@article { author = {Heidary, Parvaneh and Salmasi, Farzin and Arvanaghi, Hadi}, title = {Determination of Discharge Coefficient in Ogee Spillways and Investigation the Effects of Submergence, Upstream Slope and Apron Elevation on Its Variations}, journal = {Amirkabir Journal of Civil Engineering}, volume = {53}, number = {7}, pages = {2715-2734}, year = {2021}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2020.17257.6503}, abstract = {Discharge over the ogee spillway is related to the length of crest, upstream total head, and discharge coefficient. Also, the discharge coefficient is influenced by several factors. In this study, some parameters that are affecting the discharge coefficient in ogee weir are investigated. These are ogee spillway upstream slope, apron elevation, and downstream submergence. In this regard, some ogee spillway physical models were fabricated. These models include (1) ogee spillway with vertical upstream face, (2) ogee spillway with inclined upstream face (18, 33, and 45 degrees), (3) ogee spillways with downstream apron elevations (3, 5, 7, and 10 cm thickness) in free flow, and (4) ogee spillway with the vertical upstream slope in submerged flow condition. Results showed that in all the ogee weirs, the discharge coefficient (C) increases with increasing (P/He) and then remain constant. The value of the discharge coefficient decreased from 2.25 (in free flow) to 2.15 (in submerged flow). For a constant value of head over ogee spillways (He), the discharge coefficient decreased with increasing downstream apron elevation and submergence. The relative discharge coefficient had a constant trend at the beginning with parameter (hd/He), then it had a decreasing trend. The threshold value for submergence (hd/He), was 0.75 in the ogee spillway in this study. With increasing relative submergence (hd/He) from 0.75 to 1, the relative discharge coefficient (Cs/C0) decreased from 0.88 to 0.24.  }, keywords = {Ogee spillway,Discharge Coefficient,upstream slope,downstream apron elevation,free and submerged flow}, title_fa = {تعیین ضریب دبی سرریز اوجی و مطالعه اثرات استغراق، شیب بالادست و ارتفاع کف بند بر میزان تغییرات آن}, abstract_fa = {دبی جریان عبوری از روی سرریز اوجی به طول سرریز، بار آبی بالادست و ضریب دبی جریان بستگی دارد. عوامل متعددی نیز بر ضریب دبی جریان اثر می­‌گذارند. در این پژوهش، به بررسی برخی از پارامترهای مؤثر بر ضریب دبی سرریز اوجی مانند: شیب وجه بالادست، ارتفاع کف‌بند و استغراق پایین‌­دست پرداخته شده است. بدین منظور، مدل­‌های فیزیکی از سرریز اوجی ساخته شد. این مدل‌­ها دارای شیب متفاوت در وجه بالادست (وجه قائم و شیب­‌های 18، 33 و 45 درجه)، دارای ارتفاع کف­بند متفاوت 3، 5، 7 و 10 سانتی­‌متری در پایین‌­دست در حالت جریان آزاد و سرریز اوجی دارای شیب وجه قائم بالادست ولی در حالت مستغرق می‌­باشند. نتایج نشان داد که برای همه سرریزها، ضریب دبی با افزایش پارامتر P/He ابتدا سیر صعودی داشته و سپس روند ثابتی دارد. مقدار ضریب دبی از حدود 25/2 در حالت جریان آزاد به 15/2 در حالت جریان مستغرق کاهش می‌­یابد. به ازای یک بار آبی (He) معین، سرریزهای دارای کف­بند و حالت مستغرق، میزان دبی کمتری از خود عبور می‌­دهند. همچنین با استغراق سرریز با شیب وجه قائم بالادست، نحوه­‌ی تغییر ضریب دبی نسبی با پارامتر  (hd/He )، ابتدا روند ثابتی داشته و سپس کاهش یافته است. آستانه­‌ی استغراق (hd/He) در این پژوهش برای این سرریز 0/75 می‌­باشد و با افزایش نسبت استغراق (hd/He) از حدود 75/0 تا 1، ضریب دبی نسبی (Cs/C0) از 88/0 به 24/0 کاهش می­‌یابد.}, keywords_fa = {سرریز اوجی,ضریب دبی,شیب بالادست,ارتفاع کف‌بند پایین‌دست,جریان آزاد و مستغرق}, url = {https://ceej.aut.ac.ir/article_3774.html}, eprint = {https://ceej.aut.ac.ir/article_3774_95408d752b2ee2098f8af3777ee3ae5c.pdf} }