@article { author = {Cheraghi Seifabad, Masoud}, title = {Fracture Mechanics of Different Rocks}, journal = {Amirkabir Journal of Civil Engineering}, volume = {44}, number = {1}, pages = {1-9}, year = {2012}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2012.89}, abstract = {Fracture mechanics approach is to assess the process of crack propagation in a known stress field. The amount of material strength against the crack propagation is named fracture toughness. In this research, different cracked samples are used to determine the fracture toughness of different rocks. The methods proposed by ISRM (International Society for Rock Mechanics) are two tests; i.e. three point  bend test and short rod. The present research is based on the three point bent test. Also, in these tests two levels are utilized, 1-load control 2-displacement control, but in the present tests the level I is chosen for two types of rocks.}, keywords = {Fracture mechanics,Fracture Toughness,Three Point Bend Test,Anisotropy}, title_fa = {بررسی مکانیک شکست سنگ‌های مختلف}, abstract_fa = {مکانیک شکست، بررسی فرآیند رشد ترک در یک حوزه معین تنش است. میزان مقاومت ماده در برابر پیشرفت ترک، چقرمگی شکست نامیده می‌شود. در این تحقیق، نمونه‌های مختلف آزمایشگاهی ترک‌دار برای تعیین چقرمگی1 سنگهای مختلف استفاده شد. از آنجائیکه انجمن بین المللی مکانیک سنگ2 بر اساس دو نوع آزمایش استوار است (میله کوتاه3، آزمایش خمش سه نقطه‌ای4) در اینجا آزمایش خمش سه نقطه‌ای انتخاب شده است و در این آزمایشها دو حالت مطرح است: 1- هدایت بار5 2- هدایت جابه جایی6، که برای دو نوع سنگ مختلف هدایت بار5 انتخاب شد.}, keywords_fa = {Fracture mechanics,Fracture Toughness,Three Point Bend Test,Anisotropy}, url = {https://ceej.aut.ac.ir/article_89.html}, eprint = {https://ceej.aut.ac.ir/article_89_2d78c3fb67fb14875dc6310c6dc3cc0c.pdf} } @article { author = {Habibi, Alireza and Izadpanah, Mehdi and Yazdani, Azad}, title = {Evaluation Of Seismic Performance Of RCMRFs Using Damage Indices}, journal = {Amirkabir Journal of Civil Engineering}, volume = {44}, number = {1}, pages = {11-19}, year = {2012}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2012.91}, abstract = {Determination and prediction of damage imposed on the structures is one of the most important topics related to the performance based design. In this regard, the standards regarding the performance based design have introduced some levels & limitations. The main objective of this research is to evaluate these levels by comparison of damage indices calculated from dynamic & pushover analysis. IN addition, performance of ABA & 2800 codes in limiting damage of structures is evaluated. For this purpose, seven earthquake records, which are appropriate for site effects under consideration, are selected & scaled in such a way that average response spectrum of them has minimum difference  with Iranian code 2800 design spectrum. then damage analysis is performed on several reinforced concrete moment resisting frames. Results represented that drift criterion introduced by standards such as FEMA273 & ATC40 can lead to incorrect results in determination of seismic performance of structures. it was illustrated that ABA & 2800 codes have proper performance in limiting damage of structures at Life Safety level. }, keywords = {Damage,performance base design,Dynamic analysis,pushover analysis,Drift Criterion}, title_fa = {ارزیابی عملکرد لرزه ای قاب های خمشی بتن مسلح با استفاده از شاخص های خسارت}, abstract_fa = {یکی از مهمترین مسایل در طراحی عملکردی، تعیین و پیش­بینی میزان خسارت وارد بر سازه­ها است که  بدین­منظور استانداردهای مبتنی بر عملکرد، سطوح و حدود مشخصی را ارائه نموده­اند. هدف از تحقیق حاضر ارزیابی این­ سطوح، با استفاده از مقایسه­ی شاخص­های خسارت در حالت دینامیکی و بارافزون و هم­چنین بررسی نحوه­ی عملکرد آیین­نامه­های آبا و 2800 در محدود نمودن خسارت وارد برسازه­ها است. بدین­منظور با طراحی چندین قاب خمشی بتن مسلح و با در نظرگرفتن 7 ثبات زلزله، به ­گونه­ای که طیف حاصل از آنها دارای کمترین­اختلاف با طیف طرح آیین­نامه­ی 2800 باشد، به ارزیابی و مقایسه­ی خسارت وارد بر این قاب­ها پرداخته شد. نتایج نشان می­دهند که، معیار تغییرشکل نسبی ارائه شده در استانداردهایی مانند ­FEMA و­ATC40     نمی­تواند به تنهایی میزان خسارت وارد بر سازه­ها را به خوبی منعکس نمایند. هم­چنین نتایج نشان دهنده عملکرد­مناسب آیین­نامه­های آبا و 2800 در محدود نمودن خسارت وارد بر سازه­های طراحی شده طبق این آیین­نامه­ها در هدف تامین ایمنی­جانی­افراد است.}, keywords_fa = {Damage,performance base design,Dynamic analysis,pushover analysis,Drift Criterion}, url = {https://ceej.aut.ac.ir/article_91.html}, eprint = {https://ceej.aut.ac.ir/article_91_cdf3f4ce5ce5fa41d859db293cc84f62.pdf} } @article { author = {Sharifzadeh, Mostafa and Siraei, Seddigheh}, title = {Design and Development of Three-Dimensional laser Roughness Measurement Apparatus}, journal = {Amirkabir Journal of Civil Engineering}, volume = {44}, number = {1}, pages = {21-29}, year = {2012}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2012.92}, abstract = {Rock mass behavior is closely depends on rock joints characteristics, rock joint behavior is depends on its surfaces roughness. There are several methods to measure joint surfaces roughness by two or three dimensional. Three dimensional methods are expensive and advanced technology, thus to obtain high precision roughness of joint surfaces a new apparatus is designed and developed for first time in Iran. Using the designed apparatus the joint surfaces measurement with high precision is possible with low expenses. The apparatus is made up of two parts consisting hardware and software. Hardware consists of: laser head, cross table, and digital camera. The measured data is processed in software to obtain three dimensional surfaces roughness. As an advantageous of the developed apparatus it is possible to determine surface roughness using non-destructive method and same sample could be used for mechanical laboratory testing. To verify the apparatus performance a rock joint specimen roughness profiles is measured with 1mm intervals and the surface topography of joint surface is obtained with 1mm*1mm cell size. In this paper the apparatus assembly and its application along with the results are illustrated.}, keywords = {Joint,Roughness,Laser,Rough measurement,Image processing}, title_fa = {طراحی و ساخت دستگاه زبری سنجی سه بعدی لیزری}, abstract_fa = {رفتار یک توده سنگ به خواص سنگ بکر و ناپیوستگی آن بستگی دارد. از طرف دیگر رفتار هیدرومکانیکی  درزه­ها به وضعیت زبری سطح آن وابسته است. روش­های مختلفی برای اندازه­گیری زبری سطح درزه­ها وجود دارد که خروجی آنها به صورت دو بعدی یا سه بعدی است. به علت فناوری بسیار بالای مورد استفاده در روش­هایی با خروجی سه بعدی، دقت به مراتب بالاتر و در نتیجه هزینه­های مربوط به آنها بالاتر است. ازاین رو بیشتر اندازه­گیری­ها از روش­های دو بعدی انجام می­شود. بدین منظور برای اولین بار در ایران دستگاهی طراحی و ساخته شد که با صرف هزینه­ی بسیار پایین با استفاده از آن می­توان زبری سطح درزه را تعیین نمود. دستگاه زبری­سنجی شامل دو بخش سخت­افزاری و نرم­افزاری است. در بخش سخت­افزاری، یک لیزر خطی برای برداشت از سطح نمونه و یک دوربین رقمی برای ثبت اطلاعات بر روی یک میز صلیبی نصب شد و در بخش نرم­افزاری، برای پردازش داده­ها برنامه­ای مورد استفاده قرار گرفت که خروجی آن به­صورت سه بعدی است. با استفاده از این دستگاه، علاوه بر غیر مخرب بودن روش نوری، بدون نیاز به صرف هزینه­های بالا، امکان دسترسی به داده­های سه بعدی با دقت بالا فراهم می­شود. به این صورت که مقاطعی با فاصله­ی 1 میلی­متر تهیه شده و در هر مقطع نقاط نقطه به نقطه بررسی شده و مختصات نقاط محاسبه می­شود. در این مقاله نحوه­ی ساخت و عملکرد دستگاه تشریح، و نتایج اندازه­گیری­ها آورده می­شود. }, keywords_fa = {Joint,Roughness,Laser,Rough measurement,Image processing}, url = {https://ceej.aut.ac.ir/article_92.html}, eprint = {https://ceej.aut.ac.ir/article_92_510361eb0a25f66417687a47f660bdaf.pdf} } @article { author = {Eshghi, Sassan and Tavafoghi Jahromi, Alireza}, title = {Experimental Study of Concrete Tunnel Form Buildings}, journal = {Amirkabir Journal of Civil Engineering}, volume = {44}, number = {1}, pages = {31-42}, year = {2012}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2012.93}, abstract = {The tunnel form buildings are used for mass construction in many countries. This construction method is very interesting because of its fast construction technique and low cost. But there is deficiency of researches about tunnel form building in comparison to the other conventional building systems. There are no special requirements for seismic analysis and design of this type of buildings. According to high risk of earthquake and using of this construction method in many projects in Iran, some more studies should be done to evaluate seismic behaviour of tunnel form buildings. In this paper, an experimental program was performed in which the testing of two three-story 1/5-scale of the tunnel form building were carried out to clarify the seismic behaviour of structures. The experimental program consisted of some cyclic loadings and forced vibration tests in order to study the failure mechanisms and the effects of cracking on the fundamental period. The behavior of the specimens was simulated by finite element model and a good correlation was obtained between experimental and numerical results. This study showed that the tunnel form buildings have low level of ductility and brittle failure mechanism was observed. }, keywords = {Tunnel Form Buildings,Cyclic loading,Forced Vibration Test,Concrete,nonlinear,Fundamental Period}, title_fa = {بررسی آزمایشگاهی رفتار لرزه‌ای ساختمان‌های بتنی با سیستم تونلی}, abstract_fa = {امروزه ساختمان‌های تونلی در سراسر دنیا مورد استفاده هستند و در پروژه‌های انبوه‌سازی کاربرد فراوانی دارند. سرعت بالا و کاهش هزینه‌های اجرایی باعث شده تا طراحی و اجرای این ساختمان‌ها بیش از گذشته مورد توجه قرار گیرد. در مقایسه با سایر سیستمهای سازه‌ای، مطالعات انجام شده بر روی ساختمان‌های تونلی بسیار کم است. در آیین‌نامه‌های طراحی سازه‌ها در برابر زلزله نیز تمهیدات خاصی برای تحلیل و طراحی این قبیل سازه‌ها در نظر گرفته نشده است. با توجه به لرزه‌خیزی ایران و افزایش استفاده از این سیستم، نیاز است با مطالعات بیشتر، ارزیابی دقیق‌تری از عملکرد لرزه‌ای این ساختمان‌ها شود. در این مقاله تلاش شده است با انجام مطالعات آزمایشگاهی بر روی دو نمونه ساخته شده با مقیاس یک به پنج، به بررسی رفتار لرزه‌ای این ساختمان‌ها پرداخته شود. در این مطالعات آزمایش‌های بارگذاری رفت و برگشتی و آزمایش‌های ارتعاش اجباری انجام شده و مکانیسمهای خرابی و رفتار سازه در محدوده غیر خطی مطالعه شده است. هم‌چنین خصوصیات لرزه‌ای در محدوده عملکرد خطی مانند زمان تناوب مد اول ارتعاشی و آثار ترک خوردگی بر آن بررسی شده است. در ادامه به مدلسازی عددی نمونه‌ها پرداخته شده و نتایج تحلیل‌های رایآن‌های برابری خوبی با نتایج به‌دست آمده از آزمایش‌ها را نشان می‌دهد. بر اساس این مطالعات مشخص شد ساختمان‌های تونلی رفتار شکل‌پذیری نشان نداده و در آن‌ها مکانیزم خرابی ترد دیده شد. }, keywords_fa = {Tunnel Form Buildings,Cyclic loading,Forced Vibration Test,Concrete,nonlinear,Fundamental Period}, url = {https://ceej.aut.ac.ir/article_93.html}, eprint = {https://ceej.aut.ac.ir/article_93_b7154a1e4d7bb132e5dca4ff7aaaa51c.pdf} } @article { author = {Abolghasemi, Mansor}, title = {The Effects of Flow Diversion on Sediments Entering the Intake in 90 Deg. Diversion Angle in Sinus River}, journal = {Amirkabir Journal of Civil Engineering}, volume = {44}, number = {1}, pages = {43-54}, year = {2012}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2012.95}, abstract = {The outer part of curve in meandering rivers are suitable places for diversions, as the secondary currents in this locations cause the transfer of the river-bed sediments towards the convex bank. Flow diverting from the outer bend causes the formation of a transverse flow component in depth to surface flow, having an opposite alignment with the secondary current and consequently transferring a part of the sediment load of the river to intake mouth. Besides diversion of the flow will cause the change of the flowing currents pattern in the river bend and decrease the energy of the secondary current in this location, which is important in sediment transportation. This research carried out on the physical model of Sinuosity River. The results has showed that along with low ratios of flow diversion to the intake mouth has a little effect on the secondary current, and also this current causes the repelling of sediments from the outer bend of river. Along with the increase of the ratio of diverted flow, the energy of secondary currents decrease and the ratio of sediment diversion increases. In a ratio of flow diversion, the secondary flow energy fully damped. After that, the sediments entering to the intake mouth has a higher increase compared to the previous situation. The results of Research have showed that the graph curve comparing the changes of diverted sediments to the intake structures, with the flow diversion generally follows the pattern similar to the S shape. The flow depth in the outer part of curve is also the effective parameters on secondary flow. The Increasing of river depth causes intensity in secondary energy and thus decreasing in sediment entering to the intake. In this paper, the effects of flow diversion ratio to sediments ratio entering to the intake structure by considering different flow depths with 90-degree diversion angle was presented.}, keywords = {Physical model,lateral intake,flow rate diversion,sediment rate diversion,90 deg. Diversion angle,sinuous river}, title_fa = {اثر انحراف جریان بر رسوب ورودی به آبگیر با زاویه انحراف 90 درجه در رودخانة سینوسی}, abstract_fa = {قوس خارجی رودخانه، مکان مناسبی برای آبگیری است زیرا جریان ثانویه یا حلزونی در این ناحیه موجب انتقال رسوبات بستر از قوس خارجی بطرف قوس داخلی می‌شود. انحراف جریان از قوس خارجی باعث شکل‌گیری مولفه‌ای عرضی در عمق آبراهه تا سطح جریان، بسمت آبگیر در جهت مخالف جریان ثانویه ‌شده و  موجب انتقال بخشی از رسوبات بستر رودخانه به داخل آبگیر می‌شود. علاوه بر آن، انحراف جریان باعث تغییر الگوی جریان در قوس و کاهش سرعت جریان حلزونی در قوس و بعبارت دیگر کاهش قدرت جریان ثانویه در این ناحیهشده که بر ساز و کار انتقال رسوب در سردهانة آبگیر اثر خواهد گذاشت. نتایج تحقیقات حاضر برروی نمونة آزمایشگاهی پیچان رود سینوسی نشان داد که در نسبت‌های کم انحراف جریان به آبگیر، این انتقال اثر زیادی بر قدرت جریان ثانویه در قوس نگذاشته و جریان حلزونی همچنان باعث دورسازی رسوبات از قوس خارجی میجشود. با افزایش نسبت انحراف آب، قدرت جریان ثانویه کاهش یافته و نسبت رسوب ورودی به آبگیر افزایش بیشتری نسبت به قبل بصورت غیر خطی پیدا می‌نماید تا اینکه در نسبتی از انحراف آب، جریان ثانویه درجلوی سردهانه بهجطور کامل مستهلک شده است. از این نقطه به بعد شیب منحنی معکوس شده و نسبت رسوب منحرف شده، آهنگ رشد بیشتری نسبت به انحراف جریان پیدا می‌نماید. نتایج تحقیقات نشان داد که منحنی تغییرات نسبت انحراف جریان به نسبت انحراف رسوب به آبگیر به ‌شکل منحنی S است. عمق جریان در قوس خارجی نیز از عوامل موثر بر جریان ثانویه است، در اثر افزایش عمق، ناشی از افزایش دبی در آبراهه، قدرت جریان ثانویه افزایش یافته و میزان رسوب ورودی به آبگیر را کاهش می‌دهد. در این مقاله اثر نسبت انحراف جریان بر نسبت ورود رسوب به ازای عمقجهای مختلف جریان، در آبگیری با زاویة انحراف قائمه بررسی و نتایج مربوطه ارائه شده است.}, keywords_fa = {Physical model,lateral intake,flow rate diversion,sediment rate diversion,90 deg. Diversion angle,sinuous river}, url = {https://ceej.aut.ac.ir/article_95.html}, eprint = {https://ceej.aut.ac.ir/article_95_7168921c44c95cd23f69bebb6860e6a0.pdf} } @article { author = {Faramarzi, Lohrasb and Horiyat, Aiin}, title = {Stability Analysis of Zayandeh-Rud Double arc Dam Body and Foundation Using the Results of Instrumentation and Numerical Modeling}, journal = {Amirkabir Journal of Civil Engineering}, volume = {44}, number = {1}, pages = {55-63}, year = {2012}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2012.97}, abstract = {The instrument performs protection, preservation and control dam behavior, failure detection and timely treatment to prevent the occurrence of the risks and increase the longevity of the dam during construction and operation. In this paper, Zayandeh-Rud dam instrumentation data were analyzed and the stability condition of the dam, foundation and abutments are evaluated. Finally, considering the position of the instruments the distinct element method was employed. The effect of shear and normal stiffness on body and foundation displacements was investigated and the actual values of the shear and normal stiffness were selected as the input model. In this study, Mohr-Coulomb criterion are used for joint behaviors, which are defined as boundary between rock foundation and dam body and boundary between concrete arch blocks, and comparison between measured and calculated values by numerical models has been investigated and good agreement between the results obtained. Results of numerical modeling and measurements have shown that the dam body and foundation are stable. Due to poor geological condition of right wall of dam, the displacements obtained in comparison with the left wall are higher. Also demonstrates that stress and deformation of dam body and foundation, strongly influenced by variation of lake water level.}, keywords = {Instrumentation,displacement,shear and normal stiffness,Rock foundation,distinct element method}, title_fa = {آنالیز پایداری بدنه و پی سد بتنی دوقوسی زاینده رود با استفاده از نتایج ابزاردقیق و شبیه سازی عددی}, abstract_fa = {حفاظت، نگهداری و پایش رفتار سد، تشخیص خرابی و تعمیر به موقع آن برای پیش­گیری از وقوع خطرات احتمالی و افزایش طول عمر سد چه در زمان ساخت و چه در زمان بهره­برداری توسط ابزار دقیق انجام می شود. در این مقاله داده­های ابزاردقیق سد زاینده­رود مورد تجزیه و تحلیل قرار گرفته و با مقایسه نتایج حاصل از ابزارهای مختلف، وضعیت پایداری سد، پی و تکیه­گاه­ها ارزیابی شده است. در پایان شبیه­سازی عددی پی و بدنه با در نظر گرفتن محل دقیق ابزار با استفاده از روش اجزای مجزا انجام شد. اثر سختی برشی و نرمال بر جابجایی­های بدنه و پی بررسی شده و مقادیر واقعی آنها به عنوان داده­های ورودی برای شبیه­سازی عددی انتخاب شد. در این تحقیق معیار تسلیم موهر کولمب برای درزه­های بین بلوک­ها و در مرز سنگ پی و بدنه استفاده شد و مقایسه بین تغییرشکل­های اندازه­گیری شده توسط ابزار و مقادیر محاسبه شده بوسیله       شبیه­سازی عددی مورد بررسی قرار گرفت و هم­خوانی خوبی بین نتایج دیده شد. نتایج حاصل از تحلیل رفتارنگاری ابزار و شبیه­سازی عددی نشان داده است که رفتار سد منظم و پایدار است و به دلیل ضعیف بودن وضعیت زمین­شناسی جناح راست، جابجایی­های بدست آمده در مقایسه با جناح چپ دارای مقادیر بیشتری است. }, keywords_fa = {Instrumentation,displacement,shear and normal stiffness,Rock foundation,distinct element method}, url = {https://ceej.aut.ac.ir/article_97.html}, eprint = {https://ceej.aut.ac.ir/article_97_222f260a7d039ce17762329ddd678241.pdf} } @article { author = {Ramezaniyanpor, Aliakbar}, title = {Comparative Study on Microstructure and Durability of Concretes Containing Nano Silica and Silica Fume}, journal = {Amirkabir Journal of Civil Engineering}, volume = {44}, number = {1}, pages = {65-75}, year = {2012}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2012.98}, abstract = {Recently, Nanotechnology has caused a vast breakthrough worldwide and scientists in different fields have used it. Nano particles have been gaining increasing attention and been applied in many fields to fabricate new material with novel function due to their unique physical and chemical properties. Therefore, using Nano-silica as a Nano-scale additive in concrete is under further inspection by researchers. Recent contribution to the development of building materials compromise adding colloidal Nano-silica to concrete. In this paper, the influence of Nano-silica addition on mechanical and durability properties of concrete as compared with silica fume has been studied. Tests include compressive strength, water permeability, rapid chloride penetration and electrical resistance test. Moreover, microstructure of the cement paste incorporating Nano-silica and Silica-fume were studied through X-ray diffraction and Scanning electron microscope tests. The experimental results show that Nano-silica as an artificial pozzolanic material can improve the compressive strength, water penetration resistance and electrical resistivity of concrete and reduce the chloride diffusion more effectively than SF at early ages. In addition, utilizing NS in cement paste improve its microstructure at early days.}, keywords = {Nano Silica,Silica fume,Mechanical Properties,Microstructure,Durability}, title_fa = {مقایسه اثرات نانو سیلیس و دودة سیلیس بر روی ریزساختار و دوام نمونه های بتنی}, abstract_fa = {فناوری نانو در سال­های اخیر سبب تحولات وسیعی در دانش بشری شده است و محققین علوم مختلف از آن بهره گرفته­اند. نانو ذرات به دلیل ویژگی­های خاص فیزیکی و شیمیایی در بسیاری از زمینه­ها برای ساخت مواد جدید با قابلیت­های منحصر به فرد به کار می­روند. از این رو استفاده از نانو سیلیس به عنوان یکی از محصولات فناوری نانو که می تواند نقش یک پوزولان مصنوعی بسیار فعال را در بتن ایفا نماید، مورد توجه قرار گرفته است. در این حال پیشرفت­های اخیر در زمینه فناوری مصالح ساختمانی، امکان استفاده از نانو سیلیس کلوئیدی را فراهم نموده است. در این مطالعه آزمایشگاهی، به بررسی خواص مکانیکی و دوامی بتن­های حاوی نانو سیلیس و دودة سیلیس یا آزمایش­هایی مانند مقاومت فشاری، نفوذ و جذب آب، نفوذ تسریع شده یون کلراید و مقاومت الکتریکی بتن پرداخته شده است. به علاوه، جهت مطالعه ریزساختار خمیر سیمان حاوی دودة سیلیس و نانو سیلیس نیز از آزمایش­های طیف­سنجی تفرق اشعه ایکس و تصاویر میکروسکوپ الکترونی روبشی  استفاده شده است. نتایج تحقیق نشان دهنده افزایش مقاومت فشاری با افزایش نانو سیلیس (37% افزایش مقاومت 3 روزه با افزودن 5/7 % نانو سیلیس) هستند. هم­چنین نانو سیلیس اثر بیشتری در کاهش نفوذپذیری بتن در مقابل آب و یون کلراید و افزایش مقاومت الکتریکی بتن (68% بهبود مقاومت در برابر یون کلراید و 56%  افزایش مقاومت الکتریکی در سن 28 روز با افزایش 5/7 درصد نانو سیلیس) در مقایسه با دودة سیلیس به خصوص در سنین اولیه دارد.}, keywords_fa = {Nano Silica,Silica fume,Mechanical Properties,Microstructure,Durability}, url = {https://ceej.aut.ac.ir/article_98.html}, eprint = {https://ceej.aut.ac.ir/article_98_da0d1c0aaaaa63a69703aafc21798a6d.pdf} } @article { author = {Kamali, Bahareh and Mousavi, seyed jamshid}, title = {Automatic Calibration of Hydrologic Event-Based Model Using PSO Meta-Heuristic Algorithm}, journal = {Amirkabir Journal of Civil Engineering}, volume = {44}, number = {1}, pages = {77-88}, year = {2012}, publisher = {Amirkabir University of Technology}, issn = {2588-297X}, eissn = {2588-2988}, doi = {10.22060/ceej.2012.100}, abstract = {The conceptual hydrologic HEC-HMS model that includes a library of different event-based models for simulating rainfall-runoff process has been gained a significant attention in different applications. Automatic calibration of HMS model has been considered in this study using particle swarm optimization (PSO) algorithm and its application has been assessed in modeling Tamar basin in North of IRAN. The PSO algorithm has been coded in MATLAB where the HMS model is called and run from through transferring to DOS applications. Firstly, Model calibration is performed in single event scenarios and the results were compared with Nelder and Mead local search algorithm method built in HMS model. The results revealed the outperformance of the proposed PSO-HMS model. Since no unique parameter set was obtained in single event scenarios, the model was employed to calibrate three calibration events jointly. Then all candidate parameter sets obtained from single and jointly-event calibration scenarios were tested in verification stage in which parameters of initial abstraction coefficients were recalibrated. The procedure resulted in choosing more suitable parameter sets to be screened out, although no unique parameter set can be obtained. }, keywords = {Event-based hydrologic model,HEC-HMS rainfall-runoff model,Particle Swarm Optimization,recalibration}, title_fa = {کالیبراسیون خودکار مدل هیدرولوژیکی رخدادپایه با استفاده از الگوریتم فراکاوشی PSO}, abstract_fa = {مدل هیدرولوژیکی مفهومی HEC-HMS شامل کتابخانه‌ای از انواع روش­های شبیه­های سازی فرایندهای هیدرولو‍ژیکی کاربرد وسیعی را در شبیه‌‌سازی فرآیند بارش-رواناب در سطح مطالعات کاربردی داشته است. در این مقاله کالیبراسیون خودکار مدل گفته شده با استفاده از الگوریتم فراکاوشی PSO بر روی مدل حوضه تمر از زیرحوضه‌های حوضه گرگانرود در استان گلستان، مورد توجه قرار گرفته است. این امر از طریق کدنویسی الگوریتم بهینه‌سازی در نرم­افزار مطلب، فراخوانی و اجرای HEC-HMS در این محیط با استفاده از محیط حدواسط DOS میسر شده است. کالیبراسیون مدل ابتدا در سناریوهای تک‌رخداده انجام شد که منجر نیل به دسته پارامترهای مختلف گردید. برای ارزیابی توانایی الگوریتم PSO در نیل به جواب­های مطلوب، نتایج رویکرد کالیبراسیون تک‌رخداده با نتایج کالیبراسیون شبه­خودکار مبتنی بر الگوریتم جستجوی محلی نلدرومید موجود در HMS مقایسه شد که نشان­دهنده کارایی الگوریتم PSO در اتصال به مدل هیدرولوژیکی است. در ادامه کالیبراسیون مدل در سناریوهای چندرخداده بررسی شد. دسته پارامترهای حاصل از رویکردهای تک و چند‌رخداده در رخداد صحت‌سنجی ارزیابی و با استفاده از مفهوم بازکالیبراسیون پارامترهای شرایط اولیه حوضه، فرآیند غربالگری دسته پارامترهای رقیب انجام پذیرفت. این روش با توجه به مشکل غیرمنفرد بودن مجموعه جواب­های مساله کالیبراسیون به عنوان یک مساله معکوس می‌تواند در محدود نمودن تعداد جواب­های کاندید موثر باشد. }, keywords_fa = {Event-based hydrologic model,HEC-HMS rainfall-runoff model,Particle Swarm Optimization,recalibration}, url = {https://ceej.aut.ac.ir/article_100.html}, eprint = {https://ceej.aut.ac.ir/article_100_eb2f7f2aeb2a72282a5379638ca4f8fd.pdf} }