیز قرار گرفته میشوند. بالاترین میزان جذب کبالت برابر با 81 درصد، در حالت pH برابر با 9، زمان ماند 15 دقیقه، غلظت اولیه کبالت برابر با 7 میلیگرم بر لیتر و دمای °C 60 میباشد. همچنین با توجه به تحلیل، شرایط بهینه در حالت pH برابر با 9، زمان ماند 10 دقیقه، غلظت اولیه کبالت برابر با 25 میلیگرم بر لیتر و دمای °C 20 میباشد. میزان بازدهی در جذب کبالت 383/86 درصد پیشبینی میشود. در انتها نتیجه آزمایش در شرایط بهینه بر روی پساب صنعتی واقعی حاوی 36 میلیگرم بر لیتر کبالت 60 با درصد جذب 6/71 همراه میباشد که با توجه به تغییر در شرایط آزمایشگاهی و واقعی دارای اختلاف 11/17 درصدی میباشد. دادههای حاصل از بررسی ایزوترهای جذب با دو مدل فوق مطابقت داشته و برازش بیشتری نسبت به مدل فروندلیچ دارد.
https://ceej.aut.ac.ir/article_3300_b4bad03bd79e3568273c599a4b5303f1.pdf
2021-03-21
213
228
10.22060/ceej.2019.14480.5667
پساب صنعتی
حذف کبالت
نانوذرات مغناطیسی اکسید آهن
میزان جذب
نرمافزار کوآلیتک
سمیه
رحمانی
somayeh66_2006@yahoo.com
1
موسسه آمزش عالی خاوران
AUTHOR
بردیا
بهشتی
bardiabeheshti@yahoo.com
2
دانشگاه بیرجند، بیرجند، ایران
AUTHOR
محمدرضا
دوستی
mdoosti@birjand.ac.ir
3
دانشیار دانشکده مهندسی، گروه عمران-محیط زیست دانشگاه بیرجند
LEAD_AUTHOR
[1] S. Rahmani, E. Alamatian, Management of wastewater and its application in combating the effects of drought, 1 ed., Green Ryan Gostar, Tehran, 2017.
1
[2] M.m. tehrani, Removal of toxic heavy metals: Natural products as bioavailable, Two Feyz Newspaper, 16 (2013).
2
[3] M. Adeli, Y. Yamini, M. Faraji, Removal of copper, nickel and zinc by sodium dodecyl sulphate coated magnetite nanoparticles from water and wastewater samples, Arabian Journal of Chemistry, 10 (2017) 514-521.
3
[4] M.E. Mahmoud, S.B. Ahmed, M.M. Osman, T.M. Abdel-Fattah, A novel composite of nanomagnetite-immobilized-baker’s yeast on the surface of activated carbon for magnetic solid phase extraction of Hg(II),, fuel, 139 (2015) 614-621.
4
[5] A. Akbari, F. Mohamadzadeh, New Method of Synthesis of Stable Zero Valent Iron Nanoparticles (Nzvi) by Chelating Agent Diethylene Triamine Penta Acetic Acid (DTPA) and Removal of Radioactive Uranium From Ground Water by using Iron Nanoparticle, J. Nanostruct., 2 (2012) 175-181.
5
[6] M. Fischer, Interaction of water with (silico)aluminophosphate zeotypes: a comparative investigation using dispersion-corrected DFT, Phys. Chem. Chem. Phys, 18 (2016) 15738-15750.
6
[7] M.E. Mahmoud, M.S. Abdelwahab, A.E.H. Abdou, Enhanced removal of lead and cadmium from water by Fe3O4-cross linked-O-phenylenediamine nano-composite, Separ.Sci.Technol, 51 (2016) 237-247.
7
[8] A.Z. Badruddoza, Z.B. Shawon, W.J. Tay, K. Hidajat, M.S. Uddin, Fe 3 O 4/cyclodextrin polymer nanocomposites for selective heavy metals removal from industrial wastewater, Carbohydrate polymers, 91(1) (2013) 322-332.
8
[9] X. Jian, B. Wu, Y. Wei, S.X. Dou, X. Wang, W. He, N. Mahmood, Facile Synthesis of Fe3O4/GCs Composites and Their Enhanced Microwave Absorption Properties., ACS applied materials & interfaces, 8(9) (2016) 6101-6109.
9
[10] b. pan, h. qiu, b. pan, g. nie, l. xiao, l. lv, w. zhang, q. zhang, s. zheng, Highly efficient removal of heavy metals by polymer-supported nanosized hydrated Fe (III) oxides: behavior and XPS study, Water research, 44 (2010) 815-824.
10
[11] Y. Li, J. Li, Y. Zhang, Mechanism insights into enhanced Cr (VI) removal using nanoscale zerovalent iron supported on the pillared bentonite by macroscopic and spectroscopic studies, Journal of Hazardous materials, 227 (2012) 211-218.
11
[12] H. Narayani, R. Augustine, S. Sumi, M. Jose, K.D. Nair, M. Samsuddin, H. Prakash, S. Shukla, Removal of basic and industrial azo reactive dyes from aqueous solutions via Fenton-like reactions using catalytic non-magnetic Pd-flyash and magnetic Pd-Fe3O4-flyash composite particles, Separation and Purification Technology 172 (2017) 338-349.
12
[13] A. Hassani, G. Çelikdag, P. Eghbali, M. Sevim, S. Karaca, Ö. Metin, Heterogeneous sono-Fenton-like process using magnetic cobalt ferritereduced graphene oxide (CoFe2O4-rGO) nanocomposite for the removal of organic dyes from aqueous solution, Manuscript, 4177(17) (2017) 30380-30424.
13
[14] Y.L. Pang, S. Lim, H.C. Ong, W.T. Chong, Research progress on iron oxide-based magnetic materials: Synthesis techniques and photocatalytic applications, Manuscript, 8842(15) (2015) 1670-1683.
14
[15] Y. Ren, H. Abbood, F. He, H. Peng, K. Huang, Magnetic EDTA-modified chitosan/SiO2/Fe3O4 adsorbent: Preparation, characterization, and application in heavy metal adsorption, Chem Eng J, 226 (2013) 300-311.
15
[16] J. Shi, H. Li, H. Lu, X. Zhao, Use of Carboxyl Functional Magnetite Nanoparticles as Potential Sorbents for the Removal of Heavy Metal Ions from Aqueous Solution, Chemical Engineering Journal, 60(7) (2015) 2035-2041.
16
[17] A.Z.M. Badruddoza, Z.B.Z. Shawon, M. TaifurRahman, K.W. Hao, K. Hidajat, M.S. Uddin, Ionically modified magnetic nanomaterials for arsenic and chromium removal from water, Chemical Engineering Journal, 225 (2013) 607-615.
17
[18] L.P. Lingamdinne, Y.Y. Chang, J.K. Yang, J. Singh, E.H. Choi, M. Shiratani, J.R. Koduru, P. Attri, Biogenic reductive preparation of magnetic inverse spinel iron oxide nanoparticles for the adsorption removal of heavy metals, Chemical Engineering Journal, 307 (2017) 74-84.
18
[19] S. GHAFOOR, S. ATA, SYNTHESIS OF CARBOXYL-MODIFIED Fe3O4@SiO2 NANOPARTICLES AND THEIR UTILIZATION FOR THE REMEDIATION OF CADMIUM AND NICKEL FROM AQUEOUS SOLUTION, J. Chil. Chem. Soc, 62 (2017).
19
[20] M.E. Mahmoud, E.A. Saad, M.A. Soliman, M.S. Abdelwahab, Encapsulation of Nano Zerovalent Iron with Ethylenediamine and Diethylenetriamine for Removing Cobalt and Zinc and their Radionuclides from Water, Manuscript, 3437(17) (2017) 30482-30487.
20
[21] R.R. Kalantary, A.J. Jafari, B. Kakavandi, S. Nasseri, A. Ameri, A. Esrafili, Simultaneous removal of Lead and Aniline from industrial wastewater using magnetic composite of Fe3O4/PAC, Iran Occupational Health, 12(4) (2015).
21
[22] N.N. Greenwood, A. Earnshaw, Chemistry of the Elements, Elsevier, (2012).
22
[23] E. Pérez, L. Ayele, G. Getachew, G. Fetter, P. Bosch, A. Mayoral, I. Díaz, Removal of chromium (VI) using nano-hydrotalcite/SiO2 composite, J. Environm. Chem. Engin, 3(3) (2015) 1555-1561.
23
[24] J.H. Kim, H.J. Gibb, P.D. Howe, Cobalt and inorganic cobalt compounds, in, World health organization, 2013.
24
[25] M. Haining, Z. Zhenzhong, Z. Fangxia, Q. Tai, Y. Jingdong, Orthogonal optimization design for preparation of Fe 3 O 4 nanoparticles via chemical coprecipitation, Surface Science, 280 (2013) 679-685.
25
[26] F. Wang, C. Guo, L.r. Yang, C.Z. Liu, Magnetic mesoporous silica nanoparticles: fabrication and their laccase immobilization performance, Bioresource Technology, 101 (2010) 8931-8935.
26
[27] W.N. WS, H. MA, Removal of heavy metal ions from wastewater by chemically modified plant wastes as adsorbents: a review, Bioresource technology, 99 (2008) 3935-3948.
27
[28] H. Rezvan, h. h.nejad, Investigation on removal of heavy metals from aqueous solutions using iron oxide nanoparticles, in: National Conference on Environmental Health of Iran, in: Tabriz University of Medical Sciences and Health Services, 2014.
28
[29] G. KANTHIMATHI, P. KOTTEESWARAN, P.T. ARASU, M. KOTTAISAMY, Adsorption Efficiency of Synthetic Nano Iron Oxide and Commercial Activated Carbon Towards the Removal of Co (II) Ions, Chem Sci Trans, 3 (2014) 431-437.
29
[30] J. HM, Y. ZP, Z. Y, H. X, L. HZ, Zincon-immobilized silica-coated magnetic Fe3O4 nanoparticles for solid-phase extraction and determination of trace lead in natural and drinking waters by graphite furnace atomic absorption spectrometry, Talanta,, 94 (2012) 251-256.
30
[31] K.C. Baricka, M. Aslam, Y.-P. Linc, D. Bahadur, P.V. Prasadd, V.P. Dravid, Novel and Efficient MR active aqueous colloidal Fe3O4 nanoassemblies Materials Chemistry (2009).
31
[32] U. A, S.A. G, B. E, Y. Z, M. M, Fe3O4 and γ-Fe2O3 nanoparticles for the adsorption of Co2+ from aqueous solution, Journal of colloid and interface science, 298 (2006) 501-507.
32
[33] B. Kakavandi, A. Esrafili, A.M.-B. A, A. Jonidi, R. Rezaei, Magnetic Fe3O4@C nanoparticles as adsorbents for removal of amoxicillin from aqueous solution, Wat Sci Tech, 69(1) (2014) 147-155.
33
[34] J. Ren, M. Bopape, K. Setshedi, J. Kitinya, M. Onyango, Sorption of Pb (II) and Cu (II) by low-cost magnetic eggshells-Fe3O4 powder, Chemical Industry and Chemical Engineering Quarterly, 18(2) (2012) 221-231.
34
[35] M. Farzadkia, M. Gholami, M. Kermani, K. Yaghmaeian, Biosorption of hexavalent Chromium from aqueous solutions by chemically modified brown algae of Sargassum sp. and dried activated sludge, Asian Journal of Chemistry, 24(11) (2012) 52-57.
35
[36] A. Gholizadeh, M. Kermani, M. Gholami, M. Farzadkia, K. Yaghmaeian, Removal efficiency, adsorption kinetics and isotherms of phenolic compounds from aqueous solution using rice bran ash, Asian Journal of Chemistry, 25(7) (2013) 3871-3878.
36
ORIGINAL_ARTICLE
بررسی رفتار لرزهای اتصالات بال سوراخ شده با سوراخ لوبیایی
به علت بوجود آمدن آسیب در اتصالات بال جوش شده تقویت نشده در زلزله 1994 نورتریج، اتصالات خمشی مقطع تیر کاهش یافته و در بعد از آن اتصالات بال سوراخ شده برای جلوگیری از گسیختگی ترد زودرس در اتصالات جوشی رایج شد. در این مقاله، عملکرد لرزهای اتصالات مقاوم خمشی با بال سوراخ شده با سوراخ لوبیایی را که به عنوان یک روش ساده برای اتصالات بال سوراخ شده در نواحی لرزهای، مورد بررسی قرار میدهد. اتصالات بال سوراخ شده با بوجود آوردن سوراخ بوسیله مته بروی بالهای بالا و پایین، در امتداد محور اصلی تیر برای ایجاد یک منطقه ضعیف کنترل شده مفصل پلاستیک جهت کمتر شدن تمرکزهای تنش در لبههای اتصال، ایجاد میشوند. در این بررسی، بوسیله تعدادی از مطالعات تحلیلی، بر اساس تحقیقات آزمایشگاهی قبلی، برای ارزیابی اثر استفاده از سوراخ لوبیایی در اتصالات بال سوراخ شده بر پتانسیل شکست در اتصالات جوش شده نفوذی در مقایسه با اتصالات بال سوراخ شده انجام میشود. سوراخهای لوبیایی با نسبتهای متفاوت هندسی و نسبتهای مقاومت برشی چشمه اتصال استفاده گردید تا بهینه ترین طرح بدست آید که از شکست زودرس در جوشهای شیاری با نفوذ کامل جلوگیری شود. نتایج نشان داد که طول بهینه سوراخهای لوبیایی در نسبت طول لوبیایی به قطر سوراخ تقریباً برابر عدد 2 میباشد که این نسبت با توجه به الگوی ثابت قطر سوراخها که بوسیله مطالعات قبلی بدست آمده است میتواند سبب کاهش کرنش پلاستیک در جوش نفوذی اتصال مستقیم تیر به ستون به طور متوسط به اندازه 28% و کاهش کرنش پلاستیک در کنار سوراخها به اندازه 70% شود.
https://ceej.aut.ac.ir/article_2994_080093506f3d6edb5bfe5d501de35491.pdf
2021-03-21
229
246
10.22060/ceej.2018.14422.5652
اتصال بال سوراخ شده
اتصال بال سوراخ شده با سوراخ لوبیایی
اتصال مقطع تیرکاهش یافته
اتصال بال تقویت نشده
چشمه اتصال
پویا
شادمان حیدری
pouya_civil1@yahoo.com
1
مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه آزاد اسلامی واحد تهران شرق، تهران، ایران
AUTHOR
روح الله
احمدی جزنی
roohollah_ahmady@yahoo.co.uk
2
عمران استادیار دانشگاه آزاد واحد تهران شرق ایران
LEAD_AUTHOR
[1] Youssef. NFG, Bonowitz. D, Gross. JL. A, survey of steel moment resisting frame buildings affected by the 1994 Northridge earthquake, NIST, Report No. NISTIR 5625, Gaithersburg, MD, (1995).
1
[2] FEMA, State of the art report on connection performance, Report No, FEMA-355D, Federal Emergency Management Agency, (2000).
2
[3] Engelhardt. M. D, Fry. G, Johns. S, Venti. M, Holliday. S, Behavior and design of radius cut reduced beam section connections, Rep. No. 00/17, SAC, California, (2000).
3
[4] Uang. C, Yu. Q, Noel. S, Gross. J, Cyclic testing of Steel Moment Connections Rehabilitated with RBS or Welded Haunch, Journal of Structural Engineering (ASCE), 126(1) )2000( 57-68.
4
[5] Roeder. CW, Connection Performance for Seismic Design of Steel Moment Frames, Journal of Structural Engineering (ASCE), 128(4) (2002) 517-525.
5
[6] Lee. C, Jung. J, Oh. M, Koo. E, Experimental Study of Cyclic Seismic Behavior of Steel Moment Connections Reinforced with Ribs, Journal of Structural Engineering (ASCE), 131(1) (2005) 108-118.
6
[7] Chou. C, Wu. C, Performance Evaluation of Steel Reduced Flange Plate Moment Connections, Journal of Earthquake Engineering and Structural Dynamic, 36(14) (2007) 2083–97.
7
[8] Pachoumis. DT, Galoussi.s EG, Kalfas. CN, Christitsas. AD, Reduced beam section moment connections subjected to cyclic loading Experimental analysis and FEM simulation, Journal of Engineering Structure, 31(1) (2009) 216-223.
8
[9] M.GH. Vetr, M. Miri, A. Haddad, Seismic Behavior of a New Reduced Beam Section Connection by Drilled Holes Arrangement (RBS_DHA) on the Beam Flanges through Experimental Studies, 15th World Conference of Eathquake Engineering(15WCEE), Lisbn, Portugal, (2012).
9
[10] Ghassemieh. M, Kiani. J, Seismic Evaluation of Reduced Beam Section Frames Considering Connection Flexibility, Structural Design of Tall and Special Buildings, (2013) 1248-1269.
10
[11] Farrokhi. H, Danesh. F, Eshghi. SA, Modified Moment Resisting Connection for Ductile Steel Frames Numerical and experimental investigation, Journal of Constructional Steel Research 65(10-11) (2009) 2040-2049.
11
[12] Ardavan. Atashzaban, Iman. Hajirasouliha, Roohollah. Ahmady. Jazany, Mohsen Izadinia, Optimum drilled flange moment resisting connections for seismicregions, Journal of Constructional Steel Research, (2015).
12
[13] Roohollah. Ahmady. Jazany, Improved design of drilled flange (DF) moment resisting connection for seismic regions, Bulletin Earthquake Engineering, 16 )2017( 1987-2020.
13
[14]Hancock.JW, MackenzieAC, On the mechanisms of ductile failure in high strength steels subjected to multi-axial stress states, J Mech Phys Solids 24 (1976) 147–169.
14
[15]Kanvinde. AM, Deierlein. GG, Continuum based micromodels for ultra low cycle fatigue crack initiation in steel structures, Proceedings of thestructures congress and exposition, ASCE, Reston, VA, (2005).
15
[16]Kanvinde. AM, Deierlein. GG, A cyclic void growth model to assess ductil efracture in structural steel due to ultra low cycle fatigue, J Eng Mech, 133(6) (2007) 701–712.
16
[17] AISC, Seismic Provisions for Structural Steel Buildings, Chicago (IL), American Institute of Steel Construction, (2016).
17
[18] ANSYS, Release 16 reference manual, Swanson Analysis Systems, Inc, (2000).
18
[19] El-Tawil. S, Mikesell. T, Vidarsson. E, Kunnath. S, Strength and ductility of FR welded bolted connections, Report No, SAC/BD-98/01, Sacramento, CA, SAC Joint Venture, (1998).
19
[20] ATC. 24, Guidelines for cyclic seismic testing of components of steel structures, Applied Technology Council, (1992).
20
ORIGINAL_ARTICLE
بررسی اثر پارامترهای زلزله نزدیک گسل بر پاسخ پلهای رمپی دارای قوس افقی
جهت طراحی سیستمهای حملونقل ایمن، شناخت کامل از رفتار پیچیده پلها تحت زمینلرزه امری اجتنابناپذیر است. زمینلرزههای گذشته نشان دادند که پلهای دارای قوس افقی به دلیل نامنظمی هندسی بسیار متأثر از زمینلرزهها، بهویژه در حوزه نزدیک گسل میباشند. تحقیقات پیشین نشان دادند که سه پارامتر بزرگا، PGV و Tp تأثیرگذارترین پارامترهای زلزله نزدیک گسل میباشند. در این تحقیق با ساخت یک مدل نرمافزاری صحتسنجی شده بهوسیله آزمون میدانی و با بررسی دو پل دارای قوس افقی تلاش شد تأثیر پارامترهای زلزله نزدیک گسل بر پاسخ این نوع از پلها به دست آید. جهت تحلیل تاریخچه زمانی سه دسته رکورد نزدیک گسل بدست آمد که در هر یک از آنها دو پارامتر از بزرگا، PGV و Tp تقریباً ثابت باقیماند تا تأثیر پارامتر سوم را بتوان در نتایج مشاهده نمود. نتایج نشان داد که تغییر پارامتر PGV بیشترین تأثیر را بر پاسخ این نوع از پلها خواهد داشت. با افزایش طول پل و به عبارت دیگر دوره تناوب پل، تأثیر پارامتر Tp بر پاسخ بدست آمده افزایش مییابد. چنانچه تفاوت حداکثر تغییر مکان ابتدا و انتهای عرشه به عنوان معیاری جهت ارزیابی پتانسیل دوران عرشه درنظر گرفته شود، افزایش طول پل و قرارگیری در حوزه نزدیک گسل میتوانند سبب افزایش پاسخ دوران عرشه به ترتیب تا 37/2 و 47/2 برابر شوند.
https://ceej.aut.ac.ir/article_3025_8f2af6fb4400e517055e224b39428ab2.pdf
2021-03-21
247
260
10.22060/ceej.2018.14386.5640
زلزله نزدیک گسل
پل دارای قوس افقی
دوران عرشه
آزمون میدانی پل
سجاد
حیدری
sajad64_eng@yahoo.com
1
دانشجوی مهندسی زلزله، دانشکده مهندسی عمران، دانشگاه سمنان، سمنان، ایران
AUTHOR
محسن
گرامی
mgerami@semnan.ac.ir
2
دانشگاه سمنان
LEAD_AUTHOR
[1] J.R. Association, Specifications for highway bridges, part V Seismic design, (2002) 28.
1
[2] P.C. Jennings, Engineering features of the San Fernando earthquake of February 9, 1971, (1971).
2
[3] R.R. Wakefield, A.S. Nazmy, D.P. Billington, Analysis of seismic failure in skew RC bridge, Journal of Structural Engineering, 117(3) (1991) 972-986.
3
[4] B. Singh, S. Chakraverty, Flexural vibration of skew plates using boundary characteristic orthogonal polynomials in two variables, Journal of sound and vibration, 173(2) (1994) 157-178.
4
[5] G. Watanabe, K. Kawashima, Effectiveness of cable-restrainer for mitigating rotation of a skewed bridge subjected to strong ground shaking, in: 13th world conference on earthquake engineering, 2004, pp. 1-6.
5
[6] Y. Zuo, G. Sun, H. Li, Response analysis of curved bridge with unseating failure control system under near-fault ground motions, in: IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2018, pp. 022065.
6
[7] E.V. Monzon, C. Wei, I.G. Buckle, A. Itani, Seismic response of full and hybrid isolated curved bridges, in: Structures Congress 2012, 2012, pp. 603-612.
7
[8] W. Yen, G. Chen, M. Yashinsky, Y. Hashash, C. Holub, K. Wang, X. Guo, Bridge Lessons Learned from the Wenchuan, China, Earthquake, Transportation Research Record: Journal of the Transportation Research Board, (2202) (2010) 102-108.
8
[9] M. Abbasi, M.A. Moustafa, Effect of Shear Keys on Seismic Response of Irregular Bridge Configurations, Transportation Research Record: Journal of the Transportation Research Board, (2642) (2017) 155-165.
9
[10] M. Amjadian, A. Agrawal, Torsional response of horizontally curved bridges subjected to earthquake-induced pounding, in: 16th World Conference on Earthquake Engineering, 2017.
10
[11] A. Banerjee, A. Chanda, R. Das, Seismic analysis of a curved bridge considering deck‐abutment pounding interaction: an analytical investigation on the post‐impact response, Earthquake Engineering & Structural Dynamics, 46(2) (2017) 267-290.
11
[12] C. Heins, W.H. Lee, Curved box-girder bridge test: field test, Journal of the Structural Division, 107(2) (1981) 317-327.
12
[13] D. Huang, Field test and rating of Arlington curved-steel box-girder bridge: Jacksonville, Florida, Transportation Research Record: Journal of the Transportation Research Board, (1892) (2004) 178-186.
13
[14] D. Huang, Full-scale test and analysis of a curved steel-box girder bridge, Journal of Bridge Engineering, 13(5) (2008) 492-500.
14
[15] P.G. Somerville, N.F. Smith, R.W. Graves, N.A. Abrahamson, Modification of empirical strong ground motion attenuation relations to include the amplitude and duration effects of rupture directivity, Seismological Research Letters, 68(1) (1997) 199-222.
15
[16] P.G. Somerville, Magnitude scaling of the near fault rupture directivity pulse, Physics of the earth and planetary interiors, 137(1-4) (2003) 201-212.
16
[17] P. Spudich, B.S. Chiou, R. Graves, N. Collins, P. Somerville, A formulation of directivity for earthquake sources using isochrone theory, US Geol. Surv. Open-File Rept, 1268 (2004) 54.
17
[18] J.W. Baker, Quantitative classification of near-fault ground motions using wavelet analysis, Bulletin of the Seismological Society of America, 97(5) (2007) 1486-1501.
18
[19] M. Sasani, V. Bertero, Importance of severe pulse-type ground motions in performance-based engineering: historical and critical review, in, WORD CONFERENCE ON EARTHQUAKE ENGINEERING, 2000.
19
[20] V. Phan, M.S. Saiidi, J. Anderson, H. Ghasemi, Near-fault ground motion effects on reinforced concrete bridge columns, Journal of structural engineering, 133(7) (2007) 982-989.
20
[21] P.G. Somerville, Development of ground motion time histories for phase 2 of the FEMA/SAC steel project, SAC Joint Venture, 1997.
21
[22] P. Kavianijopari, Performance-based seismic assessment of skewed bridges, University of California, Irvine, 2011.
22
[23] K.R. Mackie, K.J. Cronin, B.G. Nielson, Response sensitivity of highway bridges to randomly oriented multi-component earthquake excitation, Journal of Earthquake Engineering, 15(6) (2011) 850-876.
23
[24] A. Ghobarah, W. Tso, Seismic analysis of skewed highway bridges with intermediate supports, Earthquake Engineering & Structural Dynamics, 2(3) (1973) 235-248.
24
[25] A. Abdel-Mohti, G. Pekcan, Seismic response of skewed RC box-girder bridges, Earthquake Engineering and Engineering Vibration, 7(4) (2008) 415-426.
25
[26] J.Y. Meng, E.M. Lui, Seismic analysis and assessment of a skew highway bridge, Engineering Structures, 22(11) (2000) 1433-1452.
26
[27] F. McKenna, G. Fenves, M. Scott, Open system for earthquake engineering simulation, University of California, Berkeley, CA, (2000).
27
[28] S. Caltrans, Caltrans seismic design criteria version 1.6, California Department of Transportation, Sacramento, (2010).
28
[29] M. Khanmohammadi, S. Heydari, Seismic behavior improvement of reinforced concrete shear wall buildings using multiple rocking systems, Engineering Structures, 100 (2015) 577-589.
29
[30] J.K. Kim, I.-H. Kim, H.-W. Lim, J.-H. Lee, J.-H. Lee, Cyclic Loading Test of Bridge Pier Models without Seismic Detailing, in: Eighth East Asia-Pacific Conference on Structural Engineering and Construction, Singapore, Singapore, 2001.
30
[31] M.N. Priestley, F. Seible, G.M. Calvi, Seismic design and retrofit of bridges, John Wiley & Sons, 1996.
31
[32] A. Shamsabadi, M. Kapuskar, G.R. Martin, Three-dimensional nonlinear finite-element soil-abutment structure interaction model for skewed bridges, in: Fifth National Seismic Conference on Bridges & Highways, 2006.
32
[33] J.D. Cooper, I.M. Friedland, I.G. Buckle, R.B. Nimis, N. McMullin Bobb, The Northridge earthquake: progress made, lessons learned in seismic-resistant bridge design, Public Roads, 58(1) (1994).
33
ORIGINAL_ARTICLE
مدلسازی ثابت سینتیکی حذف یون روی از پساب سنتزی با برنامهریزی بیان ژن
جدایش یونها از پسابها و محیط هایی مانند هیدرومتالورژی در سالهای اخیر چالش اساسی در روند توسعه فلوتاسیون یونی بوده است. مطالعه های محدودی در زمینه سینتیک حذف یونهای فلزی به وسیله فلوتاسیون یونی انجام شده است؛ بنابراین در این مطالعه، مدل جدیدی با روش برنامه ریزی بیان ژن (GEP) برای پیشبینی ثابت سینتیکی حذف یونهای روی از پساب سنتزی با کلکتور سدیم دودسیل سولفات ارائه شده است. کارآیی فلوتاسیون یونی علاوه بر میزان حذف یون به میزان حذف آب در طول فرآیند نیز بستگی دارد؛ بدین منظور سینتیک حذف آب نیز بررسی شد. پارامترهای مؤثر بر حذف یون روی از جمله نسبت مولاریته یون روی به کلکتور، ضریب فعالیت و pH محلول انتخاب و تأثیر آن بر ثابت سرعت حذف یون روی و آب بررسی شد. مقادیر R2، RMSE و VAF بهترتیب برابر با 98/0، 06/0 و 11/98 برای مرحله آزمون برای مدلسازی ثابت سینتیک حذف یون روی و مقادیر 94/0، 004/0 و 03/98 برای مدلسازی سینتیک حذف آب با استفاده از الگوریتم GEP به دست آمد. نتایج نشان داد که مدل های ارائه شده قابلیت استفاده برای پیشبینی ثابت سرعت سینتیکی حذف یون روی و حذف آب در طول فلوتاسیون را دارند. نتایج تجزیه و تحلیل حساسیت نشان داد که pH محلول و نسبت مولاریته یون روی به کلکتور بهترتیب تأثیر معناداری بر ثابت سینتیکی حذف یون روی و حذف آب دارند.
https://ceej.aut.ac.ir/article_2976_676c9ee801b6cf3c810406eb69b77717.pdf
2021-03-21
261
272
10.22060/ceej.2018.14346.5629
فلوتاسیون یونی
سینتیک
حذف یون روی
حذف آب
تجریه و تحلیل حساسیت
فاطمه السادات
حسینیان
f_hoseinian@aut.ac.ir
1
گروه فرآوری مواد معدنی، مهندسی معدن و متالورژی، دانشگاه صنعتی امیرکبیر، تهران، ایران
AUTHOR
بهرام
رضایی
rezai@aut.ac.ir
2
امیر کبیر
LEAD_AUTHOR
الهه
کوثری
kowsarie@aut.ac.ir
3
گروه شیمی دانشگاه صنعتی امیرکبیر
AUTHOR
[1] S. Nicol, K. Galvin, M. Engel, Ion flotation-potential applications to mineral processing, Minerals Engineering, 5(10-12) (1992) 1259-1275.
1
[2] H. Polat, D. Erdogan, Heavy metal removal from waste waters by ion flotation, Journal of Hazardous Materials, 148(1-2) (2007) 267-273.
2
[3] J. Rubio, M. Souza, R. Smith, Overview of flotation as a wastewater treatment technique, Minerals engineering, 15(3) (2002) 139-155.
3
[4] F.S. Hoseinian, M. Irannajad, A.J. Nooshabadi, Ion flotation for removal of Ni (II) and Zn (II) ions from wastewaters, International Journal of Mineral Processing, 143 (2015) 131-137.
4
[5] F.S. Hoseinian, M. Irannajad, M. Safari, Effective factors and kinetics study of zinc ion removal from synthetic wastewater by ion flotation, Separation Science and Technology, 52(5) (2016), 892-902.
5
[6] A. Bodagh, H. Khoshdast, H. Sharafi, H. Shahbani Zahiri, K. Akbari Noghabi, Removal of cadmium (II) from aqueous solution by ion flotation using rhamnolipid biosurfactant as an ion collector, Industrial & Engineering Chemistry Research, 52(10) (2013) 3910-3917.
6
[7] M. Reyes, F. Patiño, F.J. Tavera, R. Escudero, I. Rivera, M. Pérez, Kinetics and recovery of xanthate-copper compounds by ion flotation techniques, Journal of the Mexican Chemical Society, 53(1) (2009) 15-22.
7
[8] Z. Liu, F.M. Doyle, A thermodynamic approach to ion flotation. I. Kinetics of cupric ion flotation with alkylsulfates, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 178(1-3) (2001) 79-92.
8
[9] M. Reyes, F. Patiño, R. Escudero, M. Pérez, M.U. Flores, I.A. Reyes, Kinetics and hydrodynamics of silver ion flotation, Journal of the Mexican Chemical Society, 56(4) (2012) 408-416.
9
[10] F.M. Doyle, Z. Liu, The effect of triethylenetetraamine (Trien) on the ion flotation of Cu2+ and Ni2+, Journal of colloid and interface science, 258(2) (2003) 396-403.
10
[11] Z. Liu, F.M. Doyle, Ion flotation of Co2+, Ni2+, and Cu2+ using dodecyldiethylenetriamine (Ddien), Langmuir, 25(16) (2009) 8927-8934.
11
[12] E.P. Mavros, K. Matis, Innovations in Flotation Technology, (1992).
12
[13] C. McDonald, J. Jaganathan, Ion flotation of nickel using ethylhexadecyldimethylammonium bromide, Microchemical Journal, 27(2) (1982) 240-245.
13
[14] F.S. Hoseinian, B. Rezai, E. Kowsari, M. Safari, Kinetic study of Ni (II) removal using ion flotation: Effect of chemical interactions, Minerals Engineering, 119 (2018) 212-221.
14
[15] F.S. Hoseinian, B. Rezai, E. Kowsari, The nickel ion removal prediction model from aqueous solutions using a hybrid neural genetic algorithm, Journal of environmental management, 204 (2017) 311-317.
15
[16] K. Shakir, A.F. Elkafrawy, H.F. Ghoneimy, S.G.E. Beheir, M. Refaat, Removal of rhodamine B (a basic dye) and thoron (an acidic dye) from dilute aqueous solutions and wastewater simulants by ion flotation, Water research, 44(5) (2010) 1449-1461.
16
[17] M.A. Soliman, G.M. Rashad, M.R. Mahmoud, Kinetics of ion flotation of Co (II)–EDTA complexes from aqueous solutions, Radiochimica Acta, 103(9) (2015) 643-652.
17
[18] A. Uribe‐Salas, R. Pérez‐Garibay, F. Nava‐Alonso, M. Castro‐Román, A kinetic model for Pb2+ flotation with sodium dodecylsulfate in a batch column, Separation science and technology, 40(15) (2005) 3225-3237.
18
[19] F.M. Doyle, Ion flotation—its potential for hydrometallurgical operations, International Journal of Mineral Processing, 72(1-4) (2003) 387-399.
19
[20] R.S. Faradonbeh, D.J. Armaghani, M. Monjezi, Development of a new model for predicting flyrock distance in quarry blasting: a genetic programming technique, Bulletin of Engineering Geology and the Environment, 75(3) (2016) 993-1006.
20
[21] C. Ferreira, Gene expression programming in problem solving, in: Soft computing and industry, Springer, 2002, pp. 635-653.
21
[22] F.S. Hoseinian, R.S. Faradonbeh, A. Abdollahzadeh, B. Rezai, S. Soltani-Mohammadi, Semi-autogenous mill power model development using gene expression programming, Powder Technology, 308 (2017) 61-69.
22
[23] C. Ferreira, Gene expression programming: mathematical modeling by an artificial intelligence, Springer, 2006.
23
[24] D.J. Armaghani, R.S. Faradonbeh, H. Rezaei, A.S.A. Rashid, H.B. Amnieh, Settlement prediction of the rock-socketed piles through a new technique based on gene expression programming, Neural Computing and Applications, (2016) 1-11.
24
[25] H.M. Azamathulla, Gene expression programming for prediction of scour depth downstream of sills, Journal of Hydrology, 460 (2012) 156-159.
25
[26] H.M. Azamathulla, Z. Ahmad, Gene-expression programming for transverse mixing coefficient, Journal of Hydrology, 434 (2012) 142-148.
26
[27] R.S. Faradonbeh, M. Monjezi, D.J. Armaghani, Genetic programing and non-linear multiple regression techniques to predict backbreak in blasting operation, Engineering with Computers, 32(1) (2016) 123-133.
27
[28] M.Z. Hashmi, A.Y. Shamseldin, B.W. Melville, Statistical downscaling of watershed precipitation using Gene Expression Programming (GEP), Environmental Modelling & Software, 26(12) (2011) 1639-1646.
28
[29] M. Khandelwal, R.S. Faradonbeh, M. Monjezi, D.J. Armaghani, M.Z.B.A. Majid, S. Yagiz, Function development for appraising brittleness of intact rocks using genetic programming and non-linear multiple regression models, Engineering with Computers, 33(1) (2017) 13-21.
29
[30] N.A. Zakaria, H.M. Azamathulla, C.K. Chang, A.A. Ghani, Gene expression programming for total bed material load estimation—a case study, Science of the total environment, 408(21) (2010) 5078-5085.
30
ORIGINAL_ARTICLE
ارزیابی احتمالاتی آسیبپذیری لرزهای سازههای بتن آرمه بهسازی شده با مهاربند برون محور دارای پیوند قائم
امروزه انبوهی از ساختمانها وجود دارند که بنا به دلایل مختلفی احساس میشود نتواند حداقل نیازهای لرزهای مدنظر آییننامههای جاری را تأمین کند. به همین دلیل باید اقدام به بهسازی لرزهای ساختمانها کرد. مهاربند فولادی برون محور با تیر لینک قائم یک روش بهسازی نوین در ارتقای لرزهای ساختمانهای موجود میباشد. در این مقاله از این تکنیک بهسازی استفاده شده است. به این منظور در این تحقیق سه تیپ ساختمان بتن آرمه دارای پلان یکسان با طبقات 3، 5، 8 انتخاب و این سازهها با استفاده از مهاربند فولادی برون محور با پیوند قائم بهسازی میگردد، سپس با مدلسازی در نرمافزار OpenSEES و استفاده از روش تحلیل دینامیکی غیرخطی فزاینده و تشکیل منحنیهای شکنندگی، مورد ارزیابی لرزهای قرار میگیرند. پارامتر تقاضای لرزهای دریفت طبقات فرض گردید و ضمناً مقادیر ظرفیت دریفت طبقات برای سطوح آسیب مختلف از آییننامه هازوس بدست آمدهاند و بر این اساس منحنیهای شکنندگی لرزهای ترسیم شدهاند. نتایج حاکی از تأثیر این روش مقاوم سازی در کاهش آسیبپذیری لرزهای این ساختمانها دارد. در سطح عملکرد آسیب کامل مقادیر میانه شکنندگی لرزهای برای مدلهای 3 و 5 و 8 طبقه به ترتیب %35، %90 و %146 درصد افزایش داشته است.
https://ceej.aut.ac.ir/article_3272_2b021ffe6665a5be16b98a50de15f1f3.pdf
2021-03-21
273
296
10.22060/ceej.2019.14313.5621
ارزیابی احتمالاتی
بهسازی
سازههای بتن آرمه
مهاربند برون محور
پیوند قائم
محمد
شامخی امیری
shamekhi@shahroodut.ac.ir
1
استادیار گروه عمران؛ دانشگاه صنعتی شاهرود
AUTHOR
علی
ناصری
eng_alinaseri@yahoo.com
2
دانشجوی دکترا عمران، دانشگاه صنعتی نوشیروانی بابل
LEAD_AUTHOR
محمود
مسگرپورامیری
m_amiri2017@yahoo.com
3
کارشناسی ارشد عمران موسسه آموزش عالی علوم و فناوری آریان بابل
AUTHOR
[1] D. Guha-apir, F. Vos, R. Below, S. Ponserre, Annual Disaster Statistical Review 2010: The Numbers and Trends. Centre for Research on the Epidemiology of Disasters (CRED), (2010).
1
[2] w. site, The Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of science and Technology, web site: http://www.iust.ac.ir/page.php?slc_lang=fa&sid=57&slct_pg_id=8715, in.
2
[3] T. Anagnos, C. Rojahn, A. Kiremidjian, NCEER-ATC Joint Study on Fragility of Buildings, National Center for Earthquake Engineering Research (NCEER) (1995).
3
[4] حیدریان، علی. شریفیان، حمید.، طراحی و بهسازی لرزهای سازههای بتن مسلح با استفاده از مهاربند پانل برشی (تیر پیوند قائم) براساس سطح عملکرد, همایش ملی مهندسی عمران و توسعه پایدار، (1389).
4
[5] احمدی نژاد، سیدعلی. مظلوم، موسی.،عملکرد تیر پیوند قائم در سازههای بهسازی شده و ارائه یک روش مدلسازی در برنامه sap2000"، دومین کنفرانس ملی سازه-زلزله و ژئوتکنیک، آذرماه91، مازندران، ایران، (1391).
5
[6] A. Ghobarah , H. Abou-Elfath, Rehabilitation of a reinforced concrete frame using eccentric steel bracing, Engineering structures, 23 (2001) 745-755.
6
[7] M. D Aniello, G. Della Corte, F. Mazzolani, Seismic upgrading of RC building by steel eccentric braces: Experimental results vs. numerical modeling, in: 5th international conference on behavior of steel structures in seismic areas, 2006.
7
[8] W. Da-peng, Y. An-lin, X. Li-ming, Seismic performance testing ofreinforcement concrete frames strengthened with Y-eccentrically brace, Journal of Chongqing University (English Edition), 11(151-160) (2012).
8
[9] M.M. Al-Dwaik, A.N. S., Analytical CaseStudy of Seismic Performance of Retrofit Strategies for Reinforced Concrete Frames: Steel Bracing with Shear LinksVersus Column Jacketing, Jordan Journal of Civil Engineering, 7(1) (2013) 26-43.
9
[10] V. Nandi, Gunderao, G.S. Hiremath Seismic Behavior of Reinforced Concrete Frame with Eccentric Steel Bracings, SSRG International Journal of Civil Engineering (SSRG-IJCE), 2(6) (2015) 42-46.
10
[11] G. Ince, H. Ince, Huseyn., C. Ocal, Seismic behavior of RC frames retrofirred by eccentrically braced frames with vertical link in: Proceedings of 27th The IIER International Conference, Petersburg, Russia, 2015, pp. 87-90.
11
[12] HAZUS-MH MR5. 2003. “Multi-Hazard loss Estimation Methodology, Earthquake Model.” Washington, DC, USA: Federal Emergency Management Agency.
12
[13] H. Pahlavan, A. Naseri, A. Einolahi, Probabilistic Seismic Vulnerability assessment of RC Frame Structures Retrofitted with Steel Jacketing, Amirkabir Journal of Civil Engineering, (2018) .
13
[14] Code No. 360, 2007. Islamic Republic of Iran, Management and Planning Organization, Instruction for Seismic Rehabilitation of Existing Buildings.
14
[15] Mazzoni, S., McKenna, F. and Fenves, G.L., 2005. “OpenSees command language manual”. Pacific Earthquake Engineering Research (PEER) Center, 264.
15
[16] Okazaki, T., Arce, G., Ryu, H. C., and Engelhardt, M. D., “Experimental study of local buckling, overstrength, and fracture of links in eccentrically braced frames”. Journal of Structural Engineering, (2005),131(10), 1526-1535.
16
[17] S.M. Hosseini-Gelekolai, M.R. Tabeshpour, soft story design in reinforced concrete structure and effect of masonry infill wall, in: Sixth International Conference of Seismology and Earthquake Engineering, TEHRAN, IRAN, 2011.
17
[18] M. poursha, F. khoshnoudian, A.S. moghdam, A consecutive moal pushover procedure for estimating the seismic demands of tall buildings, Engineering structures, 31 (2009) 591-599.
18
[19] FEMA. Quantification of building seismic performance factors. FEMA P695. 2009. Federal Emergency Management Agency, Washington, DC.
19
[20] A. Naseri, H. Pahlavan, G. Ghodrati Amiri, Probabilistic seismic assessment of RC frame structures in North of Iran using fragility curves, Journal of Structural and Construction Engineering, 4(4) (2017) 58-78.
20
[21] Earthquake damage evaluation data for California, Applied Technology Council (ATC). 1985.
21
[22] H. Pahlavan, a. naseri, S. Rafiei, H. Baghery, The Effect of Columns Height and Span Number on the Vulnerability of Horizontally Curved Multiframe RC Box-Girder Highway Bridges, Amirkabir Journal of Civil Engineering, (2017) .
22
ORIGINAL_ARTICLE
تحلیل ریسک زلزله شهرکرد به روش نروفازی با استفاده از ارزیابی لرزهای سازهها
امروزه علم تحلیل ریسک و بهسازی لرزهای سازهها از شاخه های مهندسی زلزله می باشند که روند آنها بسیار طولانی، حجیم و هزینه بر می باشد. یکی از مهمترین مشکلات در این زمینه، زمانبر بودن و درصد خطای بالای آنها می باشد. لذا با دستیابی به یک نتیجه منطقی میتوان از سیستم های تصمیم گیر به منظور حل مشکلات استفاده نمود. هدف تهیه روشی است که بتوان به کمک آن تحلیل ریسک زلزله را از طریق مطالعات بهسازی با استفاده از ابزار نروفازی تسریع بخشید. در این روش 400 مدرسه از مدارس شهرکرد و حومه را بصورت تصادفی انتخاب و سپس به ارزیابی میزان پذیرش خطر لرزهای آنها با استفاده از چک لیست ارزیابی سریع براساس دستورالعمل ارزیابی سریع ساختمان ها، نشریه 364 و روش ATC پرداخته شد. همچنین به کمک از نرمافزار وِکا از بین چندین داده مربوط به اطلاعات سازهایی، مؤثرترین آنها با توجه به تعداد تکرار و ارزش انتخاب سپس در نرمافزار Anfis به منظور طراحی سیستم نروفازی استفاده شد. برای بررسی دقت مدل طراحی شده ابتدا به مقایسه سطح خطر بدست آمده از سیستم نروفازی و سطح خطر واقعی و در گام بعد به محاسبه میزان پراکندگی خروجی های سیستم و مقایسه با نتایج موجود در داده ها پرداخته شده است. و این حاکی از انطباق نتایج سیستم نروفازی و نتایج حاصل از ارزیابی کیفی و کارایی مناسب این سیستم می باشد. از مهمترین مزایای این روش می توان به مدل کردن عدم قطعیت ها، ورود اطلاعات از سازه به روش کیفی و کمی، سرعت بالای روند تحلیل ریسک اشاره نمود .
https://ceej.aut.ac.ir/article_2978_48f991bde474b261bbf251eec784493f.pdf
2021-03-21
297
312
10.22060/ceej.2018.14295.5620
منطق فازی
سیستم فازی عصبی
سیستم درخت تصمیم
عدم قطعیت
توابع عضویت
غلامرضا
کیوانی هفشجانی
reza.keyvani1@gmail.com
1
دانشگاه آزاد اسلامی واحد شهرکرد
LEAD_AUTHOR
[1] کوهی کمالی، مهران، « تحلیل خطر احتمالاتی شهرکرد»، پایان نامه،۱۳88.
1
[2] دستورالعمل ارزیابی لرزهای سریع ساختمانهایموجود، نشریهی شماره 364 پژوهشگاه بین المللی، زلزله شناسی و مهندسی زلزله، .1387
2
[3] سلطانی، سعید، سرداری، سروش، شیخ پور، مژگان، (1389)، شبکه های عصبی مصنوعی، چاپ اول، انتشارات علمی، فرهنگی نص.
3
[4] سکاران، راجا، آلاکشمی پای، ویجی، (1391)، شبکه های عصبی،منطق فازیو الگوریتم ژنتیک و کاربرد، چاپ اول، انتشارات نورپردازان
4
[5] کیا، مصطفی (1389)، شبکه های عصبی در MATLAB، چاپ اول، انتشارات کیان رایانه سبز
5
[6] کیا، مصطفی (1390)، منطق فازی در MATLAB، چاپ دوم، انتشارات مرکز نشر دانشگاهی
6
[7] گرامی مقدم،رحیم، مقایسه روشهای شبکه عصبی مصنوعی و نروفازیANFIS در پیش بینیجریان سالانه رودخانه بشار، دانشگاه آزاد اسلامی واحد شیراز، 1393
7
[8] اثمری سعدآباد، سهیل، « تحلیل ریسک زلزله با سیستم استنتاج گر فازی و مطالعه موردی شهر تهران»، پایان نامه،۱۳۹2.
8
[9] زینلی راستابی، صفدر، قدرتی امیری، غلامرضا، «ارزیابی خطرپذیری شهرکرد»، نشریه مهندسی سازه و ساخت،۱۳۹۳
9
[10] وانگ،لی، سیستم های فازی و کنترل فازی، ترجمه محمد تشنه لب، نیما صفاپور، داریوش افیونی . دانشگاه صنعتی خواجه نصیرالدین طوسی، مهر1380
10
[11] وانگ، لی، ترجمه محمد تشنه لب، نیما صفارپور، داریوش افیونی، « سیستم های فازی و کنترل فازی»
11
[12] آذر، عادل و حجت فرجی(1386)، علم مدیریت فازی، چاپ اول، انتشارات مرکز مطالعات مدیریت و بهره وری ایران، وابسته به دانشگاه تربیت مدرس.
12
[13] گودرزی، محمدرضا، کنگاوری، محمدرضا،(1383)، یادگیری درخت تصمیم فازی، پنجمین کنفرانس سیستمهای فازی ایران، ص 125
13
[14]منهاج، محمد باقر،«محاسبات فازی (جلد سوم): هوش محاسباتی» تهران انتشارات دانش نگار،1388.
14
[15] WWW.iiees.ac.ir
15
[16] J. Yuan, “Dealing with stochastic dependence in the modeling of train delays and delay propagation”, International conference on transportation engineering, 2007.
16
[17] K. Briggs, C. Beck, “Modeling train delays with q-exponential functions”, Statistical Mechanics and its Applications, May 2007, pp. 498-504.
17
[18] V.T. Tran , B.S. Yang , M.S. Oh , and A.C. Chiow Tan, “Fault diagnosis of induction motor based on decision trees and adaptive neuro-fuzzy inference”, Expert Systems with Application, 2009, pp. 1840-1849.
18
[19] M.A. Mashrei , N. Abdulrazzaq , T.Y. Abdalla , M.S. Rahman, “Neural networks model and adaptive neuro-fuzzy inference system for predicting the moment capacity of ferrocement members”, Engineering Structures, June 2010, pp.
19
[20] N.Bartoletti, F.Casagli,S.Marsili,Libelli, “Data-driven rainfall/runoff modelling based on a neuro-fuzzy inference system”, Elsevier, 2017.
20
[21] Zs.J.Viharos “Survey on Neuro-Fuzzy systems and their applications in technical diagnostics and measurement”, Elsevier, 2015.
21
ORIGINAL_ARTICLE
استفاده از شبکه عصبی مصنوعی (ANN) و الگوریتم رقابت استعماری به منظور ارزیابی کیفیت آب زیرزمینی دشت جلفا برای مصارف مختلف
بررسیهای کمی و کیفی آبهای زیرزمینی اهمیت ویژهای در مدیریت این منابع دارند. بکارگیری روش های نوین از جمله شبکه های عصبی و الگوریتم های تکاملی در تخمین کیفیت آب به دلیل سرعت، همگرایی و کارآیی بسیار بالای خود، موجب صرفه جویی، کاهش هزینه ها و مدیریت هر چه بهتر می شود. هدف اصلی از انجام این تحقیق بررسی نتایج آنالیز شیمیایی آبهای زیرزمینی دشت جلفا با توجه به نمونه برداری از 14 حلقه چاه، نمودارهای ویلکاکس، شولر و پایپر و همچنین تخمین پارامترهای کیفی آب زیرزمینی با استفاده از شبکه های عصبی مصنوعی و الگوریتم رقابت استعماری می باشد. در همین راستا، پارامترهای کیفی آب زیرزمینی شامل TDS، EC و SAR با استفاده از شبکههای عصبی مصنوعی و الگوریتم رقابت استعماری تخمین زده شد و کیفیت منابع آب زیرزمینی از نظر شرب، کشاورزی و صنعت با استانداردهای ویلکاکس، پایپر و شولر مورد بررسی قرار گرفت. ضریب همبستگی بالای 90 درصد، نشان دهنده ی دقت قابل قبول شبکه عصبی مصنوعی در مقایسه با الگوریتم رقابت استعماری در تخمین پارامترهای کیفی آب زیرزمینی است. همچنین نتایج استفاده از دیاگرام های مختلف نشان می دهد نمونه ها دارای سختی و خورندگی خیلی زیاد بوده و از نظر استفاده در شرب و صنعت نامناسب نمی باشند. طبق طبقه بندی کلاسها، اکثر داده ها در کلاسC4S2 قرار دارند که آب این گروه برای مقاصد کشاورزی نامناسب می باشد.
https://ceej.aut.ac.ir/article_3021_e07df83068cceb42fb28869d119b816d.pdf
2021-03-21
313
330
10.22060/ceej.2018.14258.5605
کیفیت آب
شبکه عصبی مصنوعی
الگوریتم رقابت استعماری
شرب
کشاورزی
سمیه
امامی
somayehemami70@gmail.com
1
گروه مهندسی آب دانشگاه تبریز
LEAD_AUTHOR
رضا
نوروزی سرکارآباد
rezanoruzi1992@gmail.com
2
گروه مهندسی آب دانشگاه تبریز
AUTHOR
یحیی
چوپان
yahyachoopan68@gmail.com
3
گروه مهندسی آب دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
[1] A. Saffarzadeh, S. KhayatRostami, Laboratory evaluation of the effect of elevation on the submerged rectangular Piano Key weirs hydraulic. Journal of Dam and Hydroelectric, 2(7) (2015) 1-12.
1
[2] S. Emami, H. Arvanaghi, J. Parsa, Evaluation and comparison Imperialist Competitive and Genetic algorithms in Estimation of groundwater quality parameters. Journal of Hydrogeology, (2016). (In Persian).
2
[3] M. M. Mirsanjouri, F. Mohammadyari, R. Basiri, F. Hamidipour, Modeling the EC, SAr and TDS in groundwater using artificial neural network (case study: Mehran and Dehloran Plain). Human and Environmental Quarterly Journal, 42 (2015) pp. 1-12. (In Persian)
3
[4] M. Asgharimoghaddam, Water and urban habitat. Sara Press, (2005). (In Persian).
4
[5] H. Zare-Abiyaneh, M. Bayat-Varshaki, S. Akhavan, M. Mohammadi, Estimation of groundwater in Hamedan plain using artificial neural network (ANN0 and effect of data separation on prediction accuracy. Journal of Ecology, 58 (2011) 129-140.
5
[6] S. A. Moasheri, O. M. Rezapour, Z. Beyranvand, Z. Poornoori, Estimating the spatial distribution of groundwater quality parameters of Kashan plain with integration method of Geostatistics - Artificial Neural Network Optimized by Genetic-Algorithm. International Journal of Agriculture and Crop Science, 5 (20) (2013) 2434-2442.
6
[7] A. Safilo, gh. Ahmadzadeh, A. Kanooni, A. Rasoulzadeh, Evaluation of groundwater quality for agriculture use in Azarshar Plain. First Iranian National Irrigation and Drainage Congress, (2015). (In Persian).
7
[8] S. Ghasemian, H. Khosravi, Investigation of the process of quantitative and quantitative changes of the Haraz river. First Iranian National Irrigation and Drainage Congress, (2015). (In Persian).
8
[9] M. J. Amiri, J. Abedi- Koupai, S. Eslamian, S. F. Mousavi, M. Arshadi, Modeling pb adsorption based on synthetic and industrial wastewaters by ostrich bone char using artificial Neural Network and Multivariate non-linear regression, Int. J, Hydrology Science and Technology, 3 (3) (2013) 221-240.
9
[10] S. S. Eslamian, N. Lavaei, Modeling Nitrat pollution of Groundwater using Artificial Neural Network and Genetic Algoritm in an Arid zone, international Jornal of water, Special Issue on Groundwater and surface water Interaction (GSWI), 5 (2) (2009) 194-203.
10
[11] S. Karimi-Sissi, R. Dalir Hasannia, K. Farajzadeh, A. Asadi, Modeling hydrochemical parameters of Aji-Chayriver using genetic planning. First international congress of earth sciences, (2013). (In Persian).
11
[12] N. Naseri, H. Mohammadzadeh, S. Ebrahimpour, investigation of Hydrochemistry and hydrological of Sahand area. First national conference on Water resource research in Iran, (2010). (In Persian).
12
[13] M. M. Mirsanjori, F. Mohammadyari, R. Basiri, F. Hamidipour, Modeling of EC, SAR and TDS quality parameters of groundwater using neural artificial network (ANN) (case study: Mehran and Dehloran plain), Human and Environmental Quarterly Journal, 42 (2016) 2-12. (In Persian).
13
[14] Engineers PC. Semi-detailed studies of groundwater resources in Semnan province. Regional Water Authority of Semnan: 2017.
14
[15] G. K. Holz, Seasonable variation in groundwater levels and quality under intensively drained. Seasonable variation in groundwater levels and quality under intensively drained and grazed pasture in the montage catchment NW Tasmania. Agricultural water management. 96 (2009) 255-266.
15
[16] N. S. Magesh, S. Krishnakumar, N. Chandrasekar, Groundwater quality assessment using WQI and GIS techniques, Dindigul district, Tamil Nadu, India. Arab Journal of Geoscience. 6 (2013) 4179-4189.
16
[17] S. Marofi, Z. Maryanji, Stream water quality in the western regions of Iran. Journal of Biotechnology. 6 (2007) 1728-1731.
17
[18] Y. P. Ouyang, Q. T. Nkedi-Kizza, D. Wu, C. H. Shinde, Assessment of seasonal variations in surface water quality. Water Research. 20 (2006) 3800-3810.
18
[19] K. S. Palupi, S. Sumengen, L. Inswiasri, S. A. Agustina, W. Nunik, A. Sunarya, River water quality study in the vicinity of Jakarta. Water Science and Technology. 9 (1995) 17-25.
19
[20] L. Rafati, M. Mokhtari, F. Fazelinia, S. M. Momtaz, A. H. Mahvi, Evaluation of ground water fluoride concentration in Hamadan Province west of IRAN (2012). Iranian Journal of Health Sciences, 1(3) (2013) 71-76.
20
[21] F. Chang, Y. Kuo, C. Wuing Liu, Artificial neural networks for estimating regional arsenic concentrations in a blackfoot disease area in Taiwan. Journal. Hydrology, 388 (2010) 65-76.
21
[22] D. T. Larose, Discovering knowledge in data: an introduction to data mining. Jhon Wiley & Sons Inc, (2005) 240 p.
22
[23] M. Isazadeh, R. Arabzadeh, S. Darbandi, Performance evaluation of geostatistical methods and Artificial Neural Network in estimation of aquifer quality parameters (case study: Qorveh Dehghan plain). J. Water and Soil Sci. (Sci. & Technol. Agric. & Natur. Resour.), 20 (77) (2015) 197-210.
23
[24] R. Rooki, A. Ariafar, J. Adeli-Nasab, Evaluation of groundwater quality of Gonabad plain aquifer in Khorasan Razavi using multivariate statistical methods and Artificial Intelligence. Mineral Resources Engineering Journal, 2 (1) (2017) 49-61.
24
[25] D. T. Larose Discovering knowledge in data: an introduction to data mining. Jhon Wiley & Sons Inc. (2005) 240 p.
25
ORIGINAL_ARTICLE
مدل تمایل موتورسیکلتسواران شاغل در محدوده مرکزی شهر تهران به خرید موتورسیکلت برقی
امروزه در شهرهای بزرگ و پرجمعیتی مانند تهران، عدم محدودیت استفاده از موتورسیکلت بنزینی در کنار طرحهای محدود کننده تردد خودرو شخصی مانند طرح زوج و فرد باعث رشد استفاده از موتورسیکلت های بنزینی شده است. بر این اساس، استفاده از موتورسیکلت برقی برای کاهش مشکلات ناشی از موتورسیکلت های بنزینی مانند آلودگی هوا و آلودگی صوتی، در تهران مورد توجه قرار گرفته است. این مطالعه با کمک اطلاعات حاصل از مصاحبه با 503 موتورسیکلت سوار شاغل در محدوده مرکزی شهر تهران با هدف شناسایی عوامل مؤثر بر تمایل موتورسیکلت سواران شاغل در محدوده مرکزی تهران به خرید موتورسیکلت برقی با اعطای تسهیلات مشخص در شرایط ممنوعیت تردد موتورسیکلتهای بنزینی در این محدوده انجام شده است. در این مطالعه با کمک مدل لوجیت دوگانه نقش متغیرهایی مانند خصوصیات سفر، خصوصیات موتورسیکلت، مشخصات اقتصادی-اجتماعی افراد و پندارهای افراد به استفاده از موتورسیکلت شناسایی شد. نتایج نشان میدهد کسانی که به دلیل قیمت ارزان موتورسیکلت از آن استفاده می کنند، کسانی که مسافت زیادی در روز می پیمایند و آنان که موتورسیکلت قدیمی تری دارند، تمایل کمتری به استفاده از موتورسیکلت برقی دارند. در نهایت، پیشنهاداتی جهت کاربرد این مدل نیز ارائه شده است.
https://ceej.aut.ac.ir/article_2930_b438a951b9810604b051b52494c81b08.pdf
2021-03-21
331
342
10.22060/ceej.2018.14045.5543
موتورسیکلت برقی
موتورسیکلت بنزینی
مدیریت تقاضای حملونقل
محدوده مرکزی شهر تهران
مدل لوجیت
ملیحه
شجاعی زاده
maliheshojaee999@gmail.com
1
گروه حمل و نقل، دانشکده مهندسی عمران، دانشگاه صنعتی امیرکبیر، تهران، ایران
AUTHOR
میقات
حبیبیان
habibian@aut.ac.ir
2
گروه حمل و نقل، دانشکده عمران، دانشگاه امیرکبیر، تهران، ایران
LEAD_AUTHOR
[1] M. N. I. Ibrahim and N. K. Yakub, "Effect of restricting the operation of motorcycles users to day light period on RTAs: A case study of Jos, Nigeria", International Journal of Engineering and Technology, Vol. 4, No. 4, p.p. 180-183, 2014.
1
[2] A. Kumar, "Understanding the emerging role of motorcycles in African cities", SSATP Discussion Paper, No. 13, p.p. 1-24, 2011.
2
[3] J. Pucher, Z. R. Peng, N. Mittal, Y. Zhu, and N. Korattyswaroopam, "Urban transport trends and policies in China and India: impacts of rapid economic growth," Transport Reviews, Vol. 27, p.p. 379-410, 2007.
3
[4] X. Zhu, " Motorcycle ban in guangzhou and two-wheeler issues in china," Presentation at World Bank Transforming Transportation Conference, Washington D.C., USA, 2011.
4
[5] H.-C. Lai, J.-S. Liu, D. Lee, and L.-S. Wang, "Design parameters study on the stability and perception of riding comfort of the electrical motorcycles under rider leaning," Mechatronics, Vol. 13, p.p. 49-76, 2003.
5
[6] Air quality control company. affiliated with Tehran municipality. Available at: http://air.tehran.ir/Default.aspx?tabid=562. Accessed Dec. 14, 2017.
6
[7] Mehr news agency. Available at: https://www.mehrnews.com/news/2356943. Accessed Dec. 14, 2017.
7
[8] Y.-C. Chiu and G.-H. Tzeng, "The market acceptance of electric motorcycles in Taiwan experience through a stated preference analysis," Transportation Research Part D: Transport and Environment, Vol. 4, p.p. 127-146, 1999.
8
[9] Jamejamonline new agency. Available at: https://www.jamejamonline.ir/online/164592711187347787. Accessed Dec. 14, 2017.
9
[10] H.-L. Chang and S.-C. Wu, "Exploring the vehicle dependence behind mode choice: Evidence of motorcycle dependence in Taipei," Transportation Research Part A: policy and practice, Vol. 42, p.p. 307-320, 2008.
10
[11] C.-F. Chen and W.-T. Lai, "The effects of rational and habitual factors on mode choice behaviors in a motorcycle-dependent region: Evidence from Taiwan," Transport Policy, Vol. 18, p.p. 711-718, 2011.
11
[12] J. X. Weinert, "The rise of electric two-wheelers in China: factors for their success and implications for the future", University of California, Davis, 2007.
12
[13] N. Sheng, X. Zhou, and Y. Zhou, "Environmental impact of electric motorcycles: Evidence from traffic noise assessment by a building-based data mining technique," Science of the Total Environment, Vol. 554, p.p. 73-82, 2016.
13
[14] D. Xingdong, X. Jianmin, and W. Bo, "Traffic countermeasures research for Guangzhou city in traffic mode transferring period after motorcycle forbidden ban effect", Journal of Transportation Systems Engineering and Information Technology, Vol. 9, p.p. 145-150, 2009.
14
[15] A. H.-H. Yu and S. Pettersson, "Opportunities and threats for the electric two-wheelers in China," 10th ITS european congress, Helsinki, Finland, 2014.
15
[16] H. Afshin and V. Hoseini, "Technical, economic and executive assess to choose the best electric motorcycle according to Tehran condition (Fourth technical report-choosing electric motorcycle and its implementing strategies", Environmental office of traffic department of Tehran municipality, Vol. OE/93/01/01/1-4/04, 2014. (in Persian)
16
[17] C. R. Cherry, J. X. Weinert, and Y. Xinmiao, "Comparative environmental impacts of electric bikes in China," Transportation Research Part D: Transport and Environment, Vol. 14, p.p. 281-290, 2009.
17
[18] T. Gärling and K. W. Axhausen, "Introduction: Habitual travel choice," Transportation, Vol. 30, p.p. 1-11, 2003.
18
[19] D. Simons, P. Clarys, I. De Bourdeaudhuij, B. de Geus, C. Vandelanotte, and B. Deforche, "Why do young adults choose different transport modes? A focus group study," Transport Policy, Vol. 36, p.p. 151-159, 2014.
19
[20] W. L. Chee and J. L. Fernandez, "Factors that influence the choice of mode of transport in Penang: a preliminary analysis," Procedia-Social and Behavioral Sciences, Vol. 91, p.p. 120-127, 2013.
20
[21] I. K. Lai, Y. Liu, X. Sun, H. Zhang, and W. Xu, "Factors influencing the behavioural intention towards full electric vehicles: An empirical study in Macau," Sustainability, Vol. 7, p.p. 12564-12585, 2015.
21
[22] J. Levine and T. Morton, "The impact of automated transit, pedestrian, and bicycling facilities on urban travel patterns", Summary Report, 2015.
22
[23] A. B. Parsa and M. Habibian, "Understanding motorcyclists' behavior toward TDM policies in work tours,"Transportation Research Board 96th Annual Meeting, Washington DC, United States, 2017.
23
[24] H. Afshin and V. Hoseini, "Technical, economic and executive assess to choose the best electric motorcycle according to Tehran condition (second technical report- Technical-economic assess to choose electric motorcycle and its charging infrastructure", Environmental Office of Traffic Department of Tehran Municipality, Vol. OE/93/01/01/1-4/02, 2014. (in Persian)
24
[25] O. Petrik, F. Moura and J. Abreu e Silva, "Measuring uncertainty in discrete choice travel demand forecasting models," Transportation Research and Technology, p.p. 3-20, 2016.
25
[26] G. De Jong, A. Daly, M. Pieters, S. Miller, R. Plasmeijer and F. Hofman, "Uncertainty in traffic forecasts: Literature review and new results for the Netherlands," Transportation, Vol. 34, p.p. 375-395, 2007.
26
[27] A. M. Freund and J. O. Ritter, "Midlife crisis: A debate," Gerontology, Vol. 55, p.p. 582-591, 2009.
27
[28] M. Soderbom, "Applied econometrics," Mans, University of Gothenburg, 2009.
28
ORIGINAL_ARTICLE
کاربرد فولاد نرم بر رفتار دینامیکی مهاربندهای ضربدری در برش بخش دوم: تحلیلهای استاتیکی غیرخطی پیشرفته و دینامیکی افزایشی
در بخش اول، تئوری طراحی مهاربندهای ضربدری با گریدهای مختلف فولاد ارائه و قابهای مختلف با استفاده از تحلیلهای استاتیکی غیرخطی بررسی گردید. مشخص گردید که استفاده از فولاد نرم در مهاربندهای ضربدری منجر به افزایش سختی، کاهش دریفت سازه، جذب انرژی و میرایی بیشتر و افزایش شکلپذیری سیستم میگردد. به منظور ارزیابی کاملتر رفتار سازههای فولادی با مهاربند ضربدری در طراحی با گریدهای مختلف فولاد و در نظر گرفتن رفتار دینامیکی مهاربندها، قابهای با ارتفاعهای مختلف با استفاده از آنالیزهای استاتیکی پیشرفته غیرخطی و نیز آنالیزهای دینامیکی غیرخطی افزایشی (IDA) بررسی گردیدهاند و نتایج برای سازههای با ارتفاعات مختلف بصورت مقایسهای ارائه گردیدهاند. در انتخاب شتابنگاشتها از زلزلههای نزدیک و دور برای ارزیابی کارایی لرزهای با استفاده از پارامترهای سختی و حداکثر تغییرمکان نسبی طبقات استفاده گردیدهاند. بنابراین تحقیق حاضر میتواند منجر به ارائه راهکارهایی برای ارزیابی بهتر پارامترهای لرزهای سیستمهای طراحی شده با گریدهای مختلف گردد. آنچه از تحلیلهای انجام شده و تئوری طراحی مهاربندهای ضربدری نتیجه میشود این است که آییننامههای طراحی لرزهای ساختمانهای فولادی میتوانند اثرات استفاده از انواع مختلف فولادها را در اختصاص پارامترهای لرزهای سازهها در نظر بگیرند. نتایج بدست آمده بیانگر بهبود رفتار لرزهای سیستمهای مهاربندی طراحی شده با فولادهای از گریدهای پایینتر تحت تحلیلهای انجام شده میباشد. ضمن اینکه پاسخهای سازهها تحت زلزلههای حوزه نزدیک بزرگتر میباشد. همچنین با افزایش ارتفاع قابها و غالب شدن رفتار خمشی بر رفتار برشی و تأثیر بیشتر ستونها بر تغییرمکانهای کلی قابها، اثرات استفاده از فولاد نرم در رفتار کلی سازهها به تدریج کاسته میگردد.
https://ceej.aut.ac.ir/article_2980_c7717a5639a159c23646e38ab509522f.pdf
2021-03-21
343
366
10.22060/ceej.2018.13812.5481
مهاربند ضربدری
تحلیل استاتیکی پیشرفته غیرخطی
تحلیل دینامیکی افزایشی (IDA)
جذب انرژی
گرید فولاد
پرویز
عبادی
parviz.ebadi@gmail.com
1
گروه عمران، واحد شهرقدس، دانشگاه آزاد اسلامی، تهران، ایران
LEAD_AUTHOR
مهرداد
مرادی
moradi_omran@yahoo.com
2
کارشناس ارشد زلزله
AUTHOR
[1] C. Comartin, R. W. Niewiarowski, S. A. Freeman, F. Turner, Seismic Evaluation and Retrofit of Concrete Buildings: A Practical Overview of the ATC 40 Document, 2000.
1
[2] F.E.M. Agency, NEHRP Guidelines for the Seismic Rehabilitation of Buildings, 2000.
2
[3] S. Antoniou, R. Pinho, Development and verification of a displacement-based adaptive pushover procedure, Journal of Earthquake Engineering, 8(5) (2004) 643-661.
3
[4] S. Antoniou, R. Pinho, Advantages and limitations of adaptive and non-adaptive force-based pushover procedures, Journal of Earthquake Engineering, 8(4) (2004) 497-522.
4
[5] P. Fajfar, A Nonlinear Analysis Method for Performance‐Based Seismic Design, Earthquake Spectra, 16(3) (2000) 573-592.g20
5
[6] D. Vamvatsikos, C.A. Cornell, Incremental dynamic analysis, Earthquake Engineering & Structural Dynamics, 31(3) (2002) 491-514.
6
[7] D. Vamvatsikos, C.A. Cornell, Applied Incremental Dynamic Analysis, Earthquake Spectra, 20(2) (2004) 523-553.
7
[8] B. Asgarian, A. Sadrinezhad, P. Alanjari, Seismic performance evaluation of steel moment resisting frames through incremental dynamic analysis, Journal of Constructional Steel Research, 66(2) (2010) 178-190.
8
[9] M. Dolsek, Incremental dynamic analysis with consideration of modeling uncertainties, Earthquake Engineering & Structural Dynamics, 38(6) (2009) 805-825.
9
[10] D. Vamvatsikos, C.A. Cornell, Direct Estimation of Seismic Demand and Capacity of Multidegree-of-Freedom Systems through Incremental Dynamic Analysis of Single Degree of Freedom Approximation1, Journal of Structural Engineering, 131(4) (2005) 589-599.
10
[11] D. Vamvatsikos, M. Fragiadakis, Incremental dynamic analysis for estimating seismic performance sensitivity and uncertainty, Earthquake Engineering & Structural Dynamics, 39(2) (2010) 141-163.
11
[12] M. Mofid, P. Zarfam, B.R. Fard, On the modal incremental dynamic analysis, The Structural Design of Tall and Special Buildings, 14(4) (2005) 315-329.
12
[13] P. Zarfam, M. Mofid, On the modal incremental dynamic analysis of reinforced concrete structures, using a trilinear idealization model, Engineering Structures, 33(4) (2011) 1117-1122.
13
[14] P. Ebadi, H.R. Shokrghozar, M. Moradi, Case study on advanced nonlinear static procedures with adaptive pushover methods in analysis of steel frames with X-bracing system, in: 3th International Congress on Civil Engineering, Architecture and Urban Development, Tehran-Iran, 2015.
14
[15] B. Gupta, S. K. Kunnath, Adaptive spectra-based pushover procedure for seismic evaluation of structures, Earthquake Spectra, 16(2) (2000) 367-392.
15
[16] M. A. Hadianfard, H. Rahnema, Advanced nonlinear time-history analysis of partially restrained steel frames by using integrated equations of motion, in: The International Conference on Computing in Civil and Building Engineering, Nottingham University, 2010.
16
[17] AISC360, Specification for Structural Steel Buildings, 2010.
17
[18] AISC341, Seismic Provisions for Structural Steel Buildings, 2010.
18
[19] Nazri, F. M., Tahar, S., Saruddin, S. N. A., & Shahidan, S., Seismic Fragility Curves of Industrial Buildings by Using Nonlinear Analysis. In MATEC Web of Conferences (Vol. 103, p. 02017). EDP Sciences.
19
ORIGINAL_ARTICLE
تأثیر تزریق غیرمحرک سیلیس کلوئیدی بر مقاومت برشی ماسه کربناته بوشهر آلوده به نفت خام
نفت خام یکی از منابع آلودگی خاک و آب است که با فرآیندهای فیزیکی و شیمیایی باعث تغییر خصوصیات ژئوتکنیکی خاک میگردد. از آنجا که ماسه کربناته در مناطق نفت خیز و قارهای یافت میشود، در معرض آلودگی نفتی قرار دارد و در نتیجه، مطالعه آلوده شدن این ماسه به نفت و فراوردههای نفتی حائز اهمیت است. این پژوهش با انجام آزمایشهای سه محوری بر روی نمونههای غیراشباع به بررسی خصوصیات مقاومت برشی ماسه کربناته آلوده به نفت خام و همچنین ماسه آلودهی تحت تزریق سیلیس کلوئیدی پرداخته است. نتایج نشان داد که آلودگی نفتی منجر به کاهش مقاومت برشی حداکثر و زاویه اصطکاک ماسه کربناته گردیده است و همچنین کاهش چشمگیر مدول الاستیسیته در اثر افزایش نفت مشاهده میشود. با تزریق محلول سیلیس کلوئیدی مشاهده شد که مقاومت برشی حداکثر افزایش یافته و چسبندگی به طور قابل ملاحظهای در نمونههای تزریق شده نسبت به نمونههای آلوده به نفت افزایش یافته است. همچنین تزریق این محلول منجر به افزایش قابل توجه مدول الاستیسیته در نمونههای ماسهای آلوده به نفت شده است.
https://ceej.aut.ac.ir/article_2802_5e1937b2506c7e65c2d1c3241eb38cde.pdf
2021-03-21
367
382
10.22060/ceej.2018.13268.5363
ماسه کربناته
آلودگی نفتی
سیلیس کلوئیدی
مقاومت برشی
تثبیت غیرمحرک
علی
شاکری
ali.shakeri70@yahoo.com
1
کارشناس ارشد، دانشکده فنی و مهندسی، دانشگاه بین المللی امام خمینی (ره)، ایران
AUTHOR
رضا
ضیایی موید
reza_ziaie_moayed@yahoo.com
2
دانشیار دانشکده فنی و مهندسی، دانشگاه بین المللی امام خمینی (ره)، قزوین، ایران
LEAD_AUTHOR
محمدامین
نوذری
mohammadaminnozari@gmail.com
3
گروه مهندسی عمران، مرکز ماسال، دانشگاه آزاد اسلامی، ماسال، ایران
AUTHOR
[1] H.A. Al-Sanad, W.K. Eid, N.F. Ismael, Geotechnical properties of oil-contaminated Kuwaiti sand, Journal of geotechnical engineering, 121(5) (1995) 407-412.
1
[2] E. Shin, J. Lee, B. Das, Bearing capacity of a model scale footing on crude oil-contaminated sand, Geotechnical & Geological Engineering, 17(2) (1999) 123-132.
2
[3] V.K. Puri, Geotechnical aspects of oil-contaminated sands, Soil and Sediment Contamination, 9(4) (2000) 359-374.
3
[4] E.C. Shin, B.M. Das, Bearing capacity of unsaturated oil-contaminated sand, International Journal of offshore and polar Engineering, 11(03) (2001).
4
[5] M.M. AkbarAbadi, S.S. Yasrebi, experimental study on shear strength behavior of an unsaturated crude oil contaminated clayey sand, Tarbiat Modares University, Tehran, 2010.
5
[6] F. Wegian, M. Ismail, Assessment of bridge performance after oil contamination below foundation piles, Australian Journal of Civil Engineering, 6(1) (2010) 47-56.
6
[7] M. Vosoughi, M. Hasanlourad, The effect of oil contaminent on the shear strenght of carbonate sand, Imam Khomeini International University, Qazvin, 2014.
7
[8] S.A. Nasehi, A. Uromeihy, M.R. Nikudel, A. Morsali, Influence of gas oil contamination on geotechnical properties of fine and coarse-grained soils, Geotechnical and Geological Engineering, 34(1) (2016) 333-345.
8
[9] A. Al-Rawas, H.F. Hassan, R. Taha, A. Hago, B. Al-Shandoudi, Y. Al-Suleimani, Stabilization of oil-contaminated soils using cement and cement by-pass dust, Management of Environmental Quality: An International Journal, 16(6) (2005) 670-680.
9
[10] M. Saberian, M.M. Khabiri, Effect of oil pollution on function of sandy soils in protected deserts and investigation of their improvement guidelines (case study: Kalmand area, Iran), Environmental geochemistry and health, (2016) 1-12.
10
[11] S.A. Zomorodian, M. Shabnam, S. Armina, B.C. O'Kelly, Strength enhancement of clean and kerosene-contaminated sandy lean clay using nanoclay and nanosilica as additives, Applied Clay Science, 140 (2017) 140-147.
11
[12] H. Liao, C. Huang, B. Chao, Liquefaction resistance of a colloid silica grouted sand, in: Grouting and ground treatment, 2003, pp. 1305-1313.
12
[13] P.M. Gallagher, J.K. Mitchell, Influence of colloidal silica grout on liquefaction potential and cyclic undrained behavior of loose sand, Soil Dynamics and Earthquake Engineering, 22(9) (2002) 1017-1026.
13
[14] D. Camenzuli, D.B. Gore, Immobilization and encapsulation of contaminants using silica treatments: a review, Remediation Journal, 24(1) (2013) 49-67.
14
[15] P.P. Mbhele, Remediation of soil and water contaminated by heavy metals and hydrocarbons using silica encapsulation, 2008.
15
[16] H.E. Bergna, W.O. Roberts, Colloidal silica: fundamentals and applications, CRC Press, 2005.
16
[17] P.M. Gallagher, Y. Lin, Colloidal silica transport through liquefiable porous media, Journal of geotechnical and geoenvironmental engineering, 135(11) (2009) 1702-1712.
17
[18] J. Jurinak, L. Summers, Oilfield applications of colloidal silica gel, SPE production engineering, 6(04) (1991) 406-412.
18
ORIGINAL_ARTICLE
تعیین دقت دو مدل CDE و MIM با استفاده از روش حل معکوس در انتقال آلودگی تریکلرواتیلن (TCE) در یک محیط متخلخل کربناته
تریکلرواتیلن (TCE) یکی از آلایندههای آبهای زیرزمینی در مناطق صنعتی است؛ لذا شبیهسازی انتقال آن ضروری است. این پژوهش با روش حل معکوس به شبیهسازی انتقال TCE پرداخته است. برای شبیهسازی، از روش حل معکوس با نرمافزارهای HYDRUS-1d (حل عددی) و STANMOD (حل تحلیلی) با دو مدل انتقال آلودگی جابهجایی–انتشار املاح (CDE) و مدل روان- ساکن (MIM) استفاده شد. در این پژوهش از دادههای مقاله Yolcubal and Akyol در سه غلظت 110، 113 و 1300 میلیگرم برلیتر TCE استفاده گردید که سال 2001 در شهری از آنتالیا روی بافت خاک شنیلومی با متوسط وزن مخصوص ظاهری 3/1 گرم بر سانتیمتر مکعب انجام شده بود. آزمایشها در ستونهایی به طول 15 سانتیمتر با جنس فولاد ضدزنگ در شرایط اشباع انجام شدند و تزریق TCE تا زمان برابر شدن غلظت خروجی با غلظت ورودی ادامه داشت. در بازههای زمانی مختلف نمونههایی از خروجی ستونها برای تعیین غلظت TCE و رسم منحنی رخنه گرفته شد. نتایج حل معکوس با نرمافزار HYDRUS-1d و STANMOD نشان دادند که مدل MIM ضریب همبستگی بالاتری در برازش منحنی رخنه نسبت به مدل CDE دارد. بیشترین میزان ضریب همبستگی 97/0 در غلظت 1300 میلیگرم بر لیتر با حل معکوس تحلیلی و مدل MIM شد. کمترین میزان خطا در تخمین ضریب انتشار (D) به ترتیب صفر و 5/3 درصد در دو مدل CDE و MIM شد. درصد خطا در تخمین ضرایب ایزوترم جذب (Kd) در حل معکوس عددی و تخمین فاکتور تأخیر (R) در حل معکوس تحلیلی در غلظت 113 میلیگرم بر لیتر بیشتر از دو غلظت دیگر شد.
https://ceej.aut.ac.ir/article_2863_21ba208fb9c94ffec4028e1ef8a55b5a.pdf
2021-03-21
383
394
10.22060/ceej.2018.13256.5356
تریکلرواتیلن
حل معکوس
مدل CDE
مدل MIM
HYDRUS-1d و STANMOD
زینب
احمدی مقدم
zahmadimoghadam2014@gmail.com
1
مهندسی آب، دانشکده کشاورزی، دانشگاه شهرکرد، شهرکرد، ایران
LEAD_AUTHOR
سید حسن
طباطبائی
tabatabaei@agr.sku.ac.ir
2
گروه مهندسی آب- دانشگاه شهرکرد- شهرکرد- ایران
AUTHOR
[1] A.f.T.S.a.D.R. (ATSDR), Toxicological profile for trichloroethylene (TCE). U.S. Public Health Service, U.S. Department of Health and Human Services, Atlanta, GA, in, 1997.
1
[2] F. Abbasi, Advanced soil physics, university of Tehran, 2014.
2
[3] J. Simunek, M. Sejnan, M.T. Genuchten, The HYDRUS-1D software package for simulating the one-dimensional movement of water, heat, and multiple solute in variably saturated media, Version 2.0 IGWMC-TPS-70, in: Int. Ground Water Modeling Center, Colorado School of Mines, Golden, Co., 1998.
3
[4] F. Casey, J. Simunek, Inverse Analyses of Transport of Chlorinated Hydrocarbons Subject to Sequential Transformation Reactions, Environ. Qual, 30 (2001) 1354-1360.
4
[5] T. Masipan, s. Chotpantarat, S. Boonkaewwan, Experimental and modelling investigations of tracer transport in variably saturated agricultural soil of Thailand: Column study. Sustainable, Environment Research Vol. 26 (2016) PP. 97-101.
5
[6] M. Moradzadeh, H. Moazed, G. Sayyad, Simulation of Nitrate Ion Leaching in a Sandy Loam Soil Treated with Zeolite Using Hydrus-1D Model, water and soil science 23(1) (2013) 95-107.
6
[7] H. Shiran, M. Kord, G.A. Sayyad, H. Naghavi, Simulating bromide transport in disturbed soil columns using HYDRUS-1D model, Watershed Management Research (92) (2011) 20-31.
7
[8] E. Chavoshi1, M. Afyuni2, M.A. Hajabbasi, Simulation of Fluoride Transport in a Calcareous Soil Using HYDRUS-1D, Sci. & Technol. Agric. & Natur. Resour., Water and Soil Sci, 19(72) (2015) 205-215.
8
[9] J. Chaerlakens, D. Mallants, J. Simunek, M.T.V. Genuchten, J. Feyan, Numerical simulation of transport and sequential biodegradation of chlorinated aliphatic hydrocarbons using CHAIN-2D, Hydrological processes 13 (1999) 2847-2859.
9
[10] R.G. Riley, J.E. Szecsody, A.V. Mitroshkov, C.F. Brown, Desorption Behavior of Trichloroethene and Tetrachloroethenein U.S. Department of Energy Savannah River Site Unconfined Aquifer Sediments, 2006.
10
[11] N.H. Akyol, I. Yolcubal, D.I. Yüksel, Sorption and transport of trichloroethylene in caliche soil Chemosphere, 82(6) (2011) 809-816.
11
[12] G. Tang, M. Mayes, J. Parker, X. Yin, D. Watson, P. Jardine, Improving parameter estimation for column experiments by multi-model evaluation and comparison, Hydrology, 376 (2009) 567-578.
12
[13] F. Ghaemizadeh, H. Banejad, O. Bahmani, Cadmium Transport Simulation under Different Soil Conditions Using the Physical Non-Equilibrium Model, water and soil science 24(4) (2013) 29-44.
13
ORIGINAL_ARTICLE
مطالعه تجربی انتقال ارتعاشات از میز لرزان به محیط پیرامونی
اندرکنش پی میزلرزه با خاک بر دقت عملکردی آن مؤثر بوده و در صحت نتایج آزمایشها برروی میز تأثیرگذار است. برای شناسایی این رفتار، دانستن پارامترهای دینامیکی این سیستم ارتعاشی لازم بوده و در این راستا استفاده از مطالعات تجربی یک راهکار مناسب تشخیص داده شدهاست. با استفاده از این روش عدم قطعیتهای موجود در عملکرد میزلرزه به سبب وجود اندرکنشهای گفته شده نیز این سیستم ارتعاشی در حین بهرهبرداری کاهش مییابد. در این تحقیق به شرح یک آزمایش ارتعاش اجباری انجام شده برروی پی میز لرزان شش درجه آزادی پژوهشگاه بینالمللی زلزلهشناسی و مهندسی زلزله اقدام گردیده است. در این آزمایش دادهبرداری از ارتعاشات انتقال یافته به محیط اطراف پی نیز صورت پذیرفته و با استفاده از نتایج حاصل از آن چگونگی انتقال ارتعاشات از میز به محیط مجاور ارزیابی گردیده است. همچنین از دادههای ثبت شده به روی پی برای شناسایی پارامترهای دینامیکی سیستم خاک و پی نیز استفاده شده است. بر مبنای نتایج این تحقیق دامنه ارتعاشات انتقال یافته از پی به محیط اطراف با افزایش فاصله از لبه پی به سرعت کاهش مییابد. همچنین نشان داده شده است که این کاهش دامنه ارتعاشات انتقالی در خصوص ارتعاشات افقی و قائم دارای روند یکسانی نیستند. علاوه بر آن نتایج به دست آمده در خصوص انتقال ارتعاشات ناشی از تحریک پی در خارج از فرکانس طبیعی به محیط پیرامونی آن حاکی از تغییرات قابل توجه در محتوای فرکانسی ارتعاشات انتقال یافته به خاک برحسب فاصله از مرکز تحریک است.
https://ceej.aut.ac.ir/article_2878_e9b7c9d7b92333152fc234b27aed5c32.pdf
2021-03-21
395
410
10.22060/ceej.2018.13126.5331
میز لرزان
انتقال ارتعاشات
پارامترهای دینامیکی خاک
فرزانه
نباتی
farzanehnabati@yahoo.com
1
پژوهشکده سازه، پژوهشگاه بین المللی زلزله شناسی و مهندس زلزله، تهران ، ایران
AUTHOR
منصور
ضیایی فر
mansour@iiees.ac.ir
2
دانشیار پژوهشکده سازه پژوهشگاه بین المللی زلزله شناسی و مهندسی زلزله
LEAD_AUTHOR
[1] Luco, J. E, Ozcelik, O., Conte, J. P., & Mendoza, L. "Experimental study of the dynamic interaction between the foundation of the NEES/UCSD Shake Table and the surrounding soil: Reaction block response." Soil Dynamics and Earthquake Engineering 31.7 (2011): 954-953.
1
[2] Soltani, Behroz. Soil-structure interaction in massive foundations. M.S. Thesis. International Institute of Earthquake Engineering and Seismology, 2015.
2
[3] Wolf, John P. Dynamic Soil-Structure Interaction. Vol. 1. Englewood: Prentice-Hall, 1985.
3
[4] Nabati, Farzaneh. Sensitivity analysis of a shaking table subjected to interaction with surrounding environment. M.S. Thesis. International Institute of Earthquake Engineering and Seismology, 2015.
4
[5] Clough, R. W., and Penzien, J., Dynamics of Structures, Second Edition, McGraw-Hill. Inc., New York, NY, 1993.
5
ORIGINAL_ARTICLE
بررسی تأثیر نوع اتصال شمع به کلاهک شمع در ماسه روانگرا
نوع اتصال شمع به کلاهک در پیهای شمعی که به صورت گروهی مورد استفاده قرار میگیرند از جمله موضوعاتی است که در مهندسی ژئوتکنیک همواره مطرح بوده است. در این مقاله، مقایسه بین رفتار گروه شمع با دو نوع اتصال شمع به کلاهک گیردار و مفصلی صورت گرفته و پاسخ لرزهای گروه شمع با نیروی برشی، نیروی محوری، جابهجایی قائم، جابهجایی افقی و گشتاور خمشی در طول شمع سنجیده شده است. برای این منظور تحلیل سه بعدی دینامیکی تحت بار زلزله در نرمافزار اجزای محدود ANSYS استفاده شده و نتایج حاصله با یکدیگر مقایسه شده است. در نهایت مقایسه رفتار گروه شمع در دو حالت بررسی شده نشان میدهد اتصال مفصلی برای حداقل نمودن تغییرمکان قائم و اتصال گیردار برای حداقل نمودن نیروی برشی و محوری و لنگر خمشی مناسب است.
https://ceej.aut.ac.ir/article_1956_35607b09a9914e0ee3fe87f0147f4cdc.pdf
2021-03-21
411
418
10.22060/ceej.2017.11338.5008
شمع
کلاهک
تحلیل دینامیکی
روانگرا
حمیدرضا
صبا
hr.saba@aut.ac.ir
1
استادیار دانشکده عمران دانشگاه تفرش
LEAD_AUTHOR
محمد
صالحی
msalehi.civil7@gmail.com
2
دانشگاه تفرش
AUTHOR
مسعود
بنی اسدی
mr_bsad@yahoo.com
3
دانشگاه تفرش
AUTHOR
[1] Seed, H. B; (1796) “Evaluation of soil liquefaction effects on level ground during earthquake”, Liquefaction Problems in Geotechnical Engineering, ASCE Annual Convention and Exposition, 1-104.
1
[2] Finn, W. D. L., Fujita, N; “Piles in liquefiable soils: seismic analysis and design issues”, Soil Dynamics and Earthquake Engineering, 22(2002), 931-942.
2
[3] کوه گرد، محمود؛ "بررسی عددی پی های شمعی تحت بار قائم"، پایان نامه کارشناسی ارشد، دانشگاه اراک، 1390. [4] اسمعیلی فلک، مهرزاد؛ "بررسی تأثیر اتصال سر و نوک ریزشمع بر رفتار لرزهای در محیط الاستیک"، همایش منطقه ای مهندسی عمران، دانشگاه ملایر، 1391.
3
]5[ صبا، حمیدرضا؛ "تحلیلسهبعدیاستاتیکیودینامیکیگروهشمعقائمبالحاظکردناثراتاندرکنشسینماتیکخاکوشمع"، ششمین گنگره ملی مهندسی عمران، سمنان، 1390.
4
[6] Ansys/Help.
5
[7] صیادپورسی سخت، هادی؛ حلبیان، امیرمهدی؛ "تأثیر روانگرایی بر پاسخ لرزهای گروه شمع"، چهارمین کنگره ملی مهندسی عمران، دانشگاه تهران، اردیبهشت 1387.
6