@article { author = {Sabouri, Saied and Asad Sajadi, Seyed Ramin}, title = {An Experimental Investigation of Plate Zipping Prevention in Steel Plate Shear Walls by Using the Corner Stiffeners}, journal = {Amirkabir Journal of Civil Engineering}, volume = {42}, number = {1}, pages = {23-30}, year = {2010}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2010.149}, abstract = {Plate in steel plate shear walls has high capability for earthquake energy damping. The Experimental investigations show that the plate zipping in corner and edge of plate is the cause of damage and failure in steel plate shear walls. For prevention of zipping the first, classic theory is investigated using finite element and then a steel plate shear wall specimen was tested experimentally with using four stiffeners in the edges. The results show that the plate zipping doesn't occur when the stiffeners are used in the edges of plate. In the specimen, tearing was started from the stiffener corner and then extended up to the triangular area which is closed between stiffener and fish plate edges. Finally the tearing speard smoothly to the edge of fish plate in the out of aforesaid triangular area. Also the stiffeners are capable to create a post buckling field after tearing of plate.}, keywords = {Steel Plate Shear Wall,Stiffener,Zipping,Post Buckling Field}, title_fa = {بررسی آزمایشگاهی سخت کننده های گوشه ای برای جلوگیری از زیپ شدن ورق در دیوارهای برشی فولادی}, abstract_fa = {ورق در دیوارهای برشی فولادی دارای توانایی بالایی در جذب انرژی زلزله است. مطالعات آزمایشگاهی نشان می­دهد که علت خرابی و ضعف تعدادی از این نوع دیوارها زیپ شدگی ورق از گوشه و لبه ورق واسط  می­باشد. برای جلوگیری از زیپ شدگی در این تحقیق پس از انجام مطالعات نظری با نرم افزار المان‌محدود یک نمونه دیوار برشی فولادی یک طبقه آزمایش شده است که در گوشه های آن چهار سخت کننده نصب شده است. نتایج آزمایش نشان می­دهد که با قراردادن سخت کننده های یاد شده می­توان از زیپ شدگی ورق جلوگیری کرد. در این آزمایش پارگی ورق از یک گوشه سخت کننده شروع شده و ابتدا به داخل ناحیه ورق مثلثی محصور به سخت کننده و لبه ورقهای واسط گسترش یافته، سپس در لبه ورق واسط در بیرون ناحیه یاد شده به آرامی پیش می­رود. حتی بعد از پارگی قابل توجه ورق، سخت کننده ها توانایی تشکیل میدان پس‌کمانش را دارند. }, keywords_fa = {Steel Plate Shear Wall,Stiffener,Zipping,Post Buckling Field}, url = {https://ceej.aut.ac.ir/article_149.html}, eprint = {https://ceej.aut.ac.ir/article_149_faec3993c15e3666acdacd34660f9c5c.pdf} }