@article { author = {Negahdar, A. and Shabanian, M.R. and NikGhalbPour, M.}, title = {The Effect of Heavy Metal Contaminants on the Strength Parameters of Sandy Clay}, journal = {Amirkabir Journal of Civil Engineering}, volume = {50}, number = {5}, pages = {835-844}, year = {2018}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2017.12869.5287}, abstract = {Desirable physical and behavioral characteristics of clay soils have resulted in their wide usage in engineering landfills. Clay soils are able to interact with the materials in contaminants thanks to their special mineral structure and adsorb part or all of the hazardous materials present in the leachate leaked in them. Previous studies have shown that changes in the physical and chemical characteristics of pore fluid in soil, given the type of minerals clay soils and the soil structure, significantly influence the properties of soil engineering including shear parameters, the extent of swell, and water adsorption percentage. The aim of this research is to study the effect of heavy metal contaminants on some strength and geotechnical parameters of sandy clays. For this purpose, following preparation of the samples, adsorption and direct shear experiments along with determination of the liquid limit were performed on the samples which had been exposed to the heavy metal contaminants of Pb and Zn. The results indicated that across the three studied clay types (the mixed sand kaolinite samples with different sand percentages), with the increase in the concentration of both contaminants, soil cohesion diminishes, while the internal friction angle of the samples was not affected by presence of heavy metal contaminants. When concentration of Zn increases to 25 cmmol, cohesion of samples with 90% and 60% of kaolinite decreased 20% and 23% respectively. While in the presence of Pb decrease in cohesion is 42% and 51%.}, keywords = {Sandy clay,Heavy metal contaminant,Cohesion,Internal Friction Angle,Atterberg Limits}, title_fa = {تاثیر آلاینده فلز سنگین بر پارامتر‌های مقاومت برشی خاک رسی ماسه‌دار}, abstract_fa = {ویژگی‌های مطلوب فیزیکی و رفتاری خاک‌های رسی، موجب استفادهی گسترده از آنها در مراکز دفن مهندسی زباله شده است. خاک‌های رسی به دلیل ساختار خاص کانی خود قادرند با مواد موجود در آلاینده‌ها در اندرکنش قرارگرفته و تمام یا قسمتی از مواد خطرناک موجود در شیرابه‌ی نشت یافته در خود را جذب نمایند. مطالعات پیشین نشان دهنده آن است که تغییر در خصوصیات فیزیکی و شیمیایی مایع منفذی در خاک، بسته به نوع کانی‌های تشکیل دهنده خاک‌های رسی و ساختار خاک، به میزان محسوسی بر مشخصات مهندسی خاک ازجمله پارامترهای برشی، میزان تورم و درصد جذب آب تأثیرگذار است. هدف تحقیق حاضر، مطالعه تأثیر حضور آلاینده‌های فلز سنگین بر برخی پارامترهای مقاومتی و ژئوتکنیکی خاک‌های رسی ماسه‌دار است. برای این منظور پس از آماده‌سازی نمونه‌ها، آزمایش‌های جذب، برش مستقیم و تعیین حد روانی بر روی نمونه‌هایی که در معرض آلایندههای فلز سنگین سرب و روی قرارگرفته بودند، انجام شد. نتایج نشان دهنده‌ی آن است که در سه نوع خاک موردمطالعه (نمونه‌های مخلوط کائولینیت-ماسه با درصدهای مختلف ماسه) با افزایش غلظت هر دو آلاینده چسبندگی خاک کاهش یافته است. به گونه‌ای که با افزایش غلظت هر دو آلاینده‌ی فلز سنگین تا 25سانتیمول بر کیلوگرم خاک، چسبندگی نمونه‌های حاوی %90و %60کائولینیت در حضور آلاینده‌ی روی به ترتیب %20و %23و در حضور آلاینده‌ی سرب به ترتیب به میزان %42و %51کاهش یافته است. درحالیکه زاویه اصطکاک داخلی نمونه‌ها تحت تأثیر حضور آلاینده‌های فلز سنگین نبوده است.}, keywords_fa = {Sandy clay,Heavy metal contaminant,Cohesion,Internal Friction Angle,Atterberg Limits}, url = {https://ceej.aut.ac.ir/article_1997.html}, eprint = {https://ceej.aut.ac.ir/article_1997_bbbfdaabcb37130789457e3a48564bc0.pdf} }