@article { author = {zahed aqae, Mohsen and Parvizi, Mansour and Sirouspour, Somayeh}, title = {Design and Numerical Modeling of Light Compactor for Very Low Energy Dynamic Compaction by Finite Element Method}, journal = {Amirkabir Journal of Civil Engineering}, volume = {54}, number = {5}, pages = {1857-1884}, year = {2022}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2021.19978.7305}, abstract = {The purpose of this study is to find a method for obtaining all soil dynamic parameters numerically. Moreover, it is intended to predict the dynamic parameters after each impact and to obtain the predicted compaction as well as the desired dynamic parameters after a certain number of impacts. In the study, four hammers with different dimensions are modeled on sandy soil using ABAQUS. Additionally, the activated wave stiffness test is used to extract the dynamic parameters of each hammer for loose sand, and it is shown that which hammer under what conditions yields the highest efficiency. The peak particle velocity is obtained using the finite element technique for each hammer, and the results are used to determine the safe distance after each blow. The results indicate that the unsafe distance of the compactor from the location of impact increases with the weight of the compactor. In the study, a hammer with a mass of 875 kg, falling through a distance of 1 m. A safe horizontal distance of 3.80 m, and a safe vertical distance of 2.30 m are designed to deliver five blows to achieve the maximum stiffness with an improved depth under the foundation from 0.9 to 1.2 m in loose soil and a relative error of 5% is obtained. The improvement depth obtained numerically is in good agreement with the experimental results of centrifuge tests at accelerations of 1, 10, 20, and 30 g, as well as the field results of Parvizi and Merrifield, Allen, Maxwell and Briaud.  }, keywords = {soil compaction,compactor,activated wave stiffness test,unsafe distance,improved depth}, title_fa = {طراحی و مدل‌سازی عددی دستگاه ضربه‌زن سبک برای تراکم دینامیکی با انرژی کم به روش اجزاء محدود}, abstract_fa = {هدف این پژوهش، به دست آوردن روشی است که تمام پارامترهای دینامیکی به راحتی و با روش‌های عددی به ‌دست آورد و همچنین بتوان پس از اعمال هر ضربه، پارامترهای دینامیکی خاک را پیش‌بینی و با رسیدن به تعداد ضربه پیش‌بینی شده عملیات تراکم پایان پذیرد و مقدار مطلوب پارامتر دینامیکی مورد نظر هم تأمین شده باشد. در پژوهش حاضر، 4 نوع دستگاه ضربه‌زن با ابعاد متفاوت روی خاک ماسه‌ای با استفاده از نرم‌افزار آباکوس مدل‌سازی و با استفاده از روش سختی موج فعال شده پارامترهای دینامیکی مربوط به هر دستگاه برای ماسه سست استخراج شده و معلوم می‌گردد کدام دستگاه در چه موقعیتی دارای بیشترین بازده می ­باشد. با به دست آوردن حداکثر سرعت ذره با استفاده از نرم‌افزار اجزاء محدود در هر یک از دستگاه‌های ضربه‌زن، فاصله ایمن برای هر دستگاه به ازای هر ضربه به ‌دست آمد. نتایج حاکی از آن است که فاصله غیر ایمن دستگاه ضربه‌زن از محل اصابت ضربه با افزایش وزن ضربه‌زن افزایش یافته است. در این تحقیق دستگاه ضربه‌زن سبک با مشخصات وزن کوبه 875 کیلوگرم، ارتفاع سقوط 1متر، فاصله غیر ایمن افقی 3/80 متر، فاصله غیر ایمن عمودی2/30 متر، تعداد ضربه مورد نیاز برای رسیدن به بیشینه‌ی سختی 5 ضربه و عمق بهبود یافته زیر پی 0/9 الی 1/2 متر بر روی خاک سست طراحی و مقدار خطای نسبی 5 درصد محاسبه شده است. عمق بهبود به دست آمده با استفاده از روش عددی با نتایج سانتریفیوژ در شتاب‌های 1g، 10g، 20g، 30g و نتایج صحرایی پرویزی و مریفاید، آلن، ماکسول و بریاد همخوانی دارد.}, keywords_fa = {تراکم خاک,دستگاه ضربه‌زن,روش سختی موج فعال شده,فاصله غیر ایمن,عمق بهبود}, url = {https://ceej.aut.ac.ir/article_4523.html}, eprint = {https://ceej.aut.ac.ir/article_4523_6df7223556c1a8d6bf53744ea4bc1037.pdf} }