@article { author = {Hassanlourad, M. and Salehzadeh, H. and Shahnazari, H.}, title = {Improvement of Calcareous Sand by Using Chemical Grouting}, journal = {Amirkabir Journal of Civil Engineering}, volume = {41}, number = {1}, pages = {95-104}, year = {2009}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2009.223}, abstract = {In this paper, the improvement potential of calcareous sand produced in KishIsland by using a chemical grout is investigated. The main characteristics of this sand are its high voids ratio and tendency to be crushed under moderate stresses. The improvement process of sand is conducted using a sodium silicate grout injected with additives such as formamide and sodium aluminate. Samples were prepared in different initial relative densities and then grouted. It is observed that the maximum uniaxial strength, initial tangent modulus and failure strain are obtained in water/silicate ratio of 0.5.Uniaxial strength and initial tangent modulus are increased with time but failure strain variation with time is a function of water/sodium silicate ratio and additives content. Formamide increases and sodium aluminate decreases the uniaxial strength and initial tangent modulus. Furthermore, increasing of grain size decreases grouted sand uniaxial strength. Uniform grading results in brittle and non-uniform grading results in ductile stress-strain behavior. Presence of sulphates and chlorides solved in water reduces the uniaxial strength and increases the initial tangent modulus of grouted sand.}, keywords = {Calcareous sand,particle crushing,chemical grout,uniaxial strength}, title_fa = {اصلاح خاکهای ماسه ای کربناته با استفاده از تزریق شیمیایی}, abstract_fa = {در این مقاله قابلیت اصلاح ماسه کربناته محصول جزیره کیش با استفاده از یک دوغاب شیمیایی بررسی   می­گردد. ویژگی اصلی این خاک نسبت منافذ بالای داخل دانه ها و حالت خرد شدگی آنها در حین بارگذاری         می­باشد. فرآیند اصلاح خاک یادشده با استفاده از تزریق دوغاب سیلیکات سدیم همراه با افزودنیهایی مانند فرم آمید و آلومینات سدیم صورت گرفت. نمونه­ها با دانسیته­های نسبی اولیه مختلف ساخته و تزریق شدند. مقاومت تک محوری بیشینه، مدول مماسی اولیه و کرنش لحظه گسیختگی در نسبت آب به سیلیکات سدیم برابر 5/0 حاصل گردید. مقاومت تک محوری و مدول مماسی اولیه با گذشت زمان افزایش یافت ولی تغییرات کرنش لحظه گسیختگی، تابع نسبت آب به سیلیکات سدیم و مقادیر افزودنیها بود. فرمامید باعث افزایش و آلومینات سدیم باعث کاهش مقاومت تک محوری و مدول الاستیسیته مماسی اولیه می­گردند. علاوه براین افزایش اندازه دانه ها باعث کاهش مقاومت تک محوری خاک تزریق شده می­گردد. دانه بندی یکنواخت منجر به رفتار تنش-کرنش ترد و دانه بندی گسترده منجر به رفتار تنش-کرنش نرم می­گردد. وجود املاحی مانند سولفاتها و کلرایدهای محلول در آب باعث کاهش مقاومت تک محوری و افزایش مدول مماسی اولیه خاک تزریق شده می­گردد.}, keywords_fa = {Calcareous sand,particle crushing,chemical grout,uniaxial strength}, url = {https://ceej.aut.ac.ir/article_223.html}, eprint = {https://ceej.aut.ac.ir/article_223_df11548853903838c71588cba34dc685.pdf} }