@article { author = {Mahigir, Ali and Ardakani, Alireza and Hassanlou Rad, Mahmood}, title = {Comparison between the Interface Interaction of Sand and Clayey Sand with PET Geogrid in Pullout Test Based on Active Length}, journal = {Amirkabir Journal of Civil Engineering}, volume = {54}, number = {1}, pages = {95-112}, year = {2022}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2021.18191.6800}, abstract = {Large pullout test is used to investigate the geogrid pullout behavior in the anchorage zone. When the pullout load is applied to the geogrid, this force is gradually transmitted along with the sample until it reaches the end of the geogrid. In order to more accurately investigate the soil-geogrid interaction mechanism, the pullout behavior of geogrid should be evaluated based on the active length. In this study, by performing a series of large-scale pullout tests, the distribution of shear stress and pullout interaction coefficient of a PET geogrid embedded in clean sand and 20% clayey sand were investigated based on active length. The results showed that the value of the pullout force to start the movement of the last geogrid transverse member increased with increasing vertical effective stress in both geogrid embedded in two soil. In all pullout tests, minimum active interaction coefficient was obtained at the conversion of transfer force stage to pullout stage.}, keywords = {Pullout test,Geogrid,Clean sand,clayey sand,pullout interaction coefficient}, title_fa = {مقایسه اندرکنش سطح تماس ماسه‎ و ماسه رس‌دار با ژئوگرید PET در آزمایش بیرون‌کشیدگی بر مبنای طول موثر}, abstract_fa = {آزمایش بیرون‌کشیدگی بزرگ مقیاس برای بررسی رفتار بیرون‎‌کشیدگی ژئوگرید در ناحیه مهاربندی شده مورد استفاده قرار می‎‌گیرد. هنگامی‎ که نیروی بیرون‎‌کشیدگی به ژئوگرید اعمال می‎‌گردد، این نیرو به تدریج در طول نمونه پیش می‌‎رود تا اینکه به انتهای نمونه برسد. به قسمتی از طول ژئوگرید که با فعال شدن مکانیرم اندرکنشی در آن، در برابر نیروی بیرون‎‌کشیدگی مقاومت می‌کند، طول موثر گفته می‌شود. جهت بررسی دقیق‎‌تر اندرکنش سطح تماس خاک و ژئوگرید، می‌بایست رفتار بیرون‎‌کشیدگی ژئوگرید بر مبنای طول موثر مورد ارزیابی قرار گیرد. در این مطالعه با انجام یک ‎سری آزمایش بیرون‌‎کشیدگی بزرگ مقیاس، ضمن تخمین طول موثر ژئوگرید، به برسی نحوه توزیع تنش برشی، ضریب اندرکنش بیرون‎‌کشیدگی، کرنش طولی سطح تماس دو نوع ژئوگرید تک ‌سویه PET با ساختار هندسی یکسان و سختی متفاوت، مدفون در دو نوع خاک ماسه‌‎ای و ماسه حاوی 20% رس تحت اثر تنش‎‌های قائم موثر مختلف و بر مبنای طول موثر پرداخته شد. نتایج نشان داد مقدار نیروی بیرون‎ کشیدگی جهت شروع حرکت آخرین نوار عرضی ژئوگرید با افزایش تنش قائم موثر در هر دو نمونه ژئوگرید و هر دو نمونه خاک افزایش پیدا کرد. همچنین، کرنش موثر در هر دو مرحله انتقال نیرو و بیرون‎کشیدگی در ژئوگرید سخت‌تر مدفون در ماسه و ماسه رس‌دار نسبت به ژئوگرید شکل‌پذیرتر، کمتر بود. در مقادیر کم جابجایی‌‎های جلویی، افزایش سختی ژئوگرید موجب کاهش تنش برشی موثر در خاک ماسه‌‎ای و خاک ماسه رس‌دار می‎‌گردد. در تمامی آزمایش‎‌های بیرون‎ کشیدگی ضریب اندرکنش بیرون‎‌کشیدگی موثر در نقطه تبدیل مرحله انتقال نیرو به مرحله بیرون‎‌‎کشیدگی حداقل مقدار را داشت.}, keywords_fa = {طول موثر,تنش برشی,ضریب اندرکنش بیرون‎کشیدگی,مقاومت بیرون‎کشیدگی,ماسه رس‎دار}, url = {https://ceej.aut.ac.ir/article_4427.html}, eprint = {https://ceej.aut.ac.ir/article_4427_dec678ff65abaa2f1aee4eee74076874.pdf} }