@article { author = {Ahmadi, Mohammad Hosein and ملاداودی, حامد}, title = {A Micromechanical Inelastic Strain-Damage Constitutive Model Based on Wing- and Secondary- Cracking Mechanisms under Dynamic Loading}, journal = {Amirkabir Journal of Civil Engineering}, volume = {53}, number = {7}, pages = {2735-2764}, year = {2021}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2020.17456.6568}, abstract = {For most rock materials, there exists a coupling between inelastic deformations caused by crack displacements on micro-crack faces and damage evolution due to nucleation and growth of wing- and secondary cracks. While rock material is subjected to dynamic loading, the interaction between micro-cracks plays an important role in materials behavior. The self-consistent homogenization scheme is implemented in this paper to consider micro-cracks interaction and determine the equivalent mechanical properties of micro-cracked rock deteriorated by damage evolution. This article aims to develop a self-consistent based micromechanical damage model by taking into account the wing- and secondary-cracking mechanisms accompanied by inelastic strains caused by crack displacements under dynamic compressive loading. While stress intensity factors in tensile and in-plane shear modes at flaw tips exceed the material fracture toughness in modes I and II, respectively, wing- and secondary cracks are sprouted and damage evolution occurs. For closed cracks, an appropriate criterion for the secondary-crack initiation is proposed in this paper. The developed model algorithm is programmed in the commercial finite difference software environment for numerical simulation of rock material to investigate the relationship between the macroscopic mechanical behavior and the microstructure. The fracture toughness parameters of the rock samples are experimentally determined. The rock microstructure parameters (average initial length and density of flaws) are studied using scanning electron microscopy. To verify the developed model, a series of numerical simulations are carried out to numerically reproduce the Split-Hopkinson pressure bar test results. The simulation results demonstrate that the developed micromechanical model can adequately reproduce many features of the rock behavior such as softening in the post-peak region, damage induced by wing- and secondary cracks, and irreversible deformations caused by crack displacements on micro-cracks.  Furthermore, the softening behavior of rock material in the post-peak region is affected by considering inelasticity and the secondary cracking mechanisms. Therefore, the rock sample simulation with the coupled inelastic-damage model can increase inelastic deformations in the post-peak region as a result of irreversible strains caused by crack displacements on micro-cracks. The simulation by considering the secondary-crack mechanism leads to an increase in the micro-cracking process, damage, and fragmentation in rock material.}, keywords = {Secondary crack,Stress intensity factor,inelastic strain,self-consistent,Sungun copper mine}, title_fa = {ارایه یک مدل رفتاری ریزمکانیکی کرنش غیرالاستیک-خرابی براساس سازوکار ترک بال و ترک ثانویه تحت بارگذاری دینامیکی}, abstract_fa = {در اغلب مواد سنگی تغییرشکل­‌های ناشی از جابه‌جایی در سطوح ریزترک اولیه و انتشار خرابی به دلیل جوانه‌­زنی و رشد ترک بال و ترک ثانویه به­‌گونه توأمان رخ می­‌دهد. وقتی مواد سنگی تحت بارگذاری دینامیکی قرار می­‌گیرند، اندرکنش بین ریزترک­‌ها نقش مهمی در رفتار مواد ایفا می­‌کند. در این تحقیق روش همگن‌­سازی خودسازگاری برای لحاظ اندرکنش بین ریزترک­‌ها و تعیین پارامترهای مؤثر مواد حاوی ریزترک که تحت تأثیر رشد خرابی زوال یافته‌­اند، بکار گرفته شده است. هدف از ارائه این تحقیق توسعه مدل خرابی ریزمکانیکی با در نظر گرفتن مکانیزم رشد ترک بال و ترک ثانویه در کنار کرنش­‌های غیرالاستیک ناشی از جابه‌جایی سطوح ریزترک اولیه تحت بارگذاری فشاری دینامیکی می‌­باشد. همچنین، معیار مناسبی برای شروع رشد ترک ثانویه برای ترک­‌های بسته پیشنهاد شده است. نمونه­‌های سنگی برای مطالعات آزمایشگاهی از تیپ سنگی سونگون پورفیری (SP) از مجتمع معدنی مس سونگون تهیه شده‌­اند. پارامترهای چقرمگی برای شکست مد اول برابر با 0/77 و برای چقرمگی شکست مد دوم برابر با  1/4 برای تیپ سنگی SP با استفاده از مطالعات آزمایشگاهی تعیین شدند. پارامترهای ریزساختاری سنگ (میانگین طول اولیه برابر با 96/5 میکرومتر و چگالی ریزترک­‌ها برابر با 108×5/46 در واحد سطح) با استفاده از اسکن میکروسکوپ الکترونی ارزیابی شدند. برای تعیین مقاومت فشاری دینامیکی، آزمایش فشاری هاپکینسون بر روی نمونه­‌های سنگی مکعبی­ شکل اجرا شد. مطابق با نتایج آزمایش هاپکینسون، افزایش نرخ کرنش تا حد  منجر به افزایش مقاومت فشاری دینامیکی تا مرز 350 مگاپاسکال نسبت به مقاومت فشاری استاتیکی 60 مگاپاسکالی می­‌شود. برای اعتبارسنجی مدل توسعه داده­ شده، نتایج حاصل از شبیه‌­سازی­‌های عددی با نتایج آزمایش میله فشاری هاپکینسون مقایسه شده است. نتایج حاصل از شبیه‌­سازی‌­های عددی به ازای نرخ کرنش یکسان تطابق خوبی با نتایج آزمایش میله فشاری هاپکینسون دارد. نتایج حاصل از شبیه­‌سازی­‌های عددی نشان می­‌دهد که مدل ریزمکانیکی توسعه داده شده بسیاری از ویژگی­‌های رفتاری سنگ‌­ها از جمله رفتار نرم­‌شوندگی در ناحیه بعد از مقاومت فشاری، خرابی حاصل از ترک‌­های بال و ترک‌­های ثانویه و تغییرشکل­‌های بازگشت ­ناپذیر ناشی از جابه‌جایی سطوح ریزترک‌­ها را پیش‌­بینی می­‌کند. قانون مقیاس برای تیپ سنگی SP با استفاده از نتایج شبیه­‌سازی‌­های عددی و مطالعات آزمایشگاهی مطالعه شد. مطابق با این قانون، نرخ کرنش انتقالی برابر 1200 و مقاومت فشاری دینامیکی برابر با 120 مگاپاسکال برآورد گردید. همچنین مطابق با نتایج شبیه­‌سازی­‌های عددی افزایش نرخ کرنش از  به  منجر به افزایش طول ترک بال در حدود 15 میکرومتر و طول ترک ثانویه در حدود 4 میکرومتر می‌­شود که این امر باعث افزایش اندرکنش بین ریزترک‌­ها می‌­شود.}, keywords_fa = {ترک ثانویه,رشد خرابی,فاکتور شدت تنش,کرنش غیرالاستیک,روش همگن‌سازی خودسازگار,معدن مس سونگون}, url = {https://ceej.aut.ac.ir/article_3952.html}, eprint = {https://ceej.aut.ac.ir/article_3952_20b46ec1773a8047ca9abf860b23cf00.pdf} }