@article { author = {mohammadi, firouz and hassanzadeh, yousef and roushangar, kiyoumars}, title = {Experimental and Numerical Investigation on Discharge Coefficient Relationships sharp-crested U Shape Plan Form Weirs}, journal = {Amirkabir Journal of Civil Engineering}, volume = {53}, number = {10}, pages = {4231-4252}, year = {2021}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2020.18289.6819}, abstract = {      In this research, the relationships of the discharge coefficient of the sharp-crested U shape plan form labyrinth weirs (one cycle) have been investigated experimentally and numerically. Also, from 3 groups of weirs with heights of 10, 12.5, and 15 cm and at each height, the length of different arches to the values of 40.82, 45 and 48.10 cm have been tested. The main purpose of the present study is to determine the overflow discharge from the weir by providing relationships for the discharge coefficient experimentally.  Dimensional analysis was used by 𝜋 Buckingham method to extract the relationship. Three-dimensional simulation of weirs was performed numerically with equations governing the finite volume method using FLOW-3D software, then compared with laboratory results.   The results of the present study show that the proposed relationship can predict discharge values with very high accuracy and an error of 4.79% in the ratio of the head-to-height weir of 0.1 to 1.2. As the length of the weirs arch increases, the flow interference increases, and the discharge efficiency decreases. Although with increasing the length of the weirs, the length of the crest increases, the weirs efficiency decreases, the maximum throughput efficiency decreases in this case, it is at 7.01%. With constant arc length and increase in weirs height, it was observed that the throughput efficiency decreases significantly, which shows a maximum volume of flow through the weirs of 4.82%.}, keywords = {Arch length,Discharge Coefficient,Height increase,Labyrinth weirs,Overflow efficiency}, title_fa = {بررسی آزمایشگاهی و عددی روابط ضریب دبی سرریزهای لبه‌تیز کنگره‌ای U شکل در پلان}, abstract_fa = {در این تحقیق، روابط ضریب دبی سرریزهای لبه­‌تیز کنگره­ای U شکل در پلان (تک سیکل) به صورت آزمایشگاهی و عددی بررسی شده است. همچنین از ۳ گروه سرریز به ارتفاع‌­های 10، 12/5 و 15 سانتی­‌متر و در هر ارتفاع، طول قوس‌­های متفاوت به مقادیر 40/82، 45 و 48/10 سانتی‌­متر آزمایش شده است. هدف اصلی تحقیق حاضر، تعیین دبی عبوری از روی سرریز با ارائه روابطی برای ضریب دبی به صورت آزمایشگاهی می‌­باشد. برای استخراج رابطه از آنالیز ابعادی به روش پی باکینگهام استفاده گردید. ضریب دبی به صورت بی ­بعد تابعی از نسبت طول قوس به عرض سرریز و نسبت هد روی سرریز به ارتفاع سرریز به دست آمد. شبیه­‌سازی سه­‌بعدی سرریزها به ­صورت عددی و با معادلات حاکم بر روش حجم محدود با استفاده از نرم‌­افزار FLOW-3D انجام گردید، سپس با نتایج آزمایشگاهی مورد مقایسه قرار گرفت. نتایج تحقیق حاضر نشان می‌­دهد که رابطه پیشنهادی قابلیت پیش‌­بینی مقادیر دبی را با دقت بسیار بالا و خطا 4/79 درصد در بازه نسبت هد به ارتفاع سرریز 0/1 تا 1/2 را دارا می‌­باشد. با افزایش طول قوس سرریزها، تداخل جریان افزایش و راندمان دبی کاهش می­‌یابد، با اینکه با افزایش یافتن طول قوس ­سرریزها طول تاج افزایش می‌­یابد راندمان آب‌گذری سرریز روند کاهشی می­‌گیرد، حداکثر کاهش راندمان آب‌گذری در این حالت 7/01 درصد می­‌باشد. با ثابت بودن طول قوس و افزایش در ارتفاع سرریزها مشاهده ­گردید که راندمان آب‌گذری به طور محسوس کاهش می­‌یابد که حداکثر حجم جریان عبوری از روی سرریز 4/82 درصد کاهش را نشان می‌­دهد.}, keywords_fa = {Arch length,Discharge Coefficient,Height increase,Labyrinth weirs,Overflow efficiency}, url = {https://ceej.aut.ac.ir/article_4117.html}, eprint = {https://ceej.aut.ac.ir/article_4117_885b4b874fec4d6799d92cb0105da39f.pdf} }