@article { author = {Ramezanianpor, Aliakbar and Yadak Yaraghi, Amirhossein and Zolfagharnasab, Arash and Ramezanianpour, Amir mohammad}, title = {INVESTIGATION OF MECHANICAL PROPERTIES AND CHLORIDE IONS INGRESS IN CONCRETES CONTAINING CALCINED}, journal = {Amirkabir Journal of Civil Engineering}, volume = {54}, number = {3}, pages = {1119-1132}, year = {2022}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2021.19247.7117}, abstract = {Portland cement production is known as an environmental pollutant and high energy-consuming industry. One way to reduce cement production and consumption is to use supplementary cementitious materials. Pozzolans are widely used as supplementary cementing materials (SCMs) nowadays. Due to the widespread use of Portland cement in the construction industry, partial replacement of PC with SCMs such as calcined clays can reduce the harmful environmental impacts of cement production and enhance the durability of concrete structures and increase service life. In this study, the mechanical properties and durability of OPC and concretes containing Calcined Clays (CCs) and Limestone powder (LS) have been compared. In this research, the effect of using calcined clays (CC) and limestone powder (LS) as SCMs on the mechanical properties and durability of concrete was investigated. Six concrete mixtures have been prepared by replacing 30% of PC by 3 different CCs and LS as binary and ternary blended mixtures (LC3 mixtures). Mechanical properties, permeability and durability of concrete mixtures containing different CCs have been investigated by means of compressive strength, water absorption, electrical resistivity and rapid chloride migration test (RCMT). According to the results, although using binary and ternary blended mixtures have reduced the compressive strength compared with the control mixture, but the permeability and durability of mixtures have been significantly improved.}, keywords = {Calcined Clay,Limestone Powder,Durability of Concrete,Mechanical Properties,Chloride ions}, title_fa = {بررسی مشخصات مکانیکی و نفوذپذیری یون‌های کلراید در بتن‌های حاوی رس کلسینه شده}, abstract_fa = {    تولید سیمان به عنوان یک فرآیند صنعتی آلاینده محیط زیست و پرمصرف در زمینه انرژی شناخته می‌شود. یکی از راه­های کاهش تولید و مصرف سیمان استفاده از مواد جایگزین سیمان در بتن می‌باشد. امروزه از پوزولان­ ها به عنوان مواد جایگزین سیمان استفاده می‌شود. با توجه به استفاده بسیار زیاد در صنعت از سیمان پرتلند، جایگزینی بخشی از آن توسط افزودنی‌های معدنی نظیر رس ­های کلسینه شده نه تنها سبب کاهش اثرات منفی تولید سیمان شده بلکه با افزایش دوام سازه­ های بتنی همراه خواهد بود. در این پژوهش به منظور مقایسه مشخصات مکانیکی و دوام بتن­های ساخته شده با رس کلسینه و پودر سنگ آهک با طرح شاهد، 7 طرح مخلوط بتن شامل 3 طرح مخلوط با جایگزینی رس ­های کلسینه با مقادیر مختلف کائولینیت به جای سیمان (به صورت دو جزئی) و 3 طرح مخلوط با جایگزینی رس­های کلسینه و پودر سنگ آهک به‌ جای سیمان (به صورت 3 جزئی) و 1 طرح شاهد، به ‌عنوان طرح‎‌های مورد استفاده انتخاب شده و جهت بررسی ویژگی‌های مکانیکی و دوامی آن‌ها آزمایشات تعیین مقاومت فشاری، مقاومت الکتریکی سطحی، جذب آب حجمی و مهاجرت تسریع شده یون­ های کلراید در سنین مختلف صورت پذیرفته است. بر اساس نتایج، استفاده از مواد جایگزین سیمان (به صورت دو جزئی و سه جزئی) موجب کاهش مقاومت فشاری شده است. اما نتایج آزمایشات دوامی شامل مقاومت الکتریکی سطحی، جذب آب حجمی و مهاجرت تسریع شده یون­های کلراید حاکی از آن است که استفاده از رس ‌کلسینه به صورت دو جزئی و سه جزئی باعث افزایش دوام نمونه­ های بتنی تحت شرایط حمله کلرایدی و نیز کاهش نفوذپذیری می‎‏شود.}, keywords_fa = {رس کلسینه شده,پودر سنگ آهک,دوام بتن,مشخصات مکانیکی,یون‌های کلراید}, url = {https://ceej.aut.ac.ir/article_4524.html}, eprint = {https://ceej.aut.ac.ir/article_4524_6b6949a87894f77e8d0d0f77520fac5d.pdf} }