@article { author = {Saberi, Vahid and Saberi, Hamid and Salimikia, Masoud and Sadeghi, Abbasali}, title = {Investigation the cyclic behavior of rigid RBS connections with horizontal and vertical stiffeners in steel moment- resisting frame}, journal = {Amirkabir Journal of Civil Engineering}, volume = {54}, number = {4}, pages = {1273-1310}, year = {2022}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2021.19405.7160}, abstract = {In this study, RBS connections behavior reinforced by horizontal and vertical stiffeners is assessed under cyclic loading and the effect of stiffeners is studied in order to improve the cyclic behavior of connections. The Finite Element ABAQUS software has been used to verify and simulate reduced beam section (RBS) connection behavior. Parametric studies have been conducted by changing the stiffeners number, material and arrangement in the connection area. The finite element analysis results showed that when using a combination of two horizontal and two vertical stiffeners, the initial and ultimate strength of the connection have increased by 6.2% and 26.1%, respectively, compared to that of the connections without stiffeners. When using horizontal and vertical stiffeners in a rectangular arrangement with a length equals to 75% of the section reduction area length and its height equals to 75% of beam height, the initial and ultimate strength of the connection has been increased by 6% and 20%, respectively in comparison the state without stiffeners. By comparing the use of ST37 and ST52 in stiffeners, it has been observed that both used steels have the same effect on the connection strength. Meanwhile, the effect of steel material of stiffeners could be ignored in improving the connection strength.}, keywords = {Reduced Beam Section (RBS) Connection,Cyclic loading,Horizontal Stiffener,Vertical Stiffener,ABAQUS Software}, title_fa = {بررسی عملکرد اتصالات صلب تیر با مقطع کاهش یافته با سخت کننده‌های افقی و قائم در قاب خمشی فولادی}, abstract_fa = {در این تحقیق، رفتار اتصالات تیر با مقطع کاهش یافته (RBS) تقویت شده با استفاده از سخت کننده ­های افقی و قائم تحت بارگذاری چرخه ­ای مورد بررسی قرار گرفته و تأثیر سخت کننده­ ها بر بهبود رفتار چرخه ­ای اتصالات مطالعه گردیده است. از نرم افزار اجزا محدودی ABAQUS جهت صحت‌سنجی و شبیه­ سازی رفتار اتصال RBS استفاده شده است. مطالعه ­ی پارامتری با تغییر جنس و نحوه­ ی آرایش سخت ­کننده ­ها در محل اتصال انجام شد. نتایج تحلیل­ های اجزا محدودی انجام شده نشان داد که در حالت استفاده از ترکیب دو سخت ­کننده­ ی افقی و دو سخت کننده ­ی قائم، مقاومت اولیه و نهایی اتصال در مقایسه با اتصال بدون سخت کننده به ترتیب 6/2 و 26/1 درصد افزایش یافته است. در حالت استفاده از سخت کننده ­های افقی و قائم با پیکربندی مستطیلی، با طول برابر با 75 درصد طول ناحیه­ ی کاهش مقطع و ارتفاع برابر با 75 درصد ارتفاع تیر، مقاومت اولیه و نهایی اتصال در مقایسه با حالت بدون تقویت به ترتیب حدود 6 و 20 درصد افزایش یافته است. با مقایسه استفاده از فولاد­های ST37 و ST52 در سخت کننده­ ها، مشاهده گردید که هر دو حالت دارای تأثیر یکسانی در افزایش مقاومت اتصال بوده ­اند و می­ توان از تأثیر جنس فولاد سخت کننده ­ها در افزایش مقاومت اتصال صرف نظر کرد.}, keywords_fa = {Reduced Beam Section (RBS) Connection,Cyclic loading,Horizontal Stiffener,Vertical Stiffener,ABAQUS Software}, url = {https://ceej.aut.ac.ir/article_4474.html}, eprint = {https://ceej.aut.ac.ir/article_4474_9ebf8d44e4ca8c501a970992bb867df7.pdf} }