@article { author = {Shaykhi, Payman and LAJEVARDI, seyed hamid}, title = {Design and construction of inclined plane device for modeling the interface interaction of geo-synthetic layers}, journal = {Amirkabir Journal of Civil Engineering}, volume = {51}, number = {6}, pages = {1261-1276}, year = {2020}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2018.14276.5611}, abstract = {One of the important applications of geo-synthetics in the earth’s slopes, such as landfills and waste disposal areas, is to use them as liner system. Proper assessment of the interaction of geo-synthetics at slopes, such as landfill, is an important issue in preventing the slip and instability of the slopes. The inclined plane is a suitable method for assessing the interaction between the geo[1]synthetics interacting in a sloping and tilted state under low normal stresses. The European Standard EN ISO 12957-2 provides a “standard displacement” for estimating the geo-synthetic interface’s friction angle. In this paper, inclined plane device, which for the first time in Iran was completely designed and constructed, describes the technical characteristics of the device and prepares the sample. This apparatus has the ability to perform experiments to investigate the interaction of soil-soil, soil/geo-synthetics and geo-synthetic/geo-synthetic interfaces at low normal stress. Experiments are carried out on geo[1]membrane and geotextile types to investigate the interaction of their surface. By changing the type of geo-synthetics, it was observed that friction angle of geo-synthetic interfaces is not constant and depends on the type of geo-membrane and the woven or non-woven geo-textile. The geo-membrane/geo-textile interface is the least amount of geo-membrane with hard polyethylene, and the highest amount is used when polyvinyl chloride is used.}, keywords = {Geo-synthetic,laboratory study,inclined plane device,interface interaction,Geo-membrane/geo-textile}, title_fa = {طراحی و ساخت دستگاه سطح شیبدار جهت مدلسازی اندرکنش سطح مشترک لایه های ژئوسینتتیک}, abstract_fa = {یکی از کاربردهای مهم ژئوسینتتیک‌ها در شیروانی‌های خاکی از قبیل محل دفن زباله و حوضچه‌های آب و فاضلاب استفاده آنها به عنوان پوشش و عایق می‌باشد. ارزیابی صحیح اندرکنش سطح مشترک ژئوسینتتیک‌ها در سطوح شیروانی‌های خاکی از قبیل محل دفن زباله یک مسئله مهم جهت جلوگیری از وقوع لغزش و ناپایداری شیروانی‌ها می‌باشد. آزمایش سطح شیبدار یک روش مناسب جهت ارزیابی اندرکنش سطح مشترک ژئوسینتتیک‌هایی که در حالت مایل و شیبدار روی هم قرار گرفته و تحت تنش قائم کم هستند می‌باشد. استاندارد اروپایی 2-12957  EN ISOروشی تحت عنوان "جابجایی استاندارد" برای تخمین زاویه اصطکاک سطح مشترک ژئوسینتتیک‌ها ارائه کرده است. در این مقاله دستگاه آزمایش سطح شیبدار که برای اولین بار در ایران بطور کامل طراحی و ساخته شده همراه با تشریح مشخصات فنی دستگاه و آماده‌سازی نمونه معرفی می‌گردد. این دستگاه توانایی انجام آزمایش جهت بررسی اندرکنش سطح مشترک خاک-خاک، خاک-ژئوسینتتیک و ژئوسینتتیک-ژئوسینتتیک تحت تنش قائم کم را دارا می‌باشد. آزمایش‌هایی بر روی انواع ژئوممبرین و ژئوتکستایل جهت بررسی اندرکنش سطح مشترک آنها انجام می‌شود. با تغییر نوع ژئوسینتتیک‌ها مشاهده گردید که زاویه اصطکاک سطح مشترک آنها ثابت نمی‌باشد و بستگی به نوع ژئوممبرین و بافته یا نبافته بودن ژئوتکستایل، زاویه اصطکاک سطح مشترک آنها نیز تغییر می‌یابد. حالتی که ژئوممبرین از نوع پلی اتیلن سخت می‌باشد زاویه اصطکاک سطح مشترک ژئوممبرین- ژئوتکستایل کمترین مقدار و در حالتی که پلی وینیل کلراید استفاده شود بیشترین مقدار را دارا می‌باشد.}, keywords_fa = {ژئوسینتتیک,مطالعه آزمایشگاهی,دستگاه سطح شیبدار,اندرکنش سطح مشترک,ژئوممبرین-ژئوتکستایل}, url = {https://ceej.aut.ac.ir/article_3024.html}, eprint = {https://ceej.aut.ac.ir/article_3024_f2f04d1bf5f356b01187aedb6a4917fc.pdf} }