ORIGINAL_ARTICLE
تحلیل پایداری شبیه سازی هیبرید زمان- واقعی سازه چند طبقه بر اساس تأخیر زمانی عملگر هیدرولیکی
شبیه سازی هیبرید زمان- واقعی )RTHS )نوعی شبیهسازی است که در آن یک قسمت واقعی از یک سازه در کنار شبیه سازی زمان- واقعی بقیه اجزای آن سازه تست می شود. در این مقاله یک ساختمان با سازه چند طبقه به بخش های عددی و واقعی تقسیم شده و رفتار ارتعاشی طبقات واقعی در میان شبیه سازی عددی بقیه طبقات بررسی می شود. برای اعمال اثر نیرو و اینرسی ناشی از بقیه طبقات به طبقه واقعی مورد نظر، از یک عملگر الکترو هیدرولیکی استفاده می شود. دینامیک عملگر هیدرولیکی را می توان با یک تأخیر زمانی تقریب زد و این تأخیر زمانی در حلقه بسته شبیه سازی می تواند باعث کاهش دقت و یا ناپایداری سیستم گردد. بنابراین از معادالت دیفرانسیل تأخیری )DDE ) برای تعیین تأخیر زمانی بحرانی وابسته به پارامترهای سیستم استفاده می شود. نتایج حاصل از شبیه سازی بیانگر تأثیر پارامترهای بدون بعد و پارتیشن بندی سازه در پایداری شبیه سازی هیبرید است.
https://ceej.aut.ac.ir/article_2911_8137016bffcc3e843b4f3894bfce2d70.pdf
2019-08-23
391
400
10.22060/ceej.2018.13547.5433
شبیه سازی هیبرید زمان - واقعی
عملگر هیدرولیکی
تأخیر زمانی
پایداری
سازه
مصطفی
نصیری
nasiri@gut.ac.ir
1
دانشگاه گلپایگان
LEAD_AUTHOR
علی
صافی
ali.safi@gmail.com
2
دانشگاه گلپایگان
AUTHOR
[1] Saouma V, Sivaselvan M. Hybrid simulation: Theory, im- plementation and applications: CRC Press; 2014.
1
[2] Wallace M, Wagg D, Neild S. An adaptive polynomial based forward prediction algorithm for multi-actuator real- time dynamic substructuring. Proceedings of the Royal So- ciety A: Mathematical, Physical and Engineering Sciences. 2005;461(2064):3807-26.
2
[3] Tu J-Y, Hsiao W-D, Chen C-Y. Modelling and control is- sues of dynamically substructured systems: adaptive forward prediction taken as an example. Proceedings of the Royal So- ciety A: Mathematical, Physical and Engineering Sciences. 2014;470(2168):20130773.
3
[4] Zhou H, Wagg DJ, Li M. Equivalent force control com- bined with adaptive polynomial‐based forward prediction for real‐time hybrid simulation. Structural Control and Health Monitoring. 2017;24(11):e2018.
4
[5] Reinhorn A, Sivaselvan M, Weinreber S, Shao X. Real-time dynamic hybrid testing of structural systems. 2004.
5
[6] Gawthrop P, Virden D, Neild S, Wagg D. Emulator-based control for actuator-based hardware-in-the-loop testing. Con- trol Engineering Practice. 2008;16(8):897-908.
6
[7] Horiuchi T, Konno T. A new method for compensat- ing actuator delay in real–time hybrid experiments. Philo- sophical Transactions of the Royal Society of London Se-ries A: Mathematical, Physical and Engineering Sciences. 2001;359(1786):1893-909.
7
[8] Jung RY, Benson Shing P. Performance evaluation of a real‐time pseudodynamic test system. Earthquake engineering & structural dynamics. 2006;35(7):789-810.
8
[9] Chen C, Ricles JM. Improving the inverse compensation method for real‐time hybrid simulation through a dual com- pensation scheme. Earthquake Engineering & Structural Dy- namics. 2009;38(10):1237-55.
9
[10] Carrion JE, Spencer Jr BF. Model-based strategies for re- al-time hybrid testing. Newmark Structural Engineering Labo- ratory. University of Illinois at Urbana …; 2007. Report No.: 1940-9826.
10
[11] Chen C, Ricles JM. Tracking error-based servohydraulic actuator adaptive compensation for real-time hybrid simula- tion. Journal of Structural Engineering. 2010;136(4):432-40.
11
[12] Gao X, Castaneda N, Dyke SJ. Real time hybrid simu- lation: from dynamic system, motion control to experimen- tal error. Earthquake Engineering & Structural Dynamics. 2013;42(6):815-32.
12
[13] Ou G, Ozdagli AI, Dyke SJ, Wu B. Robust integrated ac- tuator control: experimental verification and real‐time hybrid‐ simulation implementation. Earthquake Engineering & Struc- tural Dynamics. 2015;44(3):441-60.
13
[14] Phillips BM, Takada S, Spencer Jr B, Fujino Y. Feedfor- ward actuator controller development using the backward-dif- ference method for real-time hybrid simulation. Smart Struc- tures and Systems. 2014;14(6):1081-103.
14
[15] Newmark NM, editor A method of computation for struc- tural dynamics1959: American Society of Civil Engineers.
15
[16] Wu B, Xu G, Wang Q, Williams MS. Operator‐splitting method for real‐time substructure testing. Earthquake Engi- neering & Structural Dynamics. 2006;35(3):293-314.
16
[17] Combescure D, Pegon P. α-Operator splitting time inte- gration technique for pseudodynamic testing error propaga- tion analysis. Soil Dynamics and Earthquake Engineering. 1997;16(7-8):427-43.
17
[18] Chang S-Y. Explicit pseudodynamic algorithm with unconditional stability. Journal of Engineering Mechanics. 2002;128(9):935-47.
18
[19] Wu B, Wang Q, Benson Shing P, Ou J. Equivalent force control method for generalized real‐time substructure testing with implicit integration. Earthquake engineering & structural dynamics. 2007;36(9):1127-49.
19
[20] Chen C, Ricles JM. Development of direct integration al- gorithms for structural dynamics using discrete control theory. Journal of Engineering Mechanics. 2008;134(8):676-83.
20
[21] Gui Y, Wang J-T, Jin F, Chen C, Zhou M-X. Develop- ment of a family of explicit algorithms for structural dy- namics with unconditional stability. Nonlinear Dynamics. 2014;77(4):1157-70.
21
[22] Chung J, Hulbert G. A time integration algorithm for structural dynamics with improved numerical dissipation: the generalized-α method. 1993.
22
[23] Kolay C, Ricles JM, Marullo TM, Mahvashmohammadi
23
A, Sause R. Implementation and application of the uncondi- tionally stable explicit parametrically dissipative KR‐α method for real‐time hybrid simulation. Earthquake Engineering & Structural Dynamics. 2015;44(5):735-55.
24
[24] Ahmadizadeh M, Mosqueda G, Reinhorn A. Compensa- tion of actuator delay and dynamics for real‐time hybrid struc- tural simulation. Earthquake Engineering & Structural Dynam- ics. 2008;37(1):21-42.
25
[25] Darby A, Williams M, Blakeborough A. Stability and de- lay compensation for real-time substructure testing. Journal of Engineering Mechanics. 2002;128(12):1276-84.
26
[26] Wu B, Wang Z, Bursi OS. Actuator dynamics compen- sation based on upper bound delay for real‐time hybrid sim- ulation. Earthquake Engineering & Structural Dynamics. 2013;42(12):1749-65.
27
[27] Shi P, Wu B, Spencer Jr BF, Phillips BM, Chang CM. Real‐time hybrid testing with equivalent force control meth- od incorporating Kalman filter. Structural Control and Health Monitoring. 2016;23(4):735-48.
28
[28] Horiuchi T, Inoue M, Konno T, Namita Y. Real‐time hybrid experimental system with actuator delay compensation and its application to a piping system with energy absorber. Earth- quake Engineering & Structural Dynamics. 1999;28(10):1121- 41.
29
[29] Wallace M, Sieber J, Neild SA, Wagg DJ, Krauskopf B. Stability analysis of real‐time dynamic substructuring using delay differential equation models. Earthquake engineering & structural dynamics. 2005;34(15):1817-32.
30
[30] Kyrychko Y, Blyuss K, Gonzalez-Buelga A, Hogan S, Wagg D. Real-time dynamic substructuring in a coupled os- cillator–pendulum system. Proceedings of the Royal Soci- ety A: Mathematical, Physical and Engineering Sciences. 2006;462(2068):1271-94.
31
[31] Mercan O, Ricles JM. Stability analysis for real‐time pseudodynamic and hybrid pseudodynamic testing with mul- tiple sources of delay. Earthquake Engineering & Structural Dynamics. 2008;37(10):1269-93.
32
[32] Chi F, Wang J, Jin F. Delay-dependent stability and added damping of SDOF real-time dynamic hybrid testing. Earth- quake Engineering and engineering vibration. 2010;9(3):425- 38.
33
[33] Botelho RM, Christenson RE. Robust stability and per- formance analysis for multi-actuator real-time hybrid substruc- turing. Dynamics of Coupled Structures, Volume 4: Springer; 2015. p. 1-7.
34
[34] Chen C, Ricles JM. Stability analysis of SDOF real‐time
35
hybrid testing systems with explicit integration algorithms and actuator delay. Earthquake Engineering & Structural Dynam- ics. 2008;37(4):597-613.
36
[35] Zhu F, Wang JT, Jin F, Chi FD, Gui Y. Stability analysis of MDOF real‐time dynamic hybrid testing systems using the discrete‐time root locus technique. Earthquake Engineering & Structural Dynamics. 2015;44(2):221-41.
37
[36] Maghareh A, Dyke SJ, Prakash A, Bunting GB. Estab
38
lishing a predictive performance indicator for real‐time hybrid simulation. Earthquake Engineering & Structural Dynamics. 2014;43(15):2299-318.
39
[37] Maghareh A, Dyke S, Rabieniaharatbar S, Prakash A. Pre- dictive stability indicator: a novel approach to configuring a real‐time hybrid simulation. Earthquake Engineering & Struc- tural Dynamics. 2017;46(1):95-116.
40
ORIGINAL_ARTICLE
تاثیر زلزله های حوزه نزدیک بر رفتار امواج سطحی مخازن ذخیره مایعات بتنی مستطیلی
یکی از مهمترین اجزای سامانه های آبرسانی، مخازن ذخیره مایعات است. به هنگام وقوع زلزله، اندرکنش آب و سازه در مخازن ذخیره مایعات و پدیده حرکت سطح آزاد سیال تاثیر قابل ملاحظهای بر مقادیر پاسخ سازه دارد. با توجه به اهمیت اثرات زلزلههای حوزه نزدیک و تاثیر آنها بر رفتار لرزهای و بارهای وارد به سازه-ها، در این مطالعه، نحوه حرکت امواج سطحی و ارتفاع آنها در مخازن مستطیلی بتنی در حالت دو بعدی تحت زلزلههای حوزه دور و نزدیک با استفاده از روش عددی مورد بررسی قرار گرفته است. اثر ابعاد مخزن، عمق آب و مشخصات زلزله بر حداکثر ارتفاع موج سطحی با لحاظ نمودن 9 تیپ مخزن و 10 رکورد زلزله حوزه دور و نزدیک انجام میگیرد. بر اساس نتایج حاصل از این مطالعه، میانه مقادیر حداکثر ارتفاع نوسانات سطح سیال در زلزلههای حوزه نزدیک نسبت به حوزه دور افزایش قابل توجّهی دارد به گونهای که متوسط این افزایش ارتفاع در مخازن به طول 20، 40 و 60 متر به ترتیب 65، 77 و 100 درصد است. همچنین با افزایش عمق سیال و عرض مخزن، میانه حداکثر ارتفاع نوسانات به ترتیب افزایش و کاهش مییابد. در مخازن تحت زلزلههای حوزه دور، ارتفاع نوسانات مایع بیشترین همبستگی را با پارامتر ARIAS و در مخازن تحت زلزلههای حوزه نزدیک با پارامتر PGV نشان داد. با توجه به نتایج این تحقیق میتوان ضرایب اصلاحی برای روابط ارائه شده در آییننامهها پیشنهاد داد که اثرات زلزله های حوزه نزدیک را در محاسبه حداکثر ارتفاع نوسانات سیال در نظر گیرند.
https://ceej.aut.ac.ir/article_2902_af6ad34ca7cf724170911d7a1fb66192.pdf
2019-08-23
401
414
10.22060/ceej.2018.13553.5435
مخازن آب
اندرکنش آب و سازه
نوسانات سطح سیال
روش لاگرانژی
رفتار لرزهای
محمدرضا
مردی پیرسلطان
mohamadrezamardi@yahoo.com
1
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه بینالمللی امام خمینی (ره).
AUTHOR
فواد
کیلانه ئی
kilanehei@eng.ikiu.ac.ir
2
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه بین المللی امام خمینی (ره)
LEAD_AUTHOR
بنیامین
محبی
mohebi@eng.ikiu.ac.ir
3
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه بینالمللی امام خمینی (ره)
AUTHOR
[1] L.M. Hoskins, L.S. Jacobsen, Water pressure in a tank caused by a simulated earthquake, Bulletin of the Seismological Society of America, 24(1) (1934) 1-32.
1
[2] L.G. Olson, K.-J. Bathe, Analysis of fluid-structure interac- tions. a direct symmetric coupled formulation based on the fluid velocity potential, Computers & Structures, 21(1) (1985) 21- 32.
2
[3] E. Kock, L. Olson, Fluid‐structure interaction analysis by the finite element method–a variational approach, International journal for numerical methods in engineering, 31(3) (1991) 463- 491.
3
[4] Y. Calayir, A. Dumanoǧlu, Static and dynamic analysis of flu- id and fluid-structure systems by the Lagrangian method, Com- puters & structures, 49(4( (1993( 625-632.
4
[5] A. Doǧangün, A. Durmuş, Y. Ayvaz, Static and dynamic anal- ysis of rectangular tanks by using the lagrangian fluid finite ele-
5
ment, Computers & Structures, 59(3) (1996) 547-552.
6
[6] A. Dogangun, R. Livaoglu, Hydrodynamic pressures acting on the walls of rectangular fluid containers, Structural Engineer- ing and Mechanics, 17(2) (2004) 203-214.
7
[7] G.W. Housner, Dynamic pressures on accelerated fluid con- tainers, Bulletin of the Seismological Society of America, 47(1) (1957) 15-35.
8
[8] G.W. Housner, The dynamic behavior of water tanks, Bulletin of the Seismological Society of America, 53(2) (1963) 381-387.
9
[9] J.Z. Chen, M.R. Kianoush, Generalized SDOF system for dynamic analysis of concrete rectangular liquid storage tanks: ef- fect of tank parameters on response, Canadian Journal of Civil Engineering, 37(2) (2010) 262-272.
10
[10] S. Hashemi, M.M. Saadatpour, M.R. Kianoush, Dynamic behavior of flexible rectangular fluid containers, Thin-Walled Structures, 66(Supplement C) (2013) 23-38.
11
[11] S.M. Hasheminejad, M. Mohammadi, M. Jarrahi, Liquid sloshing in partly-filled laterally-excited circular tanks equipped with baffles, Journal of Fluids and Structures, 44 (2014( 97-114.
12
[12] R. Moradi, F. Behnamfar, S. Hashemi, Mechanical model for cylindrical flexible concrete tanks undergoing lateral excita- tion, Soil Dynamics and Earthquake Engineering, 106 (2018) 148-162.
13
[13] L. Khezzar, A. Seibi, A. Goharzadeh, Water Sloshing in Rectangular Tanks–An Experimental Investigation & Numeri- cal Simulation, International Journal of Engineering (IJE), 3(2) (2009) 174.
14
[14] P.K. Panigrahy, U.K. Saha, D. Maity, Experimental studies on sloshing behavior due to horizontal movement of liquids in baffled tanks, Ocean Engineering, 36(3( (2009( 213-222.
15
[15] S.M. Zahrai, S. Abbasi, B. Samali, Z. Vrcelj, Experimen- tal investigation of utilizing TLD with baffles in a scaled down 5-story benchmark building, Journal of Fluids and Structures, 28 (2012) 194-210.
16
[16] S.K. Nayak, K.C. Biswal, Fluid damping in rectangular tank fitted with various internal objects–An experimental investiga- tion, Ocean Engineering, 108 (2015) 552-562.
17
[17] I. Cho, M. Kim, Effect of dual vertical porous baffles on sloshing reduction in a swaying rectangular tank, Ocean Engi- neering, 126 (2016) 364-373.
18
[18] M.-A. Xue, J. Zheng, P. Lin, X. Yuan, Experimental study on vertical baffles of different configurations in suppressing sloshing pressure, Ocean Engineering, 136 (2017) 178-189.
19
[19] D. Liu, P. Lin, A numerical study of three-dimensional liq- uid sloshing in tanks, Journal of Computational physics, 227(8) (2008) 3921-3939.
20
[20] Y.G. Chen, K. Djidjeli, W.G. Price, Numerical simulation of liquid sloshing phenomena in partially filled containers, Comput- ers & Fluids, 38(4) (2009) 830-842.
21
[21] A.R. Ghaemmaghami, M.R. Kianoush, Effect of Wall Flex- ibility on Dynamic Response of Concrete Rectangular Liquid Storage Tanks under Horizontal and Vertical Ground Motions, Journal of Structural Engineering, 136(4) (2010) 441-451.
22
[22] L. Hou, F. Li, C. Wu, A numerical study of liquid sloshing in a two-dimensional tank under external excitations, Journal of Marine Science and Application, 11(3) (2012) 305-310.
23
[23] H. Saghi, M.J. Ketabdari, Numerical simulation of sloshing in rectangular storage tank using coupled FEM-BEM, Journal of Marine Science and Application, 11(4) (2012) 417-426.
24
[24] A. Vakilaadsarabi, M. Miyajima, K. Murata, Study of the Sloshing of Water Reservoirs and Tanks due to Long Period and Long Duration Seismic Motions, in: Procerdings of the 15th World Conference on Earthquake Engineering. Lisbon, Portugal, 2012.
25
[25] S. Nicolici, R. Bilegan, Fluid structure interaction modeling of liquid sloshing phenomena in flexible tanks, Nuclear Engi- neering and Design, 258 (2013) 51-56.
26
[26] K.K. Mandal, D. Maity, Nonlinear finite element analysis of elastic water storage tanks, Engineering Structures, 99 (2015( 666-676.
27
[27] M.A. Goudarzi, P.N. Danesh, Numerical investigation of a vertically baffled rectangular tank under seismic excitation, Jour- nal of Fluids and Structures, 61 (2016) 450-460.
28
[28] S.K. Nayak, K.C. Biswal, Nonlinear seismic response of a partially-filled rectangular liquid tank with a submerged block, Journal of Sound and Vibration, 368 (2016) 148-173.
29
[29] M. Yazdanian, S. Razavi, M. Mashal, Seismic analysis of rectangular concrete tanks by considering fluid and tank interac- tion, Journal of Solid Mechanics, 8(2) (2016) 435-445.
30
[30] V. Sanapala, M. Rajkumar, K. Velusamy, B. Patnaik, Nu- merical simulation of parametric liquid sloshing in a horizontally baffled rectangular container, Journal of Fluids and Structures, 76 (2018) 229-250.
31
[31] M.E. Kalogerakou, C.A. Maniatakis, C.C. Spyrakos, P.N. Psarropoulos, Seismic response of liquid-containing tanks with emphasis on the hydrodynamic response and near-fault phenom-
32
ena, Engineering Structures, 153 (2017) 383-403.
33
[32] B. Bolt, ‘San Fernando earthquake 1971. Magnitude, aftershocks and fault dynamics, Bulletin, 196 (1975) California Division of Mines and Geology, Sacramento, Chapter 21.
34
[33] ANSYS-Inc, ANSYS software (version 14.0), Global headquarters, Canonsburg, Cennsylvania, (2016).
35
[34] M.A. Goudarzi, S.R. Sabbagh-Yazdi, W. Marx, Inves- tigation of sloshing damping in baffled rectangular tanks subjected to the dynamic excitation, Bulletin of Earth- quake Engineering, 8(4) (2010) 1055-1072.
36
[35] A.C. 350, Seismic Design of Liquid-containing Concrete Structures (ACI 350.3-06(: An ACI Standard, American Concrete Institute, 2006.
37
J.W. Baker, Quantitative classification of near-fault ground motions using wavelet analysis, Bulletin of the Seismological Society of America, 97(5) (2007) 1486- 1501
38
[37] S. No, 2800-05. Iranian code of practice for seismic resistant design of buildings, Third Revision, Building and Housing Research Center, Tehran, Iran, (2005).
39
[38] F.E.M. Agency, Quantification of Building Seismic Performance Factors, in, FEMA P695, Washington, DC, 2009.
40
[39] T.D. Ancheta, R.B. Darragh, J.P. Stewart, E. Seyhan, W.J. Silva, B.S.-J. Chiou, K.E. Wooddell, R.W. Graves, A.R. Kottke, D.M. Boore, T. Kishida, J.L. Donahue, NGA-West2 Database, Earthquake Spectra, 30(3( (2014( 989-1005.
41
[40] F.A. Charney, American Society of Civil Engineers., ebrary Inc., Seismic loads guide to the seismic load provisions of ASCE 7-05, in, ASCE Press, Reston, VA, 2010, pp. xiii, 233 p.
42
ORIGINAL_ARTICLE
مطالعه آزمایشگاهی و عددی خرابی در سنگ گرانیتی با استفاده از تانسور ترک مرتبه دوم
یکــی از رویکردهــای مــورد اســتفاده در بررســی اثــرات تــرک بــر رفتــار محیــط ناپیوســته ســنگی، مطالعــه بــر روی محیـط پیوسـته معـادل محیـط ترک خـورده میباشـد. از جملـه ایـن روش هـا، روش مبتنـی بـر تانسـور تـرک اسـت کـه اثـرات هندســی حضــور ترک هــا شــامل انــدازه، امتــداد، و چگالــی عــددی آنهــا را در بــر می گیــرد. نوشــته حاضــر بــه رویکــرد جدیــد تعییـن تانسـور تـرک از مرتبـه دوم بـا اسـتفاده از آزمایشـات تعییـن سـرعت مـوج طولـی در محیـط پرداختـه و نیـز بـر نقـش آن در تسـهیل بررسـیها به عنـوان یـک رویکـرد جایگزیـن بـرای برداشـت های صحرایـی و نیـز مدل سـازی های عـددی کارا تا کیــد دارد. ماتریس هــای ســاختاری به دســت آمده در نوشــتار حاضــر امــکان بررســی رفتــار محیــط ناپیوســته ســنگی را بــا اسـتفاده از مدل سـازی عـددی بـر پایـه روش المـان محـدود در محیـط Matlab فراهـم سـاختند کـه نتایـج آن از تطابـق قابـل قبولـی بـا داده هـای آزمایشـگاه برخـوردار بـود. بدیهـی اسـت کـه بهبـود دقـت محاسـبات از طریـق افزایـش تعـداد نمونه هـای آزمایشــگاهی و به کارگیــری نتایــج حاصــل در برنامــه کامپیوتــری امکانپذیــر می باشــد.
https://ceej.aut.ac.ir/article_2762_ab7bcba4a1e7d54c116a76a1595daffa.pdf
2019-08-23
415
424
10.22060/ceej.2017.13575.5441
روش المان محدود
آزمایش تعیین سرعت موج طولی
تانسور ترک
سنگ گرانیتی
Matlab
کامران
پناغی
k.panaghi@modares.ac.ir
1
دانشگاه تربیت مدرس
AUTHOR
علی اکبر
گلشنی
golshani@modares.ac.ir
2
دانشگاه تربیت مدرس
LEAD_AUTHOR
[1] R.E. Goodman, R.L. Taylor, T.L. Brekke, A model for the me- chanics of jointed rock, Journal of Soil Mechanics & Foundations Div, 1968.
1
[2] P. Cundall, A computer model for simulating systems, in:Proc. Symp. On Rock Fracture (ISRM), Nancy:[sn], 1971.
2
[3] G.H. Shi, R.E. Goodman, Two dimensional discontinuous deformation analysis, International Journal for Numerical and Analytical Methods in Geomechanics, 9(6), pp. 541-556, 1985.
3
[4] B. Singh, Continuum characterization of jointed rock masses: Part I—The constitutive equations, in: International Journal of Rock Mechanics and Mining Sciences & Geomechanics Ab- stracts, Elsevier, pp. 311-335, 1973.
4
[5] T. Kyoya, Y. Ichikawa, T. Kawamoto, An application of damage tensor for estimating mechanical properties of rock mass,Journal of the Japan Society of Civil Engineers, pp. 27-35, 1985.
5
[6] T. Sasaki, R. Yoshinaka, F. Nagai, A study of the multiple yield models on jointed rock mass by finite element method, in: Proceedings-Japan Society of Civil Engineers, pp. 59-59, 1994.
6
[7] A. Hojo, M. Nakamura, Y. Uchita, S. Sakurai, A design meth- od of rock bolts in jointed rock masses, in: Proceedings-Japan Society of Civil Engineers, pp. 143-154, 1996.
7
[8] H. Yoshida, H. Horii, Micromechanics-based continuum model for rock masses and analysis of the excavation of under- ground power cavern, in: Proceedings-Japan Society of Civil En- gineers, pp. 23-42, 1996.
8
[9] Y. Tasaka, H. Uno, T. Omori, K. Kudoh, Numerical analy- sis of underground powerhouse excavation considering strain softening and failure of joints, in: Proceedings of the 10th Japan Symposium on Rock Mechanics, pp. 575-580, 1998.
9
[10] M. Oda, Fabric tensor for discontinuous geological materi- als, Soil Found., 22(4), pp. 96-108, 1982.
10
[11] M. Oda, Permeability tensor for discontinuous rock masses, Geotechnique, 35(4), pp. 483-495, 1985.
11
[12] A. Rouleau, J. Gale, Statistical characterization of the frac- ture system in the Stripa granite, Sweden, in: International Jour- nal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Elsevier, pp. 353-367, 1985.
12
[13] M. Oda, Y. Hatsuyama, Y. Ohnishi, Numerical experiments on permeability tensor and its application to jointed granite at Stripa mine, Sweden, Journal of Geophysical Research: Solid Earth, 92(B8), pp. 8037-8048, 1987.
13
[14] T. Takemura, M. Oda, Stereology-based fabric analysis of microcracks in damaged granite, Tectonophysics, 387(1), pp.131- 150, 2004.
14
[15] T. Takemura, M. Oda, H. Kirai, A. Golshani, Microstructural based time-dependent failure mechanism and its relation to geo- logical background, International Journal of Rock Mechanics and Mining Sciences, 53, pp. 76-85, 2012.
15
[16] M. Oda, K. Suzuki, T. Maeshibu, Elastic compliance for rock-like materials with randon cracks, Soil Found., 24(3), pp. 27-40,1984.
16
[17] T. Takemura, A. Golshani, M. Oda, K. Suzuki, Preferred ori- entations of open microcracks in granite and their relation with anisotropic elasticity, International Journal of Rock Mechanics and Mining Sciences, 40(4), pp. 443-454, 2003.
17
[18] A. Golshani, M. Oda, Y. Okui, T. Takemura, E. Munkhtogoo, Numerical simulation of the excavation damaged zone around an opening in brittle rock, International Journal of Rock Mechanics and Mining Sciences, 44(6), pp. 835-845, 2007.
18
[19] K. Panaghi, A. Golshani, T. Takemura, Rock failure assess- ment based on crack density and anisotropy index variations dur-
19
ing triaxial loading tests, Geomechanics and Engineering, 9(6), pp. 793-813, 2015.
20
[20] T. Takemura, M. Oda, Changes in crack density and wave velocity in association with crack growth in triaxial tests of Inad granite, Journal of Geophysical Research: Solid Earth, 110(B5), 2005.
21
[21] H. TADA, Prediction of deformation behavior of jointed rock mass around cavern considering stress dependency of joint stiffness, International Journal of the JCRM, 8(1), pp. 1-10, 2012.
22
ORIGINAL_ARTICLE
بررسی مکانیزم خرابی رطوبتی در مخلوط های آسفالتی با استفاده از پارامترهای ترمودینامیک و طرح اختلاط
خرابی رطوبتی در مخلوطهای آسفالتی از دست دادن مقاومت و دوام ناشی از حضور آب تعریف می شود. عدم ارتباط مکانیزم خرابی در آزمایشگاه و شرایط میدانی، عدم اندازه گیری خصوصیات موثر مواد و نقش آنها، عدم ارائه راهکار اصلاحی و سایر کمبودهای روش های آزمایشگاهی موجود برای تعیین حساسیت رطوبتی باعث شده است که محققین در سال های اخیر به فکر ارائه روش هایی بر پایه پارامترهای موثر در رخداد خرابی باشند. بر این اساس، این پژوهش تالشی برای ارائه مدل پیش بینی حساسیت رطوبتی با استفاده از پارامترهای ترمودینامیک و طرح اختلاط است که بتواند عملکرد مخلوط آسفالتی در برابر رطوبت را پیشبینی و تحلیل کند. 24 ترکیب مختلف مخلوط آسفالتی با استفاده از سه نوع سنگدانه با عملکرد مختلف در برابر رطوبت، دو نوع قیر و سه نوع افزودنی در پژوهش حاضر مورد بررسی قرار گرفتهاند. مولفه های انرژی آزاد سطحی قیر و سنگدانه به ترتیب با استفاده از روش قطره چسبان و دستگاه جذب همگانی اندازهگیری شدهاند. برای ارائه مدل پیشبینی عملکرد حساسیت رطوبتی مخلوط آسفالتی از شبیه سازی شرایط طبق استاندارد T283 AASHTO استفاده و آزمایش مدول برجهندگی به صورت کشش غیرمستقیم در شرایط خشک و مرطوب انجام شده است. نتایج این پژوهش نشان می دهد که استفاده از افزودنی های ضدعریان شدگی به طور کلی می تواند عملکرد مخلوط آسفالتی در برابر رطوبت را بهبود دهد اما نوع و درصد این افزودنی ها باید با توجه به نوع سنگدانه، نوع قیر و ویژگیهای طرح اختالط مخلوط آسفالتی تعیین شوند. بر اساس مدل ارائه شده می توان گفت پارامترهای انرژی آزاد پیوستگی، انرژی آزاد چسبندگی قیر-سنگدانه در شرایط خشک، قابلیت پوشش دهی سنگدانه توسط قیر، مساحت سطح ویژه سنگدانه ها و ضخامت ظاهری غشای قیر روی سطح سنگدانه به صورت مستقیم و انرژی آزادشده سیستم در هنگام رخداد عریانشدگی، درصد اشباع و نفوذپذیری مخلوط آسفالتی به صورت معکوس بر مقاومت مخلوط آسفالتی در برابر خرابی رطوبتی تاثیر قابل توجه دارند.
https://ceej.aut.ac.ir/article_2832_7ed85f94f2d41dbccdae063aa1e759b6.pdf
2019-08-23
425
436
10.22060/ceej.2018.13580.5440
مخلوط آسفالتی
خرابی رطوبتی
آزمایش لاتمن اصلاحشده
مدول برجهندگی
انرژی آزاد سطحی
فریدون
مقدس نژاد
moghadas@aut.ac.ir
1
دانشگاه صنعتی امیر کبیر
LEAD_AUTHOR
اسعدی
محی الدین
mo.asadi@yahoo.com
2
عمران،فنی مهندسی،دانشگاه آزاد واحد علوم تحقیقات تهران،تهران،ایران
AUTHOR
[1] P. Naidoo, S. Logaraj, A.D. James, Adhesion and cohesion
1
modifiers for asphalt, in, Google Patents, 2013.
2
[2] B.D. Shah, Evaluation of moisture damage within asphalt concrete mixes, Texas A&M University, 2003.
3
[3] D.N. Little, D. Jones, Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements, in: Nation- al seminar on moisture sensitivity of asphalt pavements, 2003, pp. 37-70.
4
[4] D.N. Little, D. Jones, Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements, in: Trans- portation Research Board National Seminar, San Diego, CA, USA, 2003, pp. 37-70.
5
[5] J.-S. Chen, K.-Y. Lin, S.-Y. Young, Effects of crack width and permeability on moisture-induced damage of pavements, Journal of Materials in Civil Engineering, 16(3) (2004) 276- 282.
6
[6] R.G. Hicks, Moisture damage in asphalt concrete, Trans- portation Research Board, 1991.
7
[7] J. Epps, E. Berger, J. Anagnos, Treatments, in: Moisture Sensitivity of Asphalt Pavements-A National Seminar, 2003.
8
[8] M. Solaimanian, J. Harvey, M. Tahmoressi, V. Tandon, Test methods to predict moisture sensitivity of hot-mix asphalt pavements, in: Transportation Research Board National Semi- nar. San Diego, California, 2003, pp. 77-110.
9
[9] A. Standard, D7369,“, Standard Test Method for Determin- ing the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test”, ASTM International, West Conshohocken, PA, (2003).
10
[10] P.E. Sebaaly, Comparison of lime and liquid additives on the moisture damage of hot mix asphalt mixtures, Arlington (Virginia, USA): National Lime Association, (2007).
11
[11] D.W. Christensen, R.F. Bonaquist, Volumetric require- ments for Superpave mix design, Transportation Research Board, 2006.
12
[12] B. Choubane, G.C. Page, J.A. Musselman, Investigation of water permeability of coarse graded superpave pavements, Journal of the Association of Asphalt Paving Technologists, 67 (1998).
13
[13] L.A. Cooley, E.R. Brown, Selection and evaluation of field permeability device for asphalt pavements, Transporta- tion Research Record: Journal of the Transportation Research Board, 1723(1) (2000) 73-82.
14
[14] G. Maupin, Asphalt permeability testing in Virginia, Transportation Research Record: Journal of the Transportation Research Board, 1723(1) (2000) 83-91.
15
[15] J.R. Westerman, AHTD’s experience with superpave pavement permeability, in: Arkansas Superpave Symposium, 1998, pp. 82-99.
16
[16] B. Huang, L.N. Mohammad, P. Chris Abadie, Fundamen- tals of Penneability in Aspbalt Mixtures, in: The Annual Meet- ing of the Association of Asphalt Paving Technologist, 1999.
17
[17] E. Masad, B. Birgisson, A. Al-Omari, A. Cooley, Analysis of permeability and fluid flow in asphalt mixes, in: Proceed- ings of the 82nd Transportation Research Board Annual Meet- ing, CD-ROM Washington, DC, 2003.
18
[18] G.H. Hamedi, F. Moghadas Nejad, Evaluating the Effect of Mix Design and Thermodynamic Parameters on Moisture Sensitivity of Hot Mix Asphalt, Journal of Materials in Civil Engineering, 29(2) (2016) 04016207.
19
ORIGINAL_ARTICLE
مقایسه عملکرد سیستمهای مختلف جداساز لرزهای در پلهای بزرگراهی شهری تحت زلزلههای حوزه نزدیک گسل با در نظر گرفتن مشخصههای اصلی رفتاری جداسازها
پل ها جزء شریان های حیاتی شبکه حملونقل هر کشور محسوب می شوند که تخریب یا آسیب آنها در اثر زمین لرزه سبب توقف عملکرد و به دلیل اختلال در خدمت رسانی موجب افزایش تلفات انسانی و اقتصادی می شود. استفاده از نشیمن های جداساز لرزهای یکی از روش های مؤثر جهت به سازی و بهبود عملکرد لرزهای پل ها است. در این مقاله عملکرد لرزهای پلی با استفاده از سیستم های مختلف جداساز بدون ساده سازی در مدل های رفتاری جداسازها مطالعه شده است. به این منظور عملکرد یک نمونه پل بزرگراهی به صورت مدل پل جداشده لرزهای با 4 نو ع سیستم نشمین جداساز لرزه ای: تک پاندول اصطکا کی، سه پاندول اصطکاکی، الاستومری با هسته سربی،الاستومری با میرایی باال و مدل پل جدا نشده لرزهای مورد مقایسه و ارزیابی قرار می گیرد. در این مقایسه تأ کید بر در نظر گرفتن جنبه های اصلی مدل سازی و پیچیدگی های رفتار غیرخطی جداسازی لرزهای است. مدل سازی و تحلیل دینامیکی غیرخطی با داده های شتابنگاری 6 زمین لرزه حوزه نزدیک توسط نرمافزار OpenSees انجام و ضمن بررسی رفتار جداسازها با ساده سازی در مدل های رفتاری و بدون آن عملکرد پایه ها به عنوان معیار مطالعه شده است. نتایج نشان میدهد. نشیمن های جداساز لرزهای اصطکا کی در مقایسه با نشیمن های الاستومری عملکردی بسیار بهتری در کاهش تنش های اعمال شده به پایه پل دارد و عملکرد لرزهای پل را به طور عمدهای ارتقاء می دهند. این درصد کاهش برای جداساز لرزه ای سه پاندول اصطکا کی تا 89 %می رسد.
https://ceej.aut.ac.ir/article_2833_d008eebd2132b0e31ddb47ac6b905a01.pdf
2019-08-23
437
451
10.22060/ceej.2018.13537.5432
نشیمن جداساز اصطکاکی
نشمین جداساز الاستومری
پل
زلزلهی حوزه نزدیک گسل
زلزله ی حوزه نزدیک گسل
عباس
کرامتی
abbas_keramati65@yahoo.com
1
دانشجوی کارشناسی ارشد، دانشگاه خورازمی
AUTHOR
غلامرضا
نوری
r.nouri@khu.ac.ir
2
گروه عمران، دانشکده فنی و مهندسی دانشگاه خوارزمی تهران ایران
LEAD_AUTHOR
[1] M. Kumar, A.S. Whittaker, M.C. Constantinou, An ad- vanced numerical model of elastomeric seismic isolation bear- ings, Earthquake Engineering & Structural Dynamics, 43(13) (2014) 1955-1974.
1
[2] M. Eröz, R. DesRoches, Bridge seismic response as a func- tion of the Friction Pendulum System (FPS) modeling assump- tions, Engineering Structures, 30(11) (2008) 3204-3212.
2
[3] I. Buckle, S. Nagarajaiah, K. Ferrell, Stability of elastomer- ic isolation bearings: Experimental study, Journal of Structural Engineering, 128(1) (2002) 3-11.
3
[4] I.G. Buckle, J.M. Kelly, Properties of slender elastomeric isolation bearings during shake table studies of a large-scale model bridge deck, Special Publication, 94 (1986) 247-270.
4
[5] I. Buckle, H. Liu, Experimental determination of critical loads of elastomeric isolators at high shear strain, NCEER Bull, 8(3) (1994) 1-5.
5
[6] C.G. Koh, J.M. Kelly, Effects of axial load on elastomeric isolation bearings, Earthquake Engineering Research Center, University of California: Berkeley, United States, 1987.
6
[7] A. Elgamal, L. He, Vertical earthquake ground motion re- cords: an overview, Journal of Earthquake Engineering, 8(05) (2004) 663-697.
7
[8] W. Silva, Characteristics of vertical strong ground motions for applications to engineering design, 1088-3800, 1997.
8
[9] M. Eröz, R. DesRoches, A comparative assessment of slid- ing and elastomeric seismic isolation in a typical multi-span bridge, Journal of Earthquake Engineering, 17(5) (2013) 637- 657.
9
[10] G.P. Warn, A.S. Whittaker, Vertical earthquake loads on seismic isolation systems in bridges, Journal of structural engi- neering, 134(11) (2008) 1696-1704.
10
[11] A. Aviram, K.R. Mackie, B. Stojadinović, Guidelines for nonlinear analysis of bridge structures in California, Pacific Earthquake Engineering Research Center, 2008.
11
[12] AASHTO, Guide specifications for seismic isolation de- sign, American Association of State Highway and Transporta- tion Officials, 2010.
12
[13] I. Buckle, M. Al-Ani, E. Monzon, Seismic isolation design examples of highway bridges, NCHRP Project, (2011) 20-27.
13
[14] American Society of Mechanical Engineers, Guide for verification and validation in computational solid mechanics, 079183042X, ASME, 2006.
14
[15] S. Mazzoni, F. McKenna, M.H. Scott, G.L. Fenves, The open system for earthquake engineering simulation (Open- SEES) user command-language manual, (2006).
15
[16] G.P. Warn, A.S. Whittaker, A study of the coupled hori- zontal-vertical behavior of elastomeric and lead-rubber seismic isolation bearings, (2006).
16
[17] G.P. Warn, A.S. Whittaker, M.C. Constantinou, Vertical stiffness of elastomeric and lead–rubber seismic isolation bear- ings, Journal of Structural Engineering, 133(9) (2007) 1227- 1236.
17
[18] A. Mokha, M. Constantinou, A. Reinhorn, Teflon bearings in base isolation I: Testing, Journal of Structural Engineering, 116(2) (1990) 438-454.
18
[19] M. Constantinou, A. Mokha, A. Reinhorn, Teflon bearings in base isolation II: Modeling, Journal of Structural Engineer- ing, 116(2) (1990) 455-474.
19
[20] H. Ounis, A. Ounis, Effect Of The Damping Of The LRB System On The Dynamic Response Of A Base Isolated Build- ing, in: Turkish Conference on Earthquake Engineering and Seismology–TDMSK, Antakya, Hatay/Turkey, 2013.
20
[21] T.A. Morgan, The use of innovative base isolation systems to achieve complex seismic performance objectives, Univer- sity of California, Berkeley, 2007.
21
ORIGINAL_ARTICLE
تحلیل ریسک پروژه با استفاده از مدل احتمالاتی یکپارچه بتا-اس و تابع کوپولای چند پارامتری
یکی از ویژگیهای هر پروژهای محدود بودن بودجه و زمان برای تکمیل اهداف آن است. با این حال پروژه ها با عدم قطعیت های زیادی مواجه هستند که نیل به این اهداف را با ریسک مواجه می کنند. روش مرسوم مدیریت ارزش کسب شده یکی از مهمترین روش های ارزیابی با هدف ارائه شاخص های عملکردی یکپارچه پروژه است که مبتنی بر استفاده از متغیرهایی با مقادیر تعینی بوده و دارای این محدودیت است که عدم قطعیت هزینه و زمان فعالیت های پروژه را نمی توان به طور صریح مدل سازی نمود. در این تحقیق به کمک شبیه سازی مونت کارلو، منحنی S پروژه در هر تکرار شبیه سازی ایجاد شده و سپس با برازش داده ها، مدل احتمالاتی بتا-اس توابع حاشیهای آن استخراج گردیده است. همچنین در یک رویکرد بدیع، کاربرد توابع کوپوال در استخراج بهترین تابع توزیع مشترک توابع حاشیهای این مدل احتمالاتی نشان داده شده است که می تواند در تحلیل های دقیق ریسک پروژه نظیر به روز رسانی بیزی به کار رود. ً محاسباتی که تمامی پارامترهای همبسته زمان، هزینه نهایی و حتی رفتار نتایج این روش به دلیل ارائه مدلی کامال احتمالاتی این توابع را چه در پایان پروژه و چه قبل از آن توضیح می دهد، نتایجی قابل اعتماد هستند. ماحصل این مدل چندمتغیره، تابعی است که قابلیت توضیح توام رفتار احتمالاتی کمیت های تصادفی و همبسته زمان و هزینه پروژه به همراه عدم قطعیت تجمیع شده آنها را در بر دارد. این مدل در به روزرسانی نیز کاربرد دارد.
https://ceej.aut.ac.ir/article_2864_0737e4ebf2ebaa9716bcd19440da0000.pdf
2019-08-23
453
464
10.22060/ceej.2018.13596.5443
تحلیل ریسک پروژه
ارزش کسب شده احتمالاتی
شبیه سازی مونت کارلو
مدل بتا-اس
تابع کوپولا
مهدی
خیاطی
m.khayyati@srbiau.ac.ir
1
گروه مهندسی عمران، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
AUTHOR
افشین
فیروزی
firouzi@srbiau.ac.ir
2
گروه مهندسی عمران، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
LEAD_AUTHOR
[1] Project Management Body of Knowledge, Project Manage-
1
ment Institute,PMI, 2013.
2
[2]IPMA Competence Baseline Version 3.0, IPMA – Internation- al Project Management Association, 2006.
3
[3] C. Chapman, W. Ward, Project Risk Management Processes
4
Techniques and Insight, 2 ed., Wiley, NY USA, 2003.
5
[4] M. Bagherpour, T. Motarji, Project Cost Management, 1 ed.,
6
Idehnegar, Tehran, Iran, 2013 (In Persian).
7
[5] G.A. Barraza, E.W. Back, F. Mata, Probabilistic Forecasting of Project Performance Using Stochastic S Curves, Journal of Con- struction Engineering and Management, 130(1) (2004) 25-32.
8
[6] S. Vandevoorde, M. Vanhoucke, A Comparison of Differ- ent Project Duration Forecasting Methods Using Earned Value Metrics, International Journal of Project Management, 24 (2006) 289-302.
9
[7] Engineering
10
[8] R.D.H. Warburton, D.F. Cioffi, Estimating a project's earned and final duration, International Journal of Project Management, 34(8) (2016) 1493-1504.
11
[9] H.L. Chen, W.T. Chen, Y.L. Lin, Earned value project man- agement: Improving the predictive power of planned value, In- ternational Journal of Project Management, 34(1) (2016) 22-29.
12
[10] T. Narbaev, A. DeMarco, An Earned Schedule-based regres- sion model to improve cost estimate at completion, International Journal of Project Management, 32(6) (2014) 1007-1018.
13
[11] F. Caron, F. Ruggeri, A. Merli, A Bayesian Approach to Improve Estimate at Completion in Earned Value Management, Project Management Journal, 44(1) (2013) 3-16.
14
[12] A. Alshibani, O. Moselhi, Stochastic Method for Forecast- ing Project Time and Cost, in: Construction Research Congress 2012, ASCE, West Lafayette USA, 2012, pp. 545-555.
15
[13] B.C. Kim, Forecasting Project Progress and Early Warning of Project Overruns With Probabilistic Methods, Texas A&M University, TX,USA, 2007.
16
[14] S.M. AbouRizk, D.W. Halpin, J.R. Wilson, Visual Interac- tive Fitting of Beta Distributions, Journal of Construction Engi- neering and Management, 117(4) (1991) 589-605.
17
[15] O. Zwikael, S. Globerson, T. Raz, Evaluation of Models for Forecasting the Final Cost of a Project, Project Management Journal, 31(1) (2000) 53-57.
18
[16] P. Brandimarte, Handbook in Monte Carlo Simulation Ap- plications in Financial Engineering Risk Management, WILEY, NY, USA, 2014.
19
[17] Cost Risk and Uncertainty Analysis Handbook 1ed., US Air Force, MA USA, 2007.
20
[18] Group of Authors, Risk Management in Projects (Code 659), Presidential Office-The deputy of Planning and Strategic Supervision Press, Tehran, Iran, 2008 (In Persian).
21
[19] M. Zahraei, S. Khazaei, Statistics and Probability in Civil Engineering 1ed., University of Tehran Press, Tehran, Iran, 2008 Group of Authors, Risk Management in Projects (Code 659), Presidential Office-The deputy of Planning and Strategic Super- vision Press, Tehran, Iran, 2008 (In Persian).
22
[20] A. Meucci, A Short Comprehensive Practical Guide to Cop- ulas, Risk Professional Journal, (2011) 22-27.
23
[21] J. Gatz, Properties and Applications of the Student T Copula,
24
University of Delft, Delft, Netherlands, 2007.
25
[22] PMI, Practice Standard for Earned Value Management in, Project Management Institute, Inc., Pennsylvania, USA, 2011, pp. 7-27.
26
[23] R. Elshaer, Impact of sensitivity information on the predic- tion of project's duration using earned schedule method, Inter- national Journal of Project Management, 31(4) (2013) 579-588.
27
[24] J. Brynjarsdóttir, Y. Li, Introduction to Bayesian Statistics, in: U.o.N.C. SAMSI Statistical and Applied Mathematical Scence Institute (Ed.), SAMSI & NCSU, USA, 2012.
28
ORIGINAL_ARTICLE
تاثیر آرایش نوارهایFRP، ابعاد تیر و مقدار آرماتور کششی در ظرفیت برشی تیر بتن مسلح
در ایـن مقالـه، بـه بررسـی اثـر فواصـل قـرار گیـری نوارهـای FRP ،تعداد الیه و سـطح مقطـع آن، میزان آرماتـور طولی، ابعـاد تیـر و مقاومـت فشـاری بتـن در ظرفیـت برشـی تیرهـای بتنـی بـا مقطـع مسـتطیلی شـکل تحـت بـار متمرکـز متقـارن، مقـاوم شـده بـا نوارهـای FRP بـه روش اجـزاء محـدود پرداختـه شـده اسـت. بدیـن منظـور تحلیـل غیـر خطـی 101 نمونـه، جهـت ارزیابـی تاثیـر متغیرهـای فـوق بـر ظرفیـت باربـری و تغییرمـکان وسـط دهانـه تیرهـای مختلـف بـا و بـدون نـوار تقویـت انجـام شـده اسـت. نتایـج حا کـی از آن اسـت کـه بـه ازای مقاومـت فشـاری ثابـت بـرای بتـن، افزایـش عـرض نـوار تقویتـی و افزایـش تعـداد الیـه هـای آن افزایـش ظرفیـت باربـری نسـبت بـه نمونـه هـای کنتـرل دسـته خـود را بـه همـراه دارد،. بـا تغییـر در چیدمـان نوارهـای تقویتـی بـا فواصـل نامنظـم در طـول تیـر، افزایـش ظرفیـت باربـری در حـدود 6 %الـی 35 %حاصـل مـی شـود. همچنیـن افزایـش در میـزان آرماتـور طولـی از مقـدار 10ϕ بـه 14ϕ ،افزایـش مقاومـت فشـاری بتـن از مقـدار 30MPa بـه 50MPa ،و افزایـش سـطح مقطـع تیـر از مقـدار 300mm×150 بـه 400mm×150 در نمونـه هـای تقویـت نشـده سـبب افزایـش ظرفیـت باربـری بـه ترتیـب در حـدود 31 ،%23 ،%55 %و کاهـش تغییرمـکان وسـط دهانـه مـی گـردد.
https://ceej.aut.ac.ir/article_2874_47e03423a3ea5b6a2480fdfd528eeacd.pdf
2019-08-23
465
478
10.22060/ceej.2018.13619.5455
تیر بتن مسلح
نوارهای FRP
آرماتور کششی
ظرفیت برشی
شکل پذیری
مهرداد
حجازی
m.hejazi@eng.ui.ac.ir
1
گروه مهندسی عمران، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد، ایران
LEAD_AUTHOR
میترا
محمدی
examresults@yahoo.com
2
گروه مهندسی عمران، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد
AUTHOR
[1] H.A. Raghu, J.J. Myers, A. Nanni, Shear performance of RC beams strengthened in situ with composites, Report, University of Missouri, Rolla, (2001).
1
A. Khalifa, G. Tumialan, A. Nanni, A. Belarbi, Shear strength- ening of continuous RC beams using externally bonded CFRP sheets, in: American Concrete Institute, Proc., 4th International Symposium on FRP for Reinforcement of Concrete Structures (FRPRCS4), Baltimore, MD, 1999, pp. 995-1008.
2
[3] J.A. Barros, S.J. Dias, Near surface mounted CFRP laminates for shear strengthening of concrete beams, Cement and Concrete Composites, 28(3) (2006) 276-292.
3
[4] M. Chajes, T. Thomson, B. Tarantino, Reinforcement of con- crete structures using externally bonded composite materials, in: RILEM PROCEEDINGS, CHAPMAN & HALL, 1995, pp. 501-501.
4
[5] A.S. Mosallam, S. Banerjee, Shear enhancement of reinforced concrete beams strengthened with FRP composite laminates, Composites Part B: Engineering, 38(5-6) (2007) 781-793.
5
[6] H.-T. Hu, F.-M. Lin, Y.-Y. Jan, Nonlinear finite element analy- sis of reinforced concrete beams strengthened by fiber-reinforced plastics, Composite Structures, 63(3-4) (2004) 271-281.
6
[7] Y.-S. Shin, C. Lee, Flexural behavior of reinforced concrete beams strengthened with carbon fiber-reinforced polymer lami- nates at different levels of sustaining load, Structural Journal, 100(2) (2003) 231-239.
7
[8] O. Buyukozturk, O. Gunes, E. Karaca, Characterization and modeling of debonding in RC beams strengthened with FRP composites, in: 15th ASCE Engineering Mechanics Conference, Columbia University, New York, 2002, pp. 1-8.
8
[9] R.S. Wong, F.J. Vecchio, Towards modeling of reinforced concrete members with externally bonded fiber-reinforced poly- mer composites, ACI Structural Journal, 100(1) (2003) 47-55.
9
[10] N.F. Grace, G. Sayed, A. Soliman, K. Saleh, Strengthening reinforced concrete beams using fiber reinforced polymer (FRP) laminates, ACI Structural Journal-American Concrete Institute, 96(5) (1999) 865-874.
10
[11] A. Sharif, G. Al-Sulaimani, I. Basunbul, M. Baluch, B. Gha- leb, Strengthening of initially loaded reinforced concrete beams using FRP plates, Structural Journal, 91(2) (1994) 160-168.
11
[12] J. Dong, Q. Wang, Z. Guan, Structural behaviour of RC beams with external flexural and flexural–shear strengthening by FRP sheets, Composites Part B: Engineering, 44(1) (2013) 604-612.
12
[13] A.K. El-Sayed, Effect of longitudinal CFRP strengthening on the shear resistance of reinforced concrete beams, Composites Part B: Engineering, 58 (2014) 422-429.
13
[14] D. Baggio, K. Soudki, M. Noel, Strengthening of shear critical RC beams with various FRP systems, Construction and Building Materials, 66 (2014) 634-644.
14
[15] W. Li, C.K. Leung, Shear span–depth ratio effect on behav- ior of RC beam shear strengthened with full-wrapping FRP strip, Journal of Composites for Construction, 20(3) (2015) 04015067.
15
[16] R.Z. Al-Rousan, M.A. Issa, The effect of beam depth on the shear behavior of reinforced concrete beams externally strength- ened with carbon fiber–reinforced polymer composites, Advanc- es in Structural Engineering, 19(11) (2016) 1769-1779.
16
[17] K. ŞENGÜN, G. ARSLAN, INFLUENCE OF CFRP ON THE STRENGTH OF RETROFITTED RC BEAMS WITH- OUT STIRRUPS, Sigma, 35(1) (2017) 77-85.
17
[18] H. Naderpour, S. Alavi, A proposed model to estimate shear contribution of FRP in strengthened RC beams in terms of Adap- tive Neuro-Fuzzy Inference System, Composite Structures, 170 (2017) 215-227.
18
[19] W.-F. Chen, D.-J. Han, Plasticity for structural engineers, J. Ross Publishing, 2007.
19
[20] E.A. Sumner, Unified design of extended end-plate moment connections subject to cyclic loading, Virginia Tech, 2003.
20
[21] T. Jankowiak, T. Lodygowski, Identification of parameters of concrete damage plasticity constitutive model, Foundations of civil and environmental engineering, 6(1) (2005) 53-69.
21
[22] W. Van Paepegem, J. Degrieck, Calculation of damage-de- pendent directional failure indices from the Tsai–Wu static failure criterion, Composites science and technology, 63(2) (2003) 305- 310.
22
ORIGINAL_ARTICLE
شناسایی خرابی سکوی دولفین اسکله پهلوگیری کشتی از طریق بهنگام سازی مدل اجزا محدود
سازه های مستقر در تاسسیسات ساحلی نظیر اسکله های پهلوگیری کشتی در طول عمر خود شرایط کارکرد سختی را تحمل می نمایند و بنابراین در معرض خرابی و افت سختی در اجزا قرار دارند. در این مقاله، کارکرد روش شناسایی خرابی مبتنی بر طیف چگالی توان پاسخ ، در مورد سکوی دولفین اسکله تامین خوراک نفت خام پاالیشگاه مورد بررسی قرار گرفته است. این بررسی با استفاده از مدل سازی عددی صورت گرفته و خرابی به صورت افت درصدی از سختی اجزا لحاظ شده است. مدل اجزا محدود دولفین توسط نرم افزار متلب ایجاد شده و اثر آب مجاور به صورت جرم افزوده بر المانها افزوده شده است. چند سناریوی خرابی فرضی برای بررسی کارکرد روش در مورد خرابی های کم و زیاد در مناطق مختلف سازه در نظر گرفته شده است. بعلاوه، راهکاری برای محاسبه طیف چگالی توان نیروی تحریک با استفاده از تابع پاسخ فرکانسی تقریبی معرفی شده است. نتایج به دست آمده نشان دهنده آن است که روش در شناسایی پارامترهای این مدل علیرغم صلبیت زیاد آن، موفق است. همچنین، بررسی ها نشان می دهد که جرم افزوده آب تاثیر زیادی بر شناسایی پارامترها دارد. کیفیت نتایج به دست آمده در مطالعه عددی، الهام بخش برای توسعه روش در فاز عملیاتی با داده برداری از سازه سکوی دولفین می باشد.
https://ceej.aut.ac.ir/article_3005_f7611b91e304233f4af81e4450933786.pdf
2019-08-23
479
490
10.22060/ceej.2018.13674.5458
شناسایی خرابی
بهنگامسازی مدل اجزا محدود
سکوی دولفین
اسکله پهلوگیری کشتی
طیف چگالی توان پاسخ
مسعود
پدرام
masoudpedram@aut.ac.ir
1
دانشکده مهندسی دریا، دانشگاه صنعتی امیرکبیر
AUTHOR
محمدرضا
خدمتی
khedmati@aut.ac.ir
2
دانشگاه صنعتی امیرکبیر، دانشکده دریا
LEAD_AUTHOR
اکبر
اسفندیاری
a_esfandiari@aut.ac.ir
3
دانشکده مهندسی دریا-دانشگاه صنعتی امیرکبیر
AUTHOR
حسین
کاظم
kazem_hossein@hotmail.com
4
شرکت ملی و مهندسی ساختمان نفت ایران دانشگاه آزاد اسلامی واحد تهران-جنوب
AUTHOR
[1] J.K. Vandiver, Detection of structural failure on fixed plat- forms by measurement of dynamic response, in: Offshore Tech- nology Conference, Offshore Technology Conference, 1975.
1
[2] O. Salawu, Detection of structural damage through changes in frequency: a review, Engineering structures, 19(9) (1997) 718- 723.
2
[3] H. Li, J. Wang, S.-L.J. Hu, Using incomplete modal data for damage detection in offshore jacket structures, Ocean Engineer- ing, 35(17) (2008) 1793-1799.
3
[4] B. Asgarian, M. Amiri, A. Ghafooripour, Damage detection in jacket type offshore platforms using modal strain energy, Struc- tural Engineering and Mechanics, 33(3) (2009) 325-337.
4
[5] F. Liu, H. Li, W. Li, B. Wang, Experimental study of im- proved modal strain energy method for damage localisation in jacket-type offshore wind turbines, Renewable Energy, 72 (2014) 174-181.72 (2014) 174-181.
5
[6] G. Liu, Y. Zhai, D. Leng, X. Tian, W. Mu, Research on struc- tural damage detection of offshore platforms based on grouping modal strain energy, Ocean Engineering, 140 (2017) 43-49.
6
[7] A.A. Elshafey, M.R. Haddara, H. Marzouk, Damage detec- tion in offshore structures using neural networks, Marine Struc- tures, 23(1) (2010) 131-145.
7
[8] B. Asgarian, V. Aghaeidoost, H.R. Shokrgozar, Damage de- tection of jacket type offshore platforms using rate of signal ener- gy using wavelet packet transform, Marine Structures, 45 (2016) 1-21.
8
[9] M. Pedram, A. Esfandiari, M.R. Khedmati, Finite element model updating using strain‐based power spectral density for damage detection, Structural Control and Health Monitoring, (2016).
9
[10] M. Pedram, A. Esfandiari, M.R. Khedmati, Damage detec- tion by a FE model updating method using power spectral den- sity: Numerical and experimental investigation, Journal of Sound and Vibration, 397 (2017) 51-76.
10
[11] H. Malekzehtab, A. Golafshani, Damage detection in an offshore jacket platform using genetic algorithm based finite ele- ment model updating with noisy modal data, Procedia Engineer- ing, 54 (2013) 480-490.
11
[12] J.F. Wilson, Dynamics of offshore structures, John Wiley & Sons, 2003.
12
[13] Regulation, Management and planning organization of Iran, Port and Offshore structures design regualtion (structure and berthing facility), (In persian), (1385).
13
[14] D. Adams, Health monitoring of structural materials and components: methods with applications, John Wiley & Sons, 2007.
14
[15] A. Esfandiari, F. Bakhtiari-Nejad, A. Rahai, M. Sanayei, Structural model updating using frequency response function and quasi-linear sensitivity equation, Journal of sound and vibration, 326(3) (2009) 557-573.
15
ORIGINAL_ARTICLE
بررسی عملکرد زهکشهای افقی در افزایش پایداری شیبهای خاکی در بارندگی های شدید با شبیه سازی عددی
هر ساله وقو ع باران های شدید باعث ایجاد شکست در تعداد زیادی از شیب های خا کی می شود .در طول این بارانها، سطح آب زیرزمینی باال آمده و باعث افزایش فشار آب منفذی و کاهش پایداری شیب میگردد. استفاده از زهکش های افقی روشی مؤثر و کم هزینه جهت کنترل پایداری شیب در این حالت می باشد. هدف از این تحقیق، بررسی عددی عملکرد زهکش های افقی در افزایش پایداری شیب های خا کی در شرایط بارندگی شدید می باشد. برای نیل به این هدف از نرم افزارSEEP/W و SLOPE/W که متعلق به بسته نرم افزاری Geo-Studi می باشند، استفاده شده است. نتایج نشان داد که افزایش طول، ضخامت و تعداد زهکشهای افقی موجب افزایش ضریب اطمینان پایداری شیب در زمان وقو ع بارندگی های شدید و حفظ پایداری شیب می گردد. همچنین بکارگیری زهکش های افقی در قسمت پایین شیب تأثیر بیشتری نسبت به بکارگیری زهکش های افقی در قسمت های وسط و بالای شیب در پایدارسازی شیب خا کی دارد. طول نسبی زهکش برابر 0/4 برای افزایش پایداری شیب مناسب تشخیص داده شد. افزایش ضخامت زهکش افقی تأثیر مثبت بیشتری بر پایداری شیب نسبت به افزایش طول زهکش دارد.
https://ceej.aut.ac.ir/article_2814_b8d9b115cb5a6fb2d45b821e148b2514.pdf
2019-08-23
491
502
10.22060/ceej.2018.13739.5468
زهکش افقی
شکست شیب
ضریب اطمینان
slope/w
seep/w
فرزین
سلماسی
ferzin.salmasi@gmail.com
1
دانشکده کشاورزی، دانشگاه تبریز، تبریز، ایران
LEAD_AUTHOR
علی
حسین زاده دلیر
ahdalir@tabrizu.ac.ir
2
دانشکده کشاورزی، دانشگاه تبریز، تبریز، ایران
AUTHOR
رضا
نوروزی
rezanoruzi1992@gmail.com
3
دانشکده کشاورزی، دانشگاه تبریز، تبریز، ایران
AUTHOR
[1] M. Mohapatra, U.C. Mohanty, Some characteristics of very heavy rainfall over Orissa during summer monsoon season, J.Earth Syst, 114(1) (2005) 17-36.
1
[2] M. Doostkamian, S.H. Mirmousavi, The study and analysis the clusters of heavy rainfall threshold in Iarn, Geography and Development Iranian Journal 13(41) (2016) 131-146.
2
[3] M. Avarzamani, Numerical simulation of the performance of horizontal drains in increasing slope stability with Seep/w and Slope/w software, M.Sc. Thesis in hydraulic structures, Univer- sity of Tabriz, Iran, 2015. (In Persian)
3
[4] R.P. Martin, K.L. Siu, J. Premchitt, Performance of hori- zontal drains in Hong Kong, Special Project Report, SPR 11/94, Hong Kong, 1994.
4
[5] K.C. Lau, T.C. Kenney, Horizontal drains to stabilize clay slopes, Canadian Geotechnical 21(2) (1984) 241-249.
5
[6] A. Moharrami, Y. Hassanzadeh, F. Salmasi, G. Moradi, G. Moharrami, Performance of the horizontal drains in upstream shell of earth dams on the upstream slope stability during rap- id drawdown conditions, Arabian Journal of Geosciences, 7(5) (2014) 1957–1964.
6
[7] A. Malekpour, D. Farsadizadeh, A. Hosseinzadeh Dalir, J. Sadrkarimi, Laboratory investigation on the effect of horizontal drain length and thickness on steady seepage flow through homo- geneous earth dam, Water and Soil Science- University of Tabriz, 21(2) (2011) 51-63. (In Persian)
7
[8] A. Mahmoud, M. Badakhshan, A. Seifi, the effect on the leak- age flow along the horizontal drainage, power drifted and hy- draulic gradient in homogeneous earth dam by numerical simula- tion, Journal of Engineering and Construction Management 1(3) (2016) 20-23. (In Persian).
8
[9] H.R. Saba, M. Kamalian, I. Raeisizadeh, Gables slip thresh- old stability and optimal operation volume embankment navi- gation earth dam using combined neural network and genetic algorithms, Amirkabir Journal of Civil Engineering, (DOI): 10.22060/ceej.2017.11051.4965 (2017). (In Persian)
9
[10] S. Behrouzinia, H. Ahmadi, N. Abbasi, Dynamic properties of seepage and stability on upstream slope of an unsaturated ho- mogeneous earth dam subjected to rapid drawdown, Journal of Agricultural Engineering Research, 16(1) (2015) 19-36.
10
[11] Geo-Slope Version 7.1.0 User manual, Geo Slope Interna- tional, Calgary, 2012.
11
[12] H. Ghasemzadeh, Seepage in saturated and unsaturated soils, K.N. Toosi University, Tehran, 2009. (In Persian)
12
[13] F. Cai, K. Ugai, A. Wakai, Q. Li, Effects of horizontal drains on slope stability under rainfall by three-dimensional finite ele- ment analysis, Journal of Computers and Geotechniques, 23 (1998) 255-275.
13
[14] SPSS (Version 20), Statistical package for social science (SPSS) software version 20.
14
ORIGINAL_ARTICLE
کشف آسیبهای صفحات با استفاده از تبدیل موجک گسسته دادههای مودال بازسازیشده
تکینگی های موضعی بر اثر تغییر در سختی یا جرم ناحیه آسیب دیده به راحتی در نتایج آنالیز مودال قابل تشخیص نیستند. تبدیل موجک با تشخیص آنی تغییرات مکانی سیگنال ورودی، محل آسیب های سازه را تشخیص می دهد. هدف این پژوهش ارائه روشی جهت شناسایی آسیب در صفحات می باشد. لذا در یک مطالعه موردی صفحه ای مربعی با شرایط مرزی متقارن و دارای تکیه گاه گیردار مدل سازی می شود. روش ارائه شده در این پژوهش قادر به کشف عیوب موجود در صفحات با نسبت آسیب 3 %می باشد. در این روش حسب متقارن و یا پادمتقارن بودن ماتریس خیز، هر نقطه از نتایج آنالیز مودال صفحه با نقطه متقارن نسبت به مرکز صفحه، جمع )در حالت پادمتقارن( و یا از آن کم می شود )در حالت متقارن(. نتایج نشان می دهد ضرایب موجک آنالیز مودال بازسازی شده در مقایسه با ضرایب موجک آنالیز مودال اصلی، آسیب های ریز را با وضوح باالیی نمایش می دهد. به عالوه نتایج نشان می دهد که به منظور کاهش هزینه های مالی پروژه می توان از تعداد نقاط نمونه برداری کمتری استفاده کرد مشروط بر آن که درونیابی بین نقاط به کار گرفته شود.
https://ceej.aut.ac.ir/article_2879_5ffe8a0c4e592db292959f9bbe156fbf.pdf
2019-08-23
503
522
10.22060/ceej.2018.13723.5465
کشف عیوب
تبدیل موجک گسسته
آنالیز مودال
سازه های صفحه ای
پایش سازه
میلاد
پایسته
m67.payesteh@gmail.com
1
کارشناس ارشد عمران، مهندسی رودخانه، دانشگاه صنعتی جندی شاپور، دزفول، ایران
AUTHOR
مرتضی
آقاجان نشتایی
morteza.a.nashtaee@gmail.com
2
دانشگاه شهید بهشتی
AUTHOR
محمد
طاهری نسب
mtaherinasab@gmail.com
3
هیئت علمی دانشکده عمران، دانشگاه صنعتی جندی شاپور دزفول
LEAD_AUTHOR
سیدبهرام
بهشتی اول
beheshti@kntu.ac.ir
4
عضو هیات علمی رسمی قطعی
AUTHOR
[1] A. Behnia, H. Chai, M. Yorikawa, S. Momoki, M. Terazawa T. Shiotani, Integrated non-destructive assessment of concrete structures under flexure by acoustic emission and travel time to- mography, Construction and Building Materials, 67 (2014) 202- 215.
1
[2] H. Pahlavan, A. Naseri, A. Einollahi, Probabilistic Seismic Vulnerability assessment of RC Frame Structures Retrofitted with Steel Jacketing, Amirkabir Journal of Civil Engineering, (2018). (in Persian)
2
[3] D.J. Joo, Damage detection and system identification using a wavelet energy based approach, Columbia University, 2012.
3
[4] M. Ruzzene, A. Fasana, L. Garibaldi, B. Piombo, Natural fre-quencies and dampings identification using wavelet transform:application to real data, Mechanical systems and signal process ing, 11(2) (1997) 207-218
4
[5] A. Robertson, K. Park, K. Alvin, Identification of structural dynamics models using wavelet-generated impulse response data, Journal of vibration and acoustics, 120(1) (1998) 261-266
5
[6] R. Ghanem, F. Romeo, A wavelet-based approach for the identification of linear time-varying dynamical systems, Journal of sound and vibration, 234(4) (2000) 555-576
6
[7] C. Huang, S. Hung, C. Lin, W. Su, A wavelet‐based approach to identifying structural modal parameters from seismic response and free vibration data, Computer‐Aided Civil and Infrastructure Engineering, 20(6) (2005) 408-423.
7
[8] R.-P. Luk, R.I. Damper, Non-parametric linear time-invariant nal Processing, 16(3) (2006) 303-319.
8
[9] X. Xu, Z. Shi, Q. You, Identification of linear time-varying systems using a wavelet-based state-space method, Mechanical Systems and Signal Processing, 26 (2012) 91-103.
9
[10] Z.S.L. Shen, S. Law, Parameter identification of LTV dy-namical system based on wavelet method, In Proceedings of the Forth International Conference on Earthquake Engineering, Tai pei, Taiwan, October (2006), pp. 202–210.
10
[11] W. Staszewski, Identification of non-linear systems using multi-scale ridges and skeletons of the wavelet transform, Journal of Sound and Vibration, 214(4) (1998) 639-658.
11
[12] J. Lardies, S. Gouttebroze, Identification of modal param eters using the wavelet transform, International Journal of Me- chanical Sciences, 44(11) (2002) 2263-2283.
12
[13] P. Argoul, T.-p. Le, Instantaneous indicators of structural be haviour based on the continuous Cauchy wavelet analysis, Me- chanical Systems and Signal Processing, 17(1) (2003) 243-250.
13
[14] J. Slavič, I. Simonovski, M. Boltežar, Damping identifica- tion using a continuous wavelet transform: application to real data, Journal of Sound and Vibration, 262(2) (2003) 291-307.
14
[15] A. Pandey, M. Biswas, M. Samman, Damage detection from changes in curvature mode shapes, Journal of sound and vibra- tion, 145(2) (1991) 321-332.
15
[16] S. Ravanfar, H. Razak, Z. Ismail, H. Monajemi, An im- proved method of parameter identification and damage detection in beam structures under flexural vibration using wavelet multi- resolution analysis, Sensors, 15(9) (2015) 22750-22775.
16
[17] R. Sampaio, N. Maia, J. Silva, Damage detection using the frequency-response-function curvature method, Journal of sound and vibration, 226(5) (1999) 1029-1042.
17
[18] A. Gentile, A. Messina, On the continuous wavelet trans-forms applied to discrete vibrational data for detecting open cracks in damaged beams, International Journal of Solids and Structures, 40(2) (2003) 295-315.
18
[19] S.-T. Quek, Q. Wang, L. Zhang, K.-K. Ang, Sensitivity anal-ysis of crack detection in beams by wavelet technique, Interna-tional journal of mechanical sciences, 43(12) (2001) 2899-2910.
19
[20] J.-C. Hong, Y. Kim, H. Lee, Y. Lee, Damage detection using the Lipschitz exponent estimated by the wavelet transform: ap-plications to vibration modes of a beam, International journal of solids and structures, 39(7) (2002) 1803-1816.
20
[21] Y. Yan, H. Hao, L. Yam, Vibration-based construction and extraction of structural damage feature index, International jour-nal of solids and structures, 41(24-25) (2004) 6661-6676.
21
[22] J.-G. Han, W.-X. Ren, Z.-S. Sun, Wavelet packet based dam-age identification of beam structures, International Journal of Sol-ids and Structures, 42(26) (2005) 6610-6627.
22
[23] B.H. Kim, T. Park, G.Z. Voyiadjis, Damage estimation on beam-like structures using the multi-resolution analysis, Interna-tional Journal of Solids and Structures, 43(14-15) (2006) 4238-4257.
23
[24] X. Zhu, S. Law, Wavelet-based crack identification of bridge beam from operational deflection time history, International Jour-nal of Solids and Structures, 43(7-8) (2006) 2299-2317.
24
[25] S. Zhong, S.O. Oyadiji, Detection of cracks in simply-sup-ported beams by continuous wavelet transform of reconstructed modal data, Computers & structures, 89(1-2) (2011) 127-148.
25
[26] A. Ovanesova, L.E. Suarez, Applications of wavelet trans-forms to damage detection in frame structures, Engineering struc-tures, 26(1) (2004) 39-49.
26
[27] C.-C. Chang, L.-W. Chen, Detection of the location and size of cracks in the multiple cracked beam by spatial wavelet based approach, Mechanical Systems and Signal Processing, 19(1) (2005) 139-155.
27
[28] E. Douka, S. Loutridis, A. Trochidis, Crack identification in plates using wavelet analysis, Journal of sound and vibration, 270(1-2) (2004) 279-295.
28
[29] W. Xu, M. Radzieński, W. Ostachowicz, M. Cao, Damage detection in plates using two-dimensional directional Gaussian wavelets and laser scanned operating deflection shapes, Struc-tural Health Monitoring, 12(5-6) (2013) 457-468.
29
[30] W. Fan, P. Qiao, A 2-D continuous wavelet transform of mode shape data for damage detection of plate structures, Inter-national Journal of Solids and Structures, 46(25-26) (2009) 4379-4395.
30
[31] A. Bagheri, G. Ghodrati Amiri, M. Khorasani, H. Bakhshi, Structural damage identification of plates based on modal data using 2D discrete wavelet transform, Structural Engineering and Mechanics, 40(1) (2011) 13-28.
31
[32] S. Mallat, A wavelet tour of signal processing, Elsevier, 1999.
32
[33] I. Daubechies, Ten lectures on wavelets, Siam, 1992.
33
[34] C.R. Farrar, S.W. Doebling, An overview of modal-based damage identification methods, Los Alamos National Lab., NM
34
(United States), 1997.
35
[35] J. Vanherzeele, S. Vanlanduit, P. Guillaume, Reducing meas-urement time for a laser Doppler vibrometer using regressive techniques, Optics and lasers in engineering, 45(1) (2007) 49-56.
36
ORIGINAL_ARTICLE
تأثیر شرایط عمل آوری کلرایدی بر خواص مکانیکی و دوام بتن حاوی زئولیت و میکرونانوحباب
یـون کلرایـد بیشـترین سـهم در ترکیبـات شـیمیایی موجـود در آب دریـا را بـه خـود اختصـاص می دهـد. در ایـن تحقیـق بـرای بررسـی تأثیـر ایـن یـون بـر خـواص بتـن از شـرایط عمـلآوری کلرایـدی و جهـت بهبـود خـواص مکانیکـی و دوام بتـن از افزودنی هـای زئولیـت و میکرو-نانوحبـاب اسـتفاده گردیـده اسـت. بـر اسـاس آزمایش هـای انجام شـده شـامل پـراش اشـعه ایکـس، مقاومـت فشـاری، جـذب آب، نفـوذ کلرایـد و مقاومت الکتریکی مشـخص گردیـد که افزودن پـوزوالن زئولیت و میکرو- نانوحبـاب بـه بتـن در شـرایط عمـلآوری کلرایـدی از طریـق ایجـاد نمـک فریـدل، خـواص مکانیکـی و دوام بتـن را در سـن 28 روز بهبـود بخشـیده و پـس از آن بـا افزایـش سـن بتـن و تجزیـه ترکیـب نمـک فریـدل در نمونه هـای بتنـی از رونـد بهبـود کاسـته می شـود. بیشـترین تأثیـر در بهبـود خـواص مکانیکـی و دوام بتـن در سـن 28 روز مربـوط بـه نمونـهی شـامل 15 درصـد زئولیـت و 100 درصـد میکرو-نانوحبـاب در شـرایط عمـلآوری کلرایـدی اسـت کـه بـه ترتیـب مقاومـت فشـاری، کششـی و الکتریکـی را بـه مقـدار 47 ،78 و 254 درصـد افزایـش و نفـوذ کلرایـد و جـذب آب را بـه ترتیـب بـه مقـدار 84 و 49 درصـد نسـبت بـه نمونـه شـاهد در شـرایط عمـلآوری اسـتاندارد کاهـش می دهـد.
https://ceej.aut.ac.ir/article_2718_f3eb6c3a27882b0f8d5bdfb45119080a.pdf
2019-08-23
523
534
10.22060/ceej.2017.13603.5446
خواص مکانیکی
خواص دوام
زئولیت
میکرو-نانوحباب
شرایط عملآوری کلرایدی
معین
خوشرو
moein.khoshroo@yahoo.com
1
گروه عمران، دانشکده فنی و مهندسی، دانشکاه خوارزمی، تهران، ایران
AUTHOR
علی
کاتبی
katebi@khu.ac.ir
2
گروه عمران، دانشکده فنی و مهندسی، دانشگاه خوارزمی، تهران، ایران
LEAD_AUTHOR
علی اکبر
شیرزادی جاوید
shirzad@iust.ac.ir
3
گروه مدیریت ساخت، دانشکده عمران، دانشگاه علم و صنعت، تهران، ایران.
AUTHOR
[1] G. Hoff, DURABILITY OF OFFSHORE AND MARINE CONCRETE STRUCTURES. IN: DURABILITY OF CON- CRETE. SECOND INTERNATIONAL CONFERENCE. AUGUST 4-9, 1991, MONTREAL, CANADA. VOLUME I, in: DURABILITY OF CONCRETE. SECOND INTERNA- TIONAL CONFERENCE., 1991.
1
[2] W. McCoy, Mixing and curing water for concrete, in: Signifi- cance of Tests and Properties of Concrete and Concrete-Making Materials, ASTM International, 1966.
2
[3] R. Dhir, M. Jones, Development of chloride-resisting con- crete using fly ash, fuel, 78(2) (1999) 137 142.
3
[4] P.C. Hewlett, G. Hunter and M. Jones, RBridging the gaps, Chem. Br, 35(1) (1999) 40-43. 1999.
4
5] G. Batis, P. Pantazopoulou, S. Tsivilis, E. Badogiannis, The ef- fect of metakaolin on the corrosion behavior of cement mortars, Cement and Concrete Composites, 27(1) (2005) 125-130.
5
[6] T. Dyer, Concrete durability, Crc Press, 2014.
6
[7] J. Bai, S. Wild, B. Sabir, Sorptivity and strength of air-cured and water-cured PC–PFA–MK concrete and the influence of binder composition on carbonation depth, Cement and Concrete Research, 32(11) (2002) 1813-1821.
7
[8] H. Zibara, Binding of external chlorides by cement pastes, National Library of Canada= Bibliothèque nationale du Canada, 2001.
8
[9] J. Bai, B. Sabir, S. Wild, J. Kinuthia, Strength development in concrete incorporating PFA and metakaolin, Magazine of con- crete research, 52(3) (2000) 153-162.
9
[10] Q. Li, H. Geng, Y. Huang, Z. Shui, Chloride resistance of concrete with metakaolin addition and seawater mixing: a com- parative study, Construction and Building Materials, 101 (2015) 184-192.
10
[11] H. Pradesh, Application Of Nanotechnology InBuilding Ma- terials, International Journal of Engineering Research and Appli- cations (IJERA), 2 (2012) 1077-1082.
11
[12] H. Li, L. Hu, D. Song, A. Al-Tabbaa, Subsurface transport behavior of micro-nano bubbles and potential applications for groundwater remediation, International journal of environmental research and public health, 11(1) (2014) 473-486.
12
[13] F. Maoming, T. Daniel, R. HONAKER, L. Zhenfu, Nano- bubble generation and its application in froth flotation (part I): nanobubble generation and its effects on properties of microbub- ble and millimeter scale bubble solutions, Mining Science and Technology (China), 20(1) (2010) 1-19.
13
[14] A. Arefi, S.F. Saghravani, R. Mozaffari Naeeni, Mechanical Behavior of Concrete, Made with Micro-Nano Air Bubbles, Civil Engineering Infrastructures Journal, 49(1) (2016) 139-147.
14
[15] S. Kwan, Larosa, J. Si and Al MASNMR, Study Of Stratlin- gite, American Ceramic Society, 78 (2005) 1921-1926.
15
[16] N. Saikia, S. Kato, T. Kojima, Thermogravimetric investigation on the chloride binding behaviour of MK–lime paste, Ther- mochimica Acta, 444(1) (2006) 16-25.
16
[17] U. Birnin-Yauri, F. Glasser, Friedel’s salt, Ca2Al (OH) 6 (Cl, OH)· 2H2O: its solid solutions and their role in chloride binding, Cement and Concrete Research, 28(12) (1998) 1713-1723.
17
ORIGINAL_ARTICLE
بررسی تعادلی و سینتیکی جذب رنگزای C.I. Basic red 14 بر روی جاذب ارزان قیمت فلدسپار
دراین تحقیق امکان استفاده از جاذب فلدسپار که یک جاذب معدنی ارزان قیمت بر پایه سیلیکا است، برای حذف رنگزای کاتیونی 14 red Basic. I.C با نام تجاری ( Brilliant red 4G )از محلول آبی بررسی شد. خصوصیات سطحی جاذب با استفاده از میکروسکوپ الکترونی روبشی (SEM) ،پراش فلوئورسنس پرتو ایکس (XRF )و تبدیل فوریه مادون قرمز (FTIR )بررسی شد.تاثیر عوامل مختلف از جمله مقدار ماده جاذب، مدت زمان تماس، غلظت اولیه رنگزا،pH اولیه و حضور الکترولیت بر فرآیند جذب مورد مطالعه قرار گرفت. نتایج نشان دادند که افزایش pH ،زمان تماس و مقدار جاذب بر میزان رنگبری تاثیر مثبت دارد درحالیکه افزایش غلظت محلول رنگزا سبب کاهش مقدار رنگبری می شود. همچنین افزودن الکترولیت میزان رنگبری را به مقدار بسیار کمی کاهش می دهد که چشمگیر نیست. فلدسپار در زمانی حدود یک ساعت با رنگزای C.I Basic red 14 به تعادل می رسد راندمان حذف برابر ۹۶ درصد است. در نتیجه فلدسپار یک جاذب قوی و مناسب برای حذف مواد رنگزای کاتیونی از محلولهای آبی است. ایزوترم حالت تعادل با مدل ایزوترمهای جذب النگمیر، فرندلیش، تمکین، ردلیش پیترسون و دوبینین رادشکویچ مطابقت داده شد و نتایج نشان دادند که رنگبری تطابق خوبی با ایزوترم فرندلیش دارد. سینتیک جذب سطحی با استفاده از مدل های سینتیکی شبه مرتبه اول، شبه مرتبه دوم و نفوذ درون ذره ای بررسی شد و مشاهد گردید که فرآیند جذب بر روی فلدسپار از معادالت سینتیکی شبه مرتبه دوم تبعیت میکند، لذا فرآیند جذب سطحی بیشتر بهصورت جذب شیمیایی است.
https://ceej.aut.ac.ir/article_2875_c1912010f32784d3f7e1ad3472681502.pdf
2019-08-23
535
546
10.22060/ceej.2018.13770.5475
رنگبری
جذب سطحی
رنگزای کاتیونی
فلدسپار
ایزوترم و سینتیک جذب
حسین
کتابی
1
گروه مهندسی نساجی، دانشکده فنی، دانشگاه گیلان، رشت، ایران
AUTHOR
لیلا
میوه ای
leila.mivehi@yahoo.com
2
گروه مهندسی نساجی، دانشکده فنی، دانشگاه گیلان، رشت، ایران
LEAD_AUTHOR
[1] S. Liu, F. Konstantopoulou, P. Gikas, L.G. Papageorgiou, A mixed integer optimisation approach for integrated water re- sources management, Computers & Chemical Engineering, 35)5( )2011( 858-875.
1
[2] C. Li, T. Lou, X. Yan, Y.-z. Long, G. Cui, X. Wang, Fabrica- tion of pure chitosan nanofibrous membranes as effective absor- bent for dye removal, International journal of biological macro- molecules, 106 (2018) 768-774.
2
[3] G. Pearce, UF/MF pre-treatment to RO in seawater and wastewater reuse applications: a comparison of energy costs, De- salination, 222(1-3) (2008) 66-73.
3
[4] A. Maljaei, M. Arami, N.M. Mahmoodi, Decolorization and aromatic ring degradation of colored textile wastewater using indirect electrochemical oxidation method, Desalination, 249(3) (2009) 1074-1078.
4
[5] A. Tehrani-Bagha, N. Mahmoodi, M. Markazi, E. Talaee, Re- moval of a cationic dye from wastewater by low-cost kaolin, J. Color Sci. Tech, 3 (2009) 145-155.
5
[6] A.K. Mishra, T. Arockiadoss, S. Ramaprabhu, Study of re- moval of azo dye by functionalized multi walled carbon nano- tubes, Chemical Engineering Journal, 162(3) (2010) 1026-1034.
6
[7] X. Xiao, F. Zhang, Z. Feng, S. Deng, Y. Wang, Adsorptive removal and kinetics of methylene blue from aqueous solution using NiO/MCM-41 composite, Physica E: Low-dimensional Systems and Nanostructures, 65 (2015) 4-12.
7
[8] X. Li, X. Jin, N. Zhao, I. Angelidaki, Y. Zhang, Novel bio- electro-Fenton technology for azo dye wastewater treatment using microbial reverse-electrodialysis electrolysis cell, Biore- source technology, 228 (2017) 322-329.
8
[9] J.C. Cardoso, G.G. Bessegato, M.V.B. Zanoni, Efficiency comparison of ozonation, photolysis, photocatalysis and photo- electrocatalysis methods in real textile wastewater decoloriza- tion, Water research, 98 (2016) 39-46.
9
[10] H.-Y. Shu, M.-C. Chang, S.-W. Huang, Decolorization and mineralization of azo dye Acid Blue 113 by the UV/Oxone pro- cess and optimization of operating parameters, Desalination and Water Treatment, 57(17) (2016) 7951-7962.
10
[11] Q. Li, Y. Li, X. Ma, Q. Du, K. Sui, D. Wang, C. Wang, H. Li, Y. Xia, Filtration and adsorption properties of porous calcium alginate membrane for methylene blue removal from water, Chemical Engineering Journal, 316 (2017) 623-630.
11
[12] A. Das, S. Mishra, Removal of textile dye reactive green-19 using bacterial consortium: process optimization using response surface methodology and kinetics study, Journal of environmen- tal chemical engineering, 5(1) (2017) 612-627.
12
[13] F. Zhang, X. Chen, F. Wu, Y. Ji, High adsorption capability and selectivity of ZnO nanoparticles for dye removal, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 509 (2016) 474-483.
13
[14] H. Li, S. Liu, J. Zhao, N. Feng, Removal of reactive dyes from wastewater assisted with kaolin clay by magnesium hy- droxide coagulation process, Colloids and Surfaces A: Physico- chemical and Engineering Aspects, 494 (2016) 222-227.
14
[15] M. Constantin, I. Asmarandei, V. Harabagiu, L. Ghimici, P. Ascenzi, G. Fundueanu, Removal of anionic dyes from aqueous solutions by an ion-exchanger based on pullulan microspheres, Carbohydrate polymers, 91(1) (2013) 74-84.
15
[15] J.T. Chacko, K. Subramaniam, Enzymatic degradation of azo dyes-a review, International Journal of Environmental Sci- ences, 1(6) (2011) 1250.
16
[16] I. Cretescu, T. Lupascu, I. Buciscanu, T. Balau-Mindru, G. Soreanu, Low-cost sorbents for the removal of acid dyes from aqueous solutions, Process Safety and Environmental Protection, 108 (2017) 57-66.
17
[17] S. De Gisi, G. Lofrano, M. Grassi, M. Notarnicola, Charac- teristics and adsorption capacities of low-cost sorbents for waste- water treatment: a review, Sustainable Materials and Technolo- gies, 9 (2016) 10-40.
18
[18] G. Crini, P.-M. Badot, Application of chitosan, a natural aminopolysaccharide, for dye removal from aqueous solutions by adsorption processes using batch studies: a review of recent literature, Progress in polymer science, 33(4) (2008) 399-447.
19
[19] M. Rinaudo, Chitin and chitosan: properties and applica- tions, Progress in polymer science, 31(7) (2006) 603-632.
20
[20] M. Yazdani, N. Mohammad Mahmoodi, M. Arami, H. Bah- rami, Isotherm, kinetic, and thermodynamic of cationic dye re- moval from binary system by Feldspar, Separation Science and Technology, 47(11) (2012) 1660-1672.
21
[21] G. Crini, F. Gimbert, C. Robert, B. Martel, O. Adam, N. Morin-Crini, F. De Giorgi, P.-M. Badot, The removal of Basic Blue 3 from aqueous solutions by chitosan-based adsorbent: Batch studies, Journal of Hazardous Materials, 153(1-2) (2008) 96-106.
22
[22] E. Lorenc-Grabowska, G. Gryglewicz, Adsorption charac- teristics of Congo Red on coal-based mesoporous activated carbon, Dyes and pigments, 74(1) (2007) 34-40.
23
[23] Y. El Mouzdahir, A. Elmchaouri, R. Mahboub, A. Gil, S. Ko- rili, Equilibrium modeling for the adsorption of methylene blue from aqueous solutions on activated clay minerals, Desalination, 250)1( )2010( 335-338.
24
[24] I. Langmuir, The adsorption of gases on plane surfaces of glass, mica and platinum, Journal of the American Chemical so- ciety, 40(9) (1918) 1361-1403.
25
[25] H. Freundlich, W. Heller, The adsorption of cis-and trans- azobenzene, Journal of the American Chemical Society, 61(8) (1939) 2228-2230.
26
[26] M. Temkin, V. Pyzhev, Recent modifications to Langmuir isotherms, (1940).
27
[27] O. Redlich, D.L. Peterson, A useful adsorption isotherm, Journal of Physical Chemistry, 63(6) (1959) 1024-1024.
28
ORIGINAL_ARTICLE
نشتیابی و مقایسهی آزمایشگاهی و نظری خصوصیات جریانگذرا در لولههای انتقال پلیاتیلنی
لولههای پلیمری بهطور گستردهای در سامانه های آبی تحتفشار استفاده می شوند. باید در طراحی و همچنین تفسیر سیگنال برداشت شده از ضربه قوچ برای اهداف تشخیصی، رفتار ویسکواالستیک لوله های پلی اتیلنی را در نظر گرفت. هدف از مقاله ی حاضر نشتیابی، مقایسه ی آزمایشگاهی و نظری سرعت موج فشاری و اضافه فشار جریان گذرا در لوله های انتقال پلی اتیلنی در عدد رینولدزهای متفاوت می باشد. برای رسیدن به اهداف این مقاله مدلی در آزمایشگاه هیدرولیک دانشکده ی مهندسی علوم آب دانشگاه شهید چمران اهواز ساخته شد و چندین آزمایش ضربه قوچ در دو حالت مدل بدون نشت و مدل با حضور نشت بر روی آن انجام گرفت. دقت نشتیابی در این مدل با افزایش عدد رینولدز افزایش یافت بهطوری که بیشترین و کمترین درصد خطای نسبی مکان نشت محاسباتی و آزمایشگاهی 48/8 و 2/02 درصد به ترتیب برای آزمایش های با اعداد رینولدز 1283 و 12974 در قطر نشت 5 میلیمتر بدست آمد. همچنین این تحقیق عدم دقت مناسب رابطه های تئوری سرعت موج فشاری و اضافه فشار را در لوله های انتقال پلی اتیلنی نشان می دهد، بطوریکه سرعت موج فشاری بدست آمده از رابطه های تئوری کمتر از مقدار واقعی آن می باشد، همچنین درصد خطای نسبی میزان اضافه فشار در آزمایش های دارای نشت با افزایش عدد رینولدز بین مقدار آزمایشگاهی و تئوری افزایش می یابد.
https://ceej.aut.ac.ir/article_2767_75aca978a8c3eb4a69c65f7fd3579643.pdf
2019-08-23
547
556
10.22060/ceej.2017.13539.5438
جریان گذرا
ویسکوالاستیک
سرعت موج فشاری
عدد رینولدز
اضافه فشار
مصطفی
میرزاییجشنی
mostafamj9094@gmail.com
1
دانش آموخته گروه سازه های آبی، دانشکده مهندسی علوم آب، دانشگاه شهیدچمران اهواز، اهواز
LEAD_AUTHOR
منوچهر
فتحیمقدم
fathi49@gmail.com
2
استاد گروه سازه های آبی، دانشکده مهندسی علوم آب، دانشگاه شهیدچمران اهواز، اهواز
AUTHOR
علیرضا
ثابتایمانی
alireza.sabetimani@yahoo.com
3
دانش آموخته گروه سازه های آبی، دانشکده مهندسی علوم آب، دانشگاه شهیدچمران اهواز، اهواز
AUTHOR
اصغر
اکبری
a.akbari94347@gmail.com
4
دانش آموخته گروه سازه های آبی، دانشکده مهندسی علوم آب، دانشگاه شهیدچمران اهواز، اهواز
AUTHOR
[1] Misiunas, D. Vitkovsky´, J. P. Olsson, G. Simpson, A. R. & Lambert, M. F. (2005). Pipeline break detection using pressure transient monitoring. Journal of Water Resources Planning and Management, 131)4(, 316-325.
1
[2] Haghighi, a. )1388( Development of pipeline leakage and calibration methods based on reverse transient current modeling. Ph.D. Department of Civil Engineering, Khaje Nasir Din Tusi University of Technology. (in Persian)
2
[3] Colombo, A.F. Karney, B.W. 2002. Energy and costs of leaks: toward a comprehensive picture. Journal of Water Resources Planning and Management, ASCE 128 )6(, 441e450.
3
[4] Streeter, V. L., and Wylie, E. B. )1978(. Fluid transients,McGraw–Hill International Books, New York.
4
[5] Brunone, B., and Ferrante, M. (2001). “Detecting leaks in pressurised pipes by means of transients.” J. Hydraul. Res., 39)5(, 539–547.
5
[6] Covas, D. I. C., Stoianov, I., Mano, J., Ramos, H. M., Gra- ham, N., and Maksimovic, C. (2004). “The dynamic effect of pipe-wall viscoelasticity in hydraulic transients. Part I—Experi- mental analysis and creep characterization.” J. Hydraul. Res., 42(5), 517–531.
6
[7] Covas, D. I. C., Stoianov, I., Mano, J., Ramos, H. M., Gra- ham, N., and Maksimovic, C. (2005). “The dynamic effect of pipe-wall viscoelasticity in hydraulic transients. Part II—Mod- el development, calibration and verification.” J. Hydraul. Res., 43(1), 56–70.
7
[8] Soares, A. K., Covas, D. I. C., and Reis, R. L. F. (2008). “Analysis of PVC pipe-wall viscoelasticity during water ham- mer.” J. Hydraul. Eng.,
8
10.1061/(ASCE)0733-9429(2008)134:9(1389), 1389–1394.
9
[9] Vítkovský, J. P., Lambert, M. F., Simpson, A. R., & Liggett,
10
J. A. (2007). Experimental observation and analysis of inverse transients for pipeline leak detection. Journal of Water Resources Planning and Management, 133)6(, 519-530.
11
[10] Al-Khomairi A (2008) Leak detection in long pipelines using the least squares method. J Hydraul Res 46(3):392–401.
12
[11] Ferrante, M., Massari, C., Brunone, B., and Meniconi, S. (2011). “Experimental evidence of hysteresis in the head dis-
13
charge relationship for a leak in a polyethylene pipe.” J. Hydraul. Eng., 10.1061/(ASCE)HY .1943-7900.0000360, 775–780.
14
[12] Keramat, A., Tijsseling, A. S., Hou, Q., and Ahmadi, A. (2012). “Fluid-structure interaction with pipe-wall viscoelasticity during water hammer.” J. Fluid. Struct., 28, 434–455.
15
[13] Duan, H., Ghidaoui, M., Lee, P. J., and Tung, Y. (2010). “Unsteady friction and visco-elasticity in pipe fluid transients.” J. Hydraul. Res., 48(3), 354–362.
16
[14] Lee, P. J., Duan, H. F., Ghidaoui, M., and Karney, B. )2014(. “Frequency domain analysis of pipe fluid transient behavior.” J. Hydraul. Res., 51(6), 609–622.
17
[15] Taebei, H., Fathi-Moghadam, M. (1393). Hydrolic Flow Measurement in Split Pipelines. Journal of (in Persian) Science and Engineering. Volume 37, number 4, pp. 55-62. Irrigation
18
[16] Huang, Y. C., Lin, C. C., & Yeh, H. D. (2015). An Opti- mization Approach to Leak Detection in Pipe Networks Using Simulated Annealing. Water Resources Management, 29(11), 4185-4201.
19
[17] Chaudhry M.H (1987) Applied Hydraulic Transients: sec- ond edition Van Nostrand Reinhold Co., New York.
20
[18] Wylie E. Benjamin, Streeter Victor L, Suo Lisheng (1993) Fluid Transients in Systems: Prentice Hall.
21
ORIGINAL_ARTICLE
بررسی عددی-آزمایشگاهی جداساز لرزهای ژئوسنتتیکی در بستر مدفنهای زبالة جامد شهری: مطالعة مدفن کهریزک تهران
بارهای لرزهای ناشی از جابجایی های درون زباله، سیستم لاینر تحتانی، سیستم پوشش، پی و فصول مشترک می توانند باعث آسیب مدفن های زباله شهری شوند. مصالح سنتتیکی صیقلی واقع در زیر سازه ها می توانند با مکانیزم لغزندگی و جذب انرژی وارده از زلزله ها، باعث حفاظت لرزهای شوند. در مطالعه حاضر، بررسی های آزمایشگاهی به منظور ارزیابی نقش جداسازی بستر درون خا کی بر روی پاسخ لرزهای مدفن زباله شهری کهریزک انجام گرفتند. آزمایش های میزلرزه روی خا کریز زباله جامد شهری عایق شده با لاینرهای شبه بیضوی در معرض تحریک های سینوسی هارمونیک در بستر، انجام شدند. همچنین مدل سازی عددی بر روی مدل فیزیکی صورت پذیرفت. نتایج حالت های جدا شده و جدا نشده برحسب جابجایی دائمی و پاسخ لرزهای مورد مقایسه قرار گرفتند. در ادامه، رفتار مدل عددی مدفن تحت تأثیر پارامترهای مختلف مورد ارزیابی قرار گرفت. در این مطالعه همخوانی خوبی بین نتایج مدل فیزیکی و مدل عددی بزرگ مقیاس حاصل شد. مطالعات صورت گرفته ثابت کردند که به کارگیری سیستم الینر کامپوزیتی با کاهش بیشتر ضریب اصطکا ک کاهش قابل ملاحظه ای در مقدار شتاب ها و جابجایی ها حاصل نموده و در شرایط لرزهای از سازه محافظت به عمل می آورد. کارآیی این تکنیک با افزایش تراز شتاب ورودی افزایش می یابد. نتایج نشان دادند که افزایش مدول برشی، مقدار بزرگنمایی طیفی و جابجایی نسبی را کاهش می دهد. همچنین مالحظه شد که با افزایش سن زباله، جداسازی بستر مقدار جابجایی و عرض ترک را افزایش می دهد. عالوه بر این، اجرای لاینر بصورت تخت، حرکت گوه گسیختگی به سمت کناره ها را تسهیل نموده و اجرای لاینر مقعر مانع از حرکت گوه گردیده و نهایتا" کاهش نشست می گردد.
https://ceej.aut.ac.ir/article_3014_e4254d068f14b853da2864261641e276.pdf
2019-08-23
557
574
10.22060/ceej.2018.13759.5471
مدفن زباله جامد شهری
لاینر ژئوسنتتیکی
جداسازی لرزهای
میز لرزه
FLAC 2D
وحید
میرحاجی
v.mirhaji@srbiau.ac.ir
1
دانشجوی دکتری عمران، دانشکده فنی، دانشگاه آزاد اسلامی واحد علوم و تحقیقات
AUTHOR
یاسر
جعفریان
yjafarianm@gmail.com
2
پژوهشکده مهندسی ژئوتکنیک، پژوهشگاه بینالمللی زلزلهشناسی و مهندسی زلزله، تهران، ایران
LEAD_AUTHOR
محمد حسن
بازیار
baziar@iust.ac.ir
3
دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران، تهران، ایران
AUTHOR
محمدکاظم
جعفری
jafari@iiees.ac.ir
4
استاد، پژوهشکده مهندسی ژئوتکنیک، پژوهشگاه بینالمللی زلزلهشناسی و مهندسی زلزله، تهران، ایران
AUTHOR
[1] K. Han, C. Yun-min, L. Dao-sheng, W. Zhen-tong, Stabil- ity and Permanent Displacements Analysis of Wasteland During Earthquakes, Acta Seismologica Sinica, 14(2) (2001) 216-224.
1
[2] M.G. Ayoola, H.I. Inyang, V.O. Ogunro, Analyses of Seis- mic Damage to Interfaces in Waste Containment Systems: A Re- view, Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 9(4) (2005) 292-304.
2
[3] N. Matasovic, E. Kavazanjian, Seismic Response of a Composite Landfill Cover, Journal of Geotechnical and Geoen- vironmental Engineering, 132(4) (2006) 448-455.
3
[4] E.J. Kavazanjian, 11th Peck Lecture: Predesign Geotech- nical Investigation for the OII Superfund Site Landfill, Journal of Geotechnical and Geoenvironmental Engineering, 139(11) (2013) 1849-1863.
4
[5] F. Castelli, V. Lentini, M. Maugeri, Stability Analysis of Landfills in Seismic Area, in: Geo-Congress 2013, 2013.
5
[6] G.N. Richardson, E.J. Kavazanjian, N. Matasovic, RCRA Subtitle D (258): Seismic Design Guidance for Municipal Solid Waste Landfill Facilities, EPA/600/R-95/051, U.S. Environmen- tal Protection Agency, Cincinnati, Ohio : Risk Reduction Engi- neering Laboratory, Office of Research and Development, 1995.
6
[7] E.J. Kavazanjian, Seismic Design of Solid Waste Con- tainment Facilities, in: Proceedings of the Eight Canadian Con- ference on Earthquake Engineering, Vancouver, BC, 1999, pp. 51-89.
7
[8] N. Matasovic, E. Kavazanjian, A. Augello, J.D. Bray, R.B. Seed, Solid Waste Landfill Damage Caused by 17 January 1994 Northridge, in: Woods, Mary C. and Seiple, Ray W., Eds., The Northridge, California, Earthquake of 17 January 1994, Califor- nia Department of Conservation, Division of Mines and Geology, 1995, pp. 221-229.
8
[9] M.K. Yegian, U. Kadakal, Geosynthetic Interface Behav- ior under Dynamic Loading, Geosynthetics International, 5(1-2) (1998) 1-16.
9
[10] C.A. Kircher, 2009 NEHRP Recommended Seismic Pro- visions: Design Examples, FEMA P-750, 2009.
10
[11] M.K. Yegian, A. M. Lahlaf, Dynamic Interface Shear Strength Properties of Geomembranes and Geotextiles, Journal of Geotechnical Engineering, 118(5) (1992) 760-779.
11
[12] M.K. Yegian, U. Kadakal, Foundation Isolation for Seis- mic Protection Using a Smooth, Journal of Geotechnical and Geoenvironmental Engineering, 130(11) (2004) 1121-1130.
12
[13] S.A. Harati, R.J. Jamshidi, A. Abdollahi-Nasab, Landfill Gas Extraction Potential from Conventional Landfills-Case Study
13
of Kahrizak Landfill, in: IWWG International Waste Working Group, Specialized Session C, Waste-to-Energy Research and Technology Council, October, 2007.
14
[14] H. Zafarani, B. Hassani, A. Ansari, Estimation of earth- quake parameters in the Alborz seismic zone, Iran using general- ized inversion method, Soil Dynamics and Earthquake Engineer- ing, 42(Supplement C) (2012) 197-218.
15
[15] Islamic Republic News Agency (IRNA), Retrieved from http://www.irna.ir/fa/News/278262, (2012, July 10).
16
[16] Iranian Students News Agency (ISNA), Retrieved from https://www.isna.ir/news/96021106503, (2017, May 1).
17
[17] Maps, G. (2016). Aerial and Three-dimensional View of the OII Landfill [Aradkooh waste processing plant]. 2014, Re- trieved from Https://www.google.com/maps, (2015, May 10)
18
[18] Iran Bana Arian, Geosynthetic Data Sheet, Retrieved from http://ibagroup.ws/?page_id=449, (2015, Jan 14).
19
[19] R.M. Koerner. Designing with Geosythetics, Second Edi- tion, Prentice-Hall, Englewood Cliffs, NJ, 1(1990).
20
[20] S. Iai, Similitude for Shaking Table Tests on Soil-Struc- ture-Fluid Model in 1g Gravitational Field, Soils and Founda- tions, 29(1) (1989) 105-118.
21
[21] P.J. Meymand, Shaking Table Scale Model Tests of Non- linear Soil-Pile-Superstructure Interaction in Soft Clay, Univer- sity of California, Berkeley, 1998.
22
[22] N. Matasovic, E.J. Kavazanjian, Cyclic Characterization of OII Landfill Solid Waste, Journal of Geotechnical and Geoen- vironmental Engineering, 124(3) (1998) 197-210.
23
[23] E.J. Kavazanjian, N. Matasovic, R. Bonapart, G.R. Schmertmann, Evaluation of MSW Properties for Seismic Anal- ysis, New Orleans, LA, 1995.
24
[24] P. Yuan, E.J. Kavazanjian, W. Chen, B. Seo, Composi- tional Effects on the Dynamic Properties of Municipal Solid Waste, Waste Management, 31(12) (2011) 2380-2390.
25
[25] G.A. Ordonez, SHAKE2000: A Computer Program for the 1-D Analysis of Geotechnical Earthquake Engineer- ing Problems, in: User’s Manual, Geomotions, LLC, Lacey, Washington, 2010.
26
[26] M.K. Yegian, M. Catan, Soil Isolation for Seismic Pro- tection Using a Smooth Synthetic Liner, Journal of Geotechnical and Geoenvironmental Engineering, 130(11) (2004) 1131-1139.
27
[27] D. Zekkos, J.D. Bray, E.J. Kavazanjian, N. Matasovic,
28
E.M. Rathje, M.F. Riemer, K.H. Stokoe, Unit Weight of Munici- pal Solid Waste, Journal of Geotechnical and Geoenvironmental Engineering, 132(10) (2006) 1250-1261.
29
[28] N. Shariatmadari, A.H. Sadeghpour, F. Razaghian, Ef- fects of Aging on the Shear Strength Behavior of Municipal Solid Waste, International Journal of Civil Engineering, 12(3) (2014) 226-237.
30
[29]E.J. Triplett, P.J. Fox, Shear Strength of HDPE Geomem brane/Geosynthetic Clay Liner Interfaces, Journal of Geotechni- cal and Geoenvironmental Engineering, 127(6) (2001) 543-552.
31
ORIGINAL_ARTICLE
مدلسازی و بهینهسازی جذب رنگزای کاتیونی کریستال بنفش در راکتور ناپیوسته
نانوصفحات گرافن ا کساید به روش اصالح شده هامر سنتز و با استفاده از آنالیزهایمیکروسکوپ الکترونی روبشی (SEM ،)طیف سنجی پراش پرتو ایکس (XRD )و طیف سنجی تبدیل فوریه مادون قرمز (FTIR )شناسایی شد. روش نانوصفحات گرافن ا کساید استفاده شد. فا کتورهای موثر بر فرآیند جذب شامل pH( 4-9 ،)دوز جاذب )0/4-0/05 گرم بر ِ آماری پاسخ سطحی (RSM )برای بهینهسازی فا کتورهای موثر بر فرآیند جذب رنگزای کاتیونی کریستال بنفش بوسیله لیتر(، غلظت اولیه رنگزا )400-50 میلیگرم بر لیتر( و دما )40-10 درجه سلسیوس( در را کتور جذب ناپیوسته مطالعه شدند. براساس پیشبینی مدل رگرسیون چندجملهای، ظرفیت جذب گرافنا کساید و راندمان حذف کریستال بنفش در شرایط بهینه )4/7pH ،=دوز جاذب 0/19 گرم برلیتر، غلظت اولیه 100 میلیگرم بر لیتر و دمای 30/4 درجه سلسیوس( به ترتیب 474 میلیگرم بر گرم و 90 درصد به دست آمد. از بین عوامل موثر ، غلظت اولیه رنگزا و دوز جاذب به ترتیب با 51/6 و 41/7 درصد، بیشترین اثرگذاری را بر فرآیند جذب نشان دادند. سینتیک فرآیند جذب با استفاده از مدلهای سینتیکی شبه مرتبه اول، شبه مرتبه دوم و نفوذ درونذرهای و ایزوترم جذب با استفاده از مدلهای ایزوترمی النگمیر و فرندلیچ مدلسازی و تحلیل شد. نتایج به دست آمده همبستگی بسیار باالی سینتیک جذب با مدل شبه مرتبه دوم و ایزوترم جذب با مدل النگمیر را نشان داد. مطالعات ترمودینامیکی نشان داد که فرآیند جذب گرما گیر و خودبه خودی فرآیند جذب بود.
https://ceej.aut.ac.ir/article_2813_4771987e570b5aacd54e1b39291392df.pdf
2019-08-23
575
584
10.22060/ceej.2018.13445.5410
گرافناکساید
جذب ناپیوسته
رنگزای کاتیونی کریستال بنفش
بهینهسازی
RSM
حبیب
کولیوند
h_koulivand@sbu.ac.ir
1
گروه فناوری محیط زیست، پژوهشکده علوم محیطی، دانشگاه شهید بهشتی، تهران، ایران
AUTHOR
افسانه
شهبازی
a_shahbazi@sbu.ac.ir
2
عضو هیات علمی دانشگاه شهید بهشتی
LEAD_AUTHOR
[1] M.T. Yagub, T.K. Sen, S. Afroze, H.M. Ang, Dye and its re- moval from aqueous solution by adsorption: a review, Advances in colloid and interface science, 209 (2014) 172-184.
1
[2] C. Li, T. Lou, X. Yan, Y.-z. Long, G. Cui, X. Wang, Fabrica- tion of pure chitosan nanofibrous membranes as effective absor- bent for dye removal, International Journal of Biological Macro- molecules, (2017).
2
[3] X. Xiao, F. Zhang, Z. Feng, S. Deng, Y. Wang, Adsorptive removal and kinetics of methylene blue from aqueous solution using NiO/MCM-41 composite, Physica E: Low-dimensional Systems and Nanostructures, 65 (2015) 4-12.
3
[4] A. Mittal, J. Mittal, A. Malviya, D. Kaur, V. Gupta, Adsorp- tion of hazardous dye crystal violet from wastewater by waste materials, Journal of Colloid and Interface Science, 343(2) (2010) 463-473.
4
[5] J.J. Jones, J.O. Falkinham, Decolorization of malachite green and crystal violet by waterborne pathogenic mycobacteria, An- timicrobial agents and chemotherapy, 47(7) (2003) 2323-2326.
5
[6] K.P. Singh, S. Gupta, A.K. Singh, S. Sinha, Optimizing ad- sorption of crystal violet dye from water by magnetic nanocom- posite using response surface modeling approach, Journal of Hazardous Materials, 186(2) (2011) 1462-1473.
6
[7] A.M. Donia, A.A. Atia, W.A. Al-amrani, A.M. El-Nahas, Ef- fect of structural properties of acid dyes on their adsorption be- haviour from aqueous solutions by amine modified silica, Journal of hazardous materials, 161(2) (2009) 1544-1550.
7
[8] J.-H. Deng, X.-R. Zhang, G.-M. Zeng, J.-L. Gong, Q.-Y. Niu, J. Liang, Simultaneous removal of Cd (II) and ionic dyes from aque- ous solution using magnetic graphene oxide nanocomposite as an adsorbent, Chemical Engineering Journal, 226 (2013) 189-200.
8
[9] A. Elsagh, O. Moradi, A. Fakhri, F. Najafi, R. Alizadeh, V. Haddadi, Evaluation of the potential cationic dye removal using adsorption on graphene and carbon nanotubes, Arabian Journal of Chemistry, (2013).
9
[10] B. Hameed, I. Tan, A. Ahmad, Optimization of basic dye removal by oil palm fibre-based activated carbon using response surface methodology, Journal of hazardous materials, 158(2) (2008) 324-332.
10
[11] K. Ravikumar, S. Ramalingam, S. Krishnan, K. Balu, Appli- cation of response surface methodology to optimize the process variables for reactive red and acid brown dye removal using a novel adsorbent, Dyes and pigments, 70(1) (2006) 18-26.
11
[12] M. Arulkumar, P. Sathishkumar, T. Palvannan, Optimization of Orange G dye adsorption by activated carbon of Thespesia populnea pods using response surface methodology, Journal of hazardous materials, 186(1) (2011) 827-834.
12
[13] A. Fakhri, Adsorption characteristics of graphene oxide as a solid adsorbent for aniline removal from aqueous solutions: Ki- netics, thermodynamics and mechanism studies, Journal of Saudi Chemical Society, (2013).
13
[14] S. Debnath, A. Maity, K. Pillay, Impact of process param- eters on removal of Congo red by graphene oxide from aqueous solution, Journal of Environmental Chemical Engineering, 2(1) (2014) 260-272.
14
[15]R. Kumar, R. Ahmad, Biosorption of hazardous crystal violet dye from aqueous solution onto treated ginger waste (TGW), De-salination, 265(1) (2011) 112-118.
15
[16] P.D. Saha, S. Chakraborty, S. Chowdhury, Batch and contin- uous (fixed-bed column) biosorption of crystal violet by Artocar- pus heterophyllus (jackfruit) leaf powder, Colloids and Surfaces B: Biointerfaces, 92 (2012) 262-270.
16
[17]R. Sen, T. Swaminathan, Response surface modeling and op- timization to elucidate and analyze the effects of inoculum age and size on surfactin production, Biochemical Engineering Jour- nal, 21(2) (2004) 141-148.
17
[18]H.-L. Liu, Y.-W. Lan, Y.-C. Cheng, Optimal production of sulphuric acid by Thiobacillus thiooxidans using response surface methodology, Process Biochemistry, 39(12) (2004) 1953-1961.
18
[19] Y. Bulut, H. Aydın, A kinetics and thermodynamics study of methylene blue adsorption on wheat shells, Desalination, 194(1) (2006) 259-267.
19
[20] M.A.M. Salleh, D.K. Mahmoud, W.A.W.A. Karim, A. Idris, Cationic and anionic dye adsorption by agricultural solid wastes: A comprehensive review, Desalination, 280(1) (2011) 1-13. [21]S. Chowdhury, R. Mishra, P. Saha, P. Kushwaha, Adsorption thermodynamics, kinetics and isosteric heat of adsorption of mal- achite green onto chemically modified rice husk, Desalination, 265(1) (2011) 159-168.
20
[22] P. Wang, M. Cao, C. Wang, Y. Ao, J. Hou, J. Qian, Kinet- ics and thermodynamics of adsorption of methylene blue by a magnetic graphene-carbon nanotube composite, Applied Surface Science, 290 (2014) 116-124.
21
[23]R.-S. Juang, F.-C. Wu, R.-L. Tseng, Mechanism of adsorp- tion of dyes and phenols from water using activated carbons pre- pared from plum kernels, Journal of colloid and interface science, 227(2) (2000) 437-444.
22
[24] K. Vijayaraghavan, T. Padmesh, K. Palanivelu, M. Velan, Biosorption of nickel (II) ions onto Sargassum wightii: appli- cation of two-parameter and three-parameter isotherm models, Journal of Hazardous Materials, 133(1) (2006) 304-308.
23
[25] L. Eskandarian, M. Arami, E. Pajootan, Evaluation of ad- sorption characteristics of multiwalled carbon nanotubes modi- fied by a poly (propylene imine) dendrimer in single and multiple dye solutions: Isotherms, kinetics, and thermodynamics, Journal of Chemical & Engineering Data, 59(2) (2014) 444-454.
24
ORIGINAL_ARTICLE
ارزیابی آسیب پذیری لرزه ای ساختمان های بتن آرمه مقاوم سازی شده با روش ژاکت فولادی ستون ها به روش احتمالاتی
در این تحقیق با انجام مطالعات میدانی وسیع در ساختمان های ساخته شده شمال کشور با بررسی ضعف های متعارف اجرایی، عملکرد لرزهای ساختمان های بتن آرمه با سیستم قاب خمشی کوتاه، متوسط و بلند مرتبه بررسی گردید. ضعف سازهای از جمله مقاومت کم بتن و طول نا کافی وصله میلگردهای ستونها در مدلسازیها در نظر گرفته شد. مدلها به صورت سه بعدی تحت بیست رکورد دور از گسل زلزله در نرم افزار اوپنسیس تحلیل دینامیکی غیرخطی فزاینده شدند. سپس به روشهای احتمالاتی و با در نظر گیری عدم قطعیتهای موثر شامل مقاومت بتن و مشخصات زلزله، احتمال آسیب پذیری لرزه ای و منحنی شکنندگی این ساختمانها ترسیم گردید. در گام بعدی ستونهای سازهها با استفاده از ژا کت فولادی مقاوم سازی شدند و میزان خسارت لرزه ای آنها در سطوح عملکردی مختلف به کمک منحنی های شکنندگی لرزه ای بدست آمد. با مقایسه مقادیر میانه شکنندگی لرزه ای مدلهای دارای ضعف سازه ای و مدلهای مقاوم سازی شده مشاهده گردید که در ساختمان های مورد بررسی مقادیر میانه شکنندگی لرزه ای بطور چشمگیری در مدلهای مقاوم سازی شده افزایش یافته است. ضمنا مشاهده گردید که اثربخشی روش مقاوم سازی در نظر گرفته شده علاوه بر سطح آسیب به تعداد طبقات ساختمان نیز بستگی دارد.
https://ceej.aut.ac.ir/article_2809_08d76cdaa4a464c3e4db5a255c97363a.pdf
2019-08-23
585
598
10.22060/ceej.2018.13692.5459
ارزیابی آسیب پذیری
مقاوم سازی
ژاکت فولادی
منحنی شکنندگی
نرم افزار اوپنسیس
حسین
پهلوان
pahlavan@shahroodut.ac.ir
1
استادیار گروه سازه و زلزله دانشکده عمران، دانشگاه صنعتی شاهرود
AUTHOR
علی
ناصری
eng_alinaseri@yahoo.com
2
دانشجوی دکترای عمران سازه، دانشگاه صنعتی نوشیروانی بابل، ایران
LEAD_AUTHOR
آرمین
عین اللهی
armin_e59@yahoo.com
3
کارشناسی ارشد مهندسی عمران، موسسه آموزش عالی پردیسان مازندران
AUTHOR
[1] Handbook on seismic retrofit of building, 2007. Central pub- lic works department and INDIAN building congress in associa- tion with INDIAN institute of technology-MADRAS, chapter 9.
1
[2] Fardis, M.N., 2009. Seismic design, assessment and retrofitting of concrete buildings: based on EN-Eurocode 8(Vol. 8). Springer Science & Business Media.
2
[3] Code No. 360, 2007. Islamic Republic of Iran, Management and Planning Organization, Instruction for Seismic Rehabilitation of Existing Buildings.
3
[4] Chai, Y.H., Priestley, M.N. and Seible, F., 1994. “Analytical model for steel-jacketed RC circular bridge columns”. Journal of Structural Engineering, 120(8), pp.2358-2376.
4
[5] Aboutaha, R.S., Engelhardt, M.D., Jirsa, J.O. and Kreger, M.E., 1999. “Rehabilitation of shear critical concrete columns by use of rectangular steel jackets”. Structural Journal, 96(1), pp.68- 78.
5
[6] Shinozuka, M., Kim, S.H., Kushiyama, S. and Yi, J.H., 2002. “Fragility curves of concrete bridges retrofitted by column jacketing”. Earthquake Engineering and Engineering Vibration, 1(2), pp.195-205.
6
[7] Xiao, Y. and Wu, H., 2003. “Retrofit of reinforced concrete columns using partially stiffened steel jackets”. Journal of Structural Engineering, 129(6), pp.725-732.
7
[8] Smyth, A.W., Altay, G., Deodatis, G., Erdik, M., Franco, G., Gülkan, P., Kunreuther, H., Luş, H., Mete, E., Seeber, N. and Yüzügüllü, O., 2004. “Probabilistic benefit-cost analysis for earthquake damage mitigation: Evaluating measures for apartment houses in Turkey”. Earthquake Spectra, 20(1), pp.171- 203.
8
[9] Aziminejad, A.S. and Moghadam, A., 2007. “Effects of strength distribution on fragility curves of asymmetric single story building”, Proceedings of the Ninth Canadian Conference on Earthquake Engineering Ottawa, Ontario, Canada.
9
[10] Barkhordary, M. and Tariverdilo, S., 2011. “Vulnerability of ordinary moment resistant concrete frames”. Earthquake Engineering and Engineering Vibration, 10(4), pp.519-533.
10
[11] Abdel-Hay, A.S. and Fawzy, Y.A.G., 2015. “Behavior of partially defected RC columns strengthened using steel jackets”. HBRC Journal, 11(2), pp.194-200.
11
[12] Belal, M.F., Mohamed, H.M. and Morad, S.A., 2015. “Behavior of reinforced concrete columns strengthened by steel jacket”. HBRC Journal, 11(2), pp.201-212.
12
[13] Vecchio, F.J. and Emara, M.B., 1992. “Shear deformations in reinforced concrete frames”. ACI Structural Journal, 89(1), pp.46-56.
13
[14] Standard No. 2800., 2005. Iranian code of practice for seismic resistant design of building. Third ed., Building and Housing Research Center, BHRC publication, Tehran.
14
[15] Mazzoni, S., McKenna, F. and Fenves, G.L., 2005.OpenSees command language manual”. Pacific Earthquake Engineering Research (PEER) Center, 264.
15
[16] Ramanathan, N.K. (2012), “Next generation seismic fragility curves for California bridges incorporating the evolution in seismic design philosophy,” Ph.D. thesis, Georgia Institute of Technology, Atlanta
16
[17] Elnashai, A.S., Pinho, R. and Antoniou, S., 2000. “INDYAS-A Program for Inelastic Dynamic Analysis of Structures”. Engineering Seismology and Earthquake Engineering Report No. ESEE 00-2, Imperial College, London.
17
[18] Mander, J.B., Priestley, M.J. and Park, R., 1988. “Theoretical stress-strain model for confined concrete”. Journal of structural engineering, 114(8), pp.1804-1826.
18
[19] Pacific Earthquake Engineering Research Center, Regents of the University of California, web site: http://peer.berkeley.edu/ smcat/sites.html
19
[20] FEMA. Quantification of building seismic performance factors. FEMA P695. 2009. Federal Emergency Management Agency, Washington, DC.
20
[21] Anagnos, T., Rojahn, C. and Kiremidjian, A., 1995. “NCEER-ATC joint study on fragility of buildings”.
21
[22] Murao, O. and Yamazaki, F., 2000. “Development of fragility curves for buildings in Japan”. Confronting Urban Earthquakes: Report of Fundamental Research on the Mitigation of Urban Disasters Caused by Near-Field Earthquakes, pp.226-230.
22
[23] Nielson, B.G., 2005. “Analytical Fragility curves for highway bridges in moderate seismic zones”. A Thesis presented for PHD degree. School of civil and environmental engineering Georgia institute of Technology, 400 pp.
23
[24] HAZUS-MH MR5, 2003. “Multi-Hazard loss Estimation Methodology, Earthquake Model.” Washington, DC, USA: Federal Emergency Management Agency.
24
[25] Sakino, K. and Sun, Y., 2000, January. “Steel jacketing for improvement of column strength and [26[ ductility”. In 12th world conference earthquake engineering (Vol. 1985).
25
[26] Priestley, M. J. N., Seible, F., and Calvi, G. M., 1996. “Seis- mic Design and Retrofit of Bridges”, John Wiley & Sons.
26
ORIGINAL_ARTICLE
شناسایی و اولویت بندی ریسک های پروژه های ساختمانی سبز مبتنی بر تلفیق روش های FDEMATEL) و :(FANP (مطالعه موردی: شهرستان سوادکوه)
ساختمان سبز روندی است که با محیط زیست و حفظ منابع طبیعی درطول چرخه عمر ساختمان سازگار می باشد. وجود ریسک در پروژه های ساختمانی سبز موجب کاهش دقت در تخمین مناسب اهداف پروژه شده و از کارآیی پروژه های ساختمانی سبز می کاهد. بنابراین شناسایی و اولویت بندی ریسک می تواند نقش بسزایی در موفقیت پروژه های ساختمانی سبز داشته باشد. در پژوهش حاضر با ارائه مدلی جامع از کلیه معیارها و شاخص های ریسک های پروژه های ساختمانی سبز، شاخص های ریسک های پروژه های ساختمانی سبز اولویت بندی شدند . بدین منظور در گام اول به شناسایی و غربال شاخص ها از دیدگاه کارشناسان پروژه های ساختمانی سبز با استفاده از تکنیک دلفی فازی پرداخته شد، و در ادامه روش نوینی به کمک ترکیب نتایج فرآیند تحلیل شبکه ای و تکنیک دیمتل در شرایط فازی( F. DEMATEL) برای رتبه بندی و ارزیابی روابط علی و معلول بین عوامل به کار برده شده است، و در نهایت اولویت بندی نهایی شاخص های ریسک های پروژه های ساختمانی سبز، با لحاظ نتایج گام های اولیه و با استفاده از فرآیند تحلیل شبکه فازی و تکنیک دیمتل در نرم افزار super decision صورت گرفته است. نتایج در پژوهش حاضر نشان می دهد که ریسک های مربوط به کیفیت بد مواد و نامناسب بودن تجهیزات اهمیت بالایی برخوردار هستند و نداشتن مقیاس برای هزینه فعالیت ها دارای کم ترین اهمیت می باشد.
https://ceej.aut.ac.ir/article_2768_44dd71018a7d2d30335bc32f58656c97.pdf
2019-08-23
599
616
10.22060/ceej.2017.13302.5398
مدیریت ریسک
ریسک پروژه
پروژه های ساختمانی سبز
تجزیه و تحلیل سلسله مراتبی فازی
تکنیک دیمتل فازی
جواد
قبادی
javad.ghobadi1371@gmail.com
1
گروه مهندسی صنایع، دانشگاه علوم و فنون مازندران، بابل، ایران
AUTHOR
جواد
رضائیان
j.rezaeian@ustmb.ac.ir
2
گروه مهندسی صنایع، دانشگاه علوم و فنون مازندران، بابل، ایران
LEAD_AUTHOR
مصطفی
حاجی آقایی کشتلی
mostafahaji@gmail.com
3
گروه مهندسی صنایع، دانشگاه علم و فناوری بهشر
AUTHOR
Dinarwandi, M., et al., Management Health, Safety and Envi- ronment in Urban Parks (Case Study: District 6 of Tehran Mu- nicipality). Environmental, 2013. 39(3): p. 75-90. (In Persian)
1
Kalantar, S., A. Esmaeili, and M. Rafiee, Quality Review of Green Building Standards. First National Conference on Green Building, 2013. (In Persian)
2
SadatiSeyedMahallah, E., Green Building - How to Build Green Building in Iran. Second Conference on Environmental Planning and Management; Clean Energy Expansion, 2012. (In Persian)
3
Institute, P.M., Project Management Body of Knowledge. 3rd ed. 2004: Project Management Institute.
4
Nazari, A., E. Forsatkar, and K. Behrad, Project risk manage- ment. 2008: Presidency, Vice President of Strategic Planning and Supervision, Academic Records Center, Museum & Publication. (In Persian)
5
Nazari, A. and M. Jabari, Project Risk Identification with Risk Fracture Structure Design Approach, Case Study: Project-Based Industrial Organization. International Journal of Industrial Engi- neering and Production Management, 2015. 26(1). (In Persian)
6
Lee, E., Y. Park, and J.G. Shin, Large engineering project risk management using a Bayesian belief network. Expert Systems with Applications, 2009. 36(3): p. 5880-5887.
7
Ardeshir, A., et al., Green Building Design with the Purpose of Saving and Optimizing Energy Consumption. First Conference on Electrical and Computer Engineering in the North, 2014. (In Persian)
8
ASL, Y.F., Identifying and Prioritizing the Risks to Green Building Projects using ANP. Second National Conference on Architecture, Civil Engineering and Urban Environment, 2014. (In Persian)
9
Yang, R.J. and P.X. Zou, Stakeholder-associated risks and their interactions in complex green building projects: A social network model. Building and Environment, 2014. 73: p. 208-222.
10
Nejad, R.G., Risk of Green Building Projects (Especially Safety Risks and Stakeholders). Fourth International Congress on Urban Development and Development, 2016. (In Persian)
11
Akbari, S., S.M.J. Hosseini, and A.S. Asl, Prioritizing Safety Risks for Green Buildings Using the LEED Standard. First Na- tional Conference on Civil Engineering and Sustainable Devel- opment of Iran, 2014. (In Persian)
12
Zhai, X., et al., Solar integrated energy system for a green building. Energy and buildings, 2007. 39(8): p. 985-993.
13
Paul, W.L. and P.A. Taylor, A comparison of occupant com fort and satisfaction between a green building and a conventional building. Building and Environment, 2008. 43(11): p. 1858-1870.
14
Ferrante, A. and G. Mihalakakou, The influence of water, green and selected passive techniques on the rehabilitation of his- torical industrial buildings in urban areas. Solar Energy, 2001. 70(3): p. 245-253.
15
Habibi, A., S. Izadbar, and A. Sarafrazi, Fuzzy Multi-criteria Decision Making. 2014: Katib Gil Publishing. (In Persian)
16
Kunadhamraks, P. and S. Hanaoka, Evaluating the logistics performance of intermodal transportation in Thailand. Asia Pa- cific Journal of Marketing and Logistics, 2008. 20(3): p. 323-342.
17
Bojadziev, G. and M. Bojadziev, Fuzzy logic for business, finance, and management. Vol. 23. 2007.
18
Lee, A.H., W.-C. Chen, and C.-J. Chang, A fuzzy AHP and BSC approach for evaluating performance of IT department in the manufacturing industry in Taiwan. Expert systems with ap- plications, 2008. 34(1): p. 96-107.
19
Hodesh, M.M., Optimal Location of Uncentricated Power Plants in Yazd Province Using FANP Fuzzy Network Analysis, in Industrial Engineering - Economic and Social Systems. 2009, Mazandaran University of Science and Technology. (In Persian)
20
Mehregan, M.R., Advanced Operational Research. 2016:Academic Edition. (In Persian)
21
Khaksar, M., R. Shafei, and B.A. VeSi, Building of risk sourc- es in construction projects and their management. Productivity Management, 2009. 2(4): p. 139-160. (In Persian)
22
Etminanmoghaddam, F., Analysis of the Building of common risks in construction projects. Second Project Management Con- ference, 2005. (In Persian)
23
Aminzadeh, R. and A.M. Mahani, Building and Prioritization of Effective Risks in Construction Projects and their Causes. Sec- ond International Conference on Engineering, Science and Tech- nology, 2015. (In Persian)
24
Taghizadeh, M., J.B. Sofi, and M.M. Afshar, Identifying and Prioritizing the Risks of Technology Collaboration Projects (Bio- technology). Emplate Management Technology Development, 2014. 2(3): p. 9-33. (In Persian)
25
Zebardast, E., Application of Analytical Hierarchy Process in Urban and Regional Planning. Journal of Architecture & Urban Development -Beautiful arts, 2010. 2(41): p. 79-90. (In Persian)
26
Sadeghi, S. and N. Sadeghi, Green Building and Opti- mizing Energy Consumption. The First Regional Conference on Civil Engineering and Architecture, 2011. (In Persian)
27