@article { author = {Fahimi Farzam, Mazyar and Alinejad, Babak and mousavi gavgani, seyyed ali}, title = {Statistical Performance of Semi-Active Controlled 10-Storey linear Building using MR Damper under Earthquake Motions}, journal = {Amirkabir Journal of Civil Engineering}, volume = {53}, number = {4}, pages = {1571-1590}, year = {2021}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2020.17037.6437}, abstract = {Due to the advantages of semi-active control methods over passive and active methods, the development and performance of these methods to control the structural response under dynamic lateral loads has been widely considered. Magneto-Rheological (MR) Dampers are among the widely developed devices for semi-active control of buildings. Various models are proposed to simulate MR Dampers’ dynamic behavior. The present paper summarizes the results obtained through studying a 10-story linear shear building exposed to 28 far and near-fault earthquakes in MATLAB. A MR Damper with Clipped Optimal Control Algorithm was considered to control the vibrations of the structure. In addition to the effect of actuator saturation, the actuator’s dynamics were also considered using the Modified Bouc-Wen model. Moreover, the positioning the damper at three different configurations of lower, middle and upper stories were investigated. A statistical study was carried out under different types of near and far-fault records. Results obtained through this study suggested the best performance, in terms of minimizing the roof displacements, while placing a MR damper at the first floor. Results show that the investigated control system has the best performance under near-fault records without pulse, with an average reduction of 21% in the structural response.}, keywords = {Semi-Active Control,MR damper,Clipped optimal control algorithm,near-fault earthquake,Far-Fault Earthquake}, title_fa = {بررسی آماری عملکرد کنترل نیمه‌فعال مدل برشی ساختمان 10 طبقه خطی با میراگر سیال مغناطیسی تحت رکوردهای حوزه نزدیک و دور}, abstract_fa = {به دلیل مزایای روش‌های کنترل نیمه‌فعال نسبت به روش‌های غیرفعال و فعال، توسعه و بررسی عملکرد این روش‌ها در کنترل پاسخ سازه تحت بارهای جانبی دینامیکی به صورت گسترده‌ای مورد توجه قرار گرفته است. یکی از توسعه‌ یافته‌ترین ابزارهای کنترل نیمه‌فعال میراگر سیال مغناطیسی می‌باشد که مدل‌های مختلفی جهت شبیه‌سازی رفتار دینامیکی آن ارائه شده‌است. در این مقاله مدل خطی یک ساختمان ده طبقه برشی در محیط متلب تحت تحریک 28 رکورد زلزله حوزه‌ دور و نزدیک مورد بررسی قرار گرفته و به ‌منظور کنترل ارتعاش آن از میراگر سیال مغناطیسی همراه با الگوریتم کنترل قطع و وصل بهینه ولتاژ بهره برده شده‌است. در شبیه‌سازی انجام شده علاوه‌بر در نظر گرفتن اثر اشباع عملگر، دینامیک عملگر نیز با استفاده از مدل بوک- وِن اصلاح شده در نظر گرفته شده‌است. همچنین در این مطالعه اثر موقعیت قرارگیری این میراگر برای سه حالت مختلف (طبقات پایینی، میانی و بالایی) مورد بررسی قرار گرفته است. در ادامه با استفاده از نتایج بدست آمده از این الگوریتم، تحت انواع مختلف رکوردهای حوزه نزدیک و دور عملکرد آماری این کنترل‌کننده مورد بررسی قرار گرفته است. نتایج حاکی از آن است که قرارگیری میراگر سیال مغناطیسی در طبقه اول بهترین عملکرد را دارد. همچنین این سیستم کنترلی بهترین عملکرد را تحت رکوردهای حوزه نزدیک بدون ضربه دارا است و پاسخ سازه را تحت این مجموعه رکورد به مقدار متوسط 21 درصد کاهش می‌دهد.}, keywords_fa = {Semi-Active Control,MR damper,Clipped optimal control algorithm,near-fault earthquake,Far-Fault Earthquake}, url = {https://ceej.aut.ac.ir/article_3794.html}, eprint = {https://ceej.aut.ac.ir/article_3794_284c4dc4b7573016568269a45485a06b.pdf} }