@article { author = {Mahmoodi, Raheleh and Tajmir Riahi, Hossein and Zare, Mohammad Reza}, title = {Investigating the Effective Parameters on the Performance of hybrid lead rubber bearing system with shape memory alloy}, journal = {Amirkabir Journal of Civil Engineering}, volume = {52}, number = {3}, pages = {581-600}, year = {2020}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2018.14747.5731}, abstract = {In this paper, numerical analysis of the hybrid lead rubber bearing system with shape memory alloy was investigated by the finite element method using ABAQUS software and the effectiveness of various parameters on its performance was examined. The studied parameters were the bearing dimensions, type of shape memory alloy and its cross-sectional area, the lead core diameter, the thickness of rubber layers and the compressive stress applied on the bearing. In this hybrid bearing, shape memory alloy wires were used as a recovery unit and lead core was used as a unit for energy dissipation. For this purpose, a finite element model of the bearing was modeled using the Abaqus software and the effect of the various parameters mentioned on the bearing performance has been investigated. The results showed that this hybrid bearing has better seismic performance than lead rubber bearing. Finally, depending on what kind of performance is required from the bearing, its specifications can be obtained optimally}, keywords = {Base Isolation,Lead Rubber Bearing,Shape Memory Alloy,Passive control,seismic performance}, title_fa = {بررسی پارامتر‌های مؤثر بر عملکرد جداساز لرزه‌ای هسته سربی مجهز به آلیاژ حافظه‌دار}, abstract_fa = {در این پژوهش به بررسی تحلیلی و عددی سیستم جداساز ترکیبی هسته سربی با آلیاژ حافظه دار و بررسی پارامترهای مختلف مؤثر بر آن پرداخته شده است. پارامترهای مورد بررسی عبارتند از ابعاد جداساز، نوع آلیاژ حافظه‌دار و سطح مقطع سیم‌های آن، قطر هسته سربی، ضخامت لایه لاستیک و تنش فشاری. در این جداساز از آلیاژهای حافظه‌دار شکلی به عنوان واحد بازگرداننده و از هسته سربی به عنوان واحد اتلاف کننده انرژی استفاده شده است. بدین منظور یک مدل اجزای محدود از جداساز با استفاده از نرم‌افزار آباکوس مدل سازی شده و تأثیر پارامترهای مختلف ذکر شده بر عملکرد جداساز مورد بررسی قرار گرفته است. نتایج نشان می‌دهد که عملکرد لرزهای این جداساز، نسبت به سایر جداسازها بهتر بوده و در نهایت با توجه به اینکه چه نوع عملکردی از جداساز مدنظر است، می‌توان پارامترهای مورد مطالعه را به صورت بهینه به دست آورد. به عنوان مثال اگر اتلاف انرژی بیشتر مد نظر باشد به 4 طریق می‌توان عمل کرد: افزایش ابعاد جداساز، افزایش شعاع سیم‌های SMA ،افزایش قطر هسته سربی و یا افزایش ارتفاع جداساز. از بین موارد ذکر شده، افزایش شعاع سیم SMA و افزایش قطر هسته بیشترین اثرگذاری را دارا هستند. به طور مثال، در کرنش برشی 150 %اتالف انرژی در شعاع mm 2/5 و mm 4 به ترتیب ازJ 5080/2 به J 8376 افزایش پیدا می‌کند.}, keywords_fa = {جداساز پایه,تکیه‌گاه لاستیکی هسته سربی,آلیاژهای حافظه دار شکلی,عملکرد لرزه‌ای,سیستم کنترل غیرفعال}, url = {https://ceej.aut.ac.ir/article_3181.html}, eprint = {https://ceej.aut.ac.ir/article_3181_7ce063b28ced7c75a26ef9fda5867405.pdf} }