@article { author = {Kavousi, Maryam and Keshavarz Alamdari, Eskandar and Firoozi, Sadegh}, title = {Selective Recovery of Copper from Lead and Tin by Solvent Extraction of Method}, journal = {Amirkabir Journal of Civil Engineering}, volume = {49}, number = {3}, pages = {577-580}, year = {2017}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2016.618}, abstract = {High electrical conductivity of metals such as gold, silver and platinum extensively increased the use of these metals in electronics. In addition to the platinum group metals, large amounts of copper, tin and lead are present in E-Waste. For an effective recovery of precious metals, and also from an economic perspective, it is essential to recover the mentioned metals. In this paper, separation of copper from tin and lead by solvent extraction was studied. Fluoroboric acid and LIX984N was used as leachant and organic solvent, respectively. Effective factors such as the concentration of organic solvent, pH, temperature and concentration of copper on the extraction of copper were investigated. The treatment of leach liquor for solvent extraction of copper with LIX984N showed that 20% LIX984N in kerosene, a 30 min period of equilibrium, and a pH of 3 were sufficient for the extraction of Cu(II) and 99.99% copper can be recovered from the leached solution.}, keywords = {Electronic waste,Solvent extraction,LIX984N,Fluoroboric acid,Recovery}, title_fa = {جدایش انتخابی مس از سرب و قلع به روش استخراج حلالی}, abstract_fa = {خاصیت هدایت الکتریکی بالای فلزاتی نظیر طلا، نقره و پلاتین باعث شده است تا کاربرد این فلزات در تجهیزات الکترونیکی به صورت بسیار گسترده‌ای افزایش یابد. علاوه براین فلزات، مقدار قابل توجهی مس، قلع وسرب به‌عنوان اتصالات وفیکس‌کننده قطعات الکترونیکی برروی برد استفاده شده است. پیشرفت تکنولوژی سبب ایجاد حجم زیادی پسماند الکترونیکی در جهان می‌شود. باتوجه به تناژ این ضایعات و درصد بالای مس و آلیاژ لحیم موجود در آن، بازیابی این فلزات از دیدگاه اقتصادی و به عنوان پیشنیاز جهت حذف فلزات گرانبها اهمیت دارد. در این مقاله، جداسازی مس از قلع و سرب از محلول لیچینگ قراضه‌های الکترونیکی به روش استخراج حلالی بررسی شده است. اسید فلوئوروبوریک و LIX984N بترتیب بعنوان عامل لیچینگ و حلال آلی مورد استفاده قرار گرفته‌اند. تاثیر فاکتورهای مهم مانند درصد فاز آلی، pH و دما مطالعه شده و نتایج آن آورده شده است. نتایج نشان می‌دهد که با فراهم آوردن شرایطی مناسب توسط استخراج‌کنندهLIX984N 20% حجمی و pH تعادلی 3 امکان بازیابی گزینشی 99/99% مس از محلول لیچینگ اسیدفلوئوروبوریک این پسماندها فراهم کرد.}, keywords_fa = {Electronic waste,Solvent extraction,LIX984N,Fluoroboric acid,Recovery}, url = {https://ceej.aut.ac.ir/article_618.html}, eprint = {https://ceej.aut.ac.ir/article_618_4719f017bc71b73c6ed44ba2cd7aaf1b.pdf} }