ORIGINAL_ARTICLE
مطالعه عددی تاثیر درزههای سگمنتی و فشار تزریق بر رفتار پوشش سگمنتی تونل(مطالعه موردی: تونل انتقال آب سبزکوه)
چکیده: ماشین تونلزنی (TBM) کاربرد گسترده ای در حفر مکانیزه ی تونل های طویل در سنگ سخت دارد. در صورت انتخاب ماشین تونلزنی سپری، از سگمنت های پیش ساخته ی بتنی به عنوان پوشش دائمی تونل استفاده می شود. این نوع پوشش ذاتاً ناپیوسته بوده و فرض یکپارچگی آن جهت ساده سازی در مطالعات تحلیلی و عددی نمی تواند فرض کاملی باشد. پوشش سگمنتی، تحت بارهای مختلف وارده از سمت زمین، ماشین تونلزنی و فرایندهای مختلف تونل سازی (مانند تزریق) رفتار خاصی از خود نشان می دهد که متفاوت از پوشش یکپارچه (بدون درزه) است. در این مقاله رفتار پوشش سگمنتی تونل انتقال آب سبزگوه با تخصیص مقادیر سختی نرمال و برشی برای درزه های طولی و عرضی مابین سگمنت ها تحلیل و با حالت پوشش یکپارچه مقایسه شده است. همچنین تاثیر فشار دوغاب تماسی مابین سنگ و سگمنت ها بر رفتار پوشش سگمنت تونل بررسی شده است. طبق نتایج به دست آمده از مدلسازی عددی انجام شده در این مقاله توسط روش تفاضل محدود و تحت باریکنواخت تزریق، بیشینه نیروهای داخلی در موقعیت درزه های سگمنتی رخ می دهد. همچنین با افزایش فشار تزریق، نیروی محوری و ممان خمشی در درزه های سگمنتی کاهش می یابد. علاوه بر این، افزایش فشار تزریق می تواند موجب افزایش جابجایی ها در پوشش سگمنتی شود. در واقعیت، چنانچه مقدار این جابجایی ها از مقدار جابجایی مجاز بیشتر باشد امکان ترک خوردن سگمنت ها و یا پله شدگی بین آن ها وجود دارد.
https://ceej.aut.ac.ir/article_941_3cda0665980c4bbd26d9eb4592d3334d.pdf
2018-04-21
3
18
10.22060/ceej.2017.11284.5002
حفاری مکانیزه
پوشش سگمنتی
درزه سگمنتی
فشار تزریق
مدلسازی عددی
مرتضی
کرمی
mortezakarami@hotmail.com
1
دانشکده مهندسی معدن، نفت و ژئوفیزیک، دانشگاه صنعتی شاهرود، سمنان، ایران
LEAD_AUTHOR
شکراله
زارع
zare@shahroodut.ac.ir
2
دانشکده مهندسی معدن، نفت و ژئوفیزیک، دانشگاه صنعتی شاهرود، سمنان، ایران
AUTHOR
[1] N.A. Do, D. Dias, P. Oreste, I. Djeran-Maigre, 2D numerical investigation of segmental tunnel lining behavior, Tunneling and Underground Space Technology, 37 (2013) 115-127.
1
[2] O. Arnau, C. Molins, Three dimensional structural response of segmental tunnel linings. Engineering Structures, 44 (2012) 210-221.
2
[3] O. Arnau, C. Molins, Analytical study of the structural response of segmental tunnel linings based on an in situ loading test. Part 2: Numerical simulation, Tunnelling and Underground Space Technology, 26(6) (2011) 778-788.
3
[4] W. Wittke, C. Erichsen, J. Gattermann, Stability analysis and design for mechanized tunneling, PD-IWWCE & in Rock Ltd. (WBI), 2007.
4
[5] C. B. M. Blom, E. J. Van der Horst, P. S. Jovanovic, Three-dimensional structural analyses of the shield-driven “Green Heart” tunnel of the high-speed line south,Tunnelling and Underground Space Technology, 14(2) (1999) 217-224.
5
[6] I. Hudoba, Contribution to static analysis of load-bearing concrete tunnel lining built by shield-driven technology,Tunnelling and Underground Space Technology, 12(1) (1997) 55-58.
6
[7] C. Klappers, F. Grubl, B. Ostermeier, Structural analyses of segmental lining- coupled beam and spring analyses versus 3 D-FEM calculations with shell elements, Tunnelling and Underground Space Technology, 21(3) (2006) 254-255.
7
[8] S.Teachavorasinskun, T. Chub-uppakarn, Influence of segmental joints on tunnel lining, Tunnelling and Underground Space Technology, 25(4) (2010) 490-494.
8
[9] M. H. Ahmadi, A. Mortazavi, S. M. Davarpanah, H. Zarei, A numerical investigation of segmental lining joints interactions in tunnels-qomrud water conveyance tunnel, Civil Engineering Journal, 2(7) (2016) 334-347.
9
[10] M. Nikkhah, S. S. Mousavi, S. Zare, O. Khademhosseini, Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel), Journal of Mining and Environment, (2016).
10
[11] A. Lambrughi, L. M. Rodríguez, R. Castellanza, Development and validation of a 3D numerical model for TBM–EPB mechanized excavations. Computers and Geotechnics, 40 (2012), 97-113.
11
[12] T. Kasper, G. Meschke, A numerical study of the effect of soil and grout material properties and cover depth in shield tunneling, Computers and Geotechnics, 33(4) (2006a) 234-247.
12
[13] T. Kasper, G. Meschke, On the influence of face pressure, grouting pressure and TBM design in soft ground tunneling, Tunneling and Underground Space Technology, 21(2) (2006b) 160-171.
13
[14] T. Kasper, G. Meschke, A 3D finite element simulation model for TBM tunneling in soft ground, International journal for numerical and analytical methods in geomechanics, 28(14) (2004) 1441-1460.
14
[15] C. B. M. Blom, Design philosophy of concrete linings for tunnels in soft soils, Delft University of Technology, Netherlands, 2002.
15
[16] A. Salemi, M. Esmaeili, F. Sereshki, Normal and shear resistance of longitudinal contact surfaces of segmental tunnel linings, International Journal of Rock Mechanics and Mining Sciences, 77 (2015) 328-338.
16
[17] H. Mashimo, T. Ishimura, Evaluation of the load on shield tunnel lining in gravel, Tunneling and underground space technology, 18(2) (2003) 233-241.
17
[18] K.M. Lee, X. Y. Hou, X. W. Ge, Y. Tang, An analytical solution for a jointed shield-driven tunnel lining, International journal for numerical and analytical methods in Geomechanics, 25(4) (2001) 365-390.
18
[19] M. Karami, L. Faramarzi, R. Bagherpour, D.R. Gahrooee, Influence of geological features and geomechanical properties of rock mass on TBM selection for Sabzkouh water conveyance tunnel, in: Journal of Engineering Geology, University of Kharazmi, 2014, pp. 2169-2198.
19
[20] M. Karami, Selection of mechanized excavation and segmental lining for Sabzkouh water conveyance tunnel to Choghakhor dam, Isfahan University of Technolog, Iran, 2011 (in Persian).
20
[21] M. Karami, B. Abrah, L. Faramarzi, a practical guide for FLAC3D software, , Jahad publication, Isfahan university of technology, Iran, 2012 (in Persian).
21
[22] J. Salençon, Contraction quasi-statique d’une cavite a symetrie spherique ou cylindrique dans un milieu elastoplastique, Annales Des Ponts Et Chaussees, 4 (1969) 231-236.
22
ORIGINAL_ARTICLE
برآورد نیروی جانبی وارده بر دیوارهای حائل مجاور با خاکریزهای لایه ای تحت شرایط اشباع و غیراشباع
چکیده: بررسی وضعیت گوه شکست خاکریز پشت دیوار حایل به لحاظ نحوه ی توسعه یافتگی و ابعاد هندسی آن، مبین نحوه حرکت دیوار و میزان تخریب کنندگی ناشی از آن می باشد. در شرایط طبیعی خاکریزها به گونه ای هستند که عمدتاً لایه ای بوده و گاهی تحت شرایط اشباع شدن قرار می گیرند. از این رو تحقیق حاضر بر مبنای بررسی آزمایشگاهی گوه شکست حاصل از دوران دیوار حول پاشنه پایه گذاری گردید و اندازه گیری های فیزیکی لازم، جهت استفاده از روش ترسیمی در محاسبه نیروی ناشی از فشار جانبی خاکریزهای لایه ای در دو حالت اشباع و غیراشباع صورت پذیرفته است. برای این منظور مدل خاکریز پشت دیوار طره ای با چهار نوع لایه بندی مختلف از ترکیب دو نمونه خاک ریزدانه رسی و خاک ماسه ای ساخته شد. پروفیل عمقی خاکریزهای دو لایه ای به دو صورت شامل: لایه بالایی: رس،لایه زیرین،: ماسه، لایه بالایی: ماسه، لایه زیرین: رس و پروفیل عمقی خاکریزهای سه و چهار لایه ای به صورت لایه بالایی: ماسه، لایه میانی: رس و لایه زیرین: ماسه و لایه بالایی: رس، لایه میانی اول: ماسه، لایه میانیدوم: رس و لایه انتهایی: ماسه در پشت مدل دیوار به گونه ای طراحی و اجرا گردید که ارتفاع لایه های تشکیل دهنده هر پروفیل مساوی باشد. نتایج نشان داد: نتایج آزمایشگاهی بدست آمده که بهره برداری از روابط تئوری موجود منجر به طرح محافظه کارانه دیوار حائل و در نتیجه افزایش هزینه اجرا می شود. عدم ایجاد گوه شکست از پای دیوار بر خلاف نتایج حاصل از تئوری های کلاسیک و همچنین متوسط کاهش 32/75 و 29/25 درصدی نیروی جانبی وارده بر دیوار حاصل از داده های آزمایشگاهی نسبت به مقادیر روش های رانکین و سیرنیواسا، شاهدی بر این مدعا می باشد.
https://ceej.aut.ac.ir/article_988_d077ddcd8a159788ae2e40332fa3bde7.pdf
2018-04-21
19
30
10.22060/ceej.2017.11859.5090
دیوار حائل
نیروی جانبی
خاکریز لایه ای اشباع
گوه شکست
میلاد
بختیار
milad.bakhtiar1989@yahoo.com
1
دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز، خوزستان، ایران
AUTHOR
جواد
احدیان
ja_ahadiyan@yahoo.com
2
دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز، خوزستان، ایران
LEAD_AUTHOR
[1] Ahadiyan, H. M. J. Effect of Unsaturated Soil texture and Compaction in Experimental Analysis and River Retaining Wall Failure Wedge Elastoplasticity. Irrigation Sciences and Engineering, 40 (2016) 197-212. (in Persian)
1
[2] Aouria, S. S. A. The study of lateral earth pressures acting on retaining walls due to the displacement modes. 1th National Congress On Civil Engineerin, (2014). (in Persian)
2
[3] Benmebarek, N., Labdi, H., & Benmebarek, S. A numerical study of the active earth pressure on a rigid retaining wall for various modes of movements. Soil Mechanics and Foundation Engineering, 53(1) (2016) 39-45.
3
[4] Brown v. Board of Education, No. No. 1, 347 483 (Supreme Court 1954).
4
[5] Chen, L. Active earth pressure of retaining wall considering wall movement. European Journal of Environmental and Civil Engineering, 18(8) (2014) 910-926.
5
[6] Fang, Y.-S., Chen, T.-J., & Wu, B.-F. Passive earth pressures with various wall movements. Journal of Geotechnical Engineering, 120(8) (1994) 1307-1323.
6
[7] Liu, F. Lateral earth pressures acting on circular retaining walls. International Journal of Geomechanics, 14(3) (2013) 04014002.
7
[8] Mei, G., Chen, Q., & Song, L. Model for predicting displacement-dependent lateral earth pressure. Canadian Geotechnical Journal, 46(8) (2009) 969-975.
8
[9] Nadukuru, S. S., & Michalowski, R. L. Arching in distribution of active load on retaining walls. Journal of geotechnical and geoenvironmental engineering, 138(5) (2012) 575-584.
9
[10] Niedostatkiewicz, M., Lesniewska, D., & Tejchman, J. Experimental analysis of shear zone patterns in cohesionless for earth pressure problems using particle image velocimetry. Strain, 47(s2) (2011) 218-231.
10
[11] Peng, S.-q., Li, X.-b., Ling, F., & Liu, A.-h. A general method to calculate passive earth pressure on rigid retaining wall for all displacement modes. Transactions of Nonferrous Metals Society of China, 22(6) (2012) 1526-1532.
11
[12] Rao, P., Chen, Q., Zhou, Y., Nimbalkar, S., & Chiaro, G. Determination of active earth pressure on rigid retaining wall considering arching effect in cohesive backfill soil. International Journal of Geomechanics, 16(3) (2015) 04015082.
12
[13] Sobhani, R. F.-A. E. Experimental study of the effect of saturation degree variations on shear strength parameters of sand-kaolin unsaturated compositions. 4th International Conference on Sustainable development & Urban Construction (2014). (in Persian)
13
[14] Spangler, M. G., & Handy, R. L. Soil engineering. Retrieved from (1973).
14
[15] Winterkorn, H. f. a. F., H.Y. (1975). Foundation Engineering Handbook.
15
ORIGINAL_ARTICLE
بررسی کارایی متابی سولفیت سدیم و اسید اسکوربیک در حذف اکسیژن محلول آب شرب
اکسیژن محلول در تمامی آبهایی که به نحوی با اتمسفر هوا در تماس هستند، موجود میباشد و شاخصی از کیفیت آب است. حذف اکسیژن محلول از آب را تجزیه هوازدایی مینامند که به روشهای معمول مکانیکی، حرارتی و شیمیایی انجام میگیرد. در این تحقیق متابیسولفیت سدیم و اسید اسکوربیک جهت اکسیژنزدایی آب شرب بکار رفتهاند و عوامل موثر همچون زمان ماند، دما، سختی کل و تغییر PH در راندمان اکسیژنزدایی بصورت تجربی بررسی میگردند. بر اساس نتایج بدست آمده برای متابیسولفیت سدیم، با افزایش 100 درصدی زمان ماند، غلظت اکسیژن محلول حدود 60 درصد و با افزایش 10 درصدی دما، غلظت اکسیژن محلول حدود 80 درصد کاهش مییابد؛ همچنین مشاهده شد که کاهش سختی کل، راندمان اکسیژنزدایی را بصورت قابل ملاحظهای افزایش میدهد و تغییرات PH بر روی راندمان اکسیژنزدایی ماده فوق تاثیر ناچیزی دارد. بررسی اسید اسکوربیک نشان داد که با افزایش 10 درصدی دما، غلظت اکسیژن محلول حدود 40 درصد کاهش یافته و با کاهش 20 درصدی زمان ماند، غلظت اکسیژن محلول حدود 25 درصد کاهش مییابد. بررسی تاثیر PH در مورد ماده فوق نشان داد که راندمان اکسیژنزدایی در حالت بازی بهتر از حالت اسیدی میباشد.
https://ceej.aut.ac.ir/article_984_0c4e43784166ebabf57df79a82b9b44c.pdf
2018-04-21
31
36
10.22060/ceej.2017.12428.5214
اکسیژن محلول
متابیسولفیت سدیم
اسید اسکوربیک
اکسیژنزدایی
سمیه
رحمانی
somayeh66_2006@yahoo.com
1
دانشجوی کارشناسی ارشد عمران- آب و فاضلاب ، موسسه آموزش عالی خاوران، مشهد، ایران
AUTHOR
ابراهیم
علامتیان
e.alamatian@profs.khi.ac.ir
2
گروه عمران، موسسه آموزش عالی خاوران، مشهد، ایران
LEAD_AUTHOR
[1] A. Moradian, J. Sawani, Remove dissolved oxygen compensated by hydrogen in the presence of a catalyst, Power Research Institute Tehran, 1999.
1
[2] R. Najar, S.A. Ahmadi, Alternative materials deoxygenation hydrazine in boiler feed water for steam, 1999.
2
[3] A. M.Gol Mohammadi, N.Ghasemi, P.Bigdeli, Carbohydrazide production as a viable alternative to hydrazine in deoxygenation of boiler feed water, National Iranian Chemical Engineering Congress Eleventh, Tehran, Tarbiat Modares University, 2005.
3
[4] K. Vuorilehto, A.Tamminen, S.Ylasaari, Electrochemical removal of dissolved oxygen from water, Journal of applied electrochemistry, 5 (1995) 973-977.
4
[5] I. Akira, Y. Kazauki, T. Masato, F. Michio, Removal of dissolved oxygen using non-porous hollow-fiber membranes, Journal of Membrane science 145 (1998) 111-117.
5
[6] S. H. Macklin, N. Utilities, W. E. Haas, Carbon dioxide and dissolved oxygen removal from makeup water by gas transfer membranes, GE water and process technologies, 2010.
6
[7] A. Gholipour, E. Alamatian, N. Foerstner, Assessing of channel roughness and temperature variations on wastewater quality parameters using numerical modeling, Journal of Applied Sciences and Environmental Management, 19(1) (2015) 117-25.
7
[8] V. Andriès, D. Couturier, Reduction of dissolved oxygen in water: Hydrazine and its organic substitutes, Materials performance, 39(7) (2000) 58-61.
8
[9] R. Lebeuf, Y. Zhu, V. Nardello-Rataj, J. P. Lallier, J. M. Aubry, Natural polyphenols as safe alternatives to hydroquinone for the organocatalyzed reduction of dioxygen dissolved in water by diethylhydroxylamine (DEHA), Green Chemistry, 14(3) (2012) 825-31.
9
[10] C. E. Housecroft, A. G. Sharpe, Chapter 16: the group 16 elements".Inorganic chemistry, 3rd Edition. Pearson.p.520. ISBN; 978-0-13-175553-6. 2008.
10
[11] M. Y. Lachapelle, G. Drouin, Inactivation Dates Of The Human And Guinea Pig Vitamin C Genes, Genetic, 139(2) (2010) 199–207.
11
[12] R. L Poole, inventor; Fischer & Porter Co., assignee. Dissolved oxygen probe. United States patent US 3,948,746. 1976 Apr 6.
12
[13] Stack Jr Vernon T, inventor; Weston Roy F Inc, assignee. Dissolved oxygen probe. United States patent US 3,372,103. 1968 Mar 5.
13
[14] M. J. Johnson, J. Borkowski, C. Engblom, Steam sterilizable probes for dissolved oxygen measurement. Biotechnology and Bioengineering, 6(4) (1964) 457-68.
14
[15] Miyake Y, inventor; Hokushin Electric Works, Ltd., assignee. Dissolved oxygen probe. United States patent US 4,259,165. 1981 Mar 31.
15
[16] W. N. Epstein, Analysis of Changes In Molar Relationships By Means Of Extra-Oral Anchorage (Head-Cap) In Treatment Of Malocclusion1, The Angle Orthodontist, 18(3) (1948) 63-9.
16
[17] A. P. Black, A. M. Buswell, F. A. Eidsness, A. L. Black, Review of the jar test, American Water Works Association Journal, 49(11) (1957) 1414-24.
17
[18] N. Shah Hoseyni, M. Sarafin, General Chemistry Practical Training, Tehran, Tehran University Press, 1995. (In Persian). Same manner. Article title. J. Fundam. Appl. Sci., 2016.
18
[19] A. G. Hashimoto, Methane from cattle waste: effects of temperature, hydraulic retention time, and influent substrate concentration on kinetic parameter (K), Biotechnology and Bioengineering, 24(9) (1982) 2039-52.
19
[20] A. K. Misra, P. Chandra, J. B. Shukla, Mathematical modeling and analysis of the depletion of dissolved oxygen in water bodies, Nonlinear analysis: real world applications, 7(5) (2006) 980-96.
20
[21] B. B. Blizanac, P. N. Ross, N. M. Markovic, Oxygen electroreduction on Ag (111): the pH effect, Electrochimica Acta, 52(6) (2007) 2264-71.
21
[22] R. Ketrane, B. Saidani, O. Gil, L. Leleyter, F. Baraud, Efficiency of five scale inhibitors on calcium carbonate precipitation from hard water: effect of temperature and concentration, Desalination,; 249(3) (2009) 1397-404.
22
ORIGINAL_ARTICLE
مقایسه ضرایب عملکرد لرزهای مورد نیاز در سیستم قاب خمشی ویژه فولادی تحت تأثیر زلزلههای حوزه دور با حوزه نزدیک
تفاوت رفتار سیستمهای مختلف سازه ای تحت زمین لرزه های ثبت شده در حوزه نزدیک، بررسی و بازنگری ضرایب طراحی لرزه ای این سیستمها را اجتناب ناپذیر نموده است. این مطالعه به ارزیابی «ضرایب عملکرد لرزهای» قاب خمشی ویژه فولادی تحت زلزله های حوزه نزدیک می پردازد. در این راستا «مدلهای نمونهای» سه دهانه شامل سازه های 1،2،3،5،8 و 15طبقه با دهانههای 4 و 8متر برای منطقهای با لرزهخیزی خیلی زیاد طراحی و مدل می گردند. ابتدا با انجام آنالیزهای استاتیکی افزایشی ضرایب «اضافه مقاومت» و «شکلپذیری مبتنی بر پریود» تعیین شده و سپس با انجام آنالیزهای دینامیکی غیرخطی افزایشی تحت تاثیر زلزله های حوزه دور، حوزه نزدیک بدون پالس و حوزه نزدیک باپالس، وضعیت عملکردی مدلها مشخص و صحت ضریب رفتار ارزیابی می گردد. نتایج نشان میدهند که به جز سازههای 15طبقه، «ضریب رفتار» و «ضریب اضافه مقاومت» سیستم، تحت تاثیر زلزلههای حوزه دور مناسب می باشند ولی بهرهگیری از همین ضرایب برای سازههای کوتاهپریود تحت زلزلههای حوزه نزدیک باپالس مناسب نبوده و برای نیل به اهداف عملکرد لرزه ای، بازنگری آن ضروری می باشد.
https://ceej.aut.ac.ir/article_687_c471aebfb370bce4d0cc6db8a72e92b4.pdf
2018-04-21
37
52
10.22060/ceej.2016.687
ضرایب عملکرد لرزه ای
زلزله حوزه نزدیک
قاب خمشی ویژه فولادی
آنالیز دینامیکی افزایشی
آنالیز استاتیکی افزایشی
کاوه
موسوی درزیکلائی
kavehmd2000@gmail.com
1
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر، تهران، ایران
AUTHOR
تورج
تقی خانی
ttaghikhany@aut.ac.ir
2
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر، تهران، ایران
LEAD_AUTHOR
[1] S. Li, L.-l. Xie, Progress and trend on near-field problems in civil engineering, ACTA Seismologica Sinica, 20(1) (2007) 105-114.
1
[2] J.P. Stewart, S.-J. Chiou, J.D. Bray, R.W. Graves, P.G. Somerville, N.A. Abrahamson, Ground motion evaluation procedures for performance-based design, Pacific Earthquake Engineering Research Center (PEER), 2001.
2
[3] P.G. Somerville, Development of an improved representation of near-fault ground motions, in: SMIP98 Proceedings, Seminar on Utilization of Strong-Motion Data, California Division of Mines and Geology, Sacramento, CA, 1998, pp. 1-20.
3
[4] B. Alavi, H. Krawinkler, Consideration of Near-Fault Ground Motion Effects in Seismic Design, in: 12WCEE, Auckland, New Zeland, 2000, pp. 2665.
4
[5] B. Alavi, H. Krawinkler, Effects of near-fault ground motions on frame structures, Department of Civil and Environmental Engineering, Stanford University, CA, USA, 2001.
5
[6] S.Y. Yun, O. Ronald, C. Hamburger, A. Cornell, D.A. Foutch., Seismic Performance Evaluation for Steel Moment Frames, Journal of Structural Engineering, (2002) 534-545.
6
[7] S. Krishnan, C. JI, D. Komatitsch, J. Tromp, Performance of two 18-story steel moment frame buildings in southern California during two large simulated San Andreas earthquakes, Earthquake Spectra, 22(4) (2006) 1035–1061.
7
[8] E. Kalkan, S.K. Kunnath, Effects of fling step and forward directivity on seismic response of buildings, Earthquake Spectra, 22(2) (2006) 367-390.
8
[9] C.A. Maniatakis, I.M. Taflampas, C.C. Spyrakos, Identification of Near-fault Earthquake Record Characteristics, in: The 14th World Conference on Earthquake Engineering, Beijing, China, 2008.
9
[10] F. Zareian, D. Lignos, H. Krawinkler, Evaluation of seismic collapse performance of steel special moment resisting frames using FEMA P695 (ATC-63) methodology, in: Proceedings of the 2010 Structures Congress, ASCE, 2010.
10
[11] F. Zareian, D. Lignos, H. Krawinkler, Seismic design modification factors for steel special moment-resisting frames, in: International Workshop on Protection of Build Environment against Earthquakes, Ljubljana, Slovenia, 2010.
11
[12] S. Krishnan, M. Muto, Sensitivity of the Earthquake Response of Tall Steel Moment Frame Buildings to Ground Motion Features, Journal of Earthquake Engineering, 17(5) (2013) 673-698.
12
[13] A. Mathiasson, R.A. Medina, Seismic Collapse Assessment of a 20-Story Steel Moment-Resisting Frame Structure, Buildings, 4 (2014) 806-822.
13
[14] Applied Technology Council, FEMA P695: Quantification of building seismic performance factors, Federal Emergency Management Agency (FEMA), Washington D.C., 2009.
14
[15] Ministry of Housing and Urban Development, Iranian national building code part 10: Design and Construction of Steel structures, Iran, 2009. [In Persian]
15
[16] Building and Housing Research Center, Iranian Code of practice for seismic resistant design of buildings, Iran, 2005. [In Persian]
16
[17] D. Lignos, Sidesway collapse of deteriorating structural systems under seismic excitations, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA, USA, 2008.
17
[18] OpenSees, Open System for Earthquake Engineering Simulation, in, Pacific Earthquake Engineering Research Center (PEER), 2007.
18
[19] A. Gupta, H. Krawinkler, Seismic Demands for Performance Evaluation of Steel Moment Resisting Frame Structures, Department of Civil Engineering, Stanford University, Stanford, CA, 1999.
19
[20] H. Krawinkler, V. Bertero, E. Popov, Inelastic Behavior of Steel Beam-to-column Sub-assemblages, Earthquake Engineering Research Center (EERC), University of California at Berkeley, CA, 1971.
20
[21] D. Vamvatsikos, M. Eeri, Cornell C. A., Applied Incremental Dynamic Analysis, in: 12th European Conference on Earthquake Engineering, London, UK, 2002.
21
[22] J.W. Baker, Quantitative Classification of Near-Fault Ground Motions Using Wavelet Analysis, Bulletin of the Seismological Society of America, 97(5) (2007) 1486-1501.
22
ORIGINAL_ARTICLE
تحلیل ارتعاشات عرضی پل های قوسی خرپایی پیچیده با استفاده از اعضای پیوسته
چکیده: مدل سازی و تحلیل پل های خرپایی قوسی به دلیل تعدد اعضا معمولاً بسیار زمان بر می باشد. در این مقاله به منظور کاهش زمان تحلیل و سهولت در مدل سازی، پل های خرپایی پیچیده با اعضای پیوسته تیری شبیه سازی شده اند. در واقع پیکره سه بعدی قوس خرپایی براساس معادلات حاکم بر رفتار خارج صفحه یک عضو تیر قوسی مدل سازی می شود. برای این منظور با استفاده از روش مانده های موزون، فرمول بندی اجزای محدود ترکیبی (سختی-نرمی) جدیدی ارائه شده است. جهت راستی آزمایی روش ارائه شده، ارتعاشات عرضی سه پل قوسی خرپایی تحت تاثیر یک شتاب نگاشت خاص مورد بررسی قرار گرفته است. مقایسه این نتایج، با نتایج حاصل از تحلیل دقیق تر توسط نرم افزارSAP2000 حاکی از آن است که روش تقریبی ارائه شده از دقت مناسبی در برآورد پاسخ شتاب و جابجایی برخوردار است. به علاوه، در روش ارائه شده تعداد اعضای بسیار کمتری جهت مدلسازی پل قوسی خرپایی استفاده شده که می تواند باعث تسهیل در طراحی اولیه پل گردد.
https://ceej.aut.ac.ir/article_1010_202812d62a6250751db9f8b9b55697e9.pdf
2018-04-21
53
60
10.22060/ceej.2017.10876.4943
تحلیل لرزه ای
تحلیل ساده شده
پل های قوسی خرپایی
مدل های پیوسته
اجزای محدود ترکیبی
افشین
مصلحی تبار
amoslehi@tafreshu.ac.ir
1
دانشکده عمران، دانشگاه تفرش، مرکزی، ایران
LEAD_AUTHOR
حامد
نجفی دهکردی
hnajafi_d@yahoo.com
2
دانشکده عمران، دانشگاه تفرش، مرکزی، ایران
AUTHOR
[1] I.E. Harik, D.L. Allen, Seismic Evaluation of Brent-Spence Bridge. J. Struct. Eng., 123(9) (1997) 1269-1275.
1
[2] A.A. Shama, J.B. Mander, S.S. Chen, A.J. Aref, Ambient Vibration and Seismic Evaluation of A Cantilever Truss Bridge. Eng. Struct., 23(10) (2001) 1281-1292.
2
[3] M.A.M. Torkamani, H.E. Lee, Dynamic Behavior of Steel Deck Tension-Tied Arch Bridges to Seismic Excitation. J. Bridge Eng., 7(1) (2002) 57–67.
3
[4] A.S. Nazmy, Seismic Response of Arch Bridges. Proceedings of the Institution of Civil Engineers, Bridge Eng., 156(2) (2003) 91–97.
4
[5] T. Usami, Z. Lu, H. Ge, T. Kono, Seismic Performance Evaluation of Steel Arch Bridges Against Major Earthquakes, Part 1: Dynamic Analysis Approach. Earthquake Eng. Struct. Dyn., 33(14) (2004) 1337–1354.
5
[6] O.T. Cetinkaya, S. Nakamura, K. Takahashi, A Static Analysis-Based Method for Estimating the Maximum Out-of-Plane Inelastic Seismic Response of Steel Arch Bridges. Eng. Struct., 28(5) (2006) 635–647.
6
[7] R. Davis, R.D. Henshell, G.B. Warburton, Curved Beam Finite Elements for Coupled Bending and Torsional Vibration. Earthquake Eng. Struct. Dyn., 1(2) (1972) 165-175.
7
[8] C.H. Yoo, J.P. Fehrenbach, Natural Frequencies of Curved Girders. J. Eng. Mech.,107(2) (1981) 339–354.
8
[9] Y.J. Kang, C.H. Yoo, Thin-Walled Curved Beams, I: Formulation of Nonlinear Equations. J. Eng. Mech., 120(10) (1994) 2072-2101.
9
[10] K.Y. Yoon, N.H. Park, Y.J. Choi, Y.J. Kang, Natural Frequencies of Thin-Walled Curved Beams. Finite Elem. Anal. Des., 42(13) (2006) 1176-1186.
10
[11] B.Y. Kim, C.B. Kim, S.G. Song, H.G. Beom, C. Cho, A Finite Thin Circular Beam Element for Out-of-Plane Vibration Analysis of Curved Beams. J. Mech. Sci Technol., 23(5) (2009) 1396-1405.
11
[12] H. Najafi, Simplified Dynamic Analysis of Complicated Truss Bridges Using Continuum Elements. M.Sc. Thesis, Tafresh University, Tafresh (In Persian).
12
[13] T.W. Rong, C.T. Ju, Out-of-Plan Vibration of A Multi-Span Timoshenko Curved Beam Due to A Moving Load Including the Warping Inertia of Beam. Struct. Eng. Mech., 7(4) (1999) 361-375.
13
[14] A.K. Chopra, Dynamics of structures. 2nd ed. Prentice Hall, (2001).
14
[15] K.J. Bathe, Finite Element Procedures in Engineering Analysis. Prentice Hall, (1982).
15
ORIGINAL_ARTICLE
تعیین بار کمانش جانبی-پیچشی تیرهای جدار نازک الاستیک دو سر مفصل با مقطع نامتقارن با استفاده از روش اختلاف محدود
تیرهای جدار نازک المان بسیار مهمی در سازههای فولادی هستند. در این اعضا، با توجه به نحوه بارگذاری جانبی و همچنین بر اساس تقارن و یا عدم تقارن سطح مقطع عضو، امکان وقوع کمانش جانبی-پیچشی وجود دارد. لذا در این پژوهش به بررسی پایداری تیرهای جدار نازک با نیمرخ نامتقارن در برابر کمانش جانبی-پیچشی پرداخته شده است. بدین منظور، در اولین گام در تحلیل پایداری جانبی تیرها، با استفاده از روابط حاکم بر تغییر شکل اعضای جدار نازک و اصل پایستگی انرژی پتانسیل، معادلات دیفرانسیل تعادل تیر با سطح مقطع نامتقارن تحت بارگذاری جانبی تعیین میگردد. معادلات پایداری جانبی بدست آمده در حضور پارامترهای لنگر خمشی، نامتقارنی سطح مقطع و زاویه پیچش، یک دستگاه معادلات دیفرانسیل وابسته است. سپس با استفاده از شرایط مرزی حاکم بر خمش، معادله تعادل پیچش مستقل گشته و معادله دیفرانسیل مرتبه چهار با ضرایب متغیر حاصل شده تنها وابسته به پارامتر تغییر شکل پیچشی عضو جدار نازک خواهد بود. در ادامه، با استفاده از روش عددی تقریبی اختلاف محدود مرکزی و فرضیات حاکم بر این روش معادله دیفرانسیل مرتبه چهار بدست آمده حل میگردد و در نهایت، با توجه به شرایط مرزی حاکم بر تیرهای دو سر مفصل و با استفاده از روش حل مقادیر ویژه مقدار بار بحرانی کمانش محاسبه میشود. نتایج بدست آمده از روش معرفی شده با مقادیر ارائه شده توسط محققان دیگر و مقادیر حاصله از نرم افزار Ansys مقایسه گشتهاند.
https://ceej.aut.ac.ir/article_897_d0bd321ab227a884771dce22b53bbd5e.pdf
2018-04-21
61
72
10.22060/ceej.2017.11194.4986
تیرهای جدار نازک
بار کمانش جانبی-پیچشی
نیمرخ نامتقارن
تیر دوسر مفصل
روش اختلاف محدود
معصومه
سلطانی
msoltani@kashanu.ac.ir
1
گروه مهندسی عمران، دانشگاه کاشان، کاشان، ایران
LEAD_AUTHOR
بهروز
عسگریان
asgarian@kntu.ac.ir
2
دانشکده مهندسی عمران دانشگاه صنعتی خواجه نصیرالدین طوسی، تهران، ایران
AUTHOR
[1] S.P. Timoshenko, J.M Gere, Theory of elastic stability. 2nd ed. New York: McGraw-Hill, 1961.
1
[2] V.Z. Vlasov, Thin-walled elastic beams, Moscow, 1959. French translation, Pièces longues en voiles minces, Eyrolles, Paris, 1962.
2
[3] W.F. Chen, E.M. Lui, Structural stability, theory and implementation, Elsevier, 1987.
3
[4] Z.P. Bazant, L. Cedolin L, Stability of structures Elastic, inelastic fracture and damage theories, Dover Publications, 1991.
4
[5] L. Zhang, G.S. Tong, Flexural–torsional buckling of thin-walled beam members based on shell buckling theory, Thin-Walled Structures, 42 (2004) 1665-1687.
5
[6] A. Sapkas, L.P. Kollar, Lateral-torsional buckling of composite beams, International Journal of Solids and Structures, 39(11) (2002) 2939-2963.
6
[7] F. Mohri, A. Brouki, J.C. Roth, Theoretical and numerical stability analyses of unrestrained, mono-symmetric thin-walled beams, Journal of Constructional Steel Research, 59 (2003) 63-90.
7
[8] L. Jun, L. Wanyou, S. Rongying, H. Hongxing, Coupled bending and torsional vibration of non-symmetrical axially loaded thin-walled Bernoulli–Euler beam, Mechanics Research Communications, 31 (2004) 697–711.
8
[9] A. Andrade, D. Camotim, P. Providencia, On the evaluation of elastic critical moments in doubly and singly symmetric I-section cantilevers, Journal of Constructional Steel Research, 67 (2007) 894-908.
9
[10] R.E. Erkmen, M. Mohareb, Buckling analysis of thin-walled open members- A complementary energy variational principle, Thin-Walled Structures, 46 (2008) 602–617.
10
[11] R.E. Erkmen, M. Mohareb, Buckling analysis of thin-walled open members- A finite element formulation, Thin-Walled Structures, 46 (2008) 618–636.
11
[12] A.Y.T. Leung, Exact dynamic stiffness for axial-torsional buckling of structural frames, Thin-Walled Structures, 46 (2008) 1–10.
12
[13] C.W. Kurniawan, M. Mahendran, Elastic lateral buckling of simply supported LiteSteel beams subject to transverse loading, Thin-Walled Structures, 47 (2009) 109-119.
13
[14] M.M. Attard, M.Y. Kim, Lateral buckling of beams with shear deformations– A hyperelastic formulation, International Journal of Solids and Structures, 47 (2010) 2825-2840.
14
[15] L. Wu, M. Mohareb M, Buckling of shear deformable thin-walled members—I. Variational principle and analytical solutions, Thin-Walled Structures, 49 (2011) 197–207.
15
[16] L. Wu, Mohareb M, Buckling formulation for shear deformable thin-walled members—II Finite element formulation, Thin-Walled Structures, 49 (2011) 208–222.
16
[17] F. Borbon, A. Mirasso, D. Ambrosini, Beam element for coupled torsional-flexural vibration of doubly unsymmetrical thin walled beams axially loaded, Computers and Structures, 89 (2011) 1406-1416.
17
[18] J. Kuś, Lateral-torsional buckling steel beams with simultaneously tapered flanges and web, Steel and Composite Structures, 19(4) (2015) 897-916.
18
[19] P. Ruta, J. Szybinski, Lateral stability of bending non-prismatic thin-walled beams using orthogonal series, Procedia Engineering, 11 (2015) 694-701.
19
[20] F. Mohri, S.A. Meftah, N. Damil, A large torsion beam finite element model for tapered thin-walled open cross-sections beams, Engineering Structures, 99 (2015) 132-148.
20
[21] F. Mohri, N. Damil, M. Potier-Ferry, Large torsion finite element model for thin-walled beams, Computers and Structures, 86 (2008) 671–683.
21
[22] M.J. Iromenger, Finite difference buckling analysis of non-uniform columns, Computers and Structures, 12(5) (1980) 741-748.
22
[23] T. Asakura, T. Ishizuka, T. Miyajima, M. Toyoda, Finite-difference time-domain analysis of the vibration characteristics of a beam-plate structure using a dimension-reduced model, Applied Acoustics, 292 (2015) 76-82.
23
[24] B. Indraratna, N.N. Trung, C. Rujikiatkamjorn, S. Soltan, Coupled discrete element–finite difference method for analyzing the load-deformation behavior of a single stone column in soft soil, Computers and Geotechnics, 63 (2015) 267-278.
24
[25] K.S. Virdi, Finite difference method for nonlinear analysis of structures, Journal of Constructional Steel Research, 62 (2006) 1210-1218.
25
[26] S.A. Al-Khaabi, G. Aksu, Free vibration analysis of mindlin plates with parabolically varying thickness, Computers and Structures, 34(3) (1990) 395-399.
26
[27] J.P. Singh, S.S. Dey, Variationa of finite difference approach to buckling of plates of variable stiffness. Computers and Structures 1990; 36(1): 39-45.
27
[28] B. Suryoatmono, D. Ho, The moment–gradient factor in lateral–torsional buckling on wide flange steel sections, Journal of Constructional Steel Research, 58 (2002) 1247–1264.
28
[29] J.T. Mottram, Lateral-torsional buckling of thin-walled composite I- beams by the finite difference method, Composites Engineering, 2(2) (1992) 91-104.
29
[30] B. Asgarian, M. Soltani, F. Mohri, Lateral-torsional buckling of tapered thin-walled beams with arbitrary cross-sections, Thin-Walled Structures, 62 (2013) 96–108.
30
[31] F. Mohri, N. Damil, M. Potier-Ferry, Linear and non-linear stability analyses of thin-walled beams with mono symmetric I sections, Thin-Walled Structures, 48 (2010) 299–315.
31
[32] M. Soltani, B. Asgarian, F. Mohri, Elastic instability and free vibration analyses of tapered thin-walled beams by power series method, Journal of constructional steel research, 96 (2014) 106-126.
32
[33] M. Soltani, B. Asgarian, F. Mohri, Finite element method for stability and free vibration analyses of non-prismatic thin-walled beams, Thin-Walled Structures, 82 (2014) 245-261.
33
[34] MATLAB Version7.6, MathWorks Inc, USA, 2008.
34
[35] ANSYS, Version 5.4, Swanson Analysis System, Inc, 2007.
35
ORIGINAL_ARTICLE
تحلیل بارافزون پل بتن مسلح تحت اثر خوردگی ناشی از نفوذ یون کلراید
یکی از عوامل مؤثر در تخمین عمر سرویسدهی پلهای بتن مسلح تعیین عملکرد لرزهای درازمدت این سازهها است. خوردگی ناشی از نفوذ یون کلراید منجر به اضمحلال اعضای بحرانی پل بتن مسلح در طول عمر مفید سازه شده و در نتیجه عملکرد لرزهای درازمدت پل را تحت زوال قرار میدهد. در مناطق جنوبی کشور ایران با توجه به لرزهخیزی منطقه و شدت بالای خوردگی اعضای بتنمسلح ناشی از شرایط محیطی، بررسی اثر زوال ناشی از خوردگی بر عملکرد لرزهای درازمدت پلهای موجود در این نواحی اهمیت زیادی خواهد داشت. به منظور بررسی این مسئله ابتدا زمان شروع خوردگی در ستونها به عنوان اعضای بحرانی لرزهای پل تعیین شده و بر اساس آن تأثیر خوردگی بر روی مشخصات پایه بتنمسلح در نقاط زمانی مشخص در عمر مفید پل محاسبه شده است. تأثیر خوردگی شامل زوال خصوصیات بتن هسته و پوشش، میلگرد فولادی و پیوستگی بین بتن و میلگرد فولادی است. در مرحله بعد در هر نقطه زمانی، تحلیل لنگر - انحناء ستون پایه پل انجام شده و مشخصات مفصل پلاستیک تعیین شده است. در نهایت تحلیل بارافزون پل در هر دو راستای طولی و عرضی پل انجام شده و منحنیهای ظرفیت پل بتنمسلح در نقاط زمانی ذکر شده مقایسه شده است. نتایج به دست آمده نشاندهنده زوال ظرفیت پل مربوطه در طول زمان ناشی از خوردگی میباشد. بر اساس مقادیر به دستآمده، پیشنهادی برای افزایش مقدار برش پایه طراحی به منظور حصول اطمینان از عملکرد لرزهای درازمدت پلهای بتن مسلح در محیطهای خورنده داده شده است.
https://ceej.aut.ac.ir/article_863_72d0d43af5e570a9ee19cf5609f8c173.pdf
2018-04-21
73
88
10.22060/ceej.2016.863
پل بتن مسلح
خوردگی کلراید
عملکرد لرزه ای
مفصل پلاستیک
تحلیل بارافزون
محمد رضا
سیفی اسگ شهر
m_seify@aut.ac.ir
1
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر، تهران، ایران
AUTHOR
علی رضا
رهایی
2
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر، تهران، ایران
LEAD_AUTHOR
[1] C. Q., Li, J. J., Zheng, Propagation of reinforcement corrosion in concrete and its effects on structural deterioration, Magazine of Concrete Research, 57(5) (2005) 261-71.
1
[2] X., Shi, N., Xie, K., Fortune, J., Gong, Durability of steel reinforced concrete in chloride environments: An overview, Construction and Building Materials, 30 (2012) 125-138.
2
[3] F. J., Molina, C., Alonso, C., Andrade, Cover cracking as a function of rebar corrosion: part 2-numerical model, Materials and structures, 26(9) (1993) 532-548.
3
[4] D., Coronelli, P., Gambarova, Structural assessment of corroded reinforced concrete beams: modeling guidelines, Journal of Structural Engineering, 130(8) (2004) 1214-1224.
4
[5] M. P., Enright, D. M., Frangopol, Service-life prediction of deteriorating concrete bridges, Journal of Structural engineering, 124(3) (1998) 309-317.
5
[6] H. S., Lee, Y. S., Cho, Evaluation of the mechanical properties of steel reinforcement embedded in concrete specimen as a function of the degree of reinforcement corrosion, International journal of fracture, 157(1-2) (2009) 81-88.
6
[7] A., Castel, I., Khan, R. I., Gilbert, Development length in reinforced concrete structures exposed to steel corrosion: A correction factor for AS3600 provisions, Australian Journal of Structural Engineering, 16(2) (2015) 89-97.
7
[8] K., Bhargava, A. K., Ghosh, Y., Mori, S., Ramanujam, Suggested empirical models for corrosion-induced bond degradation in reinforced concrete, Journal of structural engineering, 134(2) (2008) 221-230.
8
[9] K. A., Vu, M. G., Stewart, Structural reliability of concrete bridges including improved chloride-induced corrosion models, Structural safety, 22(4) (2000) 313-333.
9
[10] T., Guo, R., Sause, D. M., Frangopol, A., Li, Time-dependent reliability of PSC box-girder bridge considering creep, shrinkage, and corrosion, Journal of Bridge Engineering, 16(1) (2010) 29-43.
10
[11] C. K., Chiu, T., Noguchi, M., Kanematsu, Optimal maintenance plan for RC members by minimizing life-cycle cost including deterioration risk due to carbonation, Journal of advanced concrete technology, 6(3) (2008) 469-480.
11
[12] E., Martinelli, E., Erduran, Seismic Capacity Design of RC frames and environment-induced degradation of materials: Any concern?, Engineering Structures, 52 (2013) 466-477.
12
[13] L., Berto, R., Vitaliani, A., Saetta, P., Simioni, Seismic assessment of existing RC structures affected by degradation phenomena, Structural Safety, 31(4) (2009) 284-297.
13
[14] H., Yalciner, S., Sensoy, O., Eren, Time-dependent seismic performance assessment of a single-degree-of-freedom frame subject to corrosion, Engineering Failure Analysis, 19 (2012) 109-122.
14
[15] R., Kumar, P., Gardoni, M., Sanchez-Silva, Effect of cumulative seismic damage and corrosion on the life-cycle cost of reinforced concrete bridges, Earthquake Engineering & Structural Dynamics, 38(7) (2009) 887-905.
15
[16] J., Zhong, Seismic fragility estimates for corroded reinforced concrete bridge structures with two-column bents, PhD Thesis, Texas A&M University, Texas, (2008).
16
[17] J., A., Harvat, Effect of corrosion on the seismic response of a single-bent, reinforced concrete bridge”. PhD Thesis, Texas A&M University, Texas, (2009).
17
[18] J., Ghosh, J. E., Padgett, Aging considerations in the development of time-dependent seismic fragility curves, Journal of Structural Engineering, 136(12) (2010)1497-1511.
18
[19] F., Biondini, M., Vergani, Damage modeling and nonlinear analysis of concrete bridges under corrosion, In Sixth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2012), Stresa, Italy, (2012) 8-12.
19
[20] Y. C., Ou, H. D., Fan, N. D., Nguyen, Long-term seismic performance of reinforced concrete bridges under steel reinforcement corrosion due to chloride attack, Earthquake Engineering & Structural Dynamics, 42(14) (2013) 2113-2127.
20
[21] M., Shekarchi, F., Moradi, Concrete durability issues in the Persian Gulf, InCBM-CI International Workshop, 200 (2007) 357-370.
21
[22] H. R., Ashrafi, A. A., Ramezanianpour, Model Presentation for the Chloride Diffusion in Silica Fume Concretes Based on the Experimental Results, PhD Thesis, Amirkabir University of Technology, Tehran, 2007. [In Persian]
22
[23] D. E., Choe, P., Gardoni, D., Rosowsky, T., Haukaas, Seismic fragility estimates for reinforced concrete bridges subject to corrosion, Structural Safety, 31(4) (2009) 275-283.
23
[24] T. T., Hsu, Unified theory of reinforced concrete, CRC press, Dec, (1992).
24
[25] J. B., Mander, Seismic design of bridge piers, PhD Thesis, University of Canterbury, Christchurch, N.Z, (1983).
25
[26] J. B., Mander, M. J., Priestley, R., Park, Theoretical stress-strain model for confined concrete, Journal of structural engineering, 114(8) (1988) 1804-1826.
26
[27] CSI., SAP2000- Linear and Nonlinear Static and Dynamic Analysis and Design of Three-Dimensional Structures: Basic Analysis Reference Manual. Computers and Structures, Inc, Berekeley, California, (2005).
27
[28] A., Aviram, K. R., Mackie, B., Stojadinović, Guidelines for nonlinear analysis of bridge structures in California. Pacific Earthquake Engineering Research Center, Berekeley, California, (2008).
28
[29] Caltrans., Caltrans Seismic Design Criteria Version 1.6. California Department of Transportation, Sacremento, California, (2010).
29
[30] XTRACT., Cross Section Analysis Program for Structural Engineers, IMBSEN & Associate Inc., USA, (2007).
30
ORIGINAL_ARTICLE
بررسی اثر تنش های چسبنده لبه ترک بر رفتار بار - تغییر شکل تیرهای بتن مسلح
در سه دهه اخیر پیشرفتهای بسیار زیادی در زمینه تحلیل غیرخطی سازههای بتن مسلح به کمک روش عناصر محدود صورت گرفته است، اما هنوز پیشبینی دقیق در خصوص پاسخ تیرهای بتن مسلح در شرایط مختلف هندسه و بارگذاری، به کمک روش عناصر محدود، نیاز به تحقیقات بیشتری دارد. محققان نشان دادهاند برای شبیهسازی پاسخ غیر الاستیک بتن در منطقه صدمهدیده نزدیک نوک ترک میتوان از یک توزیع تنش چسبنده روی لبههای ترک که مایل به بستن ترک است، استفاده نمود. هدف این مقاله، بررسی عددی تأثیر تنشهای چسبنده ترک بر رفتار بار-تغییر مکان تیرهای بتن مسلح با استفاده از مدل آسیب ـ پلاستیک و مکانیک شکست بتن است. در تحلیل عددی بهکار رفته، رفتار غیرخطی بتن در ناحیه فشاری با استفاده از نظریه آسیب ـ پلاستیک مدلسازی شده است. برای شبیهسازی رفتار غیرخطی بتن در ناحیه کششی و مسئله ترکخوردگی و گسترش ترک، از مکانیک شکست غیر خطی مبتنی بر مدل ترک چسبنده استفاده شده است. در این راستا، با استفاده از نرمافزار عناصر محدود آباکوس یک سری تیرهای بتن مسلح آزمایشگاهی موجود، شبیهسازی شدهاند. با توجه به محدودیتهای نرمافزار آباکوس در این خصوص، یک روش گام به گام مورد استفاده قرار گرفته است. در روش ارائه شده امکان گسترش چندین ترک چسبنده در تیر در نظر گرفته شده است. مقایسه نمودار بار-تغییر مکان تیرهای بتن مسلح بهدستآمده از تحلیل عددی و نتایج آزمایشگاهی هماهنگی قابل قبولی را نشان میدهد.
https://ceej.aut.ac.ir/article_888_1270779e0d997940cc50f68c692e9e9a.pdf
2018-04-21
89
96
10.22060/ceej.2017.11366.5012
تیر بتن مسلح
روش عناصر محدود
تنش های چسبنده ترک
مکانیک شکست
رفتار بار-تغییر مکان
وحید
بروجردیان
broujerdian@iust.ac.ir
1
دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران، تهران، ایران
LEAD_AUTHOR
ابوالفضل
شرافتی
abolfazl_sherafati@yahoo.com
2
دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران، تهران، ایران
AUTHOR
حسین
کریم پور
karimpour.h@gmail.com
3
دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران، تهران، ایران
AUTHOR
[1] S.W. Hu, Z.X. Mi, J. Lu, A study on the crack propagation process in concrete structures using energy method, in: Applied Mechanics and Materials, Trans Tech Publ, 2012, pp. 3151-3155.
1
[2] M. Kaplan, Crack propagation and the fracture of concrete, in: Journal Proceedings, 1961, pp. 591-610.
2
[3] S.P. Shah, F.J. McGarry, Griffith fracture criterion and concrete, Journal of the Engineering Mechanics Division, 97(6) (1971) 1663-1676.
3
[4] D.S. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, 8(2) (1960) 100-104.
4
[5] A. Hillerborg, M. Modéer, P.-E. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and concrete research, 6(6) (1976) 773-781.
5
[6] Y. Jenq, S.P. Shah, Two parameter fracture model for concrete, Journal of engineering mechanics, 111(10) (1985) 1227-1241.
6
[7] F.J. Vecchio, M.P. Collins, The modified compression-field theory for reinforced concrete elements subjected to shear, ACI J., 83(2) (1986) 219-231.
7
[8] F.J. Vecchio, M.P. Collins, Compression response of cracked reinforced concrete, Journal of Structural Engineering, 119(12) (1993) 3590-3610.
8
[9] T.T. Hsu, L.-X. Zhang, Tension stiffening in reinforced concrete membrane elements, Structural Journal, 93(1) (1996) 108-115.
9
[10] H.-G. Kwak, F.C. Filippou, Finite element analysis of reinforced concrete structures under monotonic loads, Department of Civil Engineering, University of California Berkeley, CA, 1990.
10
[11] V. Broujerdian, M.T. Kazemi, Smeared rotating crack model for reinforced concrete membrane elements, ACI Structural Journal, 107(4) (2010) 411.
11
[12] L. Hsu, C.-T. Hsu, Complete stress—strain behaviour of high-strength concrete under compression, Magazine of Concrete Research, 46(169) (1994) 301-312.
12
[13] B.L. Wahalathantri, D. Thambiratnam, T. Chan, S. Fawzia, A material model for flexural crack simulation in reinforced concrete elements using ABAQUS, in: Proceedings of the first international conference on engineering, designing and developing the built environment for sustainable wellbeing, Queensland University of Technology, 2011, pp. 260-264.
13
[14] B. Code, ACI 318-11 Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Retrieved, 8 (2012).
14
[15] S. Kumar, S.V. Barai, Concrete fracture models and applications, Springer Science & Business Media, 2011.
15
[16] S. Xu, Determination of parameters in the bilinear, Reinhardt’s non-linear and exponentially non-linear softening curves and their physical meanings. Werkstoffe und Werkstoffprüfung im Bauwesen, Hamburg, Libri Bod, 15 (1999) 410-424.
16
[17] H.W. Reinhardt, H.A. Cornelissen, D.A. Hordijk, Tensile tests and failure analysis of concrete, Journal of structural engineering, 112(11) (1986) 2462-2477
17
[18] B. Bresler, A.C. Scordelis, Shear strength of reinforced concrete beams, in: Journal Proceedings, 1963, pp. 51-74.
18
ORIGINAL_ARTICLE
مطالعه رفتار چرخه ای ستون های مشبک با بستهای افقی و مایل و ارائه المان جایگزین
ساخت ستونهای مشبک یکی از روشهایی است که در هنگام نیاز به مقاطع بزرگتر برای حمل نیروهای وارده و عدم وجود پروفیل ساختمانی مناسب از آن استفاده میشود. در این روش دو پروفیل ساختمانی توسط بست های افقی یا مورب به یکدیگر متصل شده و تشکیل یک پروفیل واحد را میدهند. در این مقاله رفتار جانبی ستونهای مشبک با بست افقی و مورب با استفاده از مدل-سازی اجزاء محدود مورد بررسی قرار میگیرد. سپس با بارگذاری در دو حالت یکطرفه و چرخهای، پارامترهای رفتاری غیرخطی ستون شامل سختی جانبی در نواحی ارتجاعی و خمیری، برش تسلیم و سطح منحنیهای هیسترزیس محاسبه میگردد. افزایش بار محوری تا حدود 20 درصد ظرفیت ستون سختی، مقاومت، و ظرفیت جذب انرژی را به میزان قابل ملاحظه کاهش میدهد و پس از آن نرخ افت این پارامترها کاهش مییابد. ستونهای دارای بست مورب به دلیل یکپارچگی بیشتر ناشی از عملکرد خرپایی بستها به خصوص در سربارهای محوری زیاد عملکرد بهتری نسبت به ستون مشبک دارای بست موازی از خود نشان میدهند. با توجه به نتایج بدست آمده از مدلهای غیرخطی اجزاء محدود، یک سوپر المان که توانایی مدل کردن رفتار این نوع ستونها را با عضوی یکپارچه با رفتار مشابه دارا میباشد، معرفی میشود. این سوپر المان که با جایگزین کردن یک المان با تعداد درجات آزادی محدود به جای مدل اجزاء محدود با تعداد المانها و درجات آزادی زیاد بدست میآید، سرعت انجام محاسبات را افزایش داده و قابلیت درنظر گرفتن تغییرشکلهای برشی بستهای افقی و مورب در مدلهای کلی را ایجاد میکند.
https://ceej.aut.ac.ir/article_925_9626cd188e00a281c77a9a13307e9997.pdf
2018-04-21
97
110
10.22060/ceej.2017.11306.5003
ستون مشبک
بست افقی
بست مورب
سوپر المان
اجزاء محدود
مصطفی
بیابان نورد
farhad167@yahoo.com
1
مهندس محاسب، مهندسین مشاور، تهران، ایران
AUTHOR
فرهاد
بهنام فر
farhad@cc.iut.ac.ir
2
دانشکده مهندسی عمران، دانشگاه صنعتی اصفهان، اصفهان، ایران
LEAD_AUTHOR
حسن
زیباسخن
zibasokhan@gmail.com
3
دانشکده مهندسی عمران، دانشگاه صنعتی اصفهان، اصفهان، ایران
AUTHOR
[1] R.A. Williamson, M.N. Margolin, Shear effects in design of guyed towers, Journal of the Structural Division, 92(5) (1996) 213-233.
1
[2] J.L. Fung, C. Glauster, B.G. Johnston, Behavior of Laced and Battened Structural Members, Journal of the Structural Division , 96(7) (1970) 1377-1401.
2
[3] S.E. Svensson, J. Kragerup, Collapse loads of laced columns, Journal of the Structural Division, 109(4) (1982) 1367-1384.
3
[4] A. Gjelsvik, Buckling of built-up columns with or without stay plates, Journal of Engineering Mechanics, 121(10) (1990)1142-1159.
4
[5] M.R. Banan, A. Fouladi, A super - element based on finite element method for latticed columns computational aspect and numerical results, Journal of Advanced Materials in Engineerig (Esteghlal), 22(1) (2003) 57-73 (In Persian).
5
[6] D.R. Sahoo, D.C. Rai, Built-up battened columns under lateral cyclic loading, Thin-Walled Structures, 45(5) (2007) 552-562.
6
[7] B. Hosseini Hashemi, M.A. Jafari, Experimental evaluation of elastic critical load in batten columns, Journal of Constructional Steel Research, 65(1) (2009) 125-131.
7
[8] B. Hosseini Hashemi, M.A. Jafari, Experimental evaluation of cyclic behavior of batten columns, Journal of Constructional Steel Research, 78 (2012) 88-96.
8
[9] K.E. Kalochairetis, C.J. Gantes, Numerical and analytical investigation of collapse loads of laced built-up columns, Computers and Structures, 89(11) (2011) 1166-1176.
9
[10] C.J. Gantes, K.E. Kalochairetis, Axially and transversely loaded Timoshenko and laced built-up columns with arbitrary supports”, Journal of Constructional Steel Research, 77 (2012) 95-106.
10
[11] A. Poursamad Bonab, B. Hosseini Hashemi, Analytical investigation of cyclic behavior of laced built-up columns, Journal of Constructional Steel Research, 73(2012) 128-138.
11
[12] B. Hosseini Hashemi, A. Poursamad Bonab, Experimental investigation of the behavior of laced columns under constant axial load and cyclic lateral load, Engineering Structures, 57 (2013) 536-543.
12
[13] K.E. Kalochairetis, C.J. Gantes, X.A. Lignos, Experimental and numerical investigation of eccentrically loaded laced built-up steel columns, Journal of Constructional Steel Research, 101 (2014) 66-81.
13
[14] S. Tahouni, Steel structures design, Dehkhoda Publications, (1996) (In Persian).
14
[15] INBC, Iranian National Building Code (INBC), Part 10: Steel Structures, Ministry of Housing and Urban Development, Tehran, Iran, 2014 (In Persian).
15
ORIGINAL_ARTICLE
اثر اسید سولفوریک برخصوصیات مکانیکی بتن حاوی خرده لاستیک و پت
در 20 سال اخیر، تمرکز زیادی بر روی قابلیت استفاده از انواع زبالههای شهری در صنعت ساختمان رواج داده شده است و تحقیقات بسیاری در این زمینه صورت گرفته است. که در بسیاری از موارد اضافه نمودن مواد بازیافتی علاوه بر فوایدی که برای حفظ محیط زیست به همراه دارد موجب تاثیرات خوبی بر روی خواص محصولات نهایی شده است. یکی از مواد بازیافتی جدید که در صنعت بتن از آن استفاده می شود پلاستیک میباشد. پلاستیکهای بازیافتی می توانند به عنوان سنگدانه در بتن استفاده شوند و برخی خصوصیات مکانیکی بتن از جمله مقاومت در برابر فرسایش آن را بهبود بخشند. در این تحقیق مطالعات آزمایشگاهی بر روی نمونه های بتنی ساخته شده از پت و لاستیک صورت گرفته و مقاومت بتن در برابر خوردگی اسیدی در بخش سنگدانه بررسی شد. به این صورت که نمونهها در محلول رقیق شدهی اسید(pH≈1) قرار گرفته و در بازه های زمانی 20، 40 و 60 روز تحت آزمایشهای مدول الاستیسیته، کشش غیر مستقیم، مقاومت فشاری، سنجش اختلاف وزن و سرعت امواج فراصوت قرار گرفتند. در پایان نتایج بدست آمده مورد ارزیابی قرار گرفت. برای بدست آمدن میزان فرسایش بتن از معیارهای تغییرات وزن و مقاومت فشاری و سرعت امواج فراصوت استفاده شد. نتایج نشان داد که جایگزینی پت با سنگدانه، تاثیر مثبتی را بر روی مقاومت بتن تحت اثر اسید سولفوریک دارد.
https://ceej.aut.ac.ir/article_890_e025147fc69b9109de33323bd055766b.pdf
2018-04-21
111
120
10.22060/ceej.2017.11573.5036
اسید سولفوریک
فرسایش بتن
تغییرات وزن
مقاومت فشاری
سرعت امواج فراصوت.
علی
شاهینی
alishahini58@gmail.com
1
دانشگاه آزاد اسلامی واحد قائمشهرف مازندران، ایران
AUTHOR
مجتبی
یعقوبی سرسختی
alishahini58@yahoo.com
2
دانشگاه آزاد اسلامی واحد قائمشهرف مازندران، ایران
LEAD_AUTHOR
هومن
جانفشان عراقی
dr.h.janfeshan@gmail.com
3
دانشگاه آزاد اسلامی واحد گرگان، گلستان، ایران
AUTHOR
[1] N. Oikonomou, S. Mavridou, The use of waste tyre rubber in civil engineering works, in: Sustainability of construction materials, Elsevier, 2009, pp. 213-238.
1
[2] A. Gore, Our choice: A plan to solve the climate crisis, Rodale Books, 2009.
2
[3] E. Güneyisi, Fresh properties of self-compacting rubberized concrete incorporated with fly ash, Materials and structures, 43(8) (2010) 1037-1048.
3
[4] R.K. Vieira, R.C. Soares, S.C. Pinheiro, O.A. Paiva, J.O. Eleutério, R.P. Vasconcelos, Completely random experimental design with mixture and process variables for optimization of rubberized concrete, Construction and Building Materials, 24(9) (2010) 1754-1760.
4
[5] E. Ganjian, M. Khorami, A.A. Maghsoudi, Scrap-tyre-rubber replacement for aggregate and filler in concrete, Construction and building materials, 23(5) (2009) 1828-1836.
5
[6] A.R. Khaloo, M. Dehestani, P. Rahmatabadi, Mechanical properties of concrete containing a high volume of tire–rubber particles, Waste Management, 28(12) (2008) 2472-2482.
6
[7] P. Sukontasukkul, C. Chaikaew, Properties of concrete pedestrian block mixed with crumb rubber, Construction and Building Materials, 20(7) (2006) 450-457.
7
[8] E. Rahmani, M. Dehestani, M. Beygi, H. Allahyari, I. Nikbin, On the mechanical properties of concrete containing waste PET particles, Construction and Building Materials, 47 (2013) 1302-1308.
8
[9] M. Frigione, Recycling of PET bottles as fine aggregate in concrete, Waste management, 30(6) (2010) 1101-1106.
9
[10] K.G. Babu, D.S. Babu, Performance of fly ash concretes containing lightweight EPS aggregates, Cement and concrete composites, 26(6) (2004) 605-611.
10
[11] T. Ochi, S. Okubo, K. Fukui, Development of recycled PET fiber and its application as concrete-reinforcing fiber, Cement and Concrete Composites, 29(6) (2007) 448-455.
11
[12] B.-W. Jo, G.-H. Tae, C.-H. Kim, Uniaxial creep behavior and prediction of recycled-PET polymer concrete, Construction and Building Materials, 21(7) (2007) 1552-1559.
12
[13] ASTM C33 / C33M, ASTM C33 / C33M – 16e1 Standard Specification for Concrete Aggregates, See also URL http://www.astm.org/cgi-bin/resolver.cgi?C33C33M-16e1
13
ORIGINAL_ARTICLE
بررسی عملکرد بتن توانمند حاوی پوزولان در برابر حمله سولفوریک اسید
بتن به عنوان پرمصرف ترین مصالح ساختمانی، ماهیتی قلیایی و آسیب پذیر در برابر حمله مواد شیمیایی اسیدی دارد. از این رو بررسی عوامل تأثیر گذار بر حمله انواع اسیدها به بتن های با شرایط ساختاری متفاوت، از اهمیت بسزایی برخوردار است. لذا در این تحقیق بتن هایی با دو نسبت آب به مواد سیمانی برابر با 0/32 (تحت عنوان بتن های توانمند) و 0/4 (تحت عنوان بتن های معمولی) توسط سیمان پرتلند و با جایگزینی سرباره کوره آهن گدازی و پوزولان طبیعی تهیه شده و عملکرد این بتن ها در محیط حاوی سولفوریک اسید با pH برابر با 1 مقایسه شده است. در این راستا آزمایش های مقاومت فشاری،اندازه گیری سرعت امواج التراسونیک، مقاومت الکتریکی سطحی و جذب آب موئینه جهت ارزیابی کیفیت بتن از لحاظ مشخصات مکانیکی و نفوذپذیری و آزمایش های کاهش وزن، افت مقاومت فشاری، تغییر طول نمونه های ملات و تغییر سرعت امواج اولتراسونیک به منظور بررسی عملکرد نمونه های بتنی در برابر حمله سولفوریک اسید در نظر گرفته شده اند. نتایج کلی حاکی از بهبود عملکرد بتن های حاوی مواد جایگزین سیمان با افزایش مقدار جایگزینی این مواد به جای سیمان می باشد. همچنین، بتن های توانمند علی رغم نفوذپذیری کمتر، در برابر حمله سولفوریک اسید آسیب پذیرتر از بتن های معمولی هستند. ضمناً روش اندازه گیری تغییرات سرعت امواج التراسونیک جهت ارزیابی خرابی ناشی از حمله سولفوریک اسید نیز همراه با خطای زیاد بوده و استفاده از این آزمایش برای بررسی شدت خوردگی نمونه های بتنی توصیه نمی شود.
https://ceej.aut.ac.ir/article_696_8dcb7275d4e099216032a5f389572ac0.pdf
2018-04-21
121
138
10.22060/ceej.2016.696
بتن توانمند
حمله سولفوریک اسید
دوام بتن
نفوذپذیری بتن
مواد جایگزین سیمان
علی اکبر
رمضانیان پور
aaramce@aut.ac.ir
1
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر، تهران، ایران
LEAD_AUTHOR
آرش
ذوالفقارنسب
arashzolfaghar@aut.ac.ir
2
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر، تهران، ایران
AUTHOR
فرناز
بهمن زاده
farnaz1991@aut.ac.ir
3
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر، تهران، ایران
AUTHOR
امیرمحمد
رمضانیان پور
ramezanian@ut.ac.ir
4
دانشکده مهندسی عمران، دانشگاه تهران، تهران، ایران
AUTHOR
[1] P.C. Aïtcin, High performance concrete. CRC Press. (2011).
1
[2] SHRP-C/FR-91-103, High performance concretes, a state of the art report. Strategic Highway Research Program, National Research Council, Washington, DC, 1991.
2
[3] FIP/CEB, High strength concrete, state of the art report. Bulletin d'Information No. 197 (1990).
3
[4] M. Peterson, High-performance and self-compacting concrete in house building. Field tests and theoretical studies of possibilities and difficulties. Lund University, (2008).
4
[5] ACI 363R-10, Guide to Quality Control and Testing of High-Strength Concrete, American Concrete Institute (ACI), (2010).
5
[6] E. Shakeri, F. Bahman Zadeh, Evaluation Methods for Increasing the Durability of Concrete and Its Effect on the Economy. 8th National Congress on Civil Engineering, Babol, Iran, (2014) (In Persian).
6
[7] P. Mehta, P. J. M. Monteiro, Concrete, Microstructure Properties and Materials. McGraw-Hill Professional (2005).
7
[8] P. C. Hewlett, Lea’s Chemistry of Cement and Concrete. Butterworth-Heinemann (2003).
8
[9] M. Alexander, A. Bertron, N. De Belie, Performance of Cement-based Materials in Aggressive Aqueous Environments. Springer (2013).
9
[10] Allahverdi, F. Skvara, Acidic Corrosion of Hydrated Cement Based Materials Part2. Kinetics of the Phenomenon and Mathematical Models. Ceramics− Silikáty, 44(4) (2000) 152-160.
10
[11] Rahmani, A. A. Ramazanianpour, Effect of Binary Cement Replacement Materials on Sulfuric Acid Resistance of Dense Concretes. Magazine of concrete research, 60(2) (2008) 145-155.
11
[12] Hewayde, M. Nehdi, E. Allouche, G. Nakhla, Effect of Mixture Design Parameters and Wetting-Drying Cycles on Resistance of Concrete to Sulfuric Acid Attack. Journal of Materials in Civil Engineering, 19(2) (2007) 155-163.
12
[13] I. Fattuhi, B. P. Hughes, Ordinary Portland Cement Mixes with Selected Admixtures Subjected to Sulfuric Acid Attack. ACI Materials Journal, 85(6) (1988) 512-518.
13
[14] Sersale, G. Frigione, L. Bonavita, Acid Depositions and Concrete Attack: Main Influences. Cement and concrete research, 28(1) (1988) 19-24.
14
[15] Ramezanianpour, A.A.; Peidaiesh, M; Concrete knowledge (materials, properties, technology), Amirkabir university of technology press, Tehran, Iran (2010).
15
[16] A. Ramezanianpour, Cement Replacement Materials: Properties, Durability, Sustainability, Springer (2014).
16
[17] G. Alexander, C. Fourie, Performance of Sewer Pipe Concrete Mixtures with Portland and Calcium Aluminate Cements Subject to Mineral and Biogenic Acid Attack. Materials and Structures, 44(1) (2011) 313-330.
17
[18] S. Aydin, H. Yazici, H. Yigiter, B. Baradan, Sulfuric acid resistance of high-volume fly ash concrete. Building and Environment, 42(2), (2007) 717-721.
18
[19] J. Monteny, N. De Belie, L. Taerwe, Resistance of different concrete mixtures to sulfuric acid. Mateirals & Structures, 36(4), (1994) 242-249.
19
[20] Y. Senhadji, G. Escadeillas, M. Mouli, H. Khelafi, Influence of natural pozzolan, silica fume and limestone fine on strength, acid resistance and microstructure of mortar. Powder Technology, 254, (2014) 314-323.
20
[21] J. Monteny, E. Vincke, A. Beeldens, N. De Belie, L. Taerwe, D. Van Gemert, W. Verstraete, Chemical, Microbiological and In-Situ Test Methods for Biogenic Sulfuric Acid Corrosion of Concrete, Cement and Concrete Research, 30(4), (2000) 623–634.
21
[22] E. Vincke, E. V. Wanseele, J. Monteny, A. Beeldens, N. De Belie, L. Taerwe, W. Verstraete, Influence of Polymer Addition on Biogenic Sulfuric Acid Attack of Concrete, International Biodeterioration & Biodegradation, 49(4), (2002) 283-292.
22
[23] L. Rombe`n, Aspects of Testing Methods for Acid Attack on Concrete., CBI Forskning Research, Cement-och betong institutet, Stockholm , (1979).
23
[24] Z. T. Chang, X.J. Song, R. Munn, M. Marosszeky Using Limestone Aggregates and Different Cements for Enhancing Resistance of Concrete to Sulphuric Acid Attack., Cement and Concrete Research, 35(8), (2005) 1486-1494.
24
[25] Road, house and urban development research center, Iranian concrete mix design, Road, house and urban development research center Press (In Persian).
25
[26] ASTM C989, Standard specification for slag cement for use in concrete and mortars, ASTM international, West Conshohocken, PA, (2014).
26
[27] ASTM C618-12, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, ASTM international, West Conshohocken, PA. (2012).
27
[28] ASTM C494, Standard Specification for Chemical Admixtures for Concrete., ASTM International, West Conshohocken, PA. (2014).
28
[29] EN 480-5, Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption, European Standard (EN), (1997).
29
[30] Florida Department of Transportation (FDOT). Florida Method of Test for Concrete Resistivity as an Electrical Indicator of its Permeability, Florida Department of Transportation (2004).
30
[31] ASTM C597-09, Standard test method for pulse velocity through concrete, ASTM international, West Conshohocken, PA, (2009).
31
[32] ASTM C1012, Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution, ASTM International, West Conshohocken, PA, (2004).
32
ORIGINAL_ARTICLE
ارائهی مدل رگرسیونی چندگانه وزنی برای تورهای کاری سفرهای درونشهری در رویکرد فعالیت- مبنا
چکیده: در یک تقسیم بندی کلان، مدل سازی در برنامه ریزی حمل و نقل به دو دسته ی سفر-مبنا و فعالیت- مبنا تقسیم می شود در رویکرد فعالیت-مبنا، برای باز تولید زنجیره ی سفر هر فرد، محل انجام فعالیت های روزانه فرد مدل و در نهایت زنجیره سفر هر فرد استخراج می گردد. از همفزون سازی زنجیره سفر افراد در هر ناحیه برای ساعت مشخص، ماتریس مبدا- مقصد بدست می آید در مقاله جاری، با استفاده از مشخصات اقتصادی- اجتماعی همفزون نواحی و بررسی اثرگذاری مشخصات کاربری زمین، مدل خطی تور هر منطقه باز تولید و ارائه شده است. برای ساخت این مدل از اطلاعات مبدا- مقصد استفاده شده در فرآیند چهارمرحله ای استفاده شده است که نسبت به اطلاعات رویکرد فعالیت-مبنا هزینه گردآوری کمتری لازم دارد.مدل سازی تور شهروندان به دلیل ناهمسانی واریانس خطاها با استفاده از روش حداقل مربعات وزنی صورت پذیرفت که در نتیجه رگرسیون خطی چندگانه وزنی با متغیرهای مستقل جمعیت و تعداد شاغلین بر حسب وزن تعداد شاغلین بدست آمد. ناهمسانی واریانس کارایی مدل را تحت تاثیر قرار می دهد و دیگر ویژگی حداقل واریانس ضرایب تامین نمی شود در مقایسه با نتایج رگرسیون چند گانه معمولی با متغیر مستقل تعداد شاغلین و جمعیت مقدار F برابر با 689(27 درصد رشد) است. مقدار تست t متغیر مستقل جمعیت از 2/79 در حالت غیر وزنی به 2/72 کاهش پیدا کرده است که تغییر ناچیزی است ولی برای متغیر مستقل از 2/62 به 3/40 (حدود 30 درصد) افزایش پیدا کرده است. علامت ضریب ثابت منفی است ولی مدقار آن بسیار کوچک بوده ( در مقایسه با مقدرا بیشینه مشاهده 7202 تور (0/069 درصد) و میانگین 1386 تور (0/36 درصد) و مقدار R2 (0/927 ) و قابل قبول است.
https://ceej.aut.ac.ir/article_699_16e6f0bb6e8c77cd8315aaefde111975.pdf
2018-04-21
139
148
10.22060/ceej.2016.699
مدل فعالیت- مبنا
تور
رگرسیون چندگانه وزنی
قزوین
علیرضا
ماهپور
ar.mahpour@modares.ac.ir
1
مرکز تحقیقات راه، مسکن و شهرسازی، تهران، ایران
AUTHOR
سید احسان
سید ابریشمی
seyedabrishami@modares.ac.ir
2
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس، تهران، ایران
LEAD_AUTHOR
امیررضا
ممدوحی
armamdoohi@modare.ac.ir
3
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس، تهران، ایران
AUTHOR
امیرحسین
باغستانی
amirhosein.baghestani@yahoo.com
4
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس، تهران، ایران
AUTHOR
[1] T.A Arentze, D. Ettema, H.J.P. Timmermans, Estimating a model of dynamic activity generation based on one-day observations: Method and results, Transportation Research Part B, 45 (2) (2011) 447-460.
1
[2] C.R. Bhat, F.S. Koppelman, A conceptual framework of individual activity program generation, Transportation Research, 27 (1) (1993) 433-446.
2
[3] C.R. Bhat, Recent Methodological advances relevant to activity and travel behavior analysis, IATBR Conference, Texas-USA, 1997.
3
[4] J.L. Bowman, M.A. Bradley, Activity-based models: approaches used to achieve integration among trips and tours throughout the day, European Transport Conference, Leeuwenhorst- Netherlands, 2008.
4
[5] J.L. Bowman, Historical development of activity based models: theory and practice, Traffic Engineering and Control, 50 (3) (2009) 314–318.
5
[6] D.F. Ettema, H.J.P Timmermans, Activity-based approaches to travel analysis: Chapter one: Theories and Models of Activity Patterns, First Edtition, Pergamon- Elsevier, 1997.
6
[7] T. Hagerstrand, What about people in regional science? The Regional Science Association, 24(1) (1970) 7-21.
7
[8] P.M. Jones, New approaches to understanding travel behaviour: the human activity approach, in Hensher and Stopher (eds.), Behavioral Travel Modeling, Croom Helm, London, United Kingdom, 1979.
8
[9] M.D. Meyer, E.J. Miller, Urban transportation planning, Third edition, McGraw Hill, New York, USA, 2004.
9
[10] E.I. Pas, F.S. Koppelman, An examination of the determinants of day-to-day variability in individuals' urban travel behavior, Transportation, 14 (4) (1987) 3-20.
10
[11] E.I. Pas, The effect of selected sociodemographic characteristics on daily travel activity behavior. Environment and Planning A, 16(2) (1984) 571-581.
11
[12] E.I. Pas, Weekly travel-activity behavior, Transportation, 15(2) (1988) 89-109.
12
[13] W. Recker, G. McNally, S. Root, , A model of complex travel behavior: part II, An operational model, Transportation Research Part A, 20(1) (1986) 319-330.
13
[14] Y. Shiftan, M. Ben-Akiva, K. Proussaloglou, G.D. Jong, Y. Popuri, K. Kasturirangan S. Bekhor, Activity-Based modeling as a tool for better understanding travel behavior, 10th International Conference on Travel Behavior Research, Lucerne-Switzerland, 2003.
14
[15] C.H.U Zhaoming, H. Chen, L. Cheng, A review of activity based travel demand modeling, ASCE, 12(1) (2012) 48- 59.
15
[16] A. Sivakumar and A. Pinjari, Recent advances in activity and travel pattern modelling, Transportation, 39 (2) (2012) 749- 754.
16
[17] L. Yang, G. Zheng, X. Zhu, Cross- nested logit model for the joint choice of residential location, travel mode, and departure time, Habitat International, 38(3) (2013) 157-166.
17
[18] H. Kim, C. Kim, D. Park, Y. Kim, A tour-based approach to destination choice modeling incorporating agglomeration and competition effects, Proceedings of the Eastern Asia Society for Transportation Studies, 8(1) (2011) 101-112.
18
[19] A. Ettema, A. Borgers, H.J.P. Timmermans, A competing risk hazard model of activity choice, timing, sequencing, and duration, In Transportation Research Record: Journal of the Transportation Research Board, 1493(1) (1995) 101-109.
19
[20] C.R. Bhat, A hazard-based duration model of shopping activity with nonparametric baseline specification and nonparametric control for unobserved heterogeneity, Transportation Research B, 30(1) (1996) 189-207.
20
[21] F. Golob, H. Meurs, A structural model of temporal change in multi-modal travel demand, Transportation Research Part A, 21(1) (1987) 391-400.
21
[22] F. Golob, Review: Structural equation modeling for travel behavior research, Transportation Research Part B, 37(2) (2003) 1- 25.
22
[23] R. Kitamura, E.I. Pas, V. Lula, K. Lawton and E. Benson, The sequenced activity mobility simulator (SAMS): An integrated approach to modeling transportation, land use and air quality, Transportation, 23(1) (1996) 267-291.
23
[24] P.A. Salvini, E.J. Miller, ILUTE: An Operational prototype of a comprehensive microsimulation model of urban systems, Networks and Spatial Economics, 5(1) (2005) 217- 234.
24
[25] C.Q. Ho, C. Mulley, Multiple purposes at single destination: A key to a better understanding of the relationship between tour complexity and mode choice, Transportation Research Part A, 49(1) (2013) 206- 219.
25
[26] W. Navidi, Principles of statistics for engineers and scientists, First Edition, McGraw Hill, New York-USA, 2011.
26
[27] J.L. Bowman, Activity based Travel Demand Model System with Daily Activity Schedules, M.Sc. Thesis, Massachusetts Institute of Technology, USA, 1995.
27
[28] J.L. Bowman, The day activity schedule approach to travel demand analysis, Ph. D. thesis, Massachusetts Institute of Technology, USA, 1998.
28
[29] Qazvin transportation and traffic Comprehensive studies, Socioeconomic and Land use Report, Qazvin municipality, 2011, In Persian.
29
ORIGINAL_ARTICLE
مدلسازی کامل سه بعدی حفر تونل و نصب پوشش با تاکید بر حفاری مرحلهای، مقایسه تحلیل سه بعدی با دوبعدی
در این مقاله به مدلسازی سهبعدی و کامل تونل با در نظرگرفتن حفاری و نصب پوشش به صورت گام به گام پرداخته میشود. مدلسازی کامل سهبعدی تونل با روش اجزا محدود میتواند تا حد بسیار مطلوبی نشاندهنده رفتار طولی و عرضی زمین در مقابل پیشرفت مراحل حفر و نصب پوشش باشد. با مقایسه نشست طولی بدست آمده از تحلیل عددی با روابط تجربی ارائه شده، تطابق خوبی بین نتایج مشاهده شد. همچنین دیده شد که اثر شرط مرزی ابتدای مدل تا 5 برابر قطر تونل وجود دارد و از این طول به بعد نشست به حالت پایدار و بیشینه خود میرسد. با افزایش عمق تونل نشست سطحی زمین در قبل از سینه کار کمتر و بعد از سینه کار بیشتر میگردد. مطابق با دیگر نتایج بدست آمده، پروفیلهای طولی نشست حاصل از عمقهای مختلف تونل، در محل سینه کار یکدیگر را قطع میکنند، یعنی نشست سطحی زمین در محل سینه کار برای تونلهای با عمق مختلف یکسان میشود. در بخش دیگر این مقاله پروفیل عرضی بدست آمده از تحلیل دوبعدی با پروفیل متناظرش از تحلیل سهبعدی مقایسه میگردد، با تطابق سطح زیر نمودار این دو پروفیل، میتوان به پارامتر درصد آزاد سازی تنش که یکی از پارامترهای کلیدی در تحلیلهای دوبعدی است، رسید.
https://ceej.aut.ac.ir/article_708_d274a27045d0f3f06097e72d8ec518a1.pdf
2018-04-21
149
160
10.22060/ceej.2016.708
تحلیل سه بعدی تونل
پروفیل طولی نشست
درصد آزادسازی تنش
مدل دوبعدی
حفاری مرحله ای
علی
لکی روحانی
rou001@znu.ac.ir
1
گروه عمران، دانشکده فنی، دانشگاه زنجان، زنجان، ایران
LEAD_AUTHOR
سمیه
جلفایی
somaiejolfaei@gmail.com
2
گروه عمران، دانشکده فنی، دانشگاه زنجان، زنجان، ایران
AUTHOR
[1] P. Guedes, C. Santos Pereira, The role of the soil K0 value in numerical analysis of shallow tunnels, in: of: Proc. of the International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, 2000, pp. 379-384.
1
[2] R.J. Jardine, D. Potts, A. Fourie, J. Burland, Studies of the influence of non-linear stress–strain characteristics in soil–structure interaction, Geotechnique, 36(3) (1986) 377-396.
2
[3] G. Lee, C. Ng, Three-dimensional analysis of ground settlements due to tunnelling: Role of K0 and stiffness anisotropy, in: of: Proc. of the International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, 2002, pp. 617-622.
3
[4] P. Vermeer, P. Bonnier, S. Möller, On a smart use of 3D-FEM in tunnelling, in: Proceeding of eighth international symposium on numerical models in geomechanics, 2002, pp. 361-366.
4
[5] R.B. Peck, Deep excavations and tunneling in soft ground, Proc. 7th Int. Con. SMFE, State of the Art, (1969) 225-290.
5
[6] B. Schmidt, Prediction of settlements due to tunneling in soil: three case histories, in: Rapid Excavation and Tunneling Conf, 2nd Proc, 1974.
6
[7] P. Attewell, Predicting the dynamics of ground settlement and its derivatives caused by tunnelling in soil, Ground engineering, 15 (1982) 36.
7
[8] M. Panet, A. Guenot, Analysis of convergence behind the face of a tunnel: Tunnelling 82, proceedings of the 3rd international symposium, Brighton, 7–11 June 1982, P197–204. Publ London: IMM, 1982, in: International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Pergamon, 1983, pp. A16.
8
[9] M. Panet, Le calcul des tunnels par la méthode convergence-confinement, Presses ENPC, 1995.
9
[10] F. Corbetta, D. Bernaud, D.N. Minh, Contribution à la méthode convergence-confinement par le principe de la similitude, Revue Française de Géotechnique, (54) (1991) 5-11.
10
[11] C. Carranza-Torres, C. Fairhurst, Application of the convergence-confinement method of tunnel design to rock masses that satisfy the Hoek-Brown failure criterion, Tunnelling and Underground Space Technology, 15(2) (2000) 187-213.
11
[12] T. Unlu, H. Gercek, Effect of Poisson's ratio on the normalized radial displacements occurring around the face of a circular tunnel, Tunnelling and Underground Space Technology, 18(5) (2003) 547-553.
12
[13] C. Oteo, J. Moya, Estimation of the soil parameters of Madrid in relation to the tunnel construction, in: Proc 7th Euro conf. on soil mechanics and foundation engineering, 1979, pp. 239-247.
13
[14] M. Romo, M. Diaz, Face stability and ground settlement in shield tunneling, in: Proceedings of the Tenth International Conference on Soil Mechanics and Foundation Engineering, Stockholm., 1981.
14
[15] C. Sagaseta, Analysis of undrained soil deformation due to ground loss, Geotechnique, 38(4) (1988).
15
[16] A. Verruijt, J. Booker, Surface settlements due to deformation of a tunnel in an elastic half plane, Geotechnique, 48(5) (1998) 709-713.
16
[17] N. Loganathan, H. Poulos, Analytical prediction for tunneling-induced ground movements in clays, Journal of Geotechnical and geoenvironmental engineering, 124(9) (1998) 846-856.
17
[18] A. Bobet, Analytical solutions for shallow tunnels in saturated ground, Journal of Engineering Mechanics, 127(12) (2001) 1258-1266.
18
[19] C. Gonzalez, C. Sagaseta, Patterns of soil deformations around tunnels. Application to the extension of Madrid Metro, Computers and Geotechnics, 28(6-7) (2001) 445-468.
19
[20] M. Melis, L. Medina, J.M. Rodríguez, Prediction and analysis of subsidence induced by shield tunnelling in the Madrid Metro extension, Canadian Geotechnical Journal, 39(6) (2002) 1273-1287.
20
[21] K.-H. Park, Analytical solution for tunnelling-induced ground movement in clays, Tunnelling and underground space technology, 20(3) (2005) 249-261.
21
[22] A. Osman, M. Bolton, R. Mair, Predicting 2D ground movements around tunnels in undrained clay, Géotechnique., 56(9) (2006) 597-604.
22
[23] F. Pinto, A.J. Whittle, Ground movements due to shallow tunnels in soft ground. I: Analytical solutions, Journal of geotechnical and geoenvironmental engineering, 140(4) (2013) 04013040.
23
[24] E. Hanafy, J. Emery, Advancing face simulation of tunnel excavation and lining. Placement, in: Underground Rock Engineering, 13th Canadian Rock Mechanics Symposium, 1980, pp. 119-125.
24
[25] S.C. Möller, Tunnel induced settlements and structural forces in linings, Univ. Stuttgart, Inst. f. Geotechnik Stuttgart, Germany, 2006.
25
[26] H.-M. Mödlhammer, Numerical methods for tunneling using ABAQUS and investigations of long-time-effects of the shotcrete shell and its impact on the combined support system, na, 2011.
26
[27] J. Franzius, D. Potts, J. Burland, The influence of soil anisotropy and K0 on ground surface movements resulting from tunnel excavation, Géotechnique, 55(3) (2005) 189-199.
27
[28] E. Hoek, Support for very weak rock associated with faults and shear zones, Rock support and reinforcement practice in mining, (1999) 19-32.
28
[29] S. Maraš-Dragojević, Analysis of ground settlement caused by tunnel construction, Građevinar, 64(07.) (2012) 573-581.
29
ORIGINAL_ARTICLE
مطالعه عددی پایداری گودهای عمیق به روش میخ کوبی با ارائه جداول و نمودار های کمک طراحی
در سال های اخیر به علت شتاب گرفتن ساخت و ساز ساختمان های بلند در اکثر کلان شهر ها، گودبرداری های عمیق و نیمه عمیق در پروژه های عمرانی انجام می شود. پایدار سازی جداره گود جزو ضروریات یک پروژه می باشد که در مبحث هفتم مقررات ملی ساختمان نیز به آن اشاره شده است. روش های مختلفی برای این پایدار سازی وجود دارد که به شرح زیر می باشند: روش خرپایی، مهار متقابل، سپرکوبی، اجرای شمع، دیوار دیافراگمی و سیستم مهار به پشت و میخ کوبی. نبود مرجعی کامل برای طراحی مقدماتی دیوار میخ کوبی شده در شرایطی که عمق گود، سربار کنار گود و نوع خاک متفاوت باشد می تواند از دغدغه های بسیاری از طراحان، کارفرمایان و مجریان باشد. این جداول و نمودارها می توانند همانند آنچه که مهندسین مشاور اینترکان در مورد سازه های نگهبان خرپایی ارائه نموده اند، دید اولیه خوب و مناسبی به دست اندرکاران صنعت ساختمان بدهد. در این مقاله با تغییر مشخصات مقاومتی خاک (چسبندگی و زاویه اصطکاک داخلی) در محدوده خاک های متداول و هم چنین انواع سربار کنار گود (ماکزیمم معادل یک ساختمان شش طبقه)، برای گودهای با عمق مختلف( ماکزیمم تا پنج طبقه زیرزمین)، طراحی انجام شده است. برای هر گود با مشخصات متفاوت براساس آئین نامه های معتبر، چندین مدل( به طور متوسط 50 مدل) در نرم افزارهای تعادل حدی ( جهت محاسبه ضریب اطمینان) والمان محدود (جهت محاسبه تغییر شکل و نیرو) بررسی شده تا طراحی ها اقتصادی باشند و در نهایت منجر به ارائه جداول و نمودارهای کمک طراحی شده است. سیستم میخ کوبی برای گودهای تا عمق m 13 با سربار حداکثرkN/m2 60 (معادل ساختمان 6 طبقه) در زمین هایی که مناسب این روش هستند جوابگو بوده، اما برای اعماق و یا سربارهای بیشتر نیاز به سیستم های ترکیبی ( به طور مثال سیستم ترکیبی میخ کوبی و انکر) می باشد.
https://ceej.aut.ac.ir/article_965_a0d7989a720c40921ca5a86d15640e04.pdf
2018-04-21
161
178
10.22060/ceej.2017.11778.5076
پایدار سازی گود
میخ کوبی
جداول و نمودارهای طراحی
مدل سازی عددی
سید حمید
لاجوردی
hamidlajevardi@yahoo.com
1
دانشکده مهندسی عمران، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران
LEAD_AUTHOR
سید شایان
آزادی منش
shayanazadimanesh@yahoo.com
2
دانشکده مهندسی عمران، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران
AUTHOR
ابوالقاسم
معزی
ghasemmoezi@yahoo.com
3
دانشکده مهندسی عمران، دانشگاه قم، قم، ایران
AUTHOR
[1] H. Ashrafi, Basics of excavation and guard structures, editing National regulations office, Tehran, 2006.
1
[2] C. lazarte, V. Elias, d. Espinoza, p. Sabatini, Soil Nail Wall, JahadDaneshgahi, Tehran, 2011.
2
[3] M. Rabie, Performance of hybrid MSE/Soil Nail walls using numerical analysis and limit equilibrium approaches, HBRC, 12(1) (2014) 63-70.
3
[4] S. Ghareh, Parametric assessment of soil-nailing retaining structures in cohesive and cohesionless soils, Measurement, 73 (2015) 341-351.
4
[5] C. Lazarte, V. Elias, D. Espinoza, p. Sabatini, Soil Nail Wall, Federal Highway Administration, Washington D.C, USA, 2003.
5
[6] M. Puller, Deep Excavations: A Practical Manual 2nd Edition, Thomas Telford Ltd United Kingdom, 2016.
6
[7] S.S. Liew, c.m. khoo, Performance of Soil Nail Stabilisation Works for a 14.5m Deep Excavation at Uncontrolled Fill Ground, in: Proceedings-DFI/EFFC 10th international conference on piling and Deep Foundations, Amsterdam, Netherlands, 2006, pp. 8.
7
[8] G.L. Sivakumar Babu, S. Vikas Pratap, Numerical analysis of performance of soil nail walls in seismic conditions, ISET Journal of Earthquake Technology, (2008).
8
[9] C.W.W. Negi, R.Z.B. ZHOU, M. ZHANG, The effects of soil nails in serviceability of soil nailed slopes, University of Dundee, uk, 2006.
9
[10] J.L. Briaud, Y. Lim, Tieback Walls In Sand: Numerica Simulation And Desing Implications, Rep., College Station, Texas, 1996.
10
ORIGINAL_ARTICLE
بررسی اثر ترکیب سیمان و نانوسیلیس بر روی مقاومت برشی خاک ماسه ای بابلسر
در بسیاری از موارد خاک طبیعی محل مقاومت لازم را نداشته و نیاز به به سازی دارد. از جمله این روشها، اصلاح خاک با استفاده از مواد افزودنی است. در این روش خصوصیات مهندسی خاک با مخلوط شدن با یک یا چند ماده دیگر ارتقاء مییابد. نانوسیلیس که یک پوزولان بسیار فعال جهت انجام واکنشهای سیمانی شدن است، نیز میتواند به عنوان تثبیت کننده در نظر گرفته شود. در این تحقیق به بررسی تاثیر ترکیبی از سیمان و نانو سیلیس بر مقاومت برشی خاک ماسهای بابلسر در فواصل زمانی 7 و 28 روزه پرداخته شده است. آزمایش برش مستقیم بر روی نمونههای حاوی 4، 6 و8 درصد وزن خشک ماسه، سیمان و30،10 و50 درصد وزنی سیمان، نانوسیلیس در تراکم 98 درصد ترتیب داده شده است. نتایج نشان داد که افزودن نانوسیلیس به سیمان تا 30درصد جایگزینی با سیمان، باعث افزایش 2 برابری مقاومت برشی نمونهها، نسبت به نمونه هایی که فقط از سیمان استفاده شده است میشود و با افزایش بیش از این مقدار مقاومت برشی نمونهها کاهش مییابد.
https://ceej.aut.ac.ir/article_910_dd7f7a3ff0b7531be6aa23867381118a.pdf
2018-04-21
179
188
10.22060/ceej.2017.11358.5010
به سازی خاک
مقاومت برشی
نانوسیلیس
سیمان
ماسه بابلسر
عیسی
شوش پاشا
shooshpasha@nit.ac.ir
1
دانشکده عمران، دانشگاه صنعتی نوشیروانی بابل،مازندران، ایران
LEAD_AUTHOR
مجتبی
عباسی
mojtaba.abasi13@yahoo.com
2
دانشکده عمران، موسسه آموزش عالی صنعتی مازندران، مازندران، ایران
AUTHOR
هادی
نجف نیا
h.najafniya@gmail.com
3
دانشکده عمران، دانشگاه تربیت دبیر شهید رجایی، تهران، ایران
AUTHOR
[1] Dermatas, D., Meng, X.G., Utilization of fly ash for stabilization /solidification of heavy metal contaminated soils. Engineering Geology 70: (2003) 377-394.
1
[2] Gutierrez, M. S., Nano-geomechanics potential applications of nano-mechanics in geotechnical engineering. in: Proc. of the International Workshop on Micro-Geomechanics Across Multiple Strain Scales Cambridge, UK: (2005) 29-30.
2
[3] Naderi, N., Naeini, S.A., The influence of polymer inclusion and plasticity index on the unconfined compression strength of clays. Proc. of the 2nd International Conf. on New Developments in Soil Mechanics and Geotechnical Engineering, Nicosia, North Cyprus. (2009)
3
[4] Dupas, J., Pecker, A., Static and dynamic properties of sand cement. Journal of Geotechnical ASCE J Geotech Eng 105(3) (1979) 419-436.
4
[5] Shihata, S. A., Baghdadi, Z.A.,. Simplified method to assess freeze-thaw durability of soil cement. Journal of Materials in Civil Engineering 13(4) (2001) 243-247.
5
[6] Esmaeilipour, E., The effect of recession on cement industry and solutions to exit from it. Cement Technology Journal, (2015) (In Persian).
6
[7] Yılmaz, B., Uçar, A., Öteyaka, B., Uz, V., Properties of zeolitic tuff (clinoptilolite) blended portland cement. Building and Environnement 42(11) (2007) 3808-3815.
7
[8] Ardestani, P., The environmental effects of using nanosilica in concrete. MS.C. thesis, K. N. Toosi University of Technology, (2008) (In Persian).
8
[9] Ramzanianpour, A., Firoozmakan, Sh., Ebadi, T., Bahrami, H., The effect of nanosilica on the physical properties and durability of concrete. 6th Civil Engineering Congress, Semnan, (2011) (In Persian).
9
[10] Sobolev, K., Flores, I., Hermosillo, R., Torres-Martinez, L., Nanomaterials and nanotechnology for high-performance cement composites. Journal of American Concrete Institute 254 (2006) 93-129.
10
[11] Tobon, J. L., Restrepo, O. J., Paya, J., Comparative analysis of performance of portland cement blended with nano silica and silica fume. Dyna Magazine 163 (2010) 37-48.
11
[12] Ghazavi, M., Boulhasani, M., Design and construction of grout using lime and nanosilica for stabilization of kaolinite and study of its parameters for application in trash burying sites. 2nd International Symposium of Environment, (2009) (In Persian).
12
[13] Taha, M. R. (2009). "Geotechnical properties of soil-ball milled soil mixtures" Nanotechnology in Construction 3: 377-385.
13
[14] Yonekura, R., Miwa, M. (1993). "Fundamental properties of sodium silicate based grout." Proceedings of the 11th Southeast Asia Geotechnical Conference, Singapore: 439-444
14
[15] Gallagher, P. M., Mitchel, J. K., Influence of collodical silica grout on liquefaction potential and cyclic undrained behavior ond loose sand. Soil Dynamics and Earthquake Engineering 22 (2002) 1017-1026.
15
[16] Taipodia, J., Dutta, J., Dey, A.K., Effect of nano particles on properties of soil. Proceedings of Indian Geotechnical Conference, December 15-17, (2011) Kochi.
16
[17] Mohamadzadeh Sani, A., Arabani, M., Haghi, A.K., Chenari, R.J., Effect of nanoclay additive on the geotechnical properties of silty sands. in: Proc. of 4th International Conference on Geotechnical Engineering and Soil Mechanics, Tehran, (2010) (In Persian).
17
[18] Janalizadeh Choobbasti, A., Vafaei, A., Soleimani Kutanaei, S., Evaluation of the combined effect of cement and nanosilica on the strength of Caspian sea sand. 1st National Conference on Geotechnical Engineering, University of Mohaghegh Ardabili, (2013) (In Persian).
18
[19] Sadrjamali, M., Athar, S. M., Negahdar, A., Modifying soil shear strength parameters using additives in laboratory condition. Curr World Environ 10(1) (2015) 120-130.
19
[20] Annual Book of ASTM Standards, Standard test method for sieve analysis of fine and coarse aggregates. American Society for Testing and Materials, West Conshohocken. (2012)
20
[21] Annual Book of ASTM Standards, Standard test methods for minimum index density and unit weight of soils and calculation of relative density. American Society for Testing and Materials, West Conshohocken. (2012)
21
[22] Annual Book of ASTM Standards, Standard test methods for maximum index density and unit weight of soils using a vibratory table. American Society for Testing and Materials, West Conshohocken. (2012)
22
[23] Annual Book of ASTM Standards, Standard test for specific gravity of soil solids by water pycnometer. American Society for Testing and Materials, West Conshohocken. (2012)
23
[24] Noorzad, R., The behavioral characteristics of geotextile-reinforced sand. Ph.D. thesis, Sharif University, Tehran, (2000) (In Persian).
24
[25] Sadaghiani, M., Nasr, M., A study on the effect of concentration on the permeability and physical and mechanical behavior of injected sand with silicate grout. 4th National Congress on Civil Engineering, (2008) (In Persian).
25
[26] Annual Book of ASTM Standards, Standard test methods for laboratory compaction characteristics of soil. American Society for Testing and Materials, West Conshohocken. (2012)
26
[27] Annual Book of ASTM Standards, Standard test method for direct shear test of soils under consolidated drained conditions. American Society for Testing and Materials, West Conshohocken. (2012)
27
[28] Ladd, R. S., Preparing test specimens using undercompaction. Geotechnical Testing Journal 1(1) (1978) 16-23.
28
ORIGINAL_ARTICLE
مطالعه عددی و آزمایشگاهی بر روی رفتار لرزهای خاک میخ کوبی شده به منظور ارائه ضریب شبه استاتیکی بر اساس سطوح عملکرد
با توجه به گسترش استفاده از روش طراحی بر مبنای عملکرد لرزهای در میان سازههای ژئوتکنیکی طی دو دهة اخیر و محروم ماندن سیستمهای میخ کوبی از این توسعه، در این تحقیق کوشش شده است تا ضریب شبه استاتیکی به عنوان تابعی از پارامترهای اصلی زلزله، ویژگیهای ژئوتکنیکی در قالب شرایط ساختگاهی و سطوح عملکرد دیوار میخ کوبی شده معرفی گردد. به این منظور، با استفاده از آزمایشات میز لرزه بر روی مدل فیزیکی سیستم میخ کوبی به تعیین مرزهای سطوح عملکرد این سیستم در شرایط لرزهای و هندسی مختلف پرداخته شده است. سپس با تکیه بر نتایج حاصل از مدلسازی عددی سیستم میخ کوبی در قالب تغییر شکلهای ماندگار و تعیین ضریب شبه استاتیکی معادل هر یک از مدلهایهای عددی مورد مطالعه با استفاده از آنالیزهای تعادل حدی، به ارائة ضریب شبه استاتیکی معادل با سطوح عملکرد پرداخته شده است. نتایج حاصل در قالب تقسیمات ساختگاهی و لرزهای مطابق با آییننامه 2800 ایران و بصورت مجزا ارائه شده است که بیانگر تأثیر چشمگیر نوع ساختگاه و شرایط لرزهای بر انتخاب ضریب شبه استاتیکی معادل با سطوح عملکرد میباشد. از سوی دیگر، سطح گسیختگی مشاهده شده در این سیستم یک سطح گسیختگی منحنیالخط با نقطة عطف مشخص می باشد به نحوی که مکان هندسی آن به عنوان تابعی از طول میخها تعریف میشود. همچنین، صرف نظر از طول میخهای مختلف، مقادیر x/H = 0/5%∆ بعنوان مرز وقوع تغییر شکلهای پلاستیک و مقادیر x/H = 3/75%∆ به عنوان مرز تشکیل گوه گسیختگی و وقوع تخریب برای سیستم میخ کوبی مشاهده شد.
https://ceej.aut.ac.ir/article_911_09f486ca3d8981ba0d57e449453b437d.pdf
2018-04-21
189
210
10.22060/ceej.2017.11737.5068
خاک میخ کوبی شده
عملکرد لرزهای
ضریب شبه استاتیکی
سطوح عملکرد
مکانیزم گسیختگی
مجید
یزدان دوست
mj.yazdandoust@srbiau.ac.ir
1
گروه عمران، دانشکده فنی و مهندسی دانشگاه آزاد اسلامی، واحد علوم و تحقیقات، تهران، ایران
LEAD_AUTHOR
[1] GEOGUIDE 7, Guide to Soil NAIL Design and Construction, The Government of the Hong Kong Special Administrative Region, 2008.
1
[2] FHWA-NHI-14-007, Soil Nail Walls Reference Manual, Federal Highway Administration and National Highway Institute, Washington DC, 2015.
2
[3] L.J. Su, J.H. Yin, W.H. Zhou, Influences of overburden pressure and soil dilation on soil nail pull-out resistance, Computers and Geotechnics Journal, 37(2) (2010) 555-564.
3
[4] S.A. Tan, P.H. Ooi, T.S. Park, W.L. Cheang, Rapid Pullout Test of Soil Nail, Journal of Geotechnical and Geoenvironmental Engineering, 134(9) (2008) 1327-1338.
4
[5] M. Choukeir, I. Juran, S. Hanna, Seismic Design of Reinforced- Earth and Soil-Nailed Structures, Ground Improvement, 1(1997) 223-238.
5
[6] I. Juran, G. Baudrand, K. Farrang, V. Elias, Kinematical Limit Analysis for Design of Soil-Nailed Structures, Journal of Geotechnical Engineering, 116(1) (1990) 54-72.
6
[7] M.R. Tufenkjian, M. Vucetic, Dynamic failure Mechanism of Soil- Nailed Excavation Models in Centrifuge, Journal of Geotechnical and Geoenvironmental Engineering, 126(3) (2000) 227-235.
7
[8] Y. Hong, R. Chen, C. Wu, J. Chen, Shaking Table Test and Stability Analysis of Steep Nailed Slopes, Canadian Geotechnical Journal, 42(2005) 1264- 1279.
8
[9] G.L. Sivakumar Babu, V. Pratap Singh, Numerical Analysis of Performance of Soil Nail Walls in Seismic Conditions, ISET Journal of Earthquake Technology, 45(1-2) (2008) 31-40.
9
[10] D. Giri, A. Sengupta, Dynamic Behavior of Small Scale Nailed Soil Slopes, Geotechnical and Geological Engineering, 27(2009) 678-698.
10
[11] A. Sengupta, D. Giri, Behavior of nailed steep slopes in laboratory shake table tests, in: Proceedings of the Fifth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, California, 2010.
11
[12] L.P. Wang, G. Zhang, J.M. Zhang, Nail reinforcement mechanism of cohesive soil slopes under earthquake conditions, Soils and Foundations, 50 (4) (2010) 459-469.
12
[13] S. He, C. Ouyang, Y. Luo, Seismic stability analysis of soil nail reinforced slope using kinematic approach of limit analysis, Environmental Earth Sciences, 66(1) (2012) 319-326.
13
[14] F. Tatsuoka, H. Mun˜ oz, T. Kuroda, H. Nishikiori, R. Soma, T. Kiyota, M. Tateyama, K. Watanabe, Stability of existing bridges improved by structural integration and nailing, Soils and Foundations, 52(3) (2012) 430-448.
14
[15] S. Majidian, A. Komakpanah, 2D numerical modelling of soil-nailed structures for seismic improvement, Geomechanics and Engineering Journal, 5(1) (2013) 37-55.
15
[16] S. Zamiran, H. Ghojavand, H. Saba, Numerical Analysis of Soil Nail Walls under Seismic Condition in 3D Form Excavations, Applied Mechanics and Materials, 204-208(2012) 2671-2676.
16
[17] V.M. Rotte, B.V.S. Viswanadham, Centrifuge and Numerical Model Studies on the Behaviour of Soil-Nailed Slopes with and without Slope Facing, in: Proceedings of the International Conference on Tunneling and Underground Construction, ASCE, China, 2014, pp. 581-591.
17
[18] S.L. Kramer, Performance-based design methodologies for geotechnical earthquake engineering, Bulletin of Earthquake Engineering, 12(3) (2013) 1049-1070.
18
[19] S.L. Kramer, C. Valdez, B. Blanchette, J.W. Baker, Performance-Based Design Factors for Pile Foundations, PEER Report Pacific Earthquake Engineering Research Center College of Engineering University of California, Berkeley, 2014.
19
[20] C. Ledezma, J. Bray, Probabilistic Performance-Based Procedure to Evaluate Pile Foundations at Sites with Liquefaction-Induced Lateral Displacement, Journal of Geotechnical and Geoenvironmental Engineering 136(3) (2010) 464-476.
20
[21] Y. Wu, S. Prakash, Design Charts for Retaining Walls in Seismic Areas, GeoFlorida 2010, pp. 2973-2981.
21
[22] A.L. Simonelli, P. Penna, Performance-based design of gravity retaining walls under seismic actions, Eurocode 8 Perspectives from the Italian Standpoint Workshop, Doppiavoce, Napoli, Italy, 2009, pp. 277-289.
22
[23] B. Doran, J. Shen, B. Akbas, Seismic Evaluation of Existing Wharf Structures Subjected to Earthquake Excitation: Case Study, Earthquake Spectra, 31(2) (2015) 1177-1194.
23
[24] J. Koseki, S. Nakajima, M. Tateyama, M. Shinoda, Seismic performance of geosynthetic-reinforced soil retaining walls and their performance-based design in Japan, in: Proceedings of the international conference on performance-based design in earthquake geotechnical engineering, IS-Tokyo, 2009, pp. 149-162.
24
[25] C.C. Huang, S.H. Wu, H.J. Wu, Seismic displacement criterion for soil retaining walls based on soil strength mobilization, Geotechnical and Geoenvironmental Engineering, 135(1) (2009) 74-83.
25
[26] M. Yazdandoust, Laboratorial and Numerical Studies on Reinforced Soil and Earth whit Steel Elements, Ph.D. Thesis, Tarbiat Modares Univercity, Tehran, Iran, 2013.
26
[27] R. J. Bathurst, K. Hatami, Influence of Reinforcement Stiffness, Length and Base Condition on Seismic Response of Geosynthetic Reinforced Soil Wall, in: Proceedings of the 6th International Conference on Geosynthetics, USA, 1998, pp. 613-616.
27
[28] No S. 2800, Iranian Code of Practice for Seismic Resistant Design of Buildings, Fourth Revision, Building and Housing Research Center, Tehran, 2014.
28
[29] K. Ishihara, A.M. Asal, Dynamic behavior of soils, soil amplification and soil structure interaction, final report for working group d, UNDP/UNESCO project on earthquake risk reduction in Balkan region, 1982.
29
[30] M.K. Jafari, A. Shafiee, A. Ramzkhah, Dynamic properties of the fine grained soils in south of Tehran, Journal of Seismology and Earthquake Engineering, 4(2002) 25-35.
30
[31] H.B. Seed, T.R. Wong, I.M. Idriss, K. Tokimatsu, Moduli and damping factors for dynamic analyses of cohesionless soils, Journal of Geotechnical Engineering, 112(11) (1986) 1016-1032.
31
[32] E.Y. Sharif, A.A. Al Bis, M.K. Harb, An Application of Geophysical Techniques for Determining Dynamic Properties of the Ground in Dubailand Area, UAE.”, Arab Center for Engineering Studies, 2008.
32
[33] J. Chai, J.P. Carter, Deformation Analysis in Soft Ground Improvement, Springer Science & Business Media, 2011.
33
[34] S.L. Kramer, Geotechnical Earthquake Engineering, Prentice Hall, 1996.
34
[35] FLAC Manual , Ver. 5.0, Itasca, USA, 2005.
35
[36] L.J. Su, J.H. Yin, W.H. Zhou, Influences of overburden pressure and soil dilation on soil nail pull-out resistance, Computers and Geotechnics, 37(2010) 555-564.
36
[37] NCHRP REPORT 701, Proposed Specifications for LRFD Soil-Nailing Design and Construction, in: National Cooperative Highway Research Program, 2011.
37
[38] PIANC, Seismic design guidelines for port structures, International Navigation Association, Working Group No. 34 of the Maritime Navigation Commission, Tokyo, 2001.
38
[39] C.C. Huang, J.C. Horng, W.J. Chang, J.S. Chiou, C.H. Chen, Dynamic behavior of reinforced walls e Horizontal displacement response, Geotextiles and Geomembranes, 29(2011) 257-267.
39
[40] D.M. Wood, Geotechnical Modeling, Version 2.2, 2014 (electronic copy).
40
ORIGINAL_ARTICLE
بررسی آزمایشگاهی ظرفیت باربری پی های نواری واقع بر خاک های چند لایه مجاور دیوار حائل مسلح شده با ژئوگرید
به طور کلی یک جداره ی قائم یا نزدیک به قائم ازخاک، عوارض طبیعی مشرف به جاده ها و دامنه های غیرطبیعی در حال سکون، در مقابل نیروی موجود وارد بر آنها مقاوم می باشند. با قرارگیری سربار تحت بار نواری روی عوارض یاد شده، ضعف عملکرد کششی خاک تحت شرایط مذکور می تواند موجب ناپایداری گردد که از مسائل مورد توجه در مهندسی ژئوتکنیک به شمار می آید. استفاده از خاک مسلح در طراحی شالوده ها و سازه های خاکی از قبیل دیوار حائل، یکی از ابداعاتی است که جزو متنوع ترین و اقتصادی ترین مسائل بهسازی خاک محسوب می شود.علیرغم پژوهش های فراوان پیرامون تکنیک خاک مسلح در خصوص تغییر مکان جانبی سطح دیوار حائل و ظرفیت باربری پی نواری قرار گرفته بر روی دیوار حائل تحت شرایط همگنی خاک، مطالعات اندکی بر روی این گونه دیوارها در شرایط خاک لایه بندی شده صورت گرفته است. نتایج مطالعه حاضر نشان می دهد که در حالت کلی با افزایش تعداد مسلح کننده ها با فواصل مناسب در خاکریز چند لایه، تغییر مکان جانبی سطح دیوار کاهش و ظرفیت باربری پی نواری افزایش می یابد. همچنین بیشترین ظرفیت باربری پی ناشی از قراردادن ژئوگریدها در نسبت عمق 25/0 (U/B=0.25)حاصل می شود. نتایج نشان می دهد که با افزایش طول لایه ژئوگرید، ظرفیت باربری افزایش و تغییرمکان کاهش می یابد، که ناشی از جلوگیری از توسعه سطح گسیختگی می باشد، نسبت طول ژئوگرید4 (L/B=4) به عنوان مقدار بهینه استخراج شده است همچنین در شرایطی که ضخامت لایه ها بیشتر از عرض پی می شود عملا ظرفیت باربری تابع لایه اول می باشد.
https://ceej.aut.ac.ir/article_917_148d49cdcddb26ca363a1781c778088f.pdf
2018-04-21
211
226
10.22060/ceej.2017.11883.5099
خاکریز لایه بندی شده
دیوار حائل انعطاف پذیر
ژئوگرید
ظرفیت باربری پی نواری
تغییر مکان دیوار حائل
علیرضا
شالچی
alireza.shalchi86@gmail.com
1
گروه عمران، واحد همدان، دانشگاه آزاد اسلامی،همدان، ایران
AUTHOR
وحید
رستمی
rostami@iauh.ac.ir
2
گروه عمران، واحد همدان، دانشگاه آزاد اسلامی،همدان، ایران
LEAD_AUTHOR
[1] R. N. Taylor, Modelling in ground engineering,Chapter 58 in Geotechnical Engineers Reference Book,F. G. Bell, Butterworth, London, (1987).
1
[2] H. Vidal, The principle of reinforced earth, Highway Research Record, 282(1969)1-16.
2
[3] S. B. Paulsen, A numerical Model for Estimating Siesmic Displacements of Reinforced Steep Slopes, M.S thesis, University of washington, 2002.
3
[4] L. N. Roessing, N. Sitar, Centrifuge studies of the seismic Response of Reiforced soil slopes, Third Geotechnical Engineering and soil Dynamic Conference, Geotechnical special publication, 75 (1998). 458-468
4
[5] L N. Roessig, N. Sitar, Centrifuge model studies of the seismic response of reinforced soil slopes, Proceeding of the Second Int. Conf. on Earthquake Geotechnical Engineering. University of California,Berkeley,(1999).
5
[6] D.V. Talwar, Behaviour of Reinforced Earth in Retaining Structures and Shallow Foundation, Ph.D. Thesis, University of Roorkee, Roorkee, India,(1981).
6
[7] I.N.A. Khan, Study of Reinforced Earth Wall and Retaining Wall With Reinforced Backfll, Ph.D. Thesis, University of Roorkee, Roorkee, India,(1991).
7
[8] S. Saran, K.G. Garg, R.K. Bhandari, Retaining wall with reinforced cohesionless backfill, Journal of Geotechnical Engineering, ASCE, 118(12)( 1992) 1869-1888 .
8
[9] K.G. Garg, S. Saran, Effective placement of reinforcement to reduce lateral earth pressure, Indian Geotechnical Journal, 27(4) (1997) 353-376.
9
[10] K.G. Garg, C. Ramesh, S. Chandra, Z. Ahmad, Performance of instrumented wall retaining reinforced earth fill, Indian Geotechnical Journal, 32(4) (2002) 364-381.
10
[11] S. Mittal, K.G. Garg, S. Saran, Analysis and design of retaining wall having reinforced cohesive frictional backfill, Geotechnical and Geological Engineering, 24(3) (2006) 499-522.
11
[12] A.L. Shinde, J.N. Mandal, Behavior of reinforced soil retaining wall with limited fill zone parameter, Geotechnical and Geological Engineering, 25 (2007) 657-672.
12
[13] R. L. Michalowski, A. G. Zhao, Failure of fiber-reinforced granular soils. J.of Geotech. Engrg.ASCE, 122(3) (1996) 226-234.
13
[14] M.I.M. Pinto, Model Studies of Fabric-Reinforced Brick- Faced Earth-Retaining Walls, Ph.D. Thesis, University of Leeds, Leeds, United Kingdom,(1992). 316-317
14
[15] M. H. Maher, D. H. Gray, Static response of sands reinforced with randomly distributed fibers, Jornal of Geotech Eng.ASCE,116(.11) (1990) 1661-1677.
15
[16] H. C. Benson, M. V. Khire, Reinforced sand with strips of reclaimed highdensity polyethylene, J.of Geotech. Engrg. ASCE, 120(5) (1994). 838-855.
16
[17] , R. L. Santoni, J. S. Tingle, S. L. Webster, Engineering properties of sandfber mixtures for road construction, J. of Geotech. And Geoenviron. Engrg.ASCE, 127(3) (2001) 258-268.
17
[18] A. Sawicki, D. Lesniewska, Failure Modes and Bearing Capacity of Reinforced Soil Retaining Walls, Geotextiles and Geomembranes, 5 (1987) 29-44.
18
[19] E. Palmeira, D. Lanz, Stresses and Deformations in Geotextile Reinforced Model Walls, Geotextiles and Geomembranes, 13 (1994) 331-348.
19
[20] R. Karpurapu, R. Bathurst, BEHAVIOUR OF GEOSYNTHETIC REINFORCED SOIL RETAINING WALLS USING THE FINITE ELEMENT METHOD, Computers and Geotechnics, 17 (1995) 279-299.
20
[21] C. Yoo, Laboratory investigation of bearing capacity behavior of strip footing on geogrid reinforced sand slope,. Geotextiles and Geomembranes, 19 (2001) 279–298.
21
[22] A. Shinde, J. Mandal, Behavior of Reinforced Soil Retaining Wall With Limited Fill Zone, Geotech Geol Eng, 25 (2007). 657–672.
22
[23] G. Yang, B. Zhang, P. Lv, Q. Zhou, Behaviour of geogrid reinforced soil retaining wall with concrete-rigid facing, Geotextiles and Geomembranes, 27 (2009) 350–356.
23
[24] B. Das, Principles of Foundation Engineering, Boston: Kent publishing company,1984
24
[25] M.A. Aghdami, M. Alilouei Bonab, K. Badv, investigation of geometric parameters of reinforcing materials on bearing capacity and stability of retaining walls, 5th national congress on civil engineering, Mashhad, Iran, 2010, (In Persion)
25
ORIGINAL_ARTICLE
طراحی مدل انتظارات ذینفعان کلیدی در پروژههای احداث خطوط مترو: مورد مطالعه پروژه ساخت خطوط قطار شهری مشهد
از آن جایی که پروژههای بزرگ دارای ذینفعان مختلفی میباشند، شناخت کافی از آنها و انتظاراتشان یکی از عوامل مؤثر بر موفقیت پروژه خواهد بود؛ زیرا کسب رضایت ذینفعان پروژه بدون شناخت و در نتیجه پاسخ مناسب به انتظارات آنها غیرممکن خواهد بود. مدل انتظارات ذینفعان کلیدی در پروژههای احداث خطوط مترو میتواند به عنوان یک ابزار مناسب جهت برقراری ارتباط مناسب با ذینفعان پروژه در اختیار مدیران این نوع از پروژهها قرار گیرد تا مشارکت ذینفعان در تمام حیات پروژه تضمین گردد. هدف پژوهش دستیابی به مدل انتظارات ذینفعان کلیدی بود که در یک سوی آن انواع ذینفعان کلیدی و در سوی دیگر انتظارات ذینفع قرار گرفته باشد. الگوی مورد استفاده در این پژوهش برگرفته از روش گسترش عملکرد کیفیت (QFD) است که با حرکت از از ماتریس انتظار- ذینفع و طی چهار مرحله، ماتریس اهمیت- نوع ذینفع حاصل شده است که بیان میکند بین نوع ذینفعان با انتظارات چه رابطهای را میتوان توضیح داد. برای بررسی نوع ذینفع از مدل میشل استفاده شد که ذینفعان را در 7 نوع تقسیم بندی کرده است. جهت طراحی این مدل، پروژه احداث خطوط قطار شهری مشهد مورد مطالعه قرار گرفته است. با توجه به مدل نهایی، ذینفعان قطعی دارای بیشترین سطوح انتظارات بوده و ذینفعان مسلط از حداقل انتظارات برخوردارند. هم چنین مدل نهایی نشان میدهد که سه نوع ذینفع ساکت، محتاط و متقاضی در هیچ شرایطی جزو ذینفعان کلیدی پروژه نمیباشند.
https://ceej.aut.ac.ir/article_881_3f8b902979deac53bcb1de5482013de1.pdf
2018-04-21
227
242
10.22060/ceej.2016.11531.5030
مدل
انتظارات
ذینفعان
پروژه
مترو
امیر
بهادرستانی
amir.bahador.1990@gmail.com
1
دانشکده مهندسی عمران، دانشگاه فردوسی مشهد، خراسان رضوی، ایران
AUTHOR
منصور
قلعه نوی
ghalehnovi@um.ac.ir
2
دانشکده مهندسی عمران، دانشگاه فردوسی مشهد، خراسان رضوی، ایران
LEAD_AUTHOR
ناصر
مطهری فریمانی
n.motahari@um.ac.ir
3
دانشکده مهندسی عمران، دانشگاه فردوسی مشهد، خراسان رضوی، ایران
AUTHOR
[1] M.H. Sebt, M. Mokhtariani, A Comprehensive Cluster Map for Construction Cluster, Amirkabir J. Civil Eng., 46(1) (2014) 91-96. [In Persian]
1
[2] C. Preece, H.Y. Chong, H. Golizadeh, J. Rogers, A review of customer relationship (CRM) implications: benefits and challenges in construction organizations, International Journal of Civil Engineering, 13(3) (2015) 362-371.
2
[3] J.F. Preble, Toward a comprehensive model of stakeholder management, Business and Society Review, 110(4) (2005) 407-431.
3
[4] E. Shahvand, M.H. Sebt, M.T. Banki, Supply Chain Management Improvement through Value Engineering Approach in the Construction Industry, Amirkabir J. Civil Eng., 45(2) (2013) 31-40. [In Persian]
4
[5] A Guide to the Project Management Body of Knowledge (PMBOK Guide), Project Management Institute (PMI), (2013) 5, 6, 40,400-410).
5
[6] Freeman, R. E., Strategic management: A stakeholder perspective. Boston: Pitman, (1984).
6
[7] T. Donaldson, L.E. Preston, The stakeholder theory of the corporation: Concepts, evidence, and implications, Academy of management Review, 20(1) (1995) 65-91.
7
[8] Office of Government Commerce, Managing successful projects with PRINCE2. The Stationery Office (2009).
8
[9] M. Morsing, M. Schultz, Corporate social responsibility communication: stakeholder information, response and involvement strategies, Business Ethics: A European Review, 15(4) (2006) 323-338.
9
[10] J.S. Sutterfield, S.S. Friday-Stroud, S.L. Shivers-Blackwell, A case study of project and stakeholder management failures: lessons learned, Project Management Quarterly, 37(5) (2006) 26.
10
[11] A. Masoudifar, Project Stakeholder Management, Project Management Quarterly, 6(17) (2011). [In Persian]
11
[12] R. Brugha, Z. Varvasovszky, Stakeholder analysis: a review, Health policy and planning, 15(3) (2000) 239-246.
12
[13] M. Bastehnegar, Methodologies for stakeholder analysis in qualitative research, 1st National Business Management Conference, (2013). [In Persian]
13
[14] R.K. Mitchell, B.R. Agle, D.J. Wood, Toward a theory of stakeholder identification and salience: Defining the principle of who and what really counts, Academy of management review, 22(4) (1997) 853-886.
14
[15] C. Eden, F. Ackermann, Strategy making: The journey of strategic management, Sage, J Oper Res Soc, 57 (1998).
15
[16] F. Hojaji, Stakeholder circle methodology And application of practical model for stakeholder management in municipal outsourcing projects, The 5th International Project Management Conference, Tehran, (2009). [In Persian]
16
[17] L. Bourne, Project relationships and the stakeholder circle, in: PMI Research Conference. Montreal Canada, PMI, (2006).
17
[18] M. Rahimi, A. Najafi, Identifying and Prioritizing Customers' Expectations Using Fuzzy ANP Technique- Case Study: Zanjan Municipality, 1st International Management Conference, Tehran, (2014). [In Persian]
18
[19] J. Von Meding, K. McAllister, L. Oyedele, K. Kelly, A framework for stakeholder management and corporate culture, Built Environment Project and Asset Management, 3(1) (2013) 24-41.
19
[20] Y. Akao, QFD: Past, present, and future International Symposium on QFD.’97 Linköping, 97(2) (1997) 1-12.
20
[21] M. Hussain, L. Tsironis, M.M. Ajmal, A QFD strategy for improving customer satisfaction: case study of telecom companies of Pakistan, Asian Journal on Quality, 12(3) (2011) 282-295.
21
[22] I. Dikmen, M.T. Birgonul, S. Kiziltas, Strategic use of quality function deployment (QFD) in the construction industry, Building and environment, 40(2) (2005) 245-255.
22
[23] M.E. Clarkson, A stakeholder framework for analyzing and evaluating corporate social performance, Academy of management review, 20(1) (1995) 92-117.
23
[24] L. Becchetti, R. Ciciretti, Corporate social responsibility and stock market performance, Applied financial econ omics, 19(16) (2009) 1283-1293.
24
[25] K. Mellahi, G. Wood, The role and potential of stakeholders in “hollow participation”: Conventional stakeholder theory and institutionalist alternatives, Business and society review, 108(2) (2003) 183-202.
25
[26] K.Y. Mok, G.Q. Shen, J. Yang, Stakeholder management studies in mega construction projects: A review and future directions, International Journal of Project Management, 33(2) (2015) 446-457.
26