@article { author = {Shahraki, Mojtaba and shahabian, farzad and jome manzari, reza}, title = {Effect of Opening and Stiffener on Geometric Nonlinear Dynamical Behavior of Single-Curved FGM Shells under the Blast Loads}, journal = {Amirkabir Journal of Civil Engineering}, volume = {52}, number = {3}, pages = {691-710}, year = {2020}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2018.14849.5759}, abstract = {Functionally Graded Materials (FGMs) are kinds of composite materials that due to the continuity of mixture of constituent materials, have more effective mechanical properties which leads to eliminate the interlayer stress concentration. The most common usage of such materials is in thin-wall structures, such as plates and shells. One of the most effective factors in behavior of such structures especially in single-curved shells, thermal loads or Impact loads is caused by explosion. Also, due to some executive needs, make opening in shells and their behavioral changes are important and suggesting solution will be necessary. Therefore, in order to prevent large displacement and resistance improvement, using shells made of FGM and suitable stiffeners, will be suggested. In this study, ABAQUS finite element software has been used to survey the Effect of opening and stiffener on geometric nonlinear dynamical behavior of single-curved FGM shells under the blast loads. In order to do this, the effect of volume fraction index, the effect of different openings and stiffeners has been studied. Results show that by increasing the volume fraction index, the maximum amount of displacement of the shell decreased. Making opening in the center of the shells, has better function in contrast with making opening distribution in the level of shells. By increasing moment of inertia of longitudinal and circular stiffeners, the maximum displacement has been decreased. Also, by utilizing opening distribution and longitudinal stiffeners, the maximum amount of displacement can be reduced.}, keywords = {FGM Shells,Volume Fraction Index,Blast Loads,Opening,Stiffener}, title_fa = {اثر بازشو و سخت‌کننده بر رفتار دینامیکی غیرخطی هندسی پوسته‌های تک‌انحنایی FGM تحت بارهای انفجاری}, abstract_fa = {مواد هدفمند (FGM )گونه‌ای از مواد مرکب هستند که به واسطه‌ی پیوستگی ترکیب مواد تشکیل‌دهنده، خواص مکانیکی مؤثرتری نسبت به مواد مرکب چندلایه دارا می‌باشند که این مهم، منجر به از بین رفتن تمرکز تنش بین لایه‌ای می‌شود. بیشترین کاربرد این مواد در سازه‌های جدار نازک نظیر صفحه‌ها و پوسته‌ها می‌باشد. یکی از مؤثرترین عوامل تغییر رفتار این گونه سازه‌ها به‌ویژه پوسته‌های تک انحنایی، بارهای حرارتی و ضربه‌ای ناشی از انفجار می‌باشد که این چالش سبب رفتار دینامیکی غیرخطی آنها می‌گردد. همچنین به دلیل بعضی مسایل اجرایی، ایجاد بازشو در پوسته‌ها و تغییر رفتار آنها در برابر بارهای انفجاری مسأله‌ای مهم و پیشنهاد برای حل آن ضرورت می‌یابد. از این رو، به منظور بهبود مقاومت و کاهش مقدار بیشینه‌ی تغییرمکان، بهره‌گیری از پوسته‌های هدفمند و استفاده از سخت‌کننده‌های مناسب، توصیه می‌گردد. در این پژوهش، با استفاده از نرم‌افزار Abaqus ،به ارزیابی تأثیر انواع بازشو و سخت‌کننده بر روی رفتار دینامیکی پوسته‌های تک‌انحنایی FGM تحت بارهای انفجاری پرداخته شده است. برای این کار، اثر شاخص توان حجمی، اثر انواع بازشو و سخت‌کننده مورد بررسی قرار گرفته است. نتایج حاصل از این پژوهش نشان می‌دهد که با افزایش شاخص توان حجمی مقدار بیشینه‌ی تغییرمکان پوسته کاهش پیدا کرده است. ایجاد بازشو در مرکز پوسته عملکرد بهتری در مقایسه با ایجاد بازشوی گسترده در سطح پوسته داشته است. با افزایش لنگر لختی سخت‌کننده‌های طولی و حلقوی مقدار بیشینه‌ی تغییرمکان کاهش یافته است. همچنین، با استفاده‌ی توأم از بازشوی گسترده و سخت‌کننده‌های طولی می‌توان مقدار بیشینه‌ی تغییرمکان پوسته را تا حد زیادی کاهش داد.}, keywords_fa = {FGM Shells,Volume Fraction Index,Blast Loads,Opening,Stiffener}, url = {https://ceej.aut.ac.ir/article_3205.html}, eprint = {https://ceej.aut.ac.ir/article_3205_0fe4aba9f37ec3f8d7b2526cd38f55e2.pdf} }