@article { author = {Nicknam, A. and Mazarei, A. and Ganjvar, M.}, title = {Assessment of Iran Seismic Design Response Spectra (Standard No. 2800) Regarding Site-Distance Effects Particularly at near Fault Sites}, journal = {Amirkabir Journal of Civil Engineering}, volume = {49}, number = {3}, pages = {547-564}, year = {2017}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2016.862}, abstract = {This article intends to investigate the effects of site-to-fault distance on the earthquake intensity measure (basic design acceleration, A, and response spectra, Sa) where is not taken into account in Iran standard No. 2800. Regarding that the relation between site-to-fault distance and the design-base acceleration (A) parameter (or Sa) in currently used attenuation relations is highly non-linear, thus assigning the same value of such parameters to different site-distances in big cities, particularly at near fault sites, seems to be quite challengeable. In order to make this problem clear, forty series of site specific seismic hazard analysis in the two cities, Ahwaz and Kerman, are performed over ten sites having four different site-soil conditions and the “A” parameters are calculated and discussed. The results of this study showed that the site-to-fault distance can significantly influence upon the site’s intensity measure (A) parameter (about several times as distance become smaller) and have significant differences with those of the Standard No. 2800. This problem also highly affects the effectiveness of “N” parameter presented in thee 2800 standard as the representative of near fault directivity parameter.}, keywords = {Site Specific Seismic HazardAnalysis,Basic Design Acceleration,Maximum Constant Acceleration Period Range,Design Response Spectra,Near Fault Earthquake}, title_fa = {ارزیابی طیف های طراحی ایران (استاندارد 2800) به لحاظ عدم رعایت اثرات فاصله ساختگاه به گسل به ویژه در حوزه نزدیک}, abstract_fa = {این نوشتار بر آنست که اثرات فاصله ساختگاه تا گسل در سنجه شدت زلزله (شتاب مبنای طرح A و یا شتاب طیفی) را که در استاندارد 2800 رعایت نشده مورد بررسی و ارزیابی قرار دهد. چون در روابط کاهندگی رابطه فاصله با سنجه شدت زلزله به صورت لگاریتمی و بسیار غیر خطی است. ارائه شتاب مبنای طرح یکسان برای فواصل کاملا مختلف در شهرهای بزرگ بویژه برای حوزه نزدیک کاملا چالش برانگیز است. برای نشان دادن این نکته چهل سری تحلیل خطر ویژه ساختگاهی در دو شهر اهواز و کرمان انجام و نتایج آن به صورت شتاب مبنای طرح و طیف طراحی در ده ایستگاه در حوزه دور و نزدیک روی چهار نوع خاک انجام و مورد ارزیابی قرار داده شده است. نتایج این مطالعه نشان میدهد که اختلاف پارامتر A در ساختگاههای مختلف می تواند تا چند برابر و با مقادیر نظیر استانداردهای سوم و چهارم اختلاف داشته باشد. این نکته روی اعمال اثرات جهت داری زلزله که با پارامتر N در استاندارد 2800 انجام می گیرد نیز تاثیر قابل ملاحظه ای دارد. به نظر می رسد ضروری است در این مورد اقدامات اساسی انجام گیرد.}, keywords_fa = {Site Specific Seismic HazardAnalysis,Basic Design Acceleration,Maximum Constant Acceleration Period Range,Design Response Spectra,Near Fault Earthquake}, url = {https://ceej.aut.ac.ir/article_862.html}, eprint = {https://ceej.aut.ac.ir/article_862_2075393b65656e6824be9f3e370b9dd2.pdf} }