@article { author = {Ghaffarpour Jahromi, S. and Vatani Oskouei, A. and Karkhaneh, S.}, title = {Evaluation of Geometry and Essential Parameters of Topographic Irregularities for Generalization Seismic Results of Manjil Earthquake for Regions with Soil Type II}, journal = {Amirkabir Journal of Civil Engineering}, volume = {51}, number = {1}, pages = {19-28}, year = {2019}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2018.13007.5311}, abstract = {In order to study geometry of topographies on the seismic site response and evaluate essential parameters used for generalizing seismic results to the topographic irregularities, several numerical finite element studies have been performed by ABAQUS program, the results are presented in the form of the time history and dimensionless graphs. In this paper rectangular, trapezoidal and triangular topographies are studied with different heights (20-100 m) and different angles (15-75 degrees) to evaluate effect of shape ratio, height, length and angle of slope on the seismic response. Applied Seismic motion is the record of Manjil earthquake in horizontal direction. Besides, models are two-dimensional and flexible. ABAQUS infinite elements can be used to define infinite boundaries in the dynamic problems. These elements have elastic behavior and absorb the wave energy so that they act as absorbent boundaries. Researchers such as Nielsen, Preisig and Jeremic have examined the performance of these elements. Actually, if slope angle of topographic irregularities is increased in how slope length of topographies is decreased, seismic response will be weakened even though shape ratio is boosted. Also slope height of topographic irregularities is increased in how slope length of topographies is boosted too; seismic response will be amplified even though shape ratio is constant.}, keywords = {Topography Effects,Site Seismic Response,Topographies Geometric Characteristics,Shape Ratio,Slope Length}, title_fa = {ارزیابی هندسه و مشخصات نامنظمی توپوگرافی در تعمیم نتایج تحلیل لرزه‌ای-زلزله منجیل در مناطق دارای خاک نوع دو}, abstract_fa = {تجربیات به‌دست آمده از تخریب زلزله‌های اخیر نشان‌دهنده اهمیت شکل و هندسه توپوگرافی سطحی بر وسعت و شدت خرابی ساختمان‌ها و توزیع مکانی آن‌ها در حین زلزله دارد. فلسفه‌ی اهمیت این موضوع، الگوهای رفتاری پیچیده برای عوارض توپوگرافی بوده که منجر به ایجاد تفاوت­های قابل ملاحظه‌ای بین امواج گسیل شده از چشمه و امواج رسیده به سطح زمین می‌شود. با توجه به حساسیت نتایج تحلیل لرزه‌ای به خصوصیات هندسی بخصوص عوارض سطحی، تحلیل‌های پارامتریک در حوزه خصوصیات هندسی تمرکز بیشتری یافته و از طریق بی‌بعد ساختن نتایج خروجی، امکان تعمیم نتایج به ترکیبات متنوع از نظر هندسه و امواج برخوردی میسر می‌گردد. در مقاله حاضر برای چندین هندسه متفاوت، مطالعه‌ی عددی المان محدود با به‌کارگیری برنامه‌ی آباکوس (ABAQUS) انجام شده است. نتایج این تحقیق به وضح نشان می‌دهند پاسخ لرزه‌ای ساختگاه از نظر کیفی مشابه ولی از نظر کمی بسیار متفاوت است. اگر چه عموما از یک فاکتور بدون بُعد بنام ضریب شکل به عنوان مهمترین خصوصیت هندسی در تعیین پاسخ لرزه‌ای ناهمواری‌ها و توپوگرافی‌ها استفاده می‌شود ولی در رابطه با توپوگرافی‌های با زاویه‌ی شیب متفاوت، فاکتور طول شیب توپوگرافی نیز باید به عنوان یکی دیگر از خصوصیات هندسی تاثیرگذار در تقویت امواج لرزه‌ای مورد توجه قرار گیرد و  بررسی ضریب شکل به تنهایی در تعمیم دادن نتایج، کافی و مناسب نخواهد بود.}, keywords_fa = {Topography Effects,Site Seismic Response,Topographies Geometric Characteristics,Shape Ratio,Slope Length}, url = {https://ceej.aut.ac.ir/article_2862.html}, eprint = {https://ceej.aut.ac.ir/article_2862_307a779945463949c97354ed42e890f0.pdf} }