%0 Journal Article
%T A Modification to ACI 440.1R-06 Equation for Determining the Bond Strength of GFRP Bars Using Reliability Analysis
%J Amirkabir Journal of Civil Engineering
%I Amirkabir University of Technology
%Z 2588-297X
%A Rakhshani Mehr, Mehrallh
%A Esfahani, Mohammad reza
%A Mousavi, Seyes rohollah
%D 2013
%\ 12/22/2013
%V 45
%N 2
%P 73-82
%! A Modification to ACI 440.1R-06 Equation for Determining the Bond Strength of GFRP Bars Using Reliability Analysis
%K FRP Bars
%K Transverse Reinforcement
%K Reliability Analysis
%K Monte Carlo Method
%K Bond Strength
%R 10.22060/ceej.2013.312
%X ACI 440.1R-06 Code overestimates the bond strength of lap-spliced FRP reinforced concrete beams. In this code, the effect of transverse reinforcement along the splice length on bond strength is not taken into account. In this paper, ACI 440.1R-06 equation was modified for calculating the bond strength of spliced bars in specimens without transverse reinforcement along the splice length using reliability analysis and experimental results. Then, 13 beam specimens were manufactured and tested for evaluating the effect of transverse reinforcement on bond strength. Experimental results show that the influence of transverse reinforcement depends on surface geometries of FRP bars. In this study, the bond strength produced by transverse reinforcement is formulated as a function of surface geometries of bars. This equation is obtained by means of experimental results and Monte Carlo simulation. The bond strength calculated by the proposed equations correlates well with the experimental results in comparison with the values predicted by the code provisions.
%U https://ceej.aut.ac.ir/article_312_f6ba281c985757a877a6206fd6e7bd05.pdf